Functors in WebView were binding to different buffers than we
assumed in the toolkit, eventually causing a crash due to improper
dereferencing in the currently bound buffer. Fix is to reset state
after invoking functors.
Issue #6666279 Native crash in Currents, mostly on Nakasi
Change-Id: I3697812d83613fffc9193daa99beea4dbf26474a
The pixel store pack alignment was not set for the source texture,
causing a write to occur outside of the destination bitmap's
bounds.
Change-Id: Iaa5767acf7b5943fbc2765c3810a142f06b1a796
bug:7114630
Fixes different x, y scales, and fixes boundaryWidthProportion to be from
center, not edge.
Also adds drawLine tests that previously drew blurry.
Change-Id: I2b648a60361ad3931eac67647b9b27909525ee1e
Previously, to draw a layered view with a changed Paint object for the
drawLayer operation, you'd have to invalidate the parent view, to get the
native DisplayList to pick up the new Paint properties. This change adds
API and functionality so that the developer can call setLayerPaint(), which
does the proper invalidation (lightweight, doesn't cause redrawing the view).
Issue #6923810 Make it easy to efficiently animate a layer's Paint
Change-Id: I7fea79788d50f6d9c86dd5e5b2a4490cb95142bb
- we cannot use "rtl" / "ltr" qualifiers as they can conflict with ISO-639 Alpha-3
codespace which uses 3 letters for identifying a language code (and could use either
"rtl" or "ltr" strings for defining a language in the future).
- we are using instead "ldrtl" for RTL and "ldltr" for LTR resources. Those qualifiers
are defined by more than 3 chars and outside of what is defined into ISO-639. They
are also more understandable as "ld" prefix is for "layoutdirection"
Change-Id: Id43e948103707e09bef63ebd54ac1779dde58e72
Instead of calculating opacity from relative position in the shader, use a
shader varying to do this computation for us.
bug:5045101
Also adds a test to HwAccelerationTest to show incorrect antialiasing in
scaled drawAARect / boundarySize calculation.
Change-Id: Icdc41acb01dc10ce354834f8389a5aed2f439162
FontRenderer::flushLargeCaches identifies the large textures used to
cache glyphs and visits all the known fonts to mark their glyphs
invalid if they belong to one of these large textures.
Unfortunately, Font::invalidateTextureCache had a logic error
which would make it mark *all glyphs* as invalid, not matter
what texture they belong to. This means that any large cache
flush would cause all glyphs to be invalidate, thus forcing
the rendering system to recreate them on the next draw.
Font::invalidateTextureCache is supposed to behave this way:
- If the specified cacheTexture is NULL (default value), mark
all glyphs as invalid (see FontRenderer::flushAllAndInvalidate())
- If cacheTexture is *not* NULL, invalidate only the glyphs for
which glyph.cacheTexture == cacheTexture.
The previous condition read:
if (cacheTexture || glyph.cacheTexture == cacheTexture)
This test *always* passes.
Change-Id: I418886cb594c81c6178d0f9e9953d975e991cf22
boundaryWidth and boundaryLength are now distance from center, instead of
distance from edge, in order to avoid unnecessary calculation in the shader. New
calculation of these matches drawAARect.
Change-Id: I1c7f576a97a6f0ce00d521661fd56fb62e05e6f2
FontRenderer.h defined several classes and structures that now live
in the font/ folder. This will make the code easier to read and
maintain.
Change-Id: I3dc044e9bde1d6515f8704f5c72462877d279fe2
this introduced a dead lock in GradientCache's ctor.
This reverts commit dfe082f63e94cde9aee271c94d13de5e7217e036.
Bug: 7096001
Change-Id: I57b8bbab11fb7cb502fa58e3bbf5d19864db874f
Add new parameters for the texture size used for the larger, fallback caches.
Bump up the defaults in some situations.
Issue #7045164 Adjust cache sizes for manta
Change-Id: I562118ce785d7f8b6e445178878672e9709d25f2
It is unlikely, but possible, to draw so many glyphs in a frame
(especially of the glyphs are quite large) that the cache starts flushing
itself to fit the later glyphs in. This causes unnecessary thrashing, because
when we actually draw the frame, we will again need to flush to fit the
earlier glyphs in, and then flush again to fit the later ones in.
It is better to avoid thrashing the cache at the precache phase, and wait
until we actually draw the glyphs that do not fit to do any eviction of
the earlier glyphs.
This change simply notes when we are in the preaching phase, and avoids flushing
the cache when a glyph does not fit.
Issue #7081725 avoid thrashing cache during DisplayList recording
Change-Id: I230410ab5b478091b1032fa99dc1752acf868bbe
Rendering views with alpha causes the creation of Fbo layers. These layers
are created at the size of the view, clipped by the current clip rect.
However, if the view lies completely outside the current clip rect, the
Fbo layer is created at the full size of the view and copied into place
outside of its container, causing artifacts like notification items showing
up outside the notification panel.
Fix is to note when the intersect() operation fails and to set an empty bounds
on the layer.
Issue #7069881 Bottom notification sometimes shows below bottom of notification panel shade
Change-Id: Ib52f7c4e503bbe9204cb808755ab269195aa94c1
Glyphs were being stored in the glyph cache incorrectly.
The second row of glyphs in any column were being positioned exactly
one pixel too high, causing the preceding glyph in that column to be
cropped, resulting in the reported truncation in some glyphs.
Issue #7003215 Minor UI truncation while reading the mails
Change-Id: I47ce376f78a04d4e07e8b7ed1b3f0b58864c5498
CacheTextureLine was useful before we were packing the glyph
textures; it allowed simple packing of any particular texture according to
how many lines there were in a texture, and how tall those lines were.
Now that we are packing more efficiently (both horizontally and vertically
in any given texture line), it is more efficient to have
open space in every texture, removing the need for CacheTextureLine (which
now gets in the way since it limits how much can be stored in each line).
This change removes CacheTextureLine and just uses CacheTexture directly,
allowing caching of glyphs anywhere in the open space of each texture. As before,
the packing of these glyphs is determined by the CacheBlock structure, which
is a linked list of open spaces in each CacheTexture.
Change-Id: Id6f628170df0f676f8743ac7de76f2377fc6a012
Precaching at startup was not working. One-liner fix to init the caches
so that precaching would kick in earlier, saving time at startup by avoiding
the multiple-upload issue of caching at render time.
Issue #6893691 long app launch time on manta for some apps comparing to nakasi/stingray
Change-Id: Ie5c7f0536ec8ea371c7892e5e09c1db14795531c
Chrome is disabling the scissor, which doesn't play well with our
code that assumes that we know the state of the scissor. This fix
sets up our internal state based on the actual state of the scissor
in the resume() function (which is called after any calls out to the
Chrome or Browser GL functor). This fixes intermittent rendering
artifacts, including a gray address bar (where the gray background
gets painted without the clip that is being applied to the text foreground).
Issue #6886339 Address bar in Chrome turns gray after swiping the tabs / favicons drift outside of tab
Change-Id: I3d8a23f4438b41a367336507845baaea90cccc7e
There are two fixes here:
- precaching: instead of caching-then-drawing whenever there is a new
glyph, we cache at DisplayList record time. Then when we finally draw that
DisplayList, we just upload the affected texture(s) once, instead of once
per change. This is a huge savings in upload time, especially when there are
larger glyphs being used by the app.
- packing: Previously, glyphs would line up horizontally on each cache line, leaving
potentially tons of space vertically, especially when smaller glyphs got put into cache
lines intended for large glyphs (which can happen when an app uses lots of unique
glyphs, a common case with, for example, chinese/japanese/korean languages). The new
approach packs glyphs vertically as well as horizontally to use the space more efficiently
and provide space for more glyphs in these situations.
Change-Id: I84338aa25db208c7bf13f3f92b4d05ed40c33527
