Replace SDL_Atomic by stdatomic from C11

There is no reason to use SDL atomics.

DEVELOP.md

@@ -189,7 +189,7 @@ The client uses 4 threads:
    recording,
  - the **controller** thread, sending _control messages_ to the server,
  - the **receiver** thread (managed by the controller), receiving _device
-   messages_ from the client.
+   messages_ from the server.
 
 In addition, another thread can be started if necessary to handle APK
 installation or file push requests (via drag&drop on the main window) or to
@@ -214,7 +214,7 @@ When a new decoded frame is available, the decoder _swaps_ the decoding and
 rendering frame (with proper synchronization). Thus, it immediatly starts
 to decode a new frame while the main thread renders the last one.
 
-If a [recorder] is present (i.e. `--record` is enabled), then its muxes the raw
+If a [recorder] is present (i.e. `--record` is enabled), then it muxes the raw
 H.264 packet to the output video file.
 
 [stream]: https://github.com/Genymobile/scrcpy/blob/ffe0417228fb78ab45b7ee4e202fc06fc8875bf3/app/src/stream.h
@@ -282,6 +282,15 @@ meson x -Dserver_debugger=true
 meson configure x -Dserver_debugger=true
 ```
 
+If your device runs Android 8 or below, set the `server_debugger_method` to
+`old` in addition:
+
+```bash
+meson x -Dserver_debugger=true -Dserver_debugger_method=old
+# or, if x is already configured
+meson configure x -Dserver_debugger=true -Dserver_debugger_method=old
+```
+
 Then recompile.
 
 When you start scrcpy, it will start a debugger on port 5005 on the device.

LICENSE

@@ -188,7 +188,7 @@
       identification within third-party archives.
 
    Copyright (C) 2018 Genymobile
-   Copyright (C) 2018-2019 Romain Vimont
+   Copyright (C) 2018-2020 Romain Vimont
 
    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.

README.ko.md

@@ -475,7 +475,7 @@ _²화면이 꺼진 상태에서 우클릭 시 다시 켜지며, 그 외의 상
 ## 라이선스
 
     Copyright (C) 2018 Genymobile
-    Copyright (C) 2018-2019 Romain Vimont
+    Copyright (C) 2018-2020 Romain Vimont
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.

README.md

@@ -37,8 +37,11 @@ control it using keyboard and mouse.
 
 ### Linux
 
-On Linux, you typically need to [build the app manually][BUILD]. Don't worry,
-it's not that hard.
+In Debian (_testing_ and _sid_ for now):
+
+```
+apt install scrcpy
+```
 
 A [Snap] package is available: [`scrcpy`][snap-link].
 
@@ -56,6 +59,10 @@ For Gentoo, an [Ebuild] is available: [`scrcpy/`][ebuild-link].
 [Ebuild]: https://wiki.gentoo.org/wiki/Ebuild
 [ebuild-link]: https://github.com/maggu2810/maggu2810-overlay/tree/master/app-mobilephone/scrcpy
 
+You could also [build the app manually][BUILD] (don't worry, it's not that
+hard).
+
+
 
 ### Windows
 
@@ -70,6 +77,20 @@ For Windows, for simplicity, prebuilt archives with all the dependencies
 [direct-win32]: https://github.com/Genymobile/scrcpy/releases/download/v1.12.1/scrcpy-win32-v1.12.1.zip
 [direct-win64]: https://github.com/Genymobile/scrcpy/releases/download/v1.12.1/scrcpy-win64-v1.12.1.zip
 
+It is also available in [Chocolatey]:
+
+[Chocolatey]: https://chocolatey.org/
+
+```bash
+choco install scrcpy
+```
+
+You need `adb`, accessible from your `PATH`. If you don't have it yet:
+
+```bash
+choco install adb
+```
+
 You can also [build the app manually][BUILD].
 
 
@@ -158,6 +179,21 @@ scrcpy --crop 1224:1440:0:0   # 1224x1440 at offset (0,0)
 If `--max-size` is also specified, resizing is applied after cropping.
 
 
+#### Lock video orientation
+
+
+To lock the orientation of the mirroring:
+
+```bash
+scrcpy --lock-video-orientation 0   # natural orientation
+scrcpy --lock-video-orientation 1   # 90° counterclockwise
+scrcpy --lock-video-orientation 2   # 180°
+scrcpy --lock-video-orientation 3   # 90° clockwise
+```
+
+This affects recording orientation.
+
+
 ### Recording
 
 It is possible to record the screen while mirroring:
@@ -216,8 +252,25 @@ scrcpy --serial 0123456789abcdef
 scrcpy -s 0123456789abcdef  # short version
 ```
 
+If the device is connected over TCP/IP:
+
+```bash
+scrcpy --serial 192.168.0.1:5555
+scrcpy -s 192.168.0.1:5555  # short version
+```
+
 You can start several instances of _scrcpy_ for several devices.
 
+#### Autostart on device connection
+
+You could use [AutoAdb]:
+
+```bash
+autoadb scrcpy -s '{}'
+```
+
+[AutoAdb]: https://github.com/rom1v/usbaudio
+
 #### SSH tunnel
 
 To connect to a remote device, it is possible to connect a local `adb` client to
@@ -300,6 +353,21 @@ scrcpy --no-control
 scrcpy -n
 ```
 
+#### Display
+
+If several displays are available, it is possible to select the display to
+mirror:
+
+```bash
+scrcpy --display 1
+```
+
+The list of display ids can be retrieved by:
+
+```
+adb shell dumpsys display   # search "mDisplayId=" in the output
+```
+
 #### Turn screen off
 
 It is possible to turn the device screen off while mirroring on start with a
@@ -491,7 +559,7 @@ Read the [developers page].
 ## Licence
 
     Copyright (C) 2018 Genymobile
-    Copyright (C) 2018-2019 Romain Vimont
+    Copyright (C) 2018-2020 Romain Vimont
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.

app/meson.build

@@ -105,6 +105,12 @@ conf.set('DEFAULT_LOCAL_PORT_RANGE_LAST', '27199')
 # overridden by option --max-size
 conf.set('DEFAULT_MAX_SIZE', '0')  # 0: unlimited
 
+# the default video orientation
+# natural device orientation is 0 and each increment adds 90 degrees
+# counterclockwise
+# overridden by option --lock-video-orientation
+conf.set('DEFAULT_LOCK_VIDEO_ORIENTATION', '-1')  # -1: unlocked
+
 # the default video bitrate, in bits/second
 # overridden by option --bit-rate
 conf.set('DEFAULT_BIT_RATE', '8000000')  # 8Mbps
@@ -118,6 +124,9 @@ conf.set('WINDOWS_NOCONSOLE', get_option('windows_noconsole'))
 # run a server debugger and wait for a client to be attached
 conf.set('SERVER_DEBUGGER', get_option('server_debugger'))
 
+# select the debugger method ('old' for Android < 9, 'new' for Android >= 9)
+conf.set('SERVER_DEBUGGER_METHOD_NEW', get_option('server_debugger_method') == 'new')
+
 configure_file(configuration: conf, output: 'config.h')
 
 src_dir = include_directories('src')

app/scrcpy.1

@@ -33,6 +33,15 @@ The values are expressed in the device natural orientation (typically, portrait
 .B \-\-max\-size
 value is computed on the cropped size.
 
+.TP
+.BI "\-\-display " id
+Specify the display id to mirror.
+
+The list of possible display ids can be listed by "adb shell dumpsys display"
+(search "mDisplayId=" in the output).
+
+Default is 0.
+
 .TP
 .B \-f, \-\-fullscreen
 Start in fullscreen.
@@ -41,6 +50,12 @@ Start in fullscreen.
 .B \-h, \-\-help
 Print this help.
 
+.TP
+.BI "\-\-lock\-video\-orientation " value
+Lock video orientation to \fIvalue\fR. Values are integers in the range [-1..3]. Natural device orientation is 0 and each increment adds 90 degrees counterclockwise.
+
+Default is -1 (unlocked).
+
 .TP
 .BI "\-\-max\-fps " value
 Limit the framerate of screen capture (officially supported since Android 10, but may work on earlier versions).
@@ -125,13 +140,13 @@ Set a custom window title.
 .BI "\-\-window\-x " value
 Set the initial window horizontal position.
 
-Default is -1 (automatic).\n
+Default is "auto".\n
 
 .TP
 .BI "\-\-window\-y " value
 Set the initial window vertical position.
 
-Default is -1 (automatic).\n
+Default is "auto".\n
 
 .TP
 .BI "\-\-window\-width " value
@@ -261,7 +276,7 @@ Copyright \(co 2018 Genymobile
 Genymobile
 .UE
 
-Copyright \(co 2018\-2019
+Copyright \(co 2018\-2020
 .MT rom@rom1v.com
 Romain Vimont
 .ME

app/src/cli.c

@@ -1,5 +1,6 @@
 #include "cli.h"
 
+#include <assert.h>
 #include <getopt.h>
 #include <stdint.h>
 #include <unistd.h>
@@ -35,12 +36,27 @@ scrcpy_print_usage(const char *arg0) {
         "        (typically, portrait for a phone, landscape for a tablet).\n"
         "        Any --max-size value is computed on the cropped size.\n"
         "\n"
+        "    --display id\n"
+        "        Specify the display id to mirror.\n"
+        "\n"
+        "        The list of possible display ids can be listed by:\n"
+        "            adb shell dumpsys display\n"
+        "        (search \"mDisplayId=\" in the output)\n"
+        "\n"
+        "        Default is 0.\n"
+        "\n"
         "    -f, --fullscreen\n"
         "        Start in fullscreen.\n"
         "\n"
         "    -h, --help\n"
         "        Print this help.\n"
         "\n"
+        "    --lock-video-orientation value\n"
+        "        Lock video orientation to value. Values are integers in the\n"
+        "        range [-1..3]. Natural device orientation is 0 and each\n"
+        "        increment adds 90 degrees counterclockwise.\n"
+        "        Default is %d%s.\n"
+        "\n"
         "    --max-fps value\n"
         "        Limit the frame rate of screen capture (officially supported\n"
         "        since Android 10, but may work on earlier versions).\n"
@@ -110,11 +126,11 @@ scrcpy_print_usage(const char *arg0) {
         "\n"
         "    --window-x value\n"
         "        Set the initial window horizontal position.\n"
-        "        Default is -1 (automatic).\n"
+        "        Default is \"auto\".\n"
         "\n"
         "    --window-y value\n"
         "        Set the initial window vertical position.\n"
-        "        Default is -1 (automatic).\n"
+        "        Default is \"auto\".\n"
         "\n"
         "    --window-width value\n"
         "        Set the initial window width.\n"
@@ -192,6 +208,7 @@ scrcpy_print_usage(const char *arg0) {
         "\n",
         arg0,
         DEFAULT_BIT_RATE,
+        DEFAULT_LOCK_VIDEO_ORIENTATION, DEFAULT_LOCK_VIDEO_ORIENTATION >= 0 ? "" : " (unlocked)",
         DEFAULT_MAX_SIZE, DEFAULT_MAX_SIZE ? "" : " (unlimited)",
         DEFAULT_LOCAL_PORT_RANGE_FIRST, DEFAULT_LOCAL_PORT_RANGE_LAST);
 }
@@ -281,9 +298,30 @@ parse_max_fps(const char *s, uint16_t *max_fps) {
 }
 
 static bool
-parse_window_position(const char *s, int16_t *position) {
+parse_lock_video_orientation(const char *s, int8_t *lock_video_orientation) {
     long value;
-    bool ok = parse_integer_arg(s, &value, false, -1, 0x7FFF,
+    bool ok = parse_integer_arg(s, &value, false, -1, 3,
+                                "lock video orientation");
+    if (!ok) {
+        return false;
+    }
+
+    *lock_video_orientation = (int8_t) value;
+    return true;
+}
+
+static bool
+parse_window_position(const char *s, int16_t *position) {
+    // special value for "auto"
+    static_assert(WINDOW_POSITION_UNDEFINED == -0x8000, "unexpected value");
+
+    if (!strcmp(s, "auto")) {
+        *position = WINDOW_POSITION_UNDEFINED;
+        return true;
+    }
+
+    long value;
+    bool ok = parse_integer_arg(s, &value, false, -0x7FFF, 0x7FFF,
                                 "window position");
     if (!ok) {
         return false;
@@ -334,6 +372,18 @@ parse_port_range(const char *s, struct port_range *port_range) {
     return true;
 }
 
+static bool
+parse_display_id(const char *s, uint16_t *display_id) {
+    long value;
+    bool ok = parse_integer_arg(s, &value, false, 0, 0xFFFF, "display id");
+    if (!ok) {
+        return false;
+    }
+
+    *display_id = (uint16_t) value;
+    return true;
+}
+
 static bool
 parse_record_format(const char *optarg, enum recorder_format *format) {
     if (!strcmp(optarg, "mp4")) {
@@ -364,51 +414,56 @@ guess_record_format(const char *filename) {
     return 0;
 }
 
-#define OPT_RENDER_EXPIRED_FRAMES 1000
-#define OPT_WINDOW_TITLE          1001
-#define OPT_PUSH_TARGET           1002
-#define OPT_ALWAYS_ON_TOP         1003
-#define OPT_CROP                  1004
-#define OPT_RECORD_FORMAT         1005
-#define OPT_PREFER_TEXT           1006
-#define OPT_WINDOW_X              1007
-#define OPT_WINDOW_Y              1008
-#define OPT_WINDOW_WIDTH          1009
-#define OPT_WINDOW_HEIGHT         1010
-#define OPT_WINDOW_BORDERLESS     1011
-#define OPT_MAX_FPS               1012
+#define OPT_RENDER_EXPIRED_FRAMES  1000
+#define OPT_WINDOW_TITLE           1001
+#define OPT_PUSH_TARGET            1002
+#define OPT_ALWAYS_ON_TOP          1003
+#define OPT_CROP                   1004
+#define OPT_RECORD_FORMAT          1005
+#define OPT_PREFER_TEXT            1006
+#define OPT_WINDOW_X               1007
+#define OPT_WINDOW_Y               1008
+#define OPT_WINDOW_WIDTH           1009
+#define OPT_WINDOW_HEIGHT          1010
+#define OPT_WINDOW_BORDERLESS      1011
+#define OPT_MAX_FPS                1012
+#define OPT_LOCK_VIDEO_ORIENTATION 1013
+#define OPT_DISPLAY_ID             1014
 
 bool
 scrcpy_parse_args(struct scrcpy_cli_args *args, int argc, char *argv[]) {
     static const struct option long_options[] = {
-        {"always-on-top",         no_argument,       NULL, OPT_ALWAYS_ON_TOP},
-        {"bit-rate",              required_argument, NULL, 'b'},
-        {"crop",                  required_argument, NULL, OPT_CROP},
-        {"fullscreen",            no_argument,       NULL, 'f'},
-        {"help",                  no_argument,       NULL, 'h'},
-        {"max-fps",               required_argument, NULL, OPT_MAX_FPS},
-        {"max-size",              required_argument, NULL, 'm'},
-        {"no-control",            no_argument,       NULL, 'n'},
-        {"no-display",            no_argument,       NULL, 'N'},
-        {"port",                  required_argument, NULL, 'p'},
-        {"push-target",           required_argument, NULL, OPT_PUSH_TARGET},
-        {"record",                required_argument, NULL, 'r'},
-        {"record-format",         required_argument, NULL, OPT_RECORD_FORMAT},
-        {"render-expired-frames", no_argument,       NULL,
-                                                     OPT_RENDER_EXPIRED_FRAMES},
-        {"serial",                required_argument, NULL, 's'},
-        {"show-touches",          no_argument,       NULL, 't'},
-        {"turn-screen-off",       no_argument,       NULL, 'S'},
-        {"prefer-text",           no_argument,       NULL, OPT_PREFER_TEXT},
-        {"version",               no_argument,       NULL, 'v'},
-        {"window-title",          required_argument, NULL, OPT_WINDOW_TITLE},
-        {"window-x",              required_argument, NULL, OPT_WINDOW_X},
-        {"window-y",              required_argument, NULL, OPT_WINDOW_Y},
-        {"window-width",          required_argument, NULL, OPT_WINDOW_WIDTH},
-        {"window-height",         required_argument, NULL, OPT_WINDOW_HEIGHT},
-        {"window-borderless",     no_argument,       NULL,
-                                                     OPT_WINDOW_BORDERLESS},
-        {NULL,                    0,                 NULL, 0  },
+        {"always-on-top",          no_argument,       NULL, OPT_ALWAYS_ON_TOP},
+        {"bit-rate",               required_argument, NULL, 'b'},
+        {"crop",                   required_argument, NULL, OPT_CROP},
+        {"display",                required_argument, NULL, OPT_DISPLAY_ID},
+        {"fullscreen",             no_argument,       NULL, 'f'},
+        {"help",                   no_argument,       NULL, 'h'},
+        {"lock-video-orientation", required_argument, NULL,
+                                                  OPT_LOCK_VIDEO_ORIENTATION},
+        {"max-fps",                required_argument, NULL, OPT_MAX_FPS},
+        {"max-size",               required_argument, NULL, 'm'},
+        {"no-control",             no_argument,       NULL, 'n'},
+        {"no-display",             no_argument,       NULL, 'N'},
+        {"port",                   required_argument, NULL, 'p'},
+        {"push-target",            required_argument, NULL, OPT_PUSH_TARGET},
+        {"record",                 required_argument, NULL, 'r'},
+        {"record-format",          required_argument, NULL, OPT_RECORD_FORMAT},
+        {"render-expired-frames",  no_argument,       NULL,
+                                                  OPT_RENDER_EXPIRED_FRAMES},
+        {"serial",                 required_argument, NULL, 's'},
+        {"show-touches",           no_argument,       NULL, 't'},
+        {"turn-screen-off",        no_argument,       NULL, 'S'},
+        {"prefer-text",            no_argument,       NULL, OPT_PREFER_TEXT},
+        {"version",                no_argument,       NULL, 'v'},
+        {"window-title",           required_argument, NULL, OPT_WINDOW_TITLE},
+        {"window-x",               required_argument, NULL, OPT_WINDOW_X},
+        {"window-y",               required_argument, NULL, OPT_WINDOW_Y},
+        {"window-width",           required_argument, NULL, OPT_WINDOW_WIDTH},
+        {"window-height",          required_argument, NULL, OPT_WINDOW_HEIGHT},
+        {"window-borderless",      no_argument,       NULL,
+                                                  OPT_WINDOW_BORDERLESS},
+        {NULL,                     0,                 NULL, 0  },
     };
 
     struct scrcpy_options *opts = &args->opts;
@@ -430,6 +485,11 @@ scrcpy_parse_args(struct scrcpy_cli_args *args, int argc, char *argv[]) {
             case OPT_CROP:
                 opts->crop = optarg;
                 break;
+            case OPT_DISPLAY_ID:
+                if (!parse_display_id(optarg, &opts->display_id)) {
+                    return false;
+                }
+                break;
             case 'f':
                 opts->fullscreen = true;
                 break;
@@ -454,6 +514,11 @@ scrcpy_parse_args(struct scrcpy_cli_args *args, int argc, char *argv[]) {
                     return false;
                 }
                 break;
+            case OPT_LOCK_VIDEO_ORIENTATION:
+                if (!parse_lock_video_orientation(optarg, &opts->lock_video_orientation)) {
+                    return false;
+                }
+                break;
             case 'n':
                 opts->control = false;
                 break;

app/src/event_converter.c

@@ -94,6 +94,23 @@ convert_keycode(SDL_Keycode from, enum android_keycode *to, uint16_t mod,
         MAP(SDLK_UP,           AKEYCODE_DPAD_UP);
     }
 
+    if (!(mod & (KMOD_NUM | KMOD_SHIFT))) {
+        // Handle Numpad events when Num Lock is disabled
+        // If SHIFT is pressed, a text event will be sent instead
+        switch(from) {
+            MAP(SDLK_KP_0,            AKEYCODE_INSERT);
+            MAP(SDLK_KP_1,            AKEYCODE_MOVE_END);
+            MAP(SDLK_KP_2,            AKEYCODE_DPAD_DOWN);
+            MAP(SDLK_KP_3,            AKEYCODE_PAGE_DOWN);
+            MAP(SDLK_KP_4,            AKEYCODE_DPAD_LEFT);
+            MAP(SDLK_KP_6,            AKEYCODE_DPAD_RIGHT);
+            MAP(SDLK_KP_7,            AKEYCODE_MOVE_HOME);
+            MAP(SDLK_KP_8,            AKEYCODE_DPAD_UP);
+            MAP(SDLK_KP_9,            AKEYCODE_PAGE_UP);
+            MAP(SDLK_KP_PERIOD,       AKEYCODE_FORWARD_DEL);
+        }
+    }
+
     if (prefer_text) {
         // do not forward alpha and space key events
         return false;

app/src/fps_counter.c

@@ -23,7 +23,7 @@ fps_counter_init(struct fps_counter *counter) {
     }
 
     counter->thread = NULL;
-    SDL_AtomicSet(&counter->started, 0);
+    atomic_init(&counter->started, 0);
     // no need to initialize the other fields, they are unused until started
 
     return true;
@@ -35,6 +35,16 @@ fps_counter_destroy(struct fps_counter *counter) {
     SDL_DestroyMutex(counter->mutex);
 }
 
+static inline bool
+is_started(struct fps_counter *counter) {
+    return atomic_load_explicit(&counter->started, memory_order_acquire);
+}
+
+static inline void
+set_started(struct fps_counter *counter, bool started) {
+    atomic_store_explicit(&counter->started, started, memory_order_release);
+}
+
 // must be called with mutex locked
 static void
 display_fps(struct fps_counter *counter) {
@@ -70,10 +80,10 @@ run_fps_counter(void *data) {
 
     mutex_lock(counter->mutex);
     while (!counter->interrupted) {
-        while (!counter->interrupted && !SDL_AtomicGet(&counter->started)) {
+        while (!counter->interrupted && !is_started(counter)) {
             cond_wait(counter->state_cond, counter->mutex);
         }
-        while (!counter->interrupted && SDL_AtomicGet(&counter->started)) {
+        while (!counter->interrupted && is_started(counter)) {
             uint32_t now = SDL_GetTicks();
             check_interval_expired(counter, now);
 
@@ -96,7 +106,7 @@ fps_counter_start(struct fps_counter *counter) {
     counter->nr_skipped = 0;
     mutex_unlock(counter->mutex);
 
-    SDL_AtomicSet(&counter->started, 1);
+    set_started(counter, true);
     cond_signal(counter->state_cond);
 
     // counter->thread is always accessed from the same thread, no need to lock
@@ -114,13 +124,13 @@ fps_counter_start(struct fps_counter *counter) {
 
 void
 fps_counter_stop(struct fps_counter *counter) {
-    SDL_AtomicSet(&counter->started, 0);
+    set_started(counter, false);
     cond_signal(counter->state_cond);
 }
 
 bool
 fps_counter_is_started(struct fps_counter *counter) {
-    return SDL_AtomicGet(&counter->started);
+    return is_started(counter);
 }
 
 void
@@ -145,7 +155,7 @@ fps_counter_join(struct fps_counter *counter) {
 
 void
 fps_counter_add_rendered_frame(struct fps_counter *counter) {
-    if (!SDL_AtomicGet(&counter->started)) {
+    if (!is_started(counter)) {
         return;
     }
 
@@ -158,7 +168,7 @@ fps_counter_add_rendered_frame(struct fps_counter *counter) {
 
 void
 fps_counter_add_skipped_frame(struct fps_counter *counter) {
-    if (!SDL_AtomicGet(&counter->started)) {
+    if (!is_started(counter)) {
         return;
     }
 

app/src/fps_counter.h

@@ -1,9 +1,9 @@
 #ifndef FPSCOUNTER_H
 #define FPSCOUNTER_H
 
+#include <stdatomic.h>
 #include <stdbool.h>
 #include <stdint.h>
-#include <SDL2/SDL_atomic.h>
 #include <SDL2/SDL_mutex.h>
 #include <SDL2/SDL_thread.h>
 
@@ -16,7 +16,7 @@ struct fps_counter {
 
     // atomic so that we can check without locking the mutex
     // if the FPS counter is disabled, we don't want to lock unnecessarily
-    SDL_atomic_t started;
+    atomic_bool started;
 
     // the following fields are protected by the mutex
     bool interrupted;

app/src/scrcpy.c

@@ -60,9 +60,9 @@ sdl_init_and_configure(bool display) {
         return true;
     }
 
-    // Use the best available scale quality
-    if (!SDL_SetHint(SDL_HINT_RENDER_SCALE_QUALITY, "2")) {
-        LOGW("Could not enable bilinear filtering");
+    // Linear filtering
+    if (!SDL_SetHint(SDL_HINT_RENDER_SCALE_QUALITY, "1")) {
+        LOGW("Could not enable linear filtering");
     }
 
 #ifdef SCRCPY_SDL_HAS_HINT_MOUSE_FOCUS_CLICKTHROUGH
@@ -284,7 +284,9 @@ scrcpy(const struct scrcpy_options *options) {
         .max_size = options->max_size,
         .bit_rate = options->bit_rate,
         .max_fps = options->max_fps,
+        .lock_video_orientation = options->lock_video_orientation,
         .control = options->control,
+        .display_id = options->display_id,
     };
     if (!server_start(&server, options->serial, &params)) {
         return false;

app/src/scrcpy.h

@@ -20,10 +20,12 @@ struct scrcpy_options {
     uint16_t max_size;
     uint32_t bit_rate;
     uint16_t max_fps;
-    int16_t window_x;
-    int16_t window_y;
+    int8_t lock_video_orientation;
+    int16_t window_x; // WINDOW_POSITION_UNDEFINED for "auto"
+    int16_t window_y; // WINDOW_POSITION_UNDEFINED for "auto"
     uint16_t window_width;
     uint16_t window_height;
+    uint16_t display_id;
     bool show_touches;
     bool fullscreen;
     bool always_on_top;
@@ -49,10 +51,12 @@ struct scrcpy_options {
     .max_size = DEFAULT_MAX_SIZE, \
     .bit_rate = DEFAULT_BIT_RATE, \
     .max_fps = 0, \
-    .window_x = -1, \
-    .window_y = -1, \
+    .lock_video_orientation = DEFAULT_LOCK_VIDEO_ORIENTATION, \
+    .window_x = WINDOW_POSITION_UNDEFINED, \
+    .window_y = WINDOW_POSITION_UNDEFINED, \
     .window_width = 0, \
     .window_height = 0, \
+    .display_id = 0, \
     .show_touches = false, \
     .fullscreen = false, \
     .always_on_top = false, \

app/src/screen.c

@@ -186,8 +186,10 @@ screen_init_rendering(struct screen *screen, const char *window_title,
         window_flags |= SDL_WINDOW_BORDERLESS;
     }
 
-    int x = window_x != -1 ? window_x : (int) SDL_WINDOWPOS_UNDEFINED;
-    int y = window_y != -1 ? window_y : (int) SDL_WINDOWPOS_UNDEFINED;
+    int x = window_x != WINDOW_POSITION_UNDEFINED
+          ? window_x : (int) SDL_WINDOWPOS_UNDEFINED;
+    int y = window_y != WINDOW_POSITION_UNDEFINED
+          ? window_y : (int) SDL_WINDOWPOS_UNDEFINED;
     screen->window = SDL_CreateWindow(window_title, x, y,
                                       window_size.width, window_size.height,
                                       window_flags);

app/src/screen.h

@@ -8,6 +8,8 @@
 #include "config.h"
 #include "common.h"
 
+#define WINDOW_POSITION_UNDEFINED (-0x8000)
+
 struct video_buffer;
 
 struct screen {
@@ -53,6 +55,7 @@ void
 screen_init(struct screen *screen);
 
 // initialize screen, create window, renderer and texture (window is hidden)
+// window_x and window_y accept WINDOW_POSITION_UNDEFINED
 bool
 screen_init_rendering(struct screen *screen, const char *window_title,
                       struct size frame_size, bool always_on_top,

app/src/server.c

@@ -5,6 +5,7 @@
 #include <inttypes.h>
 #include <libgen.h>
 #include <stdio.h>
+#include <SDL2/SDL_thread.h>
 #include <SDL2/SDL_timer.h>
 #include <SDL2/SDL_platform.h>
 
@@ -233,16 +234,26 @@ execute_server(struct server *server, const struct server_params *params) {
     char max_size_string[6];
     char bit_rate_string[11];
     char max_fps_string[6];
+    char lock_video_orientation_string[3];
+    char display_id_string[6];
     sprintf(max_size_string, "%"PRIu16, params->max_size);
     sprintf(bit_rate_string, "%"PRIu32, params->bit_rate);
     sprintf(max_fps_string, "%"PRIu16, params->max_fps);
+    sprintf(lock_video_orientation_string, "%"PRIi8, params->lock_video_orientation);
+    sprintf(display_id_string, "%"PRIu16, params->display_id);
     const char *const cmd[] = {
         "shell",
         "CLASSPATH=" DEVICE_SERVER_PATH,
         "app_process",
 #ifdef SERVER_DEBUGGER
 # define SERVER_DEBUGGER_PORT "5005"
+# ifdef SERVER_DEBUGGER_METHOD_NEW
+        /* Android 9 and above */
+        "-XjdwpProvider:internal -XjdwpOptions:transport=dt_socket,suspend=y,server=y,address="
+# else
+        /* Android 8 and below */
         "-agentlib:jdwp=transport=dt_socket,suspend=y,server=y,address="
+# endif
             SERVER_DEBUGGER_PORT,
 #endif
         "/", // unused
@@ -251,10 +262,12 @@ execute_server(struct server *server, const struct server_params *params) {
         max_size_string,
         bit_rate_string,
         max_fps_string,
+        lock_video_orientation_string,
         server->tunnel_forward ? "true" : "false",
         params->crop ? params->crop : "-",
         "true", // always send frame meta (packet boundaries + timestamp)
         params->control ? "true" : "false",
+        display_id_string,
     };
 #ifdef SERVER_DEBUGGER
     LOGI("Server debugger waiting for a client on device port "
@@ -305,14 +318,12 @@ connect_to_server(uint16_t port, uint32_t attempts, uint32_t delay) {
 }
 
 static void
-close_socket(socket_t *socket) {
-    assert(*socket != INVALID_SOCKET);
-    net_shutdown(*socket, SHUT_RDWR);
-    if (!net_close(*socket)) {
+close_socket(socket_t socket) {
+    assert(socket != INVALID_SOCKET);
+    net_shutdown(socket, SHUT_RDWR);
+    if (!net_close(socket)) {
         LOGW("Could not close socket");
-        return;
     }
-    *socket = INVALID_SOCKET;
 }
 
 void
@@ -320,6 +331,22 @@ server_init(struct server *server) {
     *server = (struct server) SERVER_INITIALIZER;
 }
 
+static int
+run_wait_server(void *data) {
+    struct server *server = data;
+    cmd_simple_wait(server->process, NULL); // ignore exit code
+    // no need for synchronization, server_socket is initialized before this
+    // thread was created
+    if (server->server_socket != INVALID_SOCKET
+            && !atomic_flag_test_and_set(&server->server_socket_closed)) {
+        // On Linux, accept() is unblocked by shutdown(), but on Windows, it is
+        // unblocked by closesocket(). Therefore, call both (close_socket()).
+        close_socket(server->server_socket);
+    }
+    LOGD("Server terminated");
+    return 0;
+}
+
 bool
 server_start(struct server *server, const char *serial,
              const struct server_params *params) {
@@ -333,30 +360,49 @@ server_start(struct server *server, const char *serial,
     }
 
     if (!push_server(serial)) {
-        SDL_free(server->serial);
-        return false;
+        goto error1;
     }
 
     if (!enable_tunnel_any_port(server, params->port_range)) {
-        SDL_free(server->serial);
-        return false;
+        goto error1;
     }
 
     // server will connect to our server socket
     server->process = execute_server(server, params);
-
     if (server->process == PROCESS_NONE) {
-        if (!server->tunnel_forward) {
-            close_socket(&server->server_socket);
-        }
-        disable_tunnel(server);
-        SDL_free(server->serial);
-        return false;
+        goto error2;
+    }
+
+    // If the server process dies before connecting to the server socket, then
+    // the client will be stuck forever on accept(). To avoid the problem, we
+    // must be able to wake up the accept() call when the server dies. To keep
+    // things simple and multiplatform, just spawn a new thread waiting for the
+    // server process and calling shutdown()/close() on the server socket if
+    // necessary to wake up any accept() blocking call.
+    server->wait_server_thread =
+        SDL_CreateThread(run_wait_server, "wait-server", server);
+    if (!server->wait_server_thread) {
+        cmd_terminate(server->process);
+        cmd_simple_wait(server->process, NULL); // ignore exit code
+        goto error2;
     }
 
     server->tunnel_enabled = true;
 
     return true;
+
+error2:
+    if (!server->tunnel_forward) {
+        bool was_closed =
+            atomic_flag_test_and_set(&server->server_socket_closed);
+        // the thread is not started, the flag could not be already set
+        assert(!was_closed);
+        close_socket(server->server_socket);
+    }
+    disable_tunnel(server);
+error1:
+    SDL_free(server->serial);
+    return false;
 }
 
 bool
@@ -374,7 +420,11 @@ server_connect_to(struct server *server) {
         }
 
         // we don't need the server socket anymore
-        close_socket(&server->server_socket);
+        if (!atomic_flag_test_and_set(&server->server_socket_closed)) {
+            // close it from here
+            close_socket(server->server_socket);
+            // otherwise, it is closed by run_wait_server()
+        }
     } else {
         uint32_t attempts = 100;
         uint32_t delay = 100; // ms
@@ -401,29 +451,27 @@ server_connect_to(struct server *server) {
 
 void
 server_stop(struct server *server) {
-    if (server->server_socket != INVALID_SOCKET) {
-        close_socket(&server->server_socket);
+    if (server->server_socket != INVALID_SOCKET
+            && !atomic_flag_test_and_set(&server->server_socket_closed)) {
+        close_socket(server->server_socket);
     }
     if (server->video_socket != INVALID_SOCKET) {
-        close_socket(&server->video_socket);
+        close_socket(server->video_socket);
     }
     if (server->control_socket != INVALID_SOCKET) {
-        close_socket(&server->control_socket);
+        close_socket(server->control_socket);
     }
 
     assert(server->process != PROCESS_NONE);
 
-    if (!cmd_terminate(server->process)) {
-        LOGW("Could not terminate server");
-    }
-
-    cmd_simple_wait(server->process, NULL); // ignore exit code
-    LOGD("Server terminated");
+    cmd_terminate(server->process);
 
     if (server->tunnel_enabled) {
         // ignore failure
         disable_tunnel(server);
     }
+
+    SDL_WaitThread(server->wait_server_thread, NULL);
 }
 
 void

app/src/server.h

@@ -1,8 +1,10 @@
 #ifndef SERVER_H
 #define SERVER_H
 
+#include <stdatomic.h>
 #include <stdbool.h>
 #include <stdint.h>
+#include <SDL2/SDL_thread.h>
 
 #include "config.h"
 #include "command.h"
@@ -12,6 +14,8 @@
 struct server {
     char *serial;
     process_t process;
+    SDL_Thread *wait_server_thread;
+    atomic_flag server_socket_closed;
     socket_t server_socket; // only used if !tunnel_forward
     socket_t video_socket;
     socket_t control_socket;
@@ -24,6 +28,8 @@ struct server {
 #define SERVER_INITIALIZER { \
     .serial = NULL, \
     .process = PROCESS_NONE, \
+    .wait_server_thread = NULL, \
+    .server_socket_closed = ATOMIC_FLAG_INIT, \
     .server_socket = INVALID_SOCKET, \
     .video_socket = INVALID_SOCKET, \
     .control_socket = INVALID_SOCKET, \
@@ -42,7 +48,9 @@ struct server_params {
     uint16_t max_size;
     uint32_t bit_rate;
     uint16_t max_fps;
+    int8_t lock_video_orientation;
     bool control;
+    uint16_t display_id;
 };
 
 // init default values

app/tests/test_cli.c

@@ -48,6 +48,7 @@ static void test_options(void) {
         "--fullscreen",
         "--max-fps", "30",
         "--max-size", "1024",
+        "--lock-video-orientation", "2",
         // "--no-control" is not compatible with "--turn-screen-off"
         // "--no-display" is not compatible with "--fulscreen"
         "--port", "1234:1236",
@@ -78,6 +79,7 @@ static void test_options(void) {
     assert(opts->fullscreen);
     assert(opts->max_fps == 30);
     assert(opts->max_size == 1024);
+    assert(opts->lock_video_orientation == 2);
     assert(opts->port_range.first == 1234);
     assert(opts->port_range.last == 1236);
     assert(!strcmp(opts->push_target, "/sdcard/Movies"));

config/checkstyle/checkstyle.xml

@@ -129,11 +129,6 @@ page at http://checkstyle.sourceforge.net/config.html -->
     </module>
     <module name="IllegalInstantiation" />
     <module name="InnerAssignment" />
-    <module name="MagicNumber">
-      <property name="severity" value="info" />
-      <property name="ignoreHashCodeMethod" value="true" />
-      <property name="ignoreAnnotation" value="true" />
-    </module>
     <module name="MissingSwitchDefault" />
     <module name="SimplifyBooleanExpression" />
     <module name="SimplifyBooleanReturn" />

meson_options.txt

@@ -6,3 +6,4 @@ option('prebuilt_server', type: 'string', description: 'Path of the prebuilt ser
 option('portable', type: 'boolean', value: false, description: 'Use scrcpy-server from the same directory as the scrcpy executable')
 option('hidpi_support', type: 'boolean', value: true, description: 'Enable High DPI support')
 option('server_debugger', type: 'boolean', value: false, description: 'Run a server debugger and wait for a client to be attached')
+option('server_debugger_method', type: 'combo', choices: ['old', 'new'], value: 'new', description: 'Select the debugger method (Android < 9: "old", Android >= 9: "new")')

server/src/main/java/com/genymobile/scrcpy/ControlMessageReader.java

@@ -8,11 +8,10 @@ import java.nio.charset.StandardCharsets;
 
 public class ControlMessageReader {
 
-    private static final int INJECT_KEYCODE_PAYLOAD_LENGTH = 9;
-    private static final int INJECT_MOUSE_EVENT_PAYLOAD_LENGTH = 17;
-    private static final int INJECT_TOUCH_EVENT_PAYLOAD_LENGTH = 21;
-    private static final int INJECT_SCROLL_EVENT_PAYLOAD_LENGTH = 20;
-    private static final int SET_SCREEN_POWER_MODE_PAYLOAD_LENGTH = 1;
+    static final int INJECT_KEYCODE_PAYLOAD_LENGTH = 9;
+    static final int INJECT_TOUCH_EVENT_PAYLOAD_LENGTH = 27;
+    static final int INJECT_SCROLL_EVENT_PAYLOAD_LENGTH = 20;
+    static final int SET_SCREEN_POWER_MODE_PAYLOAD_LENGTH = 1;
 
     public static final int TEXT_MAX_LENGTH = 300;
     public static final int CLIPBOARD_TEXT_MAX_LENGTH = 4093;
@@ -122,7 +121,6 @@ public class ControlMessageReader {
         return ControlMessage.createInjectText(text);
     }
 
-    @SuppressWarnings("checkstyle:MagicNumber")
     private ControlMessage parseInjectTouchEvent() {
         if (buffer.remaining() < INJECT_TOUCH_EVENT_PAYLOAD_LENGTH) {
             return null;
@@ -172,12 +170,10 @@ public class ControlMessageReader {
         return new Position(x, y, screenWidth, screenHeight);
     }
 
-    @SuppressWarnings("checkstyle:MagicNumber")
     private static int toUnsigned(short value) {
         return value & 0xffff;
     }
 
-    @SuppressWarnings("checkstyle:MagicNumber")
     private static int toUnsigned(byte value) {
         return value & 0xff;
     }

server/src/main/java/com/genymobile/scrcpy/Controller.java

@@ -47,7 +47,6 @@ public class Controller {
         }
     }
 
-    @SuppressWarnings("checkstyle:MagicNumber")
     public void control() throws IOException {
         // on start, power on the device
         if (!device.isScreenOn()) {
@@ -76,19 +75,29 @@ public class Controller {
         ControlMessage msg = connection.receiveControlMessage();
         switch (msg.getType()) {
             case ControlMessage.TYPE_INJECT_KEYCODE:
-                injectKeycode(msg.getAction(), msg.getKeycode(), msg.getMetaState());
+                if (device.supportsInputEvents()) {
+                    injectKeycode(msg.getAction(), msg.getKeycode(), msg.getMetaState());
+                }
                 break;
             case ControlMessage.TYPE_INJECT_TEXT:
-                injectText(msg.getText());
+                if (device.supportsInputEvents()) {
+                    injectText(msg.getText());
+                }
                 break;
             case ControlMessage.TYPE_INJECT_TOUCH_EVENT:
-                injectTouch(msg.getAction(), msg.getPointerId(), msg.getPosition(), msg.getPressure(), msg.getButtons());
+                if (device.supportsInputEvents()) {
+                    injectTouch(msg.getAction(), msg.getPointerId(), msg.getPosition(), msg.getPressure(), msg.getButtons());
+                }
                 break;
             case ControlMessage.TYPE_INJECT_SCROLL_EVENT:
-                injectScroll(msg.getPosition(), msg.getHScroll(), msg.getVScroll());
+                if (device.supportsInputEvents()) {
+                    injectScroll(msg.getPosition(), msg.getHScroll(), msg.getVScroll());
+                }
                 break;
             case ControlMessage.TYPE_BACK_OR_SCREEN_ON:
-                pressBackOrTurnScreenOn();
+                if (device.supportsInputEvents()) {
+                    pressBackOrTurnScreenOn();
+                }
                 break;
             case ControlMessage.TYPE_EXPAND_NOTIFICATION_PANEL:
                 device.expandNotificationPanel();
@@ -104,7 +113,9 @@ public class Controller {
                 device.setClipboardText(msg.getText());
                 break;
             case ControlMessage.TYPE_SET_SCREEN_POWER_MODE:
-                device.setScreenPowerMode(msg.getAction());
+                if (device.supportsInputEvents()) {
+                    device.setScreenPowerMode(msg.getAction());
+                }
                 break;
             case ControlMessage.TYPE_ROTATE_DEVICE:
                 device.rotateDevice();

server/src/main/java/com/genymobile/scrcpy/DesktopConnection.java

@@ -84,7 +84,6 @@ public final class DesktopConnection implements Closeable {
         controlSocket.close();
     }
 
-    @SuppressWarnings("checkstyle:MagicNumber")
     private void send(String deviceName, int width, int height) throws IOException {
         byte[] buffer = new byte[DEVICE_NAME_FIELD_LENGTH + 4];
 

server/src/main/java/com/genymobile/scrcpy/Device.java

@@ -1,5 +1,6 @@
 package com.genymobile.scrcpy;
 
+import com.genymobile.scrcpy.wrappers.InputManager;
 import com.genymobile.scrcpy.wrappers.ServiceManager;
 import com.genymobile.scrcpy.wrappers.SurfaceControl;
 import com.genymobile.scrcpy.wrappers.WindowManager;
@@ -25,13 +26,40 @@ public final class Device {
     private ScreenInfo screenInfo;
     private RotationListener rotationListener;
 
+    /**
+     * Logical display identifier
+     */
+    private final int displayId;
+
+    /**
+     * The surface flinger layer stack associated with this logical display
+     */
+    private final int layerStack;
+
+    /**
+     * The FLAG_PRESENTATION from the DisplayInfo
+     */
+    private final boolean isPresentationDisplay;
+
     public Device(Options options) {
-        screenInfo = computeScreenInfo(options.getCrop(), options.getMaxSize());
+        displayId = options.getDisplayId();
+        DisplayInfo displayInfo = serviceManager.getDisplayManager().getDisplayInfo(displayId);
+        if (displayInfo == null) {
+            int[] displayIds = serviceManager.getDisplayManager().getDisplayIds();
+            throw new InvalidDisplayIdException(displayId, displayIds);
+        }
+
+        int displayInfoFlags = displayInfo.getFlags();
+
+        screenInfo = ScreenInfo.computeScreenInfo(displayInfo, options.getCrop(), options.getMaxSize(), options.getLockedVideoOrientation());
+        layerStack = displayInfo.getLayerStack();
+        isPresentationDisplay = (displayInfoFlags & DisplayInfo.FLAG_PRESENTATION) != 0;
+
         registerRotationWatcher(new IRotationWatcher.Stub() {
             @Override
             public void onRotationChanged(int rotation) throws RemoteException {
                 synchronized (Device.this) {
-                    screenInfo = screenInfo.withRotation(rotation);
+                    screenInfo = screenInfo.withDeviceRotation(rotation);
 
                     // notify
                     if (rotationListener != null) {
@@ -40,88 +68,69 @@ public final class Device {
                 }
             }
         });
+
+        if ((displayInfoFlags & DisplayInfo.FLAG_SUPPORTS_PROTECTED_BUFFERS) == 0) {
+            Ln.w("Display doesn't have FLAG_SUPPORTS_PROTECTED_BUFFERS flag, mirroring can be restricted");
+        }
+
+        if (!supportsInputEvents()) {
+            Ln.w("Input events are not supported for displays with FLAG_PRESENTATION enabled for devices with API lower than 29");
+        }
     }
 
     public synchronized ScreenInfo getScreenInfo() {
         return screenInfo;
     }
 
-    private ScreenInfo computeScreenInfo(Rect crop, int maxSize) {
-        DisplayInfo displayInfo = serviceManager.getDisplayManager().getDisplayInfo();
-        boolean rotated = (displayInfo.getRotation() & 1) != 0;
-        Size deviceSize = displayInfo.getSize();
-        Rect contentRect = new Rect(0, 0, deviceSize.getWidth(), deviceSize.getHeight());
-        if (crop != null) {
-            if (rotated) {
-                // the crop (provided by the user) is expressed in the natural orientation
-                crop = flipRect(crop);
-            }
-            if (!contentRect.intersect(crop)) {
-                // intersect() changes contentRect so that it is intersected with crop
-                Ln.w("Crop rectangle (" + formatCrop(crop) + ") does not intersect device screen (" + formatCrop(deviceSize.toRect()) + ")");
-                contentRect = new Rect(); // empty
-            }
-        }
-
-        Size videoSize = computeVideoSize(contentRect.width(), contentRect.height(), maxSize);
-        return new ScreenInfo(contentRect, videoSize, rotated);
-    }
-
-    private static String formatCrop(Rect rect) {
-        return rect.width() + ":" + rect.height() + ":" + rect.left + ":" + rect.top;
-    }
-
-    @SuppressWarnings("checkstyle:MagicNumber")
-    private static Size computeVideoSize(int w, int h, int maxSize) {
-        // Compute the video size and the padding of the content inside this video.
-        // Principle:
-        // - scale down the great side of the screen to maxSize (if necessary);
-        // - scale down the other side so that the aspect ratio is preserved;
-        // - round this value to the nearest multiple of 8 (H.264 only accepts multiples of 8)
-        w &= ~7; // in case it's not a multiple of 8
-        h &= ~7;
-        if (maxSize > 0) {
-            if (BuildConfig.DEBUG && maxSize % 8 != 0) {
-                throw new AssertionError("Max size must be a multiple of 8");
-            }
-            boolean portrait = h > w;
-            int major = portrait ? h : w;
-            int minor = portrait ? w : h;
-            if (major > maxSize) {
-                int minorExact = minor * maxSize / major;
-                // +4 to round the value to the nearest multiple of 8
-                minor = (minorExact + 4) & ~7;
-                major = maxSize;
-            }
-            w = portrait ? minor : major;
-            h = portrait ? major : minor;
-        }
-        return new Size(w, h);
+    public int getLayerStack() {
+        return layerStack;
     }
 
     public Point getPhysicalPoint(Position position) {
         // it hides the field on purpose, to read it with a lock
         @SuppressWarnings("checkstyle:HiddenField")
         ScreenInfo screenInfo = getScreenInfo(); // read with synchronization
-        Size videoSize = screenInfo.getVideoSize();
-        Size clientVideoSize = position.getScreenSize();
-        if (!videoSize.equals(clientVideoSize)) {
+
+        // ignore the locked video orientation, the events will apply in coordinates considered in the physical device orientation
+        Size unlockedVideoSize = screenInfo.getUnlockedVideoSize();
+
+        int reverseVideoRotation = screenInfo.getReverseVideoRotation();
+        // reverse the video rotation to apply the events
+        Position devicePosition = position.rotate(reverseVideoRotation);
+
+        Size clientVideoSize = devicePosition.getScreenSize();
+        if (!unlockedVideoSize.equals(clientVideoSize)) {
             // The client sends a click relative to a video with wrong dimensions,
             // the device may have been rotated since the event was generated, so ignore the event
             return null;
         }
         Rect contentRect = screenInfo.getContentRect();
-        Point point = position.getPoint();
-        int scaledX = contentRect.left + point.getX() * contentRect.width() / videoSize.getWidth();
-        int scaledY = contentRect.top + point.getY() * contentRect.height() / videoSize.getHeight();
-        return new Point(scaledX, scaledY);
+        Point point = devicePosition.getPoint();
+        int convertedX = contentRect.left + point.getX() * contentRect.width() / unlockedVideoSize.getWidth();
+        int convertedY = contentRect.top + point.getY() * contentRect.height() / unlockedVideoSize.getHeight();
+        return new Point(convertedX, convertedY);
     }
 
     public static String getDeviceName() {
         return Build.MODEL;
     }
 
+    public boolean supportsInputEvents() {
+        if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.Q) {
+            return true;
+        }
+        return !isPresentationDisplay;
+    }
+
     public boolean injectInputEvent(InputEvent inputEvent, int mode) {
+        if (!supportsInputEvents()) {
+            throw new AssertionError("Could not inject input event if !supportsInputEvents()");
+        }
+
+        if (displayId != 0 && !InputManager.setDisplayId(inputEvent, displayId)) {
+            return false;
+        }
+
         return serviceManager.getInputManager().injectInputEvent(inputEvent, mode);
     }
 
@@ -154,8 +163,10 @@ public final class Device {
     }
 
     public void setClipboardText(String text) {
-        serviceManager.getClipboardManager().setText(text);
-        Ln.i("Device clipboard set");
+        boolean ok = serviceManager.getClipboardManager().setText(text);
+        if (ok) {
+            Ln.i("Device clipboard set");
+        }
     }
 
     /**
@@ -167,8 +178,10 @@ public final class Device {
             Ln.e("Could not get built-in display");
             return;
         }
-        SurfaceControl.setDisplayPowerMode(d, mode);
-        Ln.i("Device screen turned " + (mode == Device.POWER_MODE_OFF ? "off" : "on"));
+        boolean ok = SurfaceControl.setDisplayPowerMode(d, mode);
+        if (ok) {
+            Ln.i("Device screen turned " + (mode == Device.POWER_MODE_OFF ? "off" : "on"));
+        }
     }
 
     /**
@@ -191,8 +204,4 @@ public final class Device {
             wm.thawRotation();
         }
     }
-
-    static Rect flipRect(Rect crop) {
-        return new Rect(crop.top, crop.left, crop.bottom, crop.right);
-    }
 }

server/src/main/java/com/genymobile/scrcpy/DeviceMessageWriter.java

@@ -13,7 +13,6 @@ public class DeviceMessageWriter {
     private final byte[] rawBuffer = new byte[MAX_EVENT_SIZE];
     private final ByteBuffer buffer = ByteBuffer.wrap(rawBuffer);
 
-    @SuppressWarnings("checkstyle:MagicNumber")
     public void writeTo(DeviceMessage msg, OutputStream output) throws IOException {
         buffer.clear();
         buffer.put((byte) DeviceMessage.TYPE_CLIPBOARD);

server/src/main/java/com/genymobile/scrcpy/DisplayInfo.java

@@ -1,12 +1,25 @@
 package com.genymobile.scrcpy;
 
 public final class DisplayInfo {
+    private final int displayId;
     private final Size size;
     private final int rotation;
+    private final int layerStack;
+    private final int flags;
 
-    public DisplayInfo(Size size, int rotation) {
+    public static final int FLAG_SUPPORTS_PROTECTED_BUFFERS = 0x00000001;
+    public static final int FLAG_PRESENTATION = 0x00000008;
+
+    public DisplayInfo(int displayId, Size size, int rotation, int layerStack, int flags) {
+        this.displayId = displayId;
         this.size = size;
         this.rotation = rotation;
+        this.layerStack = layerStack;
+        this.flags = flags;
+    }
+
+    public int getDisplayId() {
+        return displayId;
     }
 
     public Size getSize() {
@@ -16,5 +29,13 @@ public final class DisplayInfo {
     public int getRotation() {
         return rotation;
     }
+
+    public int getLayerStack() {
+        return layerStack;
+    }
+
+    public int getFlags() {
+        return flags;
+    }
 }
 

server/src/main/java/com/genymobile/scrcpy/InvalidDisplayIdException.java

@@ -0,0 +1,21 @@
+package com.genymobile.scrcpy;
+
+public class InvalidDisplayIdException extends RuntimeException {
+
+    private final int displayId;
+    private final int[] availableDisplayIds;
+
+    public InvalidDisplayIdException(int displayId, int[] availableDisplayIds) {
+        super("There is no display having id " + displayId);
+        this.displayId = displayId;
+        this.availableDisplayIds = availableDisplayIds;
+    }
+
+    public int getDisplayId() {
+        return displayId;
+    }
+
+    public int[] getAvailableDisplayIds() {
+        return availableDisplayIds;
+    }
+}

server/src/main/java/com/genymobile/scrcpy/Options.java

@@ -6,10 +6,12 @@ public class Options {
     private int maxSize;
     private int bitRate;
     private int maxFps;
+    private int lockedVideoOrientation;
     private boolean tunnelForward;
     private Rect crop;
     private boolean sendFrameMeta; // send PTS so that the client may record properly
     private boolean control;
+    private int displayId;
 
     public int getMaxSize() {
         return maxSize;
@@ -35,6 +37,14 @@ public class Options {
         this.maxFps = maxFps;
     }
 
+    public int getLockedVideoOrientation() {
+        return lockedVideoOrientation;
+    }
+
+    public void setLockedVideoOrientation(int lockedVideoOrientation) {
+        this.lockedVideoOrientation = lockedVideoOrientation;
+    }
+
     public boolean isTunnelForward() {
         return tunnelForward;
     }
@@ -66,4 +76,12 @@ public class Options {
     public void setControl(boolean control) {
         this.control = control;
     }
+
+    public int getDisplayId() {
+        return displayId;
+    }
+
+    public void setDisplayId(int displayId) {
+        this.displayId = displayId;
+    }
 }

server/src/main/java/com/genymobile/scrcpy/Position.java

@@ -23,6 +23,19 @@ public class Position {
         return screenSize;
     }
 
+    public Position rotate(int rotation) {
+        switch (rotation) {
+            case 1:
+                return new Position(new Point(screenSize.getHeight() - point.getY(), point.getX()), screenSize.rotate());
+            case 2:
+                return new Position(new Point(screenSize.getWidth() - point.getX(), screenSize.getHeight() - point.getY()), screenSize);
+            case 3:
+                return new Position(new Point(point.getY(), screenSize.getWidth() - point.getX()), screenSize.rotate());
+            default:
+                return this;
+        }
+    }
+
     @Override
     public boolean equals(Object o) {
         if (this == o) {

server/src/main/java/com/genymobile/scrcpy/ScreenEncoder.java

@@ -6,7 +6,6 @@ import android.graphics.Rect;
 import android.media.MediaCodec;
 import android.media.MediaCodecInfo;
 import android.media.MediaFormat;
-import android.os.Build;
 import android.os.IBinder;
 import android.view.Surface;
 
@@ -28,19 +27,21 @@ public class ScreenEncoder implements Device.RotationListener {
 
     private int bitRate;
     private int maxFps;
+    private int lockedVideoOrientation;
     private int iFrameInterval;
     private boolean sendFrameMeta;
     private long ptsOrigin;
 
-    public ScreenEncoder(boolean sendFrameMeta, int bitRate, int maxFps, int iFrameInterval) {
+    public ScreenEncoder(boolean sendFrameMeta, int bitRate, int maxFps, int lockedVideoOrientation, int iFrameInterval) {
         this.sendFrameMeta = sendFrameMeta;
         this.bitRate = bitRate;
         this.maxFps = maxFps;
+        this.lockedVideoOrientation = lockedVideoOrientation;
         this.iFrameInterval = iFrameInterval;
     }
 
-    public ScreenEncoder(boolean sendFrameMeta, int bitRate, int maxFps) {
-        this(sendFrameMeta, bitRate, maxFps, DEFAULT_I_FRAME_INTERVAL);
+    public ScreenEncoder(boolean sendFrameMeta, int bitRate, int maxFps, int lockedVideoOrientation) {
+        this(sendFrameMeta, bitRate, maxFps, lockedVideoOrientation, DEFAULT_I_FRAME_INTERVAL);
     }
 
     @Override
@@ -63,12 +64,19 @@ public class ScreenEncoder implements Device.RotationListener {
             do {
                 MediaCodec codec = createCodec();
                 IBinder display = createDisplay();
-                Rect contentRect = device.getScreenInfo().getContentRect();
-                Rect videoRect = device.getScreenInfo().getVideoSize().toRect();
+                ScreenInfo screenInfo = device.getScreenInfo();
+                Rect contentRect = screenInfo.getContentRect();
+                // include the locked video orientation
+                Rect videoRect = screenInfo.getVideoSize().toRect();
+                // does not include the locked video orientation
+                Rect unlockedVideoRect = screenInfo.getUnlockedVideoSize().toRect();
+                int videoRotation = screenInfo.getVideoRotation();
+                int layerStack = device.getLayerStack();
+
                 setSize(format, videoRect.width(), videoRect.height());
                 configure(codec, format);
                 Surface surface = codec.createInputSurface();
-                setDisplaySurface(display, surface, contentRect, videoRect);
+                setDisplaySurface(display, surface, videoRotation, contentRect, unlockedVideoRect, layerStack);
                 codec.start();
                 try {
                     alive = encode(codec, fd);
@@ -139,7 +147,6 @@ public class ScreenEncoder implements Device.RotationListener {
         return MediaCodec.createEncoderByType("video/avc");
     }
 
-    @SuppressWarnings("checkstyle:MagicNumber")
     private static MediaFormat createFormat(int bitRate, int maxFps, int iFrameInterval) {
         MediaFormat format = new MediaFormat();
         format.setString(MediaFormat.KEY_MIME, "video/avc");
@@ -172,12 +179,12 @@ public class ScreenEncoder implements Device.RotationListener {
         format.setInteger(MediaFormat.KEY_HEIGHT, height);
     }
 
-    private static void setDisplaySurface(IBinder display, Surface surface, Rect deviceRect, Rect displayRect) {
+    private static void setDisplaySurface(IBinder display, Surface surface, int orientation, Rect deviceRect, Rect displayRect, int layerStack) {
         SurfaceControl.openTransaction();
         try {
             SurfaceControl.setDisplaySurface(display, surface);
-            SurfaceControl.setDisplayProjection(display, 0, deviceRect, displayRect);
-            SurfaceControl.setDisplayLayerStack(display, 0);
+            SurfaceControl.setDisplayProjection(display, orientation, deviceRect, displayRect);
+            SurfaceControl.setDisplayLayerStack(display, layerStack);
         } finally {
             SurfaceControl.closeTransaction();
         }

server/src/main/java/com/genymobile/scrcpy/ScreenInfo.java

@@ -3,29 +3,161 @@ package com.genymobile.scrcpy;
 import android.graphics.Rect;
 
 public final class ScreenInfo {
+    /**
+     * Device (physical) size, possibly cropped
+     */
     private final Rect contentRect; // device size, possibly cropped
-    private final Size videoSize;
-    private final boolean rotated;
 
-    public ScreenInfo(Rect contentRect, Size videoSize, boolean rotated) {
+    /**
+     * Video size, possibly smaller than the device size, already taking the device rotation and crop into account.
+     * <p>
+     * However, it does not include the locked video orientation.
+     */
+    private final Size unlockedVideoSize;
+
+    /**
+     * Device rotation, related to the natural device orientation (0, 1, 2 or 3)
+     */
+    private final int deviceRotation;
+
+    /**
+     * The locked video orientation (-1: disabled, 0: normal, 1: 90° CCW, 2: 180°, 3: 90° CW)
+     */
+    private final int lockedVideoOrientation;
+
+    public ScreenInfo(Rect contentRect, Size unlockedVideoSize, int deviceRotation, int lockedVideoOrientation) {
         this.contentRect = contentRect;
-        this.videoSize = videoSize;
-        this.rotated = rotated;
+        this.unlockedVideoSize = unlockedVideoSize;
+        this.deviceRotation = deviceRotation;
+        this.lockedVideoOrientation = lockedVideoOrientation;
     }
 
     public Rect getContentRect() {
         return contentRect;
     }
 
-    public Size getVideoSize() {
-        return videoSize;
+    /**
+     * Return the video size as if locked video orientation was not set.
+     *
+     * @return the unlocked video size
+     */
+    public Size getUnlockedVideoSize() {
+        return unlockedVideoSize;
     }
 
-    public ScreenInfo withRotation(int rotation) {
-        boolean newRotated = (rotation & 1) != 0;
-        if (rotated == newRotated) {
+    /**
+     * Return the actual video size if locked video orientation is set.
+     *
+     * @return the actual video size
+     */
+    public Size getVideoSize() {
+        if (getVideoRotation() % 2 == 0) {
+            return unlockedVideoSize;
+        }
+
+        return unlockedVideoSize.rotate();
+    }
+
+    public int getDeviceRotation() {
+        return deviceRotation;
+    }
+
+    public ScreenInfo withDeviceRotation(int newDeviceRotation) {
+        if (newDeviceRotation == deviceRotation) {
             return this;
         }
-        return new ScreenInfo(Device.flipRect(contentRect), videoSize.rotate(), newRotated);
+        // true if changed between portrait and landscape
+        boolean orientationChanged = (deviceRotation + newDeviceRotation) % 2 != 0;
+        Rect newContentRect;
+        Size newUnlockedVideoSize;
+        if (orientationChanged) {
+            newContentRect = flipRect(contentRect);
+            newUnlockedVideoSize = unlockedVideoSize.rotate();
+        } else {
+            newContentRect = contentRect;
+            newUnlockedVideoSize = unlockedVideoSize;
+        }
+        return new ScreenInfo(newContentRect, newUnlockedVideoSize, newDeviceRotation, lockedVideoOrientation);
+    }
+
+    public static ScreenInfo computeScreenInfo(DisplayInfo displayInfo, Rect crop, int maxSize, int lockedVideoOrientation) {
+        int rotation = displayInfo.getRotation();
+        Size deviceSize = displayInfo.getSize();
+        Rect contentRect = new Rect(0, 0, deviceSize.getWidth(), deviceSize.getHeight());
+        if (crop != null) {
+            if (rotation % 2 != 0) { // 180s preserve dimensions
+                // the crop (provided by the user) is expressed in the natural orientation
+                crop = flipRect(crop);
+            }
+            if (!contentRect.intersect(crop)) {
+                // intersect() changes contentRect so that it is intersected with crop
+                Ln.w("Crop rectangle (" + formatCrop(crop) + ") does not intersect device screen (" + formatCrop(deviceSize.toRect()) + ")");
+                contentRect = new Rect(); // empty
+            }
+        }
+
+        Size videoSize = computeVideoSize(contentRect.width(), contentRect.height(), maxSize);
+        return new ScreenInfo(contentRect, videoSize, rotation, lockedVideoOrientation);
+    }
+
+    private static String formatCrop(Rect rect) {
+        return rect.width() + ":" + rect.height() + ":" + rect.left + ":" + rect.top;
+    }
+
+    private static Size computeVideoSize(int w, int h, int maxSize) {
+        // Compute the video size and the padding of the content inside this video.
+        // Principle:
+        // - scale down the great side of the screen to maxSize (if necessary);
+        // - scale down the other side so that the aspect ratio is preserved;
+        // - round this value to the nearest multiple of 8 (H.264 only accepts multiples of 8)
+        w &= ~7; // in case it's not a multiple of 8
+        h &= ~7;
+        if (maxSize > 0) {
+            if (BuildConfig.DEBUG && maxSize % 8 != 0) {
+                throw new AssertionError("Max size must be a multiple of 8");
+            }
+            boolean portrait = h > w;
+            int major = portrait ? h : w;
+            int minor = portrait ? w : h;
+            if (major > maxSize) {
+                int minorExact = minor * maxSize / major;
+                // +4 to round the value to the nearest multiple of 8
+                minor = (minorExact + 4) & ~7;
+                major = maxSize;
+            }
+            w = portrait ? minor : major;
+            h = portrait ? major : minor;
+        }
+        return new Size(w, h);
+    }
+
+    private static Rect flipRect(Rect crop) {
+        return new Rect(crop.top, crop.left, crop.bottom, crop.right);
+    }
+
+    /**
+     * Return the rotation to apply to the device rotation to get the requested locked video orientation
+     *
+     * @return the rotation offset
+     */
+    public int getVideoRotation() {
+        if (lockedVideoOrientation == -1) {
+            // no offset
+            return 0;
+        }
+        return (deviceRotation + 4 - lockedVideoOrientation) % 4;
+    }
+
+    /**
+     * Return the rotation to apply to the requested locked video orientation to get the device rotation
+     *
+     * @return the (reverse) rotation offset
+     */
+    public int getReverseVideoRotation() {
+        if (lockedVideoOrientation == -1) {
+            // no offset
+            return 0;
+        }
+        return (lockedVideoOrientation + 4 - deviceRotation) % 4;
     }
 }

server/src/main/java/com/genymobile/scrcpy/Server.java

@@ -16,10 +16,12 @@ public final class Server {
     }
 
     private static void scrcpy(Options options) throws IOException {
+        Ln.i("Device: " + Build.MANUFACTURER + " " + Build.MODEL + " (Android " + Build.VERSION.RELEASE + ")");
         final Device device = new Device(options);
         boolean tunnelForward = options.isTunnelForward();
         try (DesktopConnection connection = DesktopConnection.open(device, tunnelForward)) {
-            ScreenEncoder screenEncoder = new ScreenEncoder(options.getSendFrameMeta(), options.getBitRate(), options.getMaxFps());
+            ScreenEncoder screenEncoder = new ScreenEncoder(options.getSendFrameMeta(), options.getBitRate(), options.getMaxFps(),
+                    options.getLockedVideoOrientation());
 
             if (options.getControl()) {
                 Controller controller = new Controller(device, connection);
@@ -67,7 +69,6 @@ public final class Server {
         }).start();
     }
 
-    @SuppressWarnings("checkstyle:MagicNumber")
     private static Options createOptions(String... args) {
         if (args.length < 1) {
             throw new IllegalArgumentException("Missing client version");
@@ -76,11 +77,11 @@ public final class Server {
         String clientVersion = args[0];
         if (!clientVersion.equals(BuildConfig.VERSION_NAME)) {
             throw new IllegalArgumentException(
-                    "The server version (" + clientVersion + ") does not match the client " + "(" + BuildConfig.VERSION_NAME + ")");
+                    "The server version (" + BuildConfig.VERSION_NAME + ") does not match the client " + "(" + clientVersion + ")");
         }
 
-        if (args.length != 8) {
-            throw new IllegalArgumentException("Expecting 8 parameters");
+        if (args.length != 10) {
+            throw new IllegalArgumentException("Expecting 10 parameters");
         }
 
         Options options = new Options();
@@ -94,23 +95,28 @@ public final class Server {
         int maxFps = Integer.parseInt(args[3]);
         options.setMaxFps(maxFps);
 
+        int lockedVideoOrientation = Integer.parseInt(args[4]);
+        options.setLockedVideoOrientation(lockedVideoOrientation);
+
         // use "adb forward" instead of "adb tunnel"? (so the server must listen)
-        boolean tunnelForward = Boolean.parseBoolean(args[4]);
+        boolean tunnelForward = Boolean.parseBoolean(args[5]);
         options.setTunnelForward(tunnelForward);
 
-        Rect crop = parseCrop(args[5]);
+        Rect crop = parseCrop(args[6]);
         options.setCrop(crop);
 
-        boolean sendFrameMeta = Boolean.parseBoolean(args[6]);
+        boolean sendFrameMeta = Boolean.parseBoolean(args[7]);
         options.setSendFrameMeta(sendFrameMeta);
 
-        boolean control = Boolean.parseBoolean(args[7]);
+        boolean control = Boolean.parseBoolean(args[8]);
         options.setControl(control);
 
+        int displayId = Integer.parseInt(args[9]);
+        options.setDisplayId(displayId);
+
         return options;
     }
 
-    @SuppressWarnings("checkstyle:MagicNumber")
     private static Rect parseCrop(String crop) {
         if ("-".equals(crop)) {
             return null;
@@ -135,7 +141,6 @@ public final class Server {
         }
     }
 
-    @SuppressWarnings("checkstyle:MagicNumber")
     private static void suggestFix(Throwable e) {
         if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.M) {
             if (e instanceof MediaCodec.CodecException) {
@@ -147,6 +152,16 @@ public final class Server {
                 }
             }
         }
+        if (e instanceof InvalidDisplayIdException) {
+            InvalidDisplayIdException idie = (InvalidDisplayIdException) e;
+            int[] displayIds = idie.getAvailableDisplayIds();
+            if (displayIds != null && displayIds.length > 0) {
+                Ln.e("Try to use one of the available display ids:");
+                for (int id : displayIds) {
+                    Ln.e("    scrcpy --display " + id);
+                }
+            }
+        }
     }
 
     public static void main(String... args) throws Exception {

server/src/main/java/com/genymobile/scrcpy/StringUtils.java

@@ -5,7 +5,6 @@ public final class StringUtils {
         // not instantiable
     }
 
-    @SuppressWarnings("checkstyle:MagicNumber")
     public static int getUtf8TruncationIndex(byte[] utf8, int maxLength) {
         int len = utf8.length;
         if (len <= maxLength) {

server/src/main/java/com/genymobile/scrcpy/wrappers/ClipboardManager.java

@@ -74,13 +74,15 @@ public class ClipboardManager {
         }
     }
 
-    public void setText(CharSequence text) {
+    public boolean setText(CharSequence text) {
         try {
             Method method = getSetPrimaryClipMethod();
             ClipData clipData = ClipData.newPlainText(null, text);
             setPrimaryClip(method, manager, clipData);
+            return true;
         } catch (InvocationTargetException | IllegalAccessException | NoSuchMethodException e) {
             Ln.e("Could not invoke method", e);
+            return false;
         }
     }
 }

server/src/main/java/com/genymobile/scrcpy/wrappers/DisplayManager.java

@@ -12,15 +12,28 @@ public final class DisplayManager {
         this.manager = manager;
     }
 
-    public DisplayInfo getDisplayInfo() {
+    public DisplayInfo getDisplayInfo(int displayId) {
         try {
-            Object displayInfo = manager.getClass().getMethod("getDisplayInfo", int.class).invoke(manager, 0);
+            Object displayInfo = manager.getClass().getMethod("getDisplayInfo", int.class).invoke(manager, displayId);
+            if (displayInfo == null) {
+                return null;
+            }
             Class<?> cls = displayInfo.getClass();
             // width and height already take the rotation into account
             int width = cls.getDeclaredField("logicalWidth").getInt(displayInfo);
             int height = cls.getDeclaredField("logicalHeight").getInt(displayInfo);
             int rotation = cls.getDeclaredField("rotation").getInt(displayInfo);
-            return new DisplayInfo(new Size(width, height), rotation);
+            int layerStack = cls.getDeclaredField("layerStack").getInt(displayInfo);
+            int flags = cls.getDeclaredField("flags").getInt(displayInfo);
+            return new DisplayInfo(displayId, new Size(width, height), rotation, layerStack, flags);
+        } catch (Exception e) {
+            throw new AssertionError(e);
+        }
+    }
+
+    public int[] getDisplayIds() {
+        try {
+            return (int[]) manager.getClass().getMethod("getDisplayIds").invoke(manager);
         } catch (Exception e) {
             throw new AssertionError(e);
         }

server/src/main/java/com/genymobile/scrcpy/wrappers/InputManager.java

@@ -17,6 +17,8 @@ public final class InputManager {
     private final IInterface manager;
     private Method injectInputEventMethod;
 
+    private static Method setDisplayIdMethod;
+
     public InputManager(IInterface manager) {
         this.manager = manager;
     }
@@ -37,4 +39,23 @@ public final class InputManager {
             return false;
         }
     }
+
+    private static Method getSetDisplayIdMethod() throws NoSuchMethodException {
+        if (setDisplayIdMethod == null) {
+            setDisplayIdMethod = InputEvent.class.getMethod("setDisplayId", int.class);
+        }
+        return setDisplayIdMethod;
+    }
+
+    public static boolean setDisplayId(InputEvent inputEvent, int displayId) {
+        try {
+            Method method = getSetDisplayIdMethod();
+            method.invoke(inputEvent, displayId);
+            return true;
+        } catch (InvocationTargetException | IllegalAccessException | NoSuchMethodException e) {
+            // just a warning, it might happen on old devices
+            Ln.w("Cannot associate a display id to the input event");
+            return false;
+        }
+    }
 }

server/src/main/java/com/genymobile/scrcpy/wrappers/SurfaceControl.java

@@ -121,12 +121,14 @@ public final class SurfaceControl {
         return setDisplayPowerModeMethod;
     }
 
-    public static void setDisplayPowerMode(IBinder displayToken, int mode) {
+    public static boolean setDisplayPowerMode(IBinder displayToken, int mode) {
         try {
             Method method = getSetDisplayPowerModeMethod();
             method.invoke(null, displayToken, mode);
+            return true;
         } catch (InvocationTargetException | IllegalAccessException | NoSuchMethodException e) {
             Ln.e("Could not invoke method", e);
+            return false;
         }
     }
 

server/src/test/java/com/genymobile/scrcpy/ControlMessageReaderTest.java

@@ -28,6 +28,9 @@ public class ControlMessageReaderTest {
         dos.writeInt(KeyEvent.META_CTRL_ON);
         byte[] packet = bos.toByteArray();
 
+        // The message type (1 byte) does not count
+        Assert.assertEquals(ControlMessageReader.INJECT_KEYCODE_PAYLOAD_LENGTH, packet.length - 1);
+
         reader.readFrom(new ByteArrayInputStream(packet));
         ControlMessage event = reader.next();
 
@@ -77,7 +80,6 @@ public class ControlMessageReaderTest {
     }
 
     @Test
-    @SuppressWarnings("checkstyle:MagicNumber")
     public void testParseTouchEvent() throws IOException {
         ControlMessageReader reader = new ControlMessageReader();
 
@@ -95,6 +97,9 @@ public class ControlMessageReaderTest {
 
         byte[] packet = bos.toByteArray();
 
+        // The message type (1 byte) does not count
+        Assert.assertEquals(ControlMessageReader.INJECT_TOUCH_EVENT_PAYLOAD_LENGTH, packet.length - 1);
+
         reader.readFrom(new ByteArrayInputStream(packet));
         ControlMessage event = reader.next();
 
@@ -110,7 +115,6 @@ public class ControlMessageReaderTest {
     }
 
     @Test
-    @SuppressWarnings("checkstyle:MagicNumber")
     public void testParseScrollEvent() throws IOException {
         ControlMessageReader reader = new ControlMessageReader();
 
@@ -126,6 +130,9 @@ public class ControlMessageReaderTest {
 
         byte[] packet = bos.toByteArray();
 
+        // The message type (1 byte) does not count
+        Assert.assertEquals(ControlMessageReader.INJECT_SCROLL_EVENT_PAYLOAD_LENGTH, packet.length - 1);
+
         reader.readFrom(new ByteArrayInputStream(packet));
         ControlMessage event = reader.next();
 
@@ -233,6 +240,9 @@ public class ControlMessageReaderTest {
 
         byte[] packet = bos.toByteArray();
 
+        // The message type (1 byte) does not count
+        Assert.assertEquals(ControlMessageReader.SET_SCREEN_POWER_MODE_PAYLOAD_LENGTH, packet.length - 1);
+
         reader.readFrom(new ByteArrayInputStream(packet));
         ControlMessage event = reader.next();
 

server/src/test/java/com/genymobile/scrcpy/StringUtilsTest.java

@@ -8,7 +8,6 @@ import java.nio.charset.StandardCharsets;
 public class StringUtilsTest {
 
     @Test
-    @SuppressWarnings("checkstyle:MagicNumber")
     public void testUtf8Truncate() {
         String s = "aÉbÔc";
         byte[] utf8 = s.getBytes(StandardCharsets.UTF_8);