Increase adb devices -l max output size

For simplicity, the parsing of `adb devices -l` output is performed in a
single pass on the whole output.

This output was limited to 4096 bytes. Since there are about 100 chars
per device line, this limited the number of connected devices to ~40.

Increase to 65536 bytes to avoid a limitation in practice.

PR #3035 <https://github.com/Genymobile/scrcpy/pull/3035>

BUILD.md

@@ -161,7 +161,8 @@ install the required packages:
 ```bash
 # runtime dependencies
 pacman -S mingw-w64-x86_64-SDL2 \
-          mingw-w64-x86_64-ffmpeg
+          mingw-w64-x86_64-ffmpeg \
+          mingw-w64-x86_64-libusb
 
 # client build dependencies
 pacman -S mingw-w64-x86_64-make \
@@ -175,7 +176,8 @@ For a 32 bits version, replace `x86_64` by `i686`:
 ```bash
 # runtime dependencies
 pacman -S mingw-w64-i686-SDL2 \
-          mingw-w64-i686-ffmpeg
+          mingw-w64-i686-ffmpeg \
+          mingw-w64-i686-libusb
 
 # client build dependencies
 pacman -S mingw-w64-i686-make \
@@ -199,7 +201,7 @@ Install the packages with [Homebrew]:
 
 ```bash
 # runtime dependencies
-brew install sdl2 ffmpeg
+brew install sdl2 ffmpeg libusb
 
 # client build dependencies
 brew install pkg-config meson
@@ -258,7 +260,7 @@ set ANDROID_SDK_ROOT=%LOCALAPPDATA%\Android\sdk
 Then, build:
 
 ```bash
-meson x --buildtype release --strip -Db_lto=true
+meson x --buildtype=release --strip -Db_lto=true
 ninja -Cx  # DO NOT RUN AS ROOT
 ```
 
@@ -279,7 +281,7 @@ Download the prebuilt server somewhere, and specify its path during the Meson
 configuration:
 
 ```bash
-meson x --buildtype release --strip -Db_lto=true \
+meson x --buildtype=release --strip -Db_lto=true \
     -Dprebuilt_server=/path/to/scrcpy-server
 ninja -Cx  # DO NOT RUN AS ROOT
 ```

README.md

@@ -215,6 +215,15 @@ scrcpy --max-fps 15
 
 This is officially supported since Android 10, but may work on earlier versions.
 
+The actual capture framerate may be printed to the console:
+
+```
+scrcpy --print-fps
+```
+
+It may also be enabled or disabled at any time with <kbd>MOD</kbd>+<kbd>i</kbd>.
+
+
 #### Crop
 
 The device screen may be cropped to mirror only part of the screen.
@@ -422,7 +431,7 @@ scrcpy -b2M -m800  # short version
 
 #### Multi-devices
 
-If several devices are listed in `adb devices`, you must specify the _serial_:
+If several devices are listed in `adb devices`, you can specify the _serial_:
 
 ```bash
 scrcpy --serial 0123456789abcdef
@@ -436,6 +445,19 @@ scrcpy --serial 192.168.0.1:5555
 scrcpy -s 192.168.0.1:5555  # short version
 ```
 
+If only one device is connected via either USB or TCP/IP, it is possible to
+select it automatically:
+
+```bash
+# Select the only device connected via USB
+scrcpy -d             # like adb -d
+scrcpy --select-usb   # long version
+
+# Select the only device connected via TCP/IP
+scrcpy -e             # like adb -e
+scrcpy --select-tcpip # long version
+```
+
 You can start several instances of _scrcpy_ for several devices.
 
 #### Autostart on device connection

app/meson.build

@@ -1,6 +1,7 @@
 src = [
     'src/main.c',
     'src/adb/adb.c',
+    'src/adb/adb_device.c',
     'src/adb/adb_parser.c',
     'src/adb/adb_tunnel.c',
     'src/cli.c',
@@ -25,6 +26,7 @@ src = [
     'src/scrcpy.c',
     'src/screen.c',
     'src/server.c',
+    'src/version.c',
     'src/video_buffer.c',
     'src/util/acksync.c',
     'src/util/file.c',
@@ -67,12 +69,12 @@ else
     endif
 endif
 
-v4l2_support = host_machine.system() == 'linux'
+v4l2_support = get_option('v4l2') and host_machine.system() == 'linux'
 if v4l2_support
     src += [ 'src/v4l2_sink.c' ]
 endif
 
-usb_support = host_machine.system() == 'linux'
+usb_support = get_option('usb')
 if usb_support
     src += [
         'src/usb/aoa_hid.c',
@@ -109,9 +111,9 @@ if not crossbuild_windows
 else
     # cross-compile mingw32 build (from Linux to Windows)
     prebuilt_sdl2 = meson.get_cross_property('prebuilt_sdl2')
-    sdl2_bin_dir = meson.current_source_dir() + '/../prebuilt-deps/data/' + prebuilt_sdl2 + '/bin'
-    sdl2_lib_dir = meson.current_source_dir() + '/../prebuilt-deps/data/' + prebuilt_sdl2 + '/lib'
-    sdl2_include_dir = '../prebuilt-deps/data/' + prebuilt_sdl2 + '/include'
+    sdl2_bin_dir = meson.current_source_dir() + '/prebuilt-deps/data/' + prebuilt_sdl2 + '/bin'
+    sdl2_lib_dir = meson.current_source_dir() + '/prebuilt-deps/data/' + prebuilt_sdl2 + '/lib'
+    sdl2_include_dir = 'prebuilt-deps/data/' + prebuilt_sdl2 + '/include'
 
     sdl2 = declare_dependency(
         dependencies: [
@@ -122,8 +124,8 @@ else
     )
 
     prebuilt_ffmpeg = meson.get_cross_property('prebuilt_ffmpeg')
-    ffmpeg_bin_dir = meson.current_source_dir() + '/../prebuilt-deps/data/' + prebuilt_ffmpeg + '/bin'
-    ffmpeg_include_dir = '../prebuilt-deps/data/' + prebuilt_ffmpeg + '/include'
+    ffmpeg_bin_dir = meson.current_source_dir() + '/prebuilt-deps/data/' + prebuilt_ffmpeg + '/bin'
+    ffmpeg_include_dir = 'prebuilt-deps/data/' + prebuilt_ffmpeg + '/include'
 
     # ffmpeg versions are different for win32 and win64 builds
     ffmpeg_avcodec = meson.get_cross_property('ffmpeg_avcodec')
@@ -139,9 +141,22 @@ else
         include_directories: include_directories(ffmpeg_include_dir)
     )
 
+    prebuilt_libusb = meson.get_cross_property('prebuilt_libusb')
+    prebuilt_libusb_root = meson.get_cross_property('prebuilt_libusb_root')
+    libusb_bin_dir = meson.current_source_dir() + '/prebuilt-deps/data/' + prebuilt_libusb + '/dll'
+    libusb_include_dir = 'prebuilt-deps/data/' + prebuilt_libusb_root + '/include'
+
+    libusb = declare_dependency(
+        dependencies: [
+            cc.find_library('libusb-1.0', dirs: libusb_bin_dir),
+        ],
+        include_directories: include_directories(libusb_include_dir)
+    )
+
     dependencies = [
         ffmpeg,
         sdl2,
+        libusb,
         cc.find_library('mingw32')
     ]
 
@@ -209,7 +224,7 @@ executable('scrcpy', src,
            c_args: [])
 
 install_man('scrcpy.1')
-install_data('../data/icon.png',
+install_data('data/icon.png',
              rename: 'scrcpy.png',
              install_dir: 'share/icons/hicolor/256x256/apps')
 
@@ -221,6 +236,7 @@ if get_option('buildtype') == 'debug'
     tests = [
         ['test_adb_parser', [
             'tests/test_adb_parser.c',
+            'src/adb/adb_device.c',
             'src/adb/adb_parser.c',
             'src/util/str.c',
             'src/util/strbuf.c',
@@ -266,6 +282,9 @@ if get_option('buildtype') == 'debug'
             'src/util/str.c',
             'src/util/strbuf.c',
         ]],
+        ['test_vector', [
+            'tests/test_vector.c',
+        ]],
     ]
 
     foreach t : tests

app/prebuilt-deps/prepare-libusb.sh

@@ -0,0 +1,28 @@
+#!/usr/bin/env bash
+set -e
+DIR=$(dirname ${BASH_SOURCE[0]})
+cd "$DIR"
+. common
+mkdir -p "$PREBUILT_DATA_DIR"
+cd "$PREBUILT_DATA_DIR"
+
+DEP_DIR=libusb-1.0.25
+
+FILENAME=libusb-1.0.25.7z
+SHA256SUM=3d1c98416f454026034b2b5d67f8a294053898cb70a8b489874e75b136c6674d
+
+if [[ -d "$DEP_DIR" ]]
+then
+    echo "$DEP_DIR" found
+    exit 0
+fi
+
+get_file "https://github.com/libusb/libusb/releases/download/v1.0.25/$FILENAME" "$FILENAME" "$SHA256SUM"
+
+mkdir "$DEP_DIR"
+cd "$DEP_DIR"
+
+7z x "../$FILENAME" \
+    MinGW32/dll/libusb-1.0.dll \
+    MinGW64/dll/libusb-1.0.dll \
+    include /

app/scrcpy-windows.rc

@@ -1,6 +1,6 @@
 #include <winuser.h>
 
-0 ICON "../data/icon.ico"
+0 ICON "data/icon.ico"
 1 RT_MANIFEST "scrcpy-windows.manifest"
 2 VERSIONINFO
 BEGIN

app/scrcpy.1

@@ -43,6 +43,12 @@ The values are expressed in the device natural orientation (typically, portrait
 .B \-\-max\-size
 value is computed on the cropped size.
 
+.TP
+.B \-d, \-\-select\-usb
+Use USB device (if there is exactly one, like adb -d).
+
+Also see \fB\-e\fR (\fB\-\-select\-tcpip\fR).
+
 .TP
 .BI "\-\-disable-screensaver"
 Disable screensaver while scrcpy is running.
@@ -62,6 +68,12 @@ Add a buffering delay (in milliseconds) before displaying. This increases latenc
 
 Default is 0 (no buffering).
 
+.TP
+.B \-e, \-\-select\-tcpip
+Use TCP/IP device (if there is exactly one, like adb -e).
+
+Also see \fB\-d\fR (\fB\-\-select\-usb\fR).
+
 .TP
 .BI "\-\-encoder " name
 Use a specific MediaCodec encoder (must be a H.264 encoder).
@@ -88,7 +100,7 @@ Simulate a physical keyboard by using HID over AOAv2.
 
 This provides a better experience for IME users, and allows to generate non-ASCII characters, contrary to the default injection method.
 
-It may only work over USB, and is currently only supported on Linux.
+It may only work over USB.
 
 The keyboard layout must be configured (once and for all) on the device, via Settings -> System -> Languages and input -> Physical keyboard. This settings page can be started directly:
 
@@ -130,10 +142,16 @@ In this mode, the computer mouse is captured to control the device directly (rel
 
 LAlt, LSuper or RSuper toggle the capture mode, to give control of the mouse back to the computer.
 
-It may only work over USB, and is currently only supported on Linux.
+It may only work over USB.
 
 Also see \fB\-\-hid\-keyboard\fR.
 
+.TP
+.B \-\-no\-cleanup
+By default, scrcpy removes the server binary from the device and restores the device state (show touches, stay awake and power mode) on exit.
+
+This option disables this cleanup.
+
 .TP
 .B \-\-no\-clipboard\-autosync
 By default, scrcpy automatically synchronizes the computer clipboard to the device clipboard before injecting Ctrl+v, and the device clipboard to the computer clipboard whenever it changes.
@@ -172,7 +190,7 @@ LAlt, LSuper or RSuper toggle the mouse capture mode, to give control of the mou
 
 If any of \fB\-\-hid\-keyboard\fR or \fB\-\-hid\-mouse\fR is set, only enable keyboard or mouse respectively, otherwise enable both.
 
-It may only work over USB, and is currently only supported on Linux.
+It may only work over USB.
 
 See \fB\-\-hid\-keyboard\fR and \fB\-\-hid\-mouse\fR.
 
@@ -193,6 +211,10 @@ Inject alpha characters and space as text events instead of key events.
 This avoids issues when combining multiple keys to enter special characters,
 but breaks the expected behavior of alpha keys in games (typically WASD).
 
+.TP
+.B "\-\-print\-fps
+Start FPS counter, to print framerate logs to the console. It can be started or stopped at any time with MOD+i.
+
 .TP
 .BI "\-\-push\-target " path
 Set the target directory for pushing files to the device by drag & drop. It is passed as\-is to "adb push".

app/src/adb/adb.c

@@ -5,6 +5,7 @@
 #include <stdlib.h>
 #include <string.h>
 
+#include "adb_device.h"
 #include "adb_parser.h"
 #include "util/file.h"
 #include "util/log.h"
@@ -150,7 +151,7 @@ process_check_success_internal(sc_pid pid, const char *name, bool close,
 static bool
 process_check_success_intr(struct sc_intr *intr, sc_pid pid, const char *name,
                            unsigned flags) {
-    if (!sc_intr_set_process(intr, pid)) {
+    if (intr && !sc_intr_set_process(intr, pid)) {
         // Already interrupted
         return false;
     }
@@ -158,7 +159,9 @@ process_check_success_intr(struct sc_intr *intr, sc_pid pid, const char *name,
     // Always pass close=false, interrupting would be racy otherwise
     bool ret = process_check_success_internal(pid, name, false, flags);
 
-    sc_intr_set_process(intr, SC_PROCESS_NONE);
+    if (intr) {
+        sc_intr_set_process(intr, SC_PROCESS_NONE);
+    }
 
     // Close separately
     sc_process_close(pid);
@@ -194,6 +197,22 @@ sc_adb_execute(const char *const argv[], unsigned flags) {
     return sc_adb_execute_p(argv, flags, NULL);
 }
 
+bool
+sc_adb_start_server(struct sc_intr *intr, unsigned flags) {
+    const char *const argv[] = SC_ADB_COMMAND("start-server");
+
+    sc_pid pid = sc_adb_execute(argv, flags);
+    return process_check_success_intr(intr, pid, "adb start-server", flags);
+}
+
+bool
+sc_adb_kill_server(struct sc_intr *intr, unsigned flags) {
+    const char *const argv[] = SC_ADB_COMMAND("kill-server");
+
+    sc_pid pid = sc_adb_execute(argv, flags);
+    return process_check_success_intr(intr, pid, "adb kill-server", flags);
+}
+
 bool
 sc_adb_forward(struct sc_intr *intr, const char *serial, uint16_t local_port,
                const char *device_socket_name, unsigned flags) {
@@ -374,6 +393,242 @@ sc_adb_disconnect(struct sc_intr *intr, const char *ip_port, unsigned flags) {
     return process_check_success_intr(intr, pid, "adb disconnect", flags);
 }
 
+static bool
+sc_adb_list_devices(struct sc_intr *intr, unsigned flags,
+                    struct sc_vec_adb_devices *out_vec) {
+    const char *const argv[] = SC_ADB_COMMAND("devices", "-l");
+
+#define BUFSIZE 65536
+    char *buf = malloc(BUFSIZE);
+    if (!buf) {
+        return false;
+    }
+
+    sc_pipe pout;
+    sc_pid pid = sc_adb_execute_p(argv, flags, &pout);
+    if (pid == SC_PROCESS_NONE) {
+        LOGE("Could not execute \"adb devices -l\"");
+        free(buf);
+        return false;
+    }
+
+    ssize_t r = sc_pipe_read_all_intr(intr, pid, pout, buf, BUFSIZE - 1);
+    sc_pipe_close(pout);
+
+    bool ok = process_check_success_intr(intr, pid, "adb devices -l", flags);
+    if (!ok) {
+        free(buf);
+        return false;
+    }
+
+    if (r == -1) {
+        free(buf);
+        return false;
+    }
+
+    assert((size_t) r < BUFSIZE);
+    if (r == BUFSIZE - 1)  {
+        // The implementation assumes that the output of "adb devices -l" fits
+        // in the buffer in a single pass
+        LOGW("Result of \"adb devices -l\" does not fit in 64Kb. "
+             "Please report an issue.");
+        return false;
+    }
+
+    // It is parsed as a NUL-terminated string
+    buf[r] = '\0';
+
+    // List all devices to the output list directly
+    ok = sc_adb_parse_devices(buf, out_vec);
+    free(buf);
+    return ok;
+}
+
+static bool
+sc_adb_accept_device(const struct sc_adb_device *device,
+                     const struct sc_adb_device_selector *selector) {
+    switch (selector->type) {
+        case SC_ADB_DEVICE_SELECT_ALL:
+            return true;
+        case SC_ADB_DEVICE_SELECT_SERIAL:
+            assert(selector->serial);
+            char *device_serial_colon = strchr(device->serial, ':');
+            if (device_serial_colon) {
+                // The device serial is an IP:port...
+                char *serial_colon = strchr(selector->serial, ':');
+                if (!serial_colon) {
+                    // But the requested serial has no ':', so only consider
+                    // the IP part of the device serial. This allows to use
+                    // "192.168.1.1" to match any "192.168.1.1:port".
+                    size_t serial_len = strlen(selector->serial);
+                    size_t device_ip_len = device_serial_colon - device->serial;
+                    if (serial_len != device_ip_len) {
+                        // They are not equal, they don't even have the same
+                        // length
+                        return false;
+                    }
+                    return !strncmp(selector->serial, device->serial,
+                                    device_ip_len);
+                }
+            }
+            return !strcmp(selector->serial, device->serial);
+        case SC_ADB_DEVICE_SELECT_USB:
+            return !sc_adb_is_serial_tcpip(device->serial);
+        case SC_ADB_DEVICE_SELECT_TCPIP:
+            return sc_adb_is_serial_tcpip(device->serial);
+        default:
+            assert(!"Missing SC_ADB_DEVICE_SELECT_* handling");
+            break;
+    }
+
+    return false;
+}
+
+static size_t
+sc_adb_devices_select(struct sc_adb_device *devices, size_t len,
+                      const struct sc_adb_device_selector *selector,
+                      size_t *idx_out) {
+    size_t count = 0;
+    for (size_t i = 0; i < len; ++i) {
+        struct sc_adb_device *device = &devices[i];
+        device->selected = sc_adb_accept_device(device, selector);
+        if (device->selected) {
+            if (idx_out && !count) {
+                *idx_out = i;
+            }
+            ++count;
+        }
+    }
+
+    return count;
+}
+
+static void
+sc_adb_devices_log(enum sc_log_level level, struct sc_adb_device *devices,
+                   size_t count) {
+    for (size_t i = 0; i < count; ++i) {
+        struct sc_adb_device *d = &devices[i];
+        const char *selection = d->selected ? "-->" : "   ";
+        const char *type = sc_adb_is_serial_tcpip(d->serial) ? "(tcpip)"
+                                                             : "  (usb)";
+        LOG(level, "    %s %s  %-20s  %16s  %s",
+             selection, type, d->serial, d->state, d->model ? d->model : "");
+    }
+}
+
+static bool
+sc_adb_device_check_state(struct sc_adb_device *device,
+                          struct sc_adb_device *devices, size_t count) {
+    const char *state = device->state;
+
+    if (!strcmp("device", state)) {
+        return true;
+    }
+
+    if (!strcmp("unauthorized", state)) {
+        LOGE("Device is unauthorized:");
+        sc_adb_devices_log(SC_LOG_LEVEL_ERROR, devices, count);
+        LOGE("A popup should open on the device to request authorization.");
+        LOGE("Check the FAQ: "
+             "<https://github.com/Genymobile/scrcpy/blob/master/FAQ.md>");
+    }
+
+    return false;
+}
+
+bool
+sc_adb_select_device(struct sc_intr *intr,
+                     const struct sc_adb_device_selector *selector,
+                     unsigned flags, struct sc_adb_device *out_device) {
+    struct sc_vec_adb_devices vec = SC_VECTOR_INITIALIZER;
+    bool ok = sc_adb_list_devices(intr, flags, &vec);
+    if (!ok) {
+        LOGE("Could not list ADB devices");
+        return false;
+    }
+
+    if (vec.size == 0) {
+        LOGE("Could not find any ADB device");
+        return false;
+    }
+
+    size_t sel_idx; // index of the single matching device if sel_count == 1
+    size_t sel_count =
+        sc_adb_devices_select(vec.data, vec.size, selector, &sel_idx);
+
+    if (sel_count == 0) {
+        // if count > 0 && sel_count == 0, then necessarily a selection is
+        // requested
+        assert(selector->type != SC_ADB_DEVICE_SELECT_ALL);
+
+        switch (selector->type) {
+            case SC_ADB_DEVICE_SELECT_SERIAL:
+                assert(selector->serial);
+                LOGE("Could not find ADB device %s:", selector->serial);
+                break;
+            case SC_ADB_DEVICE_SELECT_USB:
+                LOGE("Could not find any ADB device over USB:");
+                break;
+            case SC_ADB_DEVICE_SELECT_TCPIP:
+                LOGE("Could not find any ADB device over TCP/IP:");
+                break;
+            default:
+                assert(!"Unexpected selector type");
+                break;
+        }
+
+        sc_adb_devices_log(SC_LOG_LEVEL_ERROR, vec.data, vec.size);
+        sc_adb_devices_destroy(&vec);
+        return false;
+    }
+
+    if (sel_count > 1) {
+        switch (selector->type) {
+            case SC_ADB_DEVICE_SELECT_ALL:
+                LOGE("Multiple (%" SC_PRIsizet ") ADB devices:", sel_count);
+                break;
+            case SC_ADB_DEVICE_SELECT_SERIAL:
+                assert(selector->serial);
+                LOGE("Multiple (%" SC_PRIsizet ") ADB devices with serial %s:",
+                     sel_count, selector->serial);
+                break;
+            case SC_ADB_DEVICE_SELECT_USB:
+                LOGE("Multiple (%" SC_PRIsizet ") ADB devices over USB:",
+                     sel_count);
+                break;
+            case SC_ADB_DEVICE_SELECT_TCPIP:
+                LOGE("Multiple (%" SC_PRIsizet ") ADB devices over TCP/IP:",
+                     sel_count);
+                break;
+            default:
+                assert(!"Unexpected selector type");
+                break;
+        }
+        sc_adb_devices_log(SC_LOG_LEVEL_ERROR, vec.data, vec.size);
+        LOGE("Select a device via -s (--serial), -d (--select-usb) or -e "
+             "(--select-tcpip)");
+        sc_adb_devices_destroy(&vec);
+        return false;
+    }
+
+    assert(sel_count == 1); // sel_idx is valid only if sel_count == 1
+    struct sc_adb_device *device = &vec.data[sel_idx];
+
+    ok = sc_adb_device_check_state(device, vec.data, vec.size);
+    if (!ok) {
+        sc_adb_devices_destroy(&vec);
+        return false;
+    }
+
+    LOGD("ADB device found:");
+    sc_adb_devices_log(SC_LOG_LEVEL_DEBUG, vec.data, vec.size);
+
+    // Move devics into out_device (do not destroy device)
+    sc_adb_device_move(out_device, device);
+    sc_adb_devices_destroy(&vec);
+    return true;
+}
+
 char *
 sc_adb_getprop(struct sc_intr *intr, const char *serial, const char *prop,
                unsigned flags) {
@@ -409,38 +664,6 @@ sc_adb_getprop(struct sc_intr *intr, const char *serial, const char *prop,
     return strdup(buf);
 }
 
-char *
-sc_adb_get_serialno(struct sc_intr *intr, unsigned flags) {
-    const char *const argv[] = SC_ADB_COMMAND("get-serialno");
-
-    sc_pipe pout;
-    sc_pid pid = sc_adb_execute_p(argv, flags, &pout);
-    if (pid == SC_PROCESS_NONE) {
-        LOGE("Could not execute \"adb get-serialno\"");
-        return NULL;
-    }
-
-    char buf[128];
-    ssize_t r = sc_pipe_read_all_intr(intr, pid, pout, buf, sizeof(buf) - 1);
-    sc_pipe_close(pout);
-
-    bool ok = process_check_success_intr(intr, pid, "adb get-serialno", flags);
-    if (!ok) {
-        return NULL;
-    }
-
-    if (r == -1) {
-        return NULL;
-    }
-
-    assert((size_t) r < sizeof(buf));
-    buf[r] = '\0';
-    size_t len = strcspn(buf, " \r\n");
-    buf[len] = '\0';
-
-    return strdup(buf);
-}
-
 char *
 sc_adb_get_device_ip(struct sc_intr *intr, const char *serial, unsigned flags) {
     assert(serial);
@@ -473,7 +696,7 @@ sc_adb_get_device_ip(struct sc_intr *intr, const char *serial, unsigned flags) {
         // The implementation assumes that the output of "ip route" fits in the
         // buffer in a single pass
         LOGW("Result of \"ip route\" does not fit in 1Kb. "
-             "Please report an issue.\n");
+             "Please report an issue.");
         return NULL;
     }
 
@@ -482,3 +705,8 @@ sc_adb_get_device_ip(struct sc_intr *intr, const char *serial, unsigned flags) {
 
     return sc_adb_parse_device_ip_from_output(buf);
 }
+
+bool
+sc_adb_is_serial_tcpip(const char *serial) {
+    return strchr(serial, ':');
+}

app/src/adb/adb.h

@@ -6,6 +6,7 @@
 #include <stdbool.h>
 #include <inttypes.h>
 
+#include "adb_device.h"
 #include "util/intr.h"
 
 #define SC_ADB_NO_STDOUT (1 << 0)
@@ -17,9 +18,27 @@
 const char *
 sc_adb_get_executable(void);
 
+enum sc_adb_device_selector_type {
+    SC_ADB_DEVICE_SELECT_ALL,
+    SC_ADB_DEVICE_SELECT_SERIAL,
+    SC_ADB_DEVICE_SELECT_USB,
+    SC_ADB_DEVICE_SELECT_TCPIP,
+};
+
+struct sc_adb_device_selector {
+    enum sc_adb_device_selector_type type;
+    const char *serial;
+};
+
 sc_pid
 sc_adb_execute(const char *const argv[], unsigned flags);
 
+bool
+sc_adb_start_server(struct sc_intr *intr, unsigned flags);
+
+bool
+sc_adb_kill_server(struct sc_intr *intr, unsigned flags);
+
 bool
 sc_adb_forward(struct sc_intr *intr, const char *serial, uint16_t local_port,
                const char *device_socket_name, unsigned flags);
@@ -69,6 +88,16 @@ sc_adb_connect(struct sc_intr *intr, const char *ip_port, unsigned flags);
 bool
 sc_adb_disconnect(struct sc_intr *intr, const char *ip_port, unsigned flags);
 
+/**
+ * Execute `adb devices` and parse the result to select a device
+ *
+ * Return true if a single matching device is found, and write it to out_device.
+ */
+bool
+sc_adb_select_device(struct sc_intr *intr,
+                     const struct sc_adb_device_selector *selector,
+                     unsigned flags, struct sc_adb_device *out_device);
+
 /**
  * Execute `adb getprop <prop>`
  */
@@ -76,14 +105,6 @@ char *
 sc_adb_getprop(struct sc_intr *intr, const char *serial, const char *prop,
                unsigned flags);
 
-/**
- * Execute `adb get-serialno`
- *
- * Return the result, to be freed by the caller, or NULL on error.
- */
-char *
-sc_adb_get_serialno(struct sc_intr *intr, unsigned flags);
-
 /**
  * Attempt to retrieve the device IP
  *
@@ -93,4 +114,13 @@ sc_adb_get_serialno(struct sc_intr *intr, unsigned flags);
 char *
 sc_adb_get_device_ip(struct sc_intr *intr, const char *serial, unsigned flags);
 
+/**
+ * Indicate if the serial represents an IP address
+ *
+ * In practice, it just returns true if and only if it contains a ':', which is
+ * sufficient to distinguish an ip:port from a real USB serial.
+ */
+bool
+sc_adb_is_serial_tcpip(const char *serial);
+
 #endif

app/src/adb/adb_device.c

@@ -0,0 +1,27 @@
+#include "adb_device.h"
+
+#include <stdlib.h>
+
+void
+sc_adb_device_destroy(struct sc_adb_device *device) {
+    free(device->serial);
+    free(device->state);
+    free(device->model);
+}
+
+void
+sc_adb_device_move(struct sc_adb_device *dst, struct sc_adb_device *src) {
+    *dst = *src;
+    src->serial = NULL;
+    src->state = NULL;
+    src->model = NULL;
+}
+
+void
+sc_adb_devices_destroy(struct sc_vec_adb_devices *devices) {
+    for (size_t i = 0; i < devices->size; ++i) {
+        sc_adb_device_destroy(&devices->data[i]);
+    }
+    sc_vector_destroy(devices);
+}
+

app/src/adb/adb_device.h

@@ -0,0 +1,38 @@
+#ifndef SC_ADB_DEVICE_H
+#define SC_ADB_DEVICE_H
+
+#include "common.h"
+
+#include <stdbool.h>
+#include <stddef.h>
+
+#include "util/vector.h"
+
+struct sc_adb_device {
+    char *serial;
+    char *state;
+    char *model;
+    bool selected;
+};
+
+struct sc_vec_adb_devices SC_VECTOR(struct sc_adb_device);
+
+void
+sc_adb_device_destroy(struct sc_adb_device *device);
+
+/**
+ * Move src to dst
+ *
+ * After this call, the content of src is undefined, except that
+ * sc_adb_device_destroy() can be called.
+ *
+ * This is useful to take a device from a list that will be destroyed, without
+ * making unnecessary copies.
+ */
+void
+sc_adb_device_move(struct sc_adb_device *dst, struct sc_adb_device *src);
+
+void
+sc_adb_devices_destroy(struct sc_vec_adb_devices *devices);
+
+#endif

app/src/adb/adb_parser.c

@@ -1,11 +1,166 @@
 #include "adb_parser.h"
 
 #include <assert.h>
+#include <stdlib.h>
 #include <string.h>
 
 #include "util/log.h"
 #include "util/str.h"
 
+bool
+sc_adb_parse_device(char *line, struct sc_adb_device *device) {
+    // One device line looks like:
+    // "0123456789abcdef	device usb:2-1 product:MyProduct model:MyModel "
+    //     "device:MyDevice transport_id:1"
+
+    if (line[0] == '*') {
+        // Garbage lines printed by adb daemon while starting start with a '*'
+        return false;
+    }
+
+    if (!strncmp("adb server", line, sizeof("adb server") - 1)) {
+        // Ignore lines starting with "adb server":
+        //   adb server version (41) doesn't match this client (39); killing...
+        return false;
+    }
+
+    char *s = line; // cursor in the line
+
+    // After the serial:
+    //  - "adb devices" writes a single '\t'
+    //  - "adb devices -l" writes multiple spaces
+    // For flexibility, accept both.
+    size_t serial_len = strcspn(s, " \t");
+    if (!serial_len) {
+        // empty serial
+        return false;
+    }
+    bool eol = s[serial_len] == '\0';
+    if (eol) {
+        // serial alone is unexpected
+        return false;
+    }
+    s[serial_len] = '\0';
+    char *serial = s;
+    s += serial_len + 1;
+    // After the serial, there might be several spaces
+    s += strspn(s, " \t"); // consume all separators
+
+    size_t state_len = strcspn(s, " ");
+    if (!state_len) {
+        // empty state
+        return false;
+    }
+    eol = s[state_len] == '\0';
+    s[state_len] = '\0';
+    char *state = s;
+
+    char *model = NULL;
+    if (!eol) {
+        s += state_len + 1;
+
+        // Iterate over all properties "key:value key:value ..."
+        for (;;) {
+            size_t token_len = strcspn(s, " ");
+            if (!token_len) {
+                break;
+            }
+            eol = s[token_len] == '\0';
+            s[token_len] = '\0';
+            char *token = s;
+
+            if (!strncmp("model:", token, sizeof("model:") - 1)) {
+                model = &token[sizeof("model:") - 1];
+                // We only need the model
+                break;
+            }
+
+            if (eol) {
+                break;
+            } else {
+                s+= token_len + 1;
+            }
+        }
+    }
+
+    device->serial = strdup(serial);
+    if (!device->serial) {
+        return false;
+    }
+
+    device->state = strdup(state);
+    if (!device->state) {
+        free(device->serial);
+        return false;
+    }
+
+    if (model) {
+        device->model = strdup(model);
+        if (!device->model) {
+            LOG_OOM();
+            // model is optional, do not fail
+        }
+    } else {
+        device->model = NULL;
+    }
+
+    device->selected = false;
+
+    return true;
+}
+
+bool
+sc_adb_parse_devices(char *str, struct sc_vec_adb_devices *out_vec) {
+#define HEADER "List of devices attached"
+#define HEADER_LEN (sizeof(HEADER) - 1)
+    bool header_found = false;
+
+    size_t idx_line = 0;
+    while (str[idx_line] != '\0') {
+        char *line = &str[idx_line];
+        size_t len = strcspn(line, "\n");
+
+        // The next line starts after the '\n' (replaced by `\0`)
+        idx_line += len;
+
+        if (str[idx_line] != '\0') {
+            // The next line starts after the '\n'
+            ++idx_line;
+        }
+
+        if (!header_found) {
+            if (!strncmp(line, HEADER, HEADER_LEN)) {
+                header_found = true;
+            }
+            // Skip everything until the header, there might be garbage lines
+            // related to daemon starting before
+            continue;
+        }
+
+        // The line, but without any trailing '\r'
+        size_t line_len = sc_str_remove_trailing_cr(line, len);
+        line[line_len] = '\0';
+
+        struct sc_adb_device device;
+        bool ok = sc_adb_parse_device(line, &device);
+        if (!ok) {
+            continue;
+        }
+
+        ok = sc_vector_push(out_vec, device);
+        if (!ok) {
+            LOG_OOM();
+            LOGE("Could not push adb_device to vector");
+            sc_adb_device_destroy(&device);
+            // continue anyway
+            continue;
+        }
+    }
+
+    assert(header_found || out_vec->size == 0);
+    return header_found;
+}
+
 static char *
 sc_adb_parse_device_ip_from_line(char *line) {
     // One line from "ip route" looks like:
@@ -64,7 +219,7 @@ sc_adb_parse_device_ip_from_output(char *str) {
 
         if (str[idx_line] != '\0') {
             // The next line starts after the '\n'
-            idx_line += 1;
+            ++idx_line;
         }
     }
 

app/src/adb/adb_parser.h

@@ -5,6 +5,18 @@
 
 #include <stddef.h>
 
+#include "adb_device.h"
+
+/**
+ * Parse the available devices from the output of `adb devices`
+ *
+ * The parameter must be a NUL-terminated string.
+ *
+ * Warning: this function modifies the buffer for optimization purposes.
+ */
+bool
+sc_adb_parse_devices(char *str, struct sc_vec_adb_devices *out_vec);
+
 /**
  * Parse the ip from the output of `adb shell ip route`
  *

app/src/cli.c

@@ -54,6 +54,8 @@
 #define OPT_RAW_KEY_EVENTS         1034
 #define OPT_NO_DOWNSIZE_ON_ERROR   1035
 #define OPT_OTG                    1036
+#define OPT_NO_CLEANUP             1037
+#define OPT_PRINT_FPS              1038
 
 struct sc_option {
     char shortopt;
@@ -116,7 +118,13 @@ static const struct sc_option options[] = {
         .text = "Crop the device screen on the server.\n"
                 "The values are expressed in the device natural orientation "
                 "(typically, portrait for a phone, landscape for a tablet). "
-                "Any --max-size value is cmoputed on the cropped size.",
+                "Any --max-size value is computed on the cropped size.",
+    },
+    {
+        .shortopt = 'd',
+        .longopt = "select-usb",
+        .text = "Use USB device (if there is exactly one, like adb -d).\n"
+                "Also see -e (--select-tcpip).",
     },
     {
         .longopt_id = OPT_DISABLE_SCREENSAVER,
@@ -141,6 +149,12 @@ static const struct sc_option options[] = {
                 "This increases latency to compensate for jitter.\n"
                 "Default is 0 (no buffering).",
     },
+    {
+        .shortopt = 'e',
+        .longopt = "select-tcpip",
+        .text = "Use TCP/IP device (if there is exactly one, like adb -e).\n"
+                "Also see -d (--select-usb).",
+    },
     {
         .longopt_id = OPT_ENCODER_NAME,
         .longopt = "encoder",
@@ -172,8 +186,7 @@ static const struct sc_option options[] = {
                 "It provides a better experience for IME users, and allows to "
                 "generate non-ASCII characters, contrary to the default "
                 "injection method.\n"
-                "It may only work over USB, and is currently only supported "
-                "on Linux.\n"
+                "It may only work over USB.\n"
                 "The keyboard layout must be configured (once and for all) on "
                 "the device, via Settings -> System -> Languages and input -> "
                 "Physical keyboard. This settings page can be started "
@@ -225,8 +238,7 @@ static const struct sc_option options[] = {
                 "device directly (relative mouse mode).\n"
                 "LAlt, LSuper or RSuper toggle the capture mode, to give "
                 "control of the mouse back to the computer.\n"
-                "It may only work over USB, and is currently only supported "
-                "on Linux.\n"
+                "It may only work over USB.\n"
                 "Also see --hid-keyboard.",
     },
     {
@@ -239,11 +251,12 @@ static const struct sc_option options[] = {
                 "Default is 0 (unlimited).",
     },
     {
-        .longopt_id = OPT_NO_DOWNSIZE_ON_ERROR,
-        .longopt = "no-downsize-on-error",
-        .text = "By default, on MediaCodec error, scrcpy automatically tries "
-                "again with a lower definition.\n"
-                "This option disables this behavior.",
+        .longopt_id = OPT_NO_CLEANUP,
+        .longopt = "no-cleanup",
+        .text = "By default, scrcpy removes the server binary from the device "
+                "and restores the device state (show touches, stay awake and "
+                "power mode) on exit.\n"
+                "This option disables this cleanup."
     },
     {
         .longopt_id = OPT_NO_CLIPBOARD_AUTOSYNC,
@@ -254,6 +267,13 @@ static const struct sc_option options[] = {
                 "it changes.\n"
                 "This option disables this automatic synchronization."
     },
+    {
+        .longopt_id = OPT_NO_DOWNSIZE_ON_ERROR,
+        .longopt = "no-downsize-on-error",
+        .text = "By default, on MediaCodec error, scrcpy automatically tries "
+                "again with a lower definition.\n"
+                "This option disables this behavior.",
+    },
     {
         .shortopt = 'n',
         .longopt = "no-control",
@@ -289,8 +309,7 @@ static const struct sc_option options[] = {
                 "control of the mouse back to the computer.\n"
                 "If any of --hid-keyboard or --hid-mouse is set, only enable "
                 "keyboard or mouse respectively, otherwise enable both.\n"
-                "It may only work over USB, and is currently only supported "
-                "on Linux.\n"
+                "It may only work over USB.\n"
                 "See --hid-keyboard and --hid-mouse.",
     },
     {
@@ -315,6 +334,12 @@ static const struct sc_option options[] = {
                 "special character, but breaks the expected behavior of alpha "
                 "keys in games (typically WASD).",
     },
+    {
+        .longopt_id = OPT_PRINT_FPS,
+        .longopt = "print-fps",
+        .text = "Start FPS counter, to print framerate logs to the console. "
+                "It can be started or stopped at any time with MOD+i.",
+    },
     {
         .longopt_id = OPT_PUSH_TARGET,
         .longopt = "push-target",
@@ -1320,6 +1345,12 @@ parse_args_with_getopt(struct scrcpy_cli_args *args, int argc, char *argv[],
                     return false;
                 }
                 break;
+            case 'd':
+                opts->select_usb = true;
+                break;
+            case 'e':
+                opts->select_tcpip = true;
+                break;
             case 'f':
                 opts->fullscreen = true;
                 break;
@@ -1339,8 +1370,7 @@ parse_args_with_getopt(struct scrcpy_cli_args *args, int argc, char *argv[],
                 opts->keyboard_input_mode = SC_KEYBOARD_INPUT_MODE_HID;
                 break;
 #else
-                LOGE("HID over AOA (-K/--hid-keyboard) is not supported on "
-                     "this platform. It is only available on Linux.");
+                LOGE("HID over AOA (-K/--hid-keyboard) is disabled.");
                 return false;
 #endif
             case OPT_MAX_FPS:
@@ -1358,8 +1388,7 @@ parse_args_with_getopt(struct scrcpy_cli_args *args, int argc, char *argv[],
                 opts->mouse_input_mode = SC_MOUSE_INPUT_MODE_HID;
                 break;
 #else
-                LOGE("HID over AOA (-M/--hid-mouse) is not supported on this"
-                     "platform. It is only available on Linux.");
+                LOGE("HID over AOA (-M/--hid-mouse) is disabled.");
                 return false;
 #endif
             case OPT_LOCK_VIDEO_ORIENTATION:
@@ -1517,13 +1546,18 @@ parse_args_with_getopt(struct scrcpy_cli_args *args, int argc, char *argv[],
             case OPT_NO_DOWNSIZE_ON_ERROR:
                 opts->downsize_on_error = false;
                 break;
+            case OPT_NO_CLEANUP:
+                opts->cleanup = false;
+                break;
+            case OPT_PRINT_FPS:
+                opts->start_fps_counter = true;
+                break;
             case OPT_OTG:
 #ifdef HAVE_USB
                 opts->otg = true;
                 break;
 #else
-                LOGE("OTG mode (--otg) is not supported on this platform. It "
-                     "is only available on Linux.");
+                LOGE("OTG mode (--otg) is disabled.");
                 return false;
 #endif
             case OPT_V4L2_SINK:
@@ -1531,7 +1565,8 @@ parse_args_with_getopt(struct scrcpy_cli_args *args, int argc, char *argv[],
                 opts->v4l2_device = optarg;
                 break;
 #else
-                LOGE("V4L2 (--v4l2-sink) is only available on Linux.");
+                LOGE("V4L2 (--v4l2-sink) is disabled (or unsupported on this "
+                     "platform).");
                 return false;
 #endif
             case OPT_V4L2_BUFFER:
@@ -1559,8 +1594,16 @@ parse_args_with_getopt(struct scrcpy_cli_args *args, int argc, char *argv[],
     // If a TCP/IP address is provided, then tcpip must be enabled
     assert(opts->tcpip || !opts->tcpip_dst);
 
-    if (opts->serial && opts->tcpip_dst) {
-        LOGE("Incompatible options: -s/--serial and --tcpip with an argument");
+    unsigned selectors = !!opts->serial
+                       + !!opts->tcpip_dst
+                       + opts->select_tcpip
+                       + opts->select_usb;
+    if (selectors > 1) {
+        LOGE("At most one device selector option may be passed, among:\n"
+             "  --serial (-s)\n"
+             "  --select-usb (-d)\n"
+             "  --select-tcpip (-e)\n"
+             "  --tcpip=<addr> (with an argument)");
         return false;
     }
 
@@ -1637,6 +1680,18 @@ parse_args_with_getopt(struct scrcpy_cli_args *args, int argc, char *argv[],
     }
 
 #ifdef HAVE_USB
+
+# ifdef _WIN32
+    if (!opts->otg && (opts->keyboard_input_mode == SC_KEYBOARD_INPUT_MODE_HID
+                    || opts->mouse_input_mode == SC_MOUSE_INPUT_MODE_HID)) {
+        LOGE("On Windows, it is not possible to open a USB device already open "
+             "by another process (like adb).");
+        LOGE("Therefore, -K/--hid-keyboard and -M/--hid-mouse may only work in "
+             "OTG mode (--otg).");
+        return false;
+    }
+# endif
+
     if (opts->otg) {
         // OTG mode is compatible with only very few options.
         // Only report obvious errors.
@@ -1664,12 +1719,12 @@ parse_args_with_getopt(struct scrcpy_cli_args *args, int argc, char *argv[],
             LOGE("OTG mode: could not select display");
             return false;
         }
-#ifdef HAVE_V4L2
+# ifdef HAVE_V4L2
         if (opts->v4l2_device) {
             LOGE("OTG mode: could not sink to V4L2 device");
             return false;
         }
-#endif
+# endif
     }
 #endif
 

app/src/compat.h

@@ -8,8 +8,10 @@
 
 #ifndef __WIN32
 # define PRIu64_ PRIu64
+# define SC_PRIsizet "zu"
 #else
 # define PRIu64_ "I64u"  // Windows...
+# define SC_PRIsizet "Iu"
 #endif
 
 // In ffmpeg/doc/APIchanges:

app/src/control_msg.c

@@ -63,17 +63,17 @@ static const char *const copy_key_labels[] = {
 
 static void
 write_position(uint8_t *buf, const struct sc_position *position) {
-    buffer_write32be(&buf[0], position->point.x);
-    buffer_write32be(&buf[4], position->point.y);
-    buffer_write16be(&buf[8], position->screen_size.width);
-    buffer_write16be(&buf[10], position->screen_size.height);
+    sc_write32be(&buf[0], position->point.x);
+    sc_write32be(&buf[4], position->point.y);
+    sc_write16be(&buf[8], position->screen_size.width);
+    sc_write16be(&buf[10], position->screen_size.height);
 }
 
 // write length (4 bytes) + string (non null-terminated)
 static size_t
 write_string(const char *utf8, size_t max_len, unsigned char *buf) {
     size_t len = sc_str_utf8_truncation_index(utf8, max_len);
-    buffer_write32be(buf, len);
+    sc_write32be(buf, len);
     memcpy(&buf[4], utf8, len);
     return 4 + len;
 }
@@ -94,9 +94,9 @@ sc_control_msg_serialize(const struct sc_control_msg *msg, unsigned char *buf) {
     switch (msg->type) {
         case SC_CONTROL_MSG_TYPE_INJECT_KEYCODE:
             buf[1] = msg->inject_keycode.action;
-            buffer_write32be(&buf[2], msg->inject_keycode.keycode);
-            buffer_write32be(&buf[6], msg->inject_keycode.repeat);
-            buffer_write32be(&buf[10], msg->inject_keycode.metastate);
+            sc_write32be(&buf[2], msg->inject_keycode.keycode);
+            sc_write32be(&buf[6], msg->inject_keycode.repeat);
+            sc_write32be(&buf[10], msg->inject_keycode.metastate);
             return 14;
         case SC_CONTROL_MSG_TYPE_INJECT_TEXT: {
             size_t len =
@@ -106,20 +106,20 @@ sc_control_msg_serialize(const struct sc_control_msg *msg, unsigned char *buf) {
         }
         case SC_CONTROL_MSG_TYPE_INJECT_TOUCH_EVENT:
             buf[1] = msg->inject_touch_event.action;
-            buffer_write64be(&buf[2], msg->inject_touch_event.pointer_id);
+            sc_write64be(&buf[2], msg->inject_touch_event.pointer_id);
             write_position(&buf[10], &msg->inject_touch_event.position);
             uint16_t pressure =
                 to_fixed_point_16(msg->inject_touch_event.pressure);
-            buffer_write16be(&buf[22], pressure);
-            buffer_write32be(&buf[24], msg->inject_touch_event.buttons);
+            sc_write16be(&buf[22], pressure);
+            sc_write32be(&buf[24], msg->inject_touch_event.buttons);
             return 28;
         case SC_CONTROL_MSG_TYPE_INJECT_SCROLL_EVENT:
             write_position(&buf[1], &msg->inject_scroll_event.position);
-            buffer_write32be(&buf[13],
+            sc_write32be(&buf[13],
                              (uint32_t) msg->inject_scroll_event.hscroll);
-            buffer_write32be(&buf[17],
+            sc_write32be(&buf[17],
                              (uint32_t) msg->inject_scroll_event.vscroll);
-            buffer_write32be(&buf[21], msg->inject_scroll_event.buttons);
+            sc_write32be(&buf[21], msg->inject_scroll_event.buttons);
             return 25;
         case SC_CONTROL_MSG_TYPE_BACK_OR_SCREEN_ON:
             buf[1] = msg->inject_keycode.action;
@@ -128,7 +128,7 @@ sc_control_msg_serialize(const struct sc_control_msg *msg, unsigned char *buf) {
             buf[1] = msg->get_clipboard.copy_key;
             return 2;
         case SC_CONTROL_MSG_TYPE_SET_CLIPBOARD:
-            buffer_write64be(&buf[1], msg->set_clipboard.sequence);
+            sc_write64be(&buf[1], msg->set_clipboard.sequence);
             buf[9] = !!msg->set_clipboard.paste;
             size_t len = write_string(msg->set_clipboard.text,
                                       SC_CONTROL_MSG_CLIPBOARD_TEXT_MAX_LENGTH,

app/src/controller.c

@@ -113,7 +113,7 @@ sc_controller_start(struct sc_controller *controller) {
     bool ok = sc_thread_create(&controller->thread, run_controller,
                                "scrcpy-ctl", controller);
     if (!ok) {
-        LOGC("Could not start controller thread");
+        LOGE("Could not start controller thread");
         return false;
     }
 

app/src/demuxer.c

@@ -10,10 +10,12 @@
 #include "util/buffer_util.h"
 #include "util/log.h"
 
-#define BUFSIZE 0x10000
+#define SC_PACKET_HEADER_SIZE 12
 
-#define HEADER_SIZE 12
-#define NO_PTS UINT64_C(-1)
+#define SC_PACKET_FLAG_CONFIG    (UINT64_C(1) << 63)
+#define SC_PACKET_FLAG_KEY_FRAME (UINT64_C(1) << 62)
+
+#define SC_PACKET_PTS_MASK (SC_PACKET_FLAG_KEY_FRAME - 1)
 
 static bool
 sc_demuxer_recv_packet(struct sc_demuxer *demuxer, AVPacket *packet) {
@@ -28,16 +30,24 @@ sc_demuxer_recv_packet(struct sc_demuxer *demuxer, AVPacket *packet) {
     //                    size
     //
     // It is followed by <packet_size> bytes containing the packet/frame.
+    //
+    // The most significant bits of the PTS are used for packet flags:
+    //
+    //  byte 7   byte 6   byte 5   byte 4   byte 3   byte 2   byte 1   byte 0
+    // CK...... ........ ........ ........ ........ ........ ........ ........
+    // ^^<------------------------------------------------------------------->
+    // ||                                PTS
+    // | `- config packet
+    //  `-- key frame
 
-    uint8_t header[HEADER_SIZE];
-    ssize_t r = net_recv_all(demuxer->socket, header, HEADER_SIZE);
-    if (r < HEADER_SIZE) {
+    uint8_t header[SC_PACKET_HEADER_SIZE];
+    ssize_t r = net_recv_all(demuxer->socket, header, SC_PACKET_HEADER_SIZE);
+    if (r < SC_PACKET_HEADER_SIZE) {
         return false;
     }
 
-    uint64_t pts = buffer_read64be(header);
-    uint32_t len = buffer_read32be(&header[8]);
-    assert(pts == NO_PTS || (pts & 0x8000000000000000) == 0);
+    uint64_t pts_flags = sc_read64be(header);
+    uint32_t len = sc_read32be(&header[8]);
     assert(len);
 
     if (av_new_packet(packet, len)) {
@@ -51,8 +61,17 @@ sc_demuxer_recv_packet(struct sc_demuxer *demuxer, AVPacket *packet) {
         return false;
     }
 
-    packet->pts = pts != NO_PTS ? (int64_t) pts : AV_NOPTS_VALUE;
+    if (pts_flags & SC_PACKET_FLAG_CONFIG) {
+        packet->pts = AV_NOPTS_VALUE;
+    } else {
+        packet->pts = pts_flags & SC_PACKET_PTS_MASK;
+    }
 
+    if (pts_flags & SC_PACKET_FLAG_KEY_FRAME) {
+        packet->flags |= AV_PKT_FLAG_KEY;
+    }
+
+    packet->dts = packet->pts;
     return true;
 }
 
@@ -69,28 +88,6 @@ push_packet_to_sinks(struct sc_demuxer *demuxer, const AVPacket *packet) {
     return true;
 }
 
-static void
-sc_demuxer_parse(struct sc_demuxer *demuxer, AVPacket *packet) {
-    uint8_t *in_data = packet->data;
-    int in_len = packet->size;
-    uint8_t *out_data = NULL;
-    int out_len = 0;
-    int r = av_parser_parse2(demuxer->parser, demuxer->codec_ctx,
-                             &out_data, &out_len, in_data, in_len,
-                             AV_NOPTS_VALUE, AV_NOPTS_VALUE, -1);
-
-    // PARSER_FLAG_COMPLETE_FRAMES is set
-    assert(r == in_len);
-    (void) r;
-    assert(out_len == in_len);
-
-    if (demuxer->parser->key_frame == 1) {
-        packet->flags |= AV_PKT_FLAG_KEY;
-    }
-
-    packet->dts = packet->pts;
-}
-
 static bool
 sc_demuxer_push_packet(struct sc_demuxer *demuxer, AVPacket *packet) {
     bool is_config = packet->pts == AV_NOPTS_VALUE;
@@ -130,11 +127,6 @@ sc_demuxer_push_packet(struct sc_demuxer *demuxer, AVPacket *packet) {
         }
     }
 
-    if (!is_config) {
-        // data packet
-        sc_demuxer_parse(demuxer, packet);
-    }
-
     bool ok = push_packet_to_sinks(demuxer, packet);
 
     if (!is_config && demuxer->pending) {
@@ -276,7 +268,7 @@ sc_demuxer_start(struct sc_demuxer *demuxer) {
     bool ok = sc_thread_create(&demuxer->thread, run_demuxer, "scrcpy-demuxer",
                                demuxer);
     if (!ok) {
-        LOGC("Could not start demuxer thread");
+        LOGE("Could not start demuxer thread");
         return false;
     }
     return true;

app/src/device_msg.c

@@ -18,7 +18,7 @@ device_msg_deserialize(const unsigned char *buf, size_t len,
     msg->type = buf[0];
     switch (msg->type) {
         case DEVICE_MSG_TYPE_CLIPBOARD: {
-            size_t clipboard_len = buffer_read32be(&buf[1]);
+            size_t clipboard_len = sc_read32be(&buf[1]);
             if (clipboard_len > len - 5) {
                 return 0; // not available
             }
@@ -36,7 +36,7 @@ device_msg_deserialize(const unsigned char *buf, size_t len,
             return 5 + clipboard_len;
         }
         case DEVICE_MSG_TYPE_ACK_CLIPBOARD: {
-            uint64_t sequence = buffer_read64be(&buf[1]);
+            uint64_t sequence = sc_read64be(&buf[1]);
             msg->ack_clipboard.sequence = sequence;
             return 9;
         }

app/src/file_pusher.c

@@ -156,7 +156,7 @@ sc_file_pusher_start(struct sc_file_pusher *fp) {
 
     bool ok = sc_thread_create(&fp->thread, run_file_pusher, "scrcpy-file", fp);
     if (!ok) {
-        LOGC("Could not start file_pusher thread");
+        LOGE("Could not start file_pusher thread");
         return false;
     }
 

app/src/fps_counter.c

@@ -4,10 +4,10 @@
 
 #include "util/log.h"
 
-#define FPS_COUNTER_INTERVAL SC_TICK_FROM_SEC(1)
+#define SC_FPS_COUNTER_INTERVAL SC_TICK_FROM_SEC(1)
 
 bool
-fps_counter_init(struct fps_counter *counter) {
+sc_fps_counter_init(struct sc_fps_counter *counter) {
     bool ok = sc_mutex_init(&counter->mutex);
     if (!ok) {
         return false;
@@ -27,26 +27,26 @@ fps_counter_init(struct fps_counter *counter) {
 }
 
 void
-fps_counter_destroy(struct fps_counter *counter) {
+sc_fps_counter_destroy(struct sc_fps_counter *counter) {
     sc_cond_destroy(&counter->state_cond);
     sc_mutex_destroy(&counter->mutex);
 }
 
 static inline bool
-is_started(struct fps_counter *counter) {
+is_started(struct sc_fps_counter *counter) {
     return atomic_load_explicit(&counter->started, memory_order_acquire);
 }
 
 static inline void
-set_started(struct fps_counter *counter, bool started) {
+set_started(struct sc_fps_counter *counter, bool started) {
     atomic_store_explicit(&counter->started, started, memory_order_release);
 }
 
 // must be called with mutex locked
 static void
-display_fps(struct fps_counter *counter) {
+display_fps(struct sc_fps_counter *counter) {
     unsigned rendered_per_second =
-        counter->nr_rendered * SC_TICK_FREQ / FPS_COUNTER_INTERVAL;
+        counter->nr_rendered * SC_TICK_FREQ / SC_FPS_COUNTER_INTERVAL;
     if (counter->nr_skipped) {
         LOGI("%u fps (+%u frames skipped)", rendered_per_second,
                                             counter->nr_skipped);
@@ -57,7 +57,7 @@ display_fps(struct fps_counter *counter) {
 
 // must be called with mutex locked
 static void
-check_interval_expired(struct fps_counter *counter, uint32_t now) {
+check_interval_expired(struct sc_fps_counter *counter, sc_tick now) {
     if (now < counter->next_timestamp) {
         return;
     }
@@ -67,13 +67,13 @@ check_interval_expired(struct fps_counter *counter, uint32_t now) {
     counter->nr_skipped = 0;
     // add a multiple of the interval
     uint32_t elapsed_slices =
-        (now - counter->next_timestamp) / FPS_COUNTER_INTERVAL + 1;
-    counter->next_timestamp += FPS_COUNTER_INTERVAL * elapsed_slices;
+        (now - counter->next_timestamp) / SC_FPS_COUNTER_INTERVAL + 1;
+    counter->next_timestamp += SC_FPS_COUNTER_INTERVAL * elapsed_slices;
 }
 
 static int
 run_fps_counter(void *data) {
-    struct fps_counter *counter = data;
+    struct sc_fps_counter *counter = data;
 
     sc_mutex_lock(&counter->mutex);
     while (!counter->interrupted) {
@@ -94,9 +94,9 @@ run_fps_counter(void *data) {
 }
 
 bool
-fps_counter_start(struct fps_counter *counter) {
+sc_fps_counter_start(struct sc_fps_counter *counter) {
     sc_mutex_lock(&counter->mutex);
-    counter->next_timestamp = sc_tick_now() + FPS_COUNTER_INTERVAL;
+    counter->next_timestamp = sc_tick_now() + SC_FPS_COUNTER_INTERVAL;
     counter->nr_rendered = 0;
     counter->nr_skipped = 0;
     sc_mutex_unlock(&counter->mutex);
@@ -117,22 +117,24 @@ fps_counter_start(struct fps_counter *counter) {
         counter->thread_started = true;
     }
 
+    LOGI("FPS counter started");
     return true;
 }
 
 void
-fps_counter_stop(struct fps_counter *counter) {
+sc_fps_counter_stop(struct sc_fps_counter *counter) {
     set_started(counter, false);
     sc_cond_signal(&counter->state_cond);
+    LOGI("FPS counter stopped");
 }
 
 bool
-fps_counter_is_started(struct fps_counter *counter) {
+sc_fps_counter_is_started(struct sc_fps_counter *counter) {
     return is_started(counter);
 }
 
 void
-fps_counter_interrupt(struct fps_counter *counter) {
+sc_fps_counter_interrupt(struct sc_fps_counter *counter) {
     if (!counter->thread_started) {
         return;
     }
@@ -145,7 +147,7 @@ fps_counter_interrupt(struct fps_counter *counter) {
 }
 
 void
-fps_counter_join(struct fps_counter *counter) {
+sc_fps_counter_join(struct sc_fps_counter *counter) {
     if (counter->thread_started) {
         // interrupted must be set by the thread calling join(), so no need to
         // lock for the assertion
@@ -156,7 +158,7 @@ fps_counter_join(struct fps_counter *counter) {
 }
 
 void
-fps_counter_add_rendered_frame(struct fps_counter *counter) {
+sc_fps_counter_add_rendered_frame(struct sc_fps_counter *counter) {
     if (!is_started(counter)) {
         return;
     }
@@ -169,7 +171,7 @@ fps_counter_add_rendered_frame(struct fps_counter *counter) {
 }
 
 void
-fps_counter_add_skipped_frame(struct fps_counter *counter) {
+sc_fps_counter_add_skipped_frame(struct sc_fps_counter *counter) {
     if (!is_started(counter)) {
         return;
     }

app/src/fps_counter.h

@@ -9,7 +9,7 @@
 
 #include "util/thread.h"
 
-struct fps_counter {
+struct sc_fps_counter {
     sc_thread thread;
     sc_mutex mutex;
     sc_cond state_cond;
@@ -28,32 +28,32 @@ struct fps_counter {
 };
 
 bool
-fps_counter_init(struct fps_counter *counter);
+sc_fps_counter_init(struct sc_fps_counter *counter);
 
 void
-fps_counter_destroy(struct fps_counter *counter);
+sc_fps_counter_destroy(struct sc_fps_counter *counter);
 
 bool
-fps_counter_start(struct fps_counter *counter);
+sc_fps_counter_start(struct sc_fps_counter *counter);
 
 void
-fps_counter_stop(struct fps_counter *counter);
+sc_fps_counter_stop(struct sc_fps_counter *counter);
 
 bool
-fps_counter_is_started(struct fps_counter *counter);
+sc_fps_counter_is_started(struct sc_fps_counter *counter);
 
 // request to stop the thread (on quit)
-// must be called before fps_counter_join()
+// must be called before sc_fps_counter_join()
 void
-fps_counter_interrupt(struct fps_counter *counter);
+sc_fps_counter_interrupt(struct sc_fps_counter *counter);
 
 void
-fps_counter_join(struct fps_counter *counter);
+sc_fps_counter_join(struct sc_fps_counter *counter);
 
 void
-fps_counter_add_rendered_frame(struct fps_counter *counter);
+sc_fps_counter_add_rendered_frame(struct sc_fps_counter *counter);
 
 void
-fps_counter_add_skipped_frame(struct fps_counter *counter);
+sc_fps_counter_add_skipped_frame(struct sc_fps_counter *counter);
 
 #endif

app/src/input_manager.c

@@ -242,18 +242,14 @@ set_screen_power_mode(struct sc_controller *controller,
 }
 
 static void
-switch_fps_counter_state(struct fps_counter *fps_counter) {
+switch_fps_counter_state(struct sc_fps_counter *fps_counter) {
     // the started state can only be written from the current thread, so there
     // is no ToCToU issue
-    if (fps_counter_is_started(fps_counter)) {
-        fps_counter_stop(fps_counter);
-        LOGI("FPS counter stopped");
+    if (sc_fps_counter_is_started(fps_counter)) {
+        sc_fps_counter_stop(fps_counter);
     } else {
-        if (fps_counter_start(fps_counter)) {
-            LOGI("FPS counter started");
-        } else {
-            LOGE("FPS counter starting failed");
-        }
+        sc_fps_counter_start(fps_counter);
+        // Any error is already logged
     }
 }
 

app/src/main.c

@@ -15,27 +15,7 @@
 #include "scrcpy.h"
 #include "usb/scrcpy_otg.h"
 #include "util/log.h"
-
-static void
-print_version(void) {
-    printf("\ndependencies:\n");
-    printf(" - SDL %d.%d.%d\n", SDL_MAJOR_VERSION, SDL_MINOR_VERSION,
-                                SDL_PATCHLEVEL);
-    printf(" - libavcodec %d.%d.%d\n", LIBAVCODEC_VERSION_MAJOR,
-                                       LIBAVCODEC_VERSION_MINOR,
-                                       LIBAVCODEC_VERSION_MICRO);
-    printf(" - libavformat %d.%d.%d\n", LIBAVFORMAT_VERSION_MAJOR,
-                                        LIBAVFORMAT_VERSION_MINOR,
-                                        LIBAVFORMAT_VERSION_MICRO);
-    printf(" - libavutil %d.%d.%d\n", LIBAVUTIL_VERSION_MAJOR,
-                                      LIBAVUTIL_VERSION_MINOR,
-                                      LIBAVUTIL_VERSION_MICRO);
-#ifdef HAVE_V4L2
-    printf(" - libavdevice %d.%d.%d\n", LIBAVDEVICE_VERSION_MAJOR,
-                                        LIBAVDEVICE_VERSION_MINOR,
-                                        LIBAVDEVICE_VERSION_MICRO);
-#endif
-}
+#include "version.h"
 
 int
 main(int argc, char *argv[]) {
@@ -71,7 +51,7 @@ main(int argc, char *argv[]) {
     }
 
     if (args.version) {
-        print_version();
+        scrcpy_print_version();
         return 0;
     }
 

app/src/options.c

@@ -60,4 +60,8 @@ const struct scrcpy_options scrcpy_options_default = {
     .downsize_on_error = true,
     .tcpip = false,
     .tcpip_dst = NULL,
+    .select_tcpip = false,
+    .select_usb = false,
+    .cleanup = true,
+    .start_fps_counter = false,
 };

app/src/options.h

@@ -135,6 +135,10 @@ struct scrcpy_options {
     bool downsize_on_error;
     bool tcpip;
     const char *tcpip_dst;
+    bool select_usb;
+    bool select_tcpip;
+    bool cleanup;
+    bool start_fps_counter;
 };
 
 extern const struct scrcpy_options scrcpy_options_default;

app/src/receiver.c

@@ -114,7 +114,7 @@ receiver_start(struct receiver *receiver) {
     bool ok = sc_thread_create(&receiver->thread, run_receiver,
                                "scrcpy-receiver", receiver);
     if (!ok) {
-        LOGC("Could not start receiver thread");
+        LOGE("Could not start receiver thread");
         return false;
     }
 

app/src/recorder.c

@@ -290,7 +290,7 @@ sc_recorder_open(struct sc_recorder *recorder, const AVCodec *input_codec) {
     ok = sc_thread_create(&recorder->thread, run_recorder, "scrcpy-recorder",
                           recorder);
     if (!ok) {
-        LOGC("Could not start recorder thread");
+        LOGE("Could not start recorder thread");
         goto error_avio_close;
     }
 

app/src/scrcpy.c

@@ -269,7 +269,7 @@ scrcpy(struct scrcpy_options *options) {
 
     // Minimal SDL initialization
     if (SDL_Init(SDL_INIT_EVENTS)) {
-        LOGC("Could not initialize SDL: %s", SDL_GetError());
+        LOGE("Could not initialize SDL: %s", SDL_GetError());
         return false;
     }
 
@@ -297,6 +297,8 @@ scrcpy(struct scrcpy_options *options) {
 
     struct sc_server_params params = {
         .req_serial = options->serial,
+        .select_usb = options->select_usb,
+        .select_tcpip = options->select_tcpip,
         .log_level = options->log_level,
         .crop = options->crop,
         .port_range = options->port_range,
@@ -318,6 +320,7 @@ scrcpy(struct scrcpy_options *options) {
         .downsize_on_error = options->downsize_on_error,
         .tcpip = options->tcpip,
         .tcpip_dst = options->tcpip_dst,
+        .cleanup = options->cleanup,
     };
 
     static const struct sc_server_callbacks cbs = {
@@ -341,7 +344,7 @@ scrcpy(struct scrcpy_options *options) {
 
     // Initialize SDL video in addition if display is enabled
     if (options->display && SDL_Init(SDL_INIT_VIDEO)) {
-        LOGC("Could not initialize SDL: %s", SDL_GetError());
+        LOGE("Could not initialize SDL: %s", SDL_GetError());
         goto end;
     }
 
@@ -430,32 +433,19 @@ scrcpy(struct scrcpy_options *options) {
             }
 
             assert(serial);
-            struct sc_usb_device usb_devices[16];
-            ssize_t count = sc_usb_find_devices(&s->usb, serial, usb_devices,
-                                                ARRAY_LEN(usb_devices));
-            if (count <= 0) {
-                LOGE("Could not find USB device %s", serial);
+            struct sc_usb_device usb_device;
+            ok = sc_usb_select_device(&s->usb, serial, &usb_device);
+            if (!ok) {
                 sc_usb_destroy(&s->usb);
-                sc_acksync_destroy(&s->acksync);
                 goto aoa_hid_end;
             }
 
-            if (count > 1) {
-                LOGE("Multiple (%d) devices with serial %s", (int) count, serial);
-                sc_usb_device_destroy_all(usb_devices, count);
-                sc_usb_destroy(&s->usb);
-                sc_acksync_destroy(&s->acksync);
-                goto aoa_hid_end;
-            }
-
-            struct sc_usb_device *usb_device = &usb_devices[0];
-
             LOGI("USB device: %s (%04" PRIx16 ":%04" PRIx16 ") %s %s",
-                 usb_device->serial, usb_device->vid, usb_device->pid,
-                 usb_device->manufacturer, usb_device->product);
+                 usb_device.serial, usb_device.vid, usb_device.pid,
+                 usb_device.manufacturer, usb_device.product);
 
-            ok = sc_usb_connect(&s->usb, usb_device->device, NULL, NULL);
-            sc_usb_device_destroy(usb_device);
+            ok = sc_usb_connect(&s->usb, usb_device.device, NULL, NULL);
+            sc_usb_device_destroy(&usb_device);
             if (!ok) {
                 LOGE("Failed to connect to USB device %s", serial);
                 sc_usb_destroy(&s->usb);
@@ -598,6 +588,7 @@ aoa_hid_end:
             .rotation = options->rotation,
             .mipmaps = options->mipmaps,
             .fullscreen = options->fullscreen,
+            .start_fps_counter = options->start_fps_counter,
             .buffering_time = options->display_buffer,
         };
 

app/src/screen.c

@@ -163,14 +163,44 @@ sc_screen_is_relative_mode(struct sc_screen *screen) {
 }
 
 static void
-sc_screen_capture_mouse(struct sc_screen *screen, bool capture) {
+sc_screen_set_mouse_capture(struct sc_screen *screen, bool capture) {
+#ifdef __APPLE__
+    // Workaround for SDL bug on macOS:
+    // <https://github.com/libsdl-org/SDL/issues/5340>
+    if (capture) {
+        int mouse_x, mouse_y;
+        SDL_GetGlobalMouseState(&mouse_x, &mouse_y);
+
+        int x, y, w, h;
+        SDL_GetWindowPosition(screen->window, &x, &y);
+        SDL_GetWindowSize(screen->window, &w, &h);
+
+        bool outside_window = mouse_x < x || mouse_x >= x + w
+                           || mouse_y < y || mouse_y >= y + h;
+        if (outside_window) {
+            SDL_WarpMouseInWindow(screen->window, w / 2, h / 2);
+        }
+    }
+#else
+    (void) screen;
+#endif
     if (SDL_SetRelativeMouseMode(capture)) {
         LOGE("Could not set relative mouse mode to %s: %s",
              capture ? "true" : "false", SDL_GetError());
-        return;
     }
+}
 
-    screen->mouse_captured = capture;
+static inline bool
+sc_screen_get_mouse_capture(struct sc_screen *screen) {
+    (void) screen;
+    return SDL_GetRelativeMouseMode();
+}
+
+static inline void
+sc_screen_toggle_mouse_capture(struct sc_screen *screen) {
+    (void) screen;
+    bool new_value = !sc_screen_get_mouse_capture(screen);
+    sc_screen_set_mouse_capture(screen, new_value);
 }
 
 static void
@@ -340,7 +370,7 @@ sc_video_buffer_on_new_frame(struct sc_video_buffer *vb, bool previous_skipped,
 
     bool need_new_event;
     if (previous_skipped) {
-        fps_counter_add_skipped_frame(&screen->fps_counter);
+        sc_fps_counter_add_skipped_frame(&screen->fps_counter);
         // The EVENT_NEW_FRAME triggered for the previous frame will consume
         // this new frame instead, unless the previous event failed
         need_new_event = screen->event_failed;
@@ -372,7 +402,6 @@ sc_screen_init(struct sc_screen *screen,
     screen->fullscreen = false;
     screen->maximized = false;
     screen->event_failed = false;
-    screen->mouse_captured = false;
     screen->mouse_capture_key_pressed = 0;
 
     screen->req.x = params->window_x;
@@ -380,6 +409,7 @@ sc_screen_init(struct sc_screen *screen,
     screen->req.width = params->window_width;
     screen->req.height = params->window_height;
     screen->req.fullscreen = params->fullscreen;
+    screen->req.start_fps_counter = params->start_fps_counter;
 
     static const struct sc_video_buffer_callbacks cbs = {
         .on_new_frame = sc_video_buffer_on_new_frame,
@@ -396,7 +426,7 @@ sc_screen_init(struct sc_screen *screen,
         goto error_destroy_video_buffer;
     }
 
-    if (!fps_counter_init(&screen->fps_counter)) {
+    if (!sc_fps_counter_init(&screen->fps_counter)) {
         goto error_stop_and_join_video_buffer;
     }
 
@@ -423,14 +453,14 @@ sc_screen_init(struct sc_screen *screen,
     screen->window =
         SDL_CreateWindow(params->window_title, 0, 0, 0, 0, window_flags);
     if (!screen->window) {
-        LOGC("Could not create window: %s", SDL_GetError());
+        LOGE("Could not create window: %s", SDL_GetError());
         goto error_destroy_fps_counter;
     }
 
     screen->renderer = SDL_CreateRenderer(screen->window, -1,
                                           SDL_RENDERER_ACCELERATED);
     if (!screen->renderer) {
-        LOGC("Could not create renderer: %s", SDL_GetError());
+        LOGE("Could not create renderer: %s", SDL_GetError());
         goto error_destroy_window;
     }
 
@@ -479,7 +509,7 @@ sc_screen_init(struct sc_screen *screen,
                                                   params->frame_size.height);
     screen->texture = create_texture(screen);
     if (!screen->texture) {
-        LOGC("Could not create texture: %s", SDL_GetError());
+        LOGE("Could not create texture: %s", SDL_GetError());
         goto error_destroy_renderer;
     }
 
@@ -528,7 +558,7 @@ error_destroy_renderer:
 error_destroy_window:
     SDL_DestroyWindow(screen->window);
 error_destroy_fps_counter:
-    fps_counter_destroy(&screen->fps_counter);
+    sc_fps_counter_destroy(&screen->fps_counter);
 error_stop_and_join_video_buffer:
     sc_video_buffer_stop(&screen->vb);
     sc_video_buffer_join(&screen->vb);
@@ -556,6 +586,10 @@ sc_screen_show_initial_window(struct sc_screen *screen) {
         sc_screen_switch_fullscreen(screen);
     }
 
+    if (screen->req.start_fps_counter) {
+        sc_fps_counter_start(&screen->fps_counter);
+    }
+
     SDL_ShowWindow(screen->window);
 }
 
@@ -567,13 +601,13 @@ sc_screen_hide_window(struct sc_screen *screen) {
 void
 sc_screen_interrupt(struct sc_screen *screen) {
     sc_video_buffer_stop(&screen->vb);
-    fps_counter_interrupt(&screen->fps_counter);
+    sc_fps_counter_interrupt(&screen->fps_counter);
 }
 
 void
 sc_screen_join(struct sc_screen *screen) {
     sc_video_buffer_join(&screen->vb);
-    fps_counter_join(&screen->fps_counter);
+    sc_fps_counter_join(&screen->fps_counter);
 }
 
 void
@@ -585,7 +619,7 @@ sc_screen_destroy(struct sc_screen *screen) {
     SDL_DestroyTexture(screen->texture);
     SDL_DestroyRenderer(screen->renderer);
     SDL_DestroyWindow(screen->window);
-    fps_counter_destroy(&screen->fps_counter);
+    sc_fps_counter_destroy(&screen->fps_counter);
     sc_video_buffer_destroy(&screen->vb);
 }
 
@@ -666,7 +700,7 @@ prepare_for_frame(struct sc_screen *screen, struct sc_size new_frame_size) {
                      screen->frame_size.width, screen->frame_size.height);
         screen->texture = create_texture(screen);
         if (!screen->texture) {
-            LOGC("Could not create texture: %s", SDL_GetError());
+            LOGE("Could not create texture: %s", SDL_GetError());
             return false;
         }
     }
@@ -695,7 +729,7 @@ sc_screen_update_frame(struct sc_screen *screen) {
     sc_video_buffer_consume(&screen->vb, screen->frame);
     AVFrame *frame = screen->frame;
 
-    fps_counter_add_rendered_frame(&screen->fps_counter);
+    sc_fps_counter_add_rendered_frame(&screen->fps_counter);
 
     struct sc_size new_frame_size = {frame->width, frame->height};
     if (!prepare_for_frame(screen, new_frame_size)) {
@@ -710,7 +744,7 @@ sc_screen_update_frame(struct sc_screen *screen) {
 
         if (sc_screen_is_relative_mode(screen)) {
             // Capture mouse on start
-            sc_screen_capture_mouse(screen, true);
+            sc_screen_set_mouse_capture(screen, true);
         }
     }
 
@@ -823,7 +857,7 @@ sc_screen_handle_event(struct sc_screen *screen, SDL_Event *event) {
                     break;
                 case SDL_WINDOWEVENT_FOCUS_LOST:
                     if (relative_mode) {
-                        sc_screen_capture_mouse(screen, false);
+                        sc_screen_set_mouse_capture(screen, false);
                     }
                     break;
             }
@@ -853,8 +887,7 @@ sc_screen_handle_event(struct sc_screen *screen, SDL_Event *event) {
                     if (key == cap) {
                         // A mouse capture key has been pressed then released:
                         // toggle the capture mouse mode
-                        sc_screen_capture_mouse(screen,
-                                                !screen->mouse_captured);
+                        sc_screen_toggle_mouse_capture(screen);
                     }
                     // Mouse capture keys are never forwarded to the device
                     return;
@@ -864,7 +897,7 @@ sc_screen_handle_event(struct sc_screen *screen, SDL_Event *event) {
         case SDL_MOUSEWHEEL:
         case SDL_MOUSEMOTION:
         case SDL_MOUSEBUTTONDOWN:
-            if (relative_mode && !screen->mouse_captured) {
+            if (relative_mode && !sc_screen_get_mouse_capture(screen)) {
                 // Do not forward to input manager, the mouse will be captured
                 // on SDL_MOUSEBUTTONUP
                 return;
@@ -880,8 +913,8 @@ sc_screen_handle_event(struct sc_screen *screen, SDL_Event *event) {
             }
             break;
         case SDL_MOUSEBUTTONUP:
-            if (relative_mode && !screen->mouse_captured) {
-                sc_screen_capture_mouse(screen, true);
+            if (relative_mode && !sc_screen_get_mouse_capture(screen)) {
+                sc_screen_set_mouse_capture(screen, true);
                 return;
             }
             break;

app/src/screen.h

@@ -26,7 +26,7 @@ struct sc_screen {
 
     struct sc_input_manager im;
     struct sc_video_buffer vb;
-    struct fps_counter fps_counter;
+    struct sc_fps_counter fps_counter;
 
     // The initial requested window properties
     struct {
@@ -35,6 +35,7 @@ struct sc_screen {
         uint16_t width;
         uint16_t height;
         bool fullscreen;
+        bool start_fps_counter;
     } req;
 
     SDL_Window *window;
@@ -60,7 +61,6 @@ struct sc_screen {
 
     bool event_failed; // in case SDL_PushEvent() returned an error
 
-    bool mouse_captured; // only relevant in relative mouse mode
     // To enable/disable mouse capture, a mouse capture key (LALT, LGUI or
     // RGUI) must be pressed. This variable tracks the pressed capture key.
     SDL_Keycode mouse_capture_key_pressed;
@@ -94,6 +94,7 @@ struct sc_screen_params {
     bool mipmaps;
 
     bool fullscreen;
+    bool start_fps_counter;
 
     sc_tick buffering_time;
 };

app/src/server.c

@@ -244,6 +244,10 @@ execute_server(struct sc_server *server,
         // By default, downsize_on_error is true
         ADD_PARAM("downsize_on_error=false");
     }
+    if (!params->cleanup) {
+        // By default, cleanup is true
+        ADD_PARAM("cleanup=false");
+    }
 
 #undef ADD_PARAM
 
@@ -482,8 +486,10 @@ fail:
         }
     }
 
-    // Always leave this function with tunnel disabled
-    sc_adb_tunnel_close(tunnel, &server->intr, serial);
+    if (tunnel->enabled) {
+        // Always leave this function with tunnel disabled
+        sc_adb_tunnel_close(tunnel, &server->intr, serial);
+    }
 
     return false;
 }
@@ -503,22 +509,6 @@ sc_server_on_terminated(void *userdata) {
     LOGD("Server terminated");
 }
 
-static char *
-sc_server_read_serial(struct sc_server *server) {
-    char *serial;
-    if (server->params.req_serial) {
-        // The serial is already known
-        serial = strdup(server->params.req_serial);
-        if (!serial) {
-            LOG_OOM();
-        }
-    } else {
-        serial = sc_adb_get_serialno(&server->intr, 0);
-    }
-
-    return serial;
-}
-
 static bool
 is_tcpip_mode_enabled(struct sc_server *server, const char *serial) {
     struct sc_intr *intr = &server->intr;
@@ -641,51 +631,34 @@ sc_server_connect_to_tcpip(struct sc_server *server, const char *ip_port) {
     return true;
 }
 
+static bool
+sc_server_configure_tcpip_known_address(struct sc_server *server,
+                                        const char *addr) {
+    // Append ":5555" if no port is present
+    bool contains_port = strchr(addr, ':');
+    char *ip_port = contains_port ? strdup(addr) : append_port_5555(addr);
+    if (!ip_port) {
+        LOG_OOM();
+        return false;
+    }
+
+    server->serial = ip_port;
+    return sc_server_connect_to_tcpip(server, ip_port);
+}
 
 static bool
-sc_server_configure_tcpip(struct sc_server *server) {
-    char *ip_port;
+sc_server_configure_tcpip_unknown_address(struct sc_server *server,
+                                          const char *serial) {
+    bool is_already_tcpip = sc_adb_is_serial_tcpip(serial);
+    if (is_already_tcpip) {
+        // Nothing to do
+        LOGI("Device already connected via TCP/IP: %s", serial);
+        return true;
+    }
 
-    const struct sc_server_params *params = &server->params;
-
-    // If tcpip parameter is given, then it must connect to this address.
-    // Therefore, the device is unknown, so serial is meaningless at this point.
-    assert(!params->req_serial || !params->tcpip_dst);
-
-    if (params->tcpip_dst) {
-        // Append ":5555" if no port is present
-        bool contains_port = strchr(params->tcpip_dst, ':');
-        ip_port = contains_port ? strdup(params->tcpip_dst)
-                                : append_port_5555(params->tcpip_dst);
-        if (!ip_port) {
-            LOG_OOM();
-            return false;
-        }
-    } else {
-        // The device IP address must be retrieved from the current
-        // connected device
-        char *serial = sc_server_read_serial(server);
-        if (!serial) {
-            LOGE("Could not get device serial");
-            return false;
-        }
-
-        // The serial is either the real serial when connected via USB, or
-        // the IP:PORT when connected over TCP/IP. Only the latter contains
-        // a colon.
-        bool is_already_tcpip = strchr(serial, ':');
-        if (is_already_tcpip) {
-            // Nothing to do
-            LOGI("Device already connected via TCP/IP: %s", serial);
-            free(serial);
-            return true;
-        }
-
-        ip_port = sc_server_switch_to_tcpip(server, serial);
-        free(serial);
-        if (!ip_port) {
-            return false;
-        }
+    char *ip_port = sc_server_switch_to_tcpip(server, serial);
+    if (!ip_port) {
+        return false;
     }
 
     server->serial = ip_port;
@@ -698,16 +671,69 @@ run_server(void *data) {
 
     const struct sc_server_params *params = &server->params;
 
-    if (params->tcpip) {
-        bool ok = sc_server_configure_tcpip(server);
+    // Execute "adb start-server" before "adb devices" so that daemon starting
+    // output/errors is correctly printed in the console ("adb devices" output
+    // is parsed, so it is not output)
+    bool ok = sc_adb_start_server(&server->intr, 0);
+    if (!ok) {
+        LOGE("Could not start adb daemon");
+        goto error_connection_failed;
+    }
+
+    // params->tcpip_dst implies params->tcpip
+    assert(!params->tcpip_dst || params->tcpip);
+
+    // If tcpip_dst parameter is given, then it must connect to this address.
+    // Therefore, the device is unknown, so serial is meaningless at this point.
+    assert(!params->req_serial || !params->tcpip_dst);
+
+    // A device must be selected via a serial in all cases except when --tcpip=
+    // is called with a parameter (in that case, the device may initially not
+    // exist, and scrcpy will execute "adb connect").
+    bool need_initial_serial = !params->tcpip_dst;
+
+    if (need_initial_serial) {
+        // At most one of the 3 following parameters may be set
+        assert(!!params->req_serial
+               + params->select_usb
+               + params->select_tcpip <= 1);
+
+        struct sc_adb_device_selector selector;
+        if (params->req_serial) {
+            selector.type = SC_ADB_DEVICE_SELECT_SERIAL;
+            selector.serial = params->req_serial;
+        } else if (params->select_usb) {
+            selector.type = SC_ADB_DEVICE_SELECT_USB;
+        } else if (params->select_tcpip) {
+            selector.type = SC_ADB_DEVICE_SELECT_TCPIP;
+        } else {
+            selector.type = SC_ADB_DEVICE_SELECT_ALL;
+        }
+        struct sc_adb_device device;
+        ok = sc_adb_select_device(&server->intr, &selector, 0, &device);
         if (!ok) {
             goto error_connection_failed;
         }
-        assert(server->serial);
+
+        if (params->tcpip) {
+            assert(!params->tcpip_dst);
+            ok = sc_server_configure_tcpip_unknown_address(server,
+                                                           device.serial);
+            sc_adb_device_destroy(&device);
+            if (!ok) {
+                goto error_connection_failed;
+            }
+            assert(server->serial);
+        } else {
+            // "move" the device.serial without copy
+            server->serial = device.serial;
+            // the serial must not be freed by the destructor
+            device.serial = NULL;
+            sc_adb_device_destroy(&device);
+        }
     } else {
-        server->serial = sc_server_read_serial(server);
-        if (!server->serial) {
-            LOGD("Could not get device serial");
+        ok = sc_server_configure_tcpip_known_address(server, params->tcpip_dst);
+        if (!ok) {
             goto error_connection_failed;
         }
     }
@@ -716,7 +742,7 @@ run_server(void *data) {
     assert(serial);
     LOGD("Device serial: %s", serial);
 
-    bool ok = push_server(&server->intr, serial);
+    ok = push_server(&server->intr, serial);
     if (!ok) {
         goto error_connection_failed;
     }

app/src/server.h

@@ -44,6 +44,9 @@ struct sc_server_params {
     bool downsize_on_error;
     bool tcpip;
     const char *tcpip_dst;
+    bool select_usb;
+    bool select_tcpip;
+    bool cleanup;
 };
 
 struct sc_server {

app/src/sys/unix/process.c

@@ -176,7 +176,7 @@ sc_process_execute_p(const char *const argv[], sc_pid *pid, unsigned flags,
 bool
 sc_process_terminate(pid_t pid) {
     if (pid <= 0) {
-        LOGC("Requested to kill %d, this is an error. Please report the bug.\n",
+        LOGE("Requested to kill %d, this is an error. Please report the bug.\n",
              (int) pid);
         abort();
     }

app/src/usb/aoa_hid.c

@@ -95,6 +95,7 @@ sc_aoa_register_hid(struct sc_aoa *aoa, uint16_t accessory_id,
                                          DEFAULT_TIMEOUT);
     if (result < 0) {
         LOGE("REGISTER_HID: libusb error: %s", libusb_strerror(result));
+        sc_usb_check_disconnected(aoa->usb, result);
         return false;
     }
 
@@ -131,6 +132,7 @@ sc_aoa_set_hid_report_desc(struct sc_aoa *aoa, uint16_t accessory_id,
                                          DEFAULT_TIMEOUT);
     if (result < 0) {
         LOGE("SET_HID_REPORT_DESC: libusb error: %s", libusb_strerror(result));
+        sc_usb_check_disconnected(aoa->usb, result);
         return false;
     }
 
@@ -173,6 +175,7 @@ sc_aoa_send_hid_event(struct sc_aoa *aoa, const struct sc_hid_event *event) {
                                          DEFAULT_TIMEOUT);
     if (result < 0) {
         LOGE("SEND_HID_EVENT: libusb error: %s", libusb_strerror(result));
+        sc_usb_check_disconnected(aoa->usb, result);
         return false;
     }
 
@@ -195,6 +198,7 @@ sc_aoa_unregister_hid(struct sc_aoa *aoa, const uint16_t accessory_id) {
                                          DEFAULT_TIMEOUT);
     if (result < 0) {
         LOGE("UNREGISTER_HID: libusb error: %s", libusb_strerror(result));
+        sc_usb_check_disconnected(aoa->usb, result);
         return false;
     }
 
@@ -278,7 +282,7 @@ sc_aoa_start(struct sc_aoa *aoa) {
 
     bool ok = sc_thread_create(&aoa->thread, run_aoa_thread, "scrcpy-aoa", aoa);
     if (!ok) {
-        LOGC("Could not start AOA thread");
+        LOGE("Could not start AOA thread");
         return false;
     }
 

app/src/usb/scrcpy_otg.c

@@ -2,6 +2,7 @@
 
 #include <SDL2/SDL.h>
 
+#include "adb/adb.h"
 #include "events.h"
 #include "screen_otg.h"
 #include "util/log.h"
@@ -56,7 +57,7 @@ scrcpy_otg(struct scrcpy_options *options) {
 
     // Minimal SDL initialization
     if (SDL_Init(SDL_INIT_EVENTS)) {
-        LOGC("Could not initialize SDL: %s", SDL_GetError());
+        LOGE("Could not initialize SDL: %s", SDL_GetError());
         return false;
     }
 
@@ -75,6 +76,15 @@ scrcpy_otg(struct scrcpy_options *options) {
     bool aoa_started = false;
     bool aoa_initialized = false;
 
+#ifdef _WIN32
+    // On Windows, only one process could open a USB device
+    // <https://github.com/Genymobile/scrcpy/issues/2773>
+    LOGI("Killing adb daemon (if any)...");
+    unsigned flags = SC_ADB_NO_STDOUT | SC_ADB_NO_STDERR | SC_ADB_NO_LOGERR;
+    // uninterruptible (intr == NULL), but in practice it's very quick
+    sc_adb_kill_server(NULL, flags);
+#endif
+
     static const struct sc_usb_callbacks cbs = {
         .on_disconnected = sc_usb_on_disconnected,
     };
@@ -83,50 +93,19 @@ scrcpy_otg(struct scrcpy_options *options) {
         return false;
     }
 
-    struct sc_usb_device usb_devices[16];
-    ssize_t count = sc_usb_find_devices(&s->usb, serial, usb_devices,
-                                        ARRAY_LEN(usb_devices));
-    if (count < 0) {
-        LOGE("Could not list USB devices");
+    struct sc_usb_device usb_device;
+    ok = sc_usb_select_device(&s->usb, serial, &usb_device);
+    if (!ok) {
         goto end;
     }
 
-    if (count == 0) {
-        if (serial) {
-            LOGE("Could not find USB device %s", serial);
-        } else {
-            LOGE("Could not find any USB device");
-        }
-        goto end;
-    }
-
-    if (count > 1) {
-        if (serial) {
-            LOGE("Multiple (%d) USB devices with serial %s:", (int) count,
-                 serial);
-        } else {
-            LOGE("Multiple (%d) USB devices:", (int) count);
-        }
-        for (size_t i = 0; i < (size_t) count; ++i) {
-            struct sc_usb_device *d = &usb_devices[i];
-            LOGE("    %-18s (%04" PRIx16 ":%04" PRIx16 ")  %s %s",
-                 d->serial, d->vid, d->pid, d->manufacturer, d->product);
-        }
-        if (!serial) {
-            LOGE("Specify the device via -s or --serial");
-        }
-        sc_usb_device_destroy_all(usb_devices, count);
-        goto end;
-    }
     usb_device_initialized = true;
 
-    struct sc_usb_device *usb_device = &usb_devices[0];
+    LOGI("USB device: %s (%04x:%04x) %s %s", usb_device.serial,
+         (unsigned) usb_device.vid, (unsigned) usb_device.pid,
+         usb_device.manufacturer, usb_device.product);
 
-    LOGI("USB device: %s (%04" PRIx16 ":%04" PRIx16 ") %s %s",
-         usb_device->serial, usb_device->vid, usb_device->pid,
-         usb_device->manufacturer, usb_device->product);
-
-    ok = sc_usb_connect(&s->usb, usb_device->device, &cbs, NULL);
+    ok = sc_usb_connect(&s->usb, usb_device.device, &cbs, NULL);
     if (!ok) {
         goto end;
     }
@@ -173,7 +152,7 @@ scrcpy_otg(struct scrcpy_options *options) {
 
     const char *window_title = options->window_title;
     if (!window_title) {
-        window_title = usb_device->product ? usb_device->product : "scrcpy";
+        window_title = usb_device.product ? usb_device.product : "scrcpy";
     }
 
     struct sc_screen_otg_params params = {
@@ -192,7 +171,7 @@ scrcpy_otg(struct scrcpy_options *options) {
     }
 
     // usb_device not needed anymore
-    sc_usb_device_destroy(usb_device);
+    sc_usb_device_destroy(&usb_device);
     usb_device_initialized = false;
 
     ret = event_loop(s);
@@ -223,7 +202,7 @@ end:
     }
 
     if (usb_device_initialized) {
-        sc_usb_device_destroy(usb_device);
+        sc_usb_device_destroy(&usb_device);
     }
 
     sc_usb_destroy(&s->usb);

app/src/usb/screen_otg.c

@@ -5,15 +5,44 @@
 #include "util/log.h"
 
 static void
-sc_screen_otg_capture_mouse(struct sc_screen_otg *screen, bool capture) {
-    assert(screen->mouse);
+sc_screen_otg_set_mouse_capture(struct sc_screen_otg *screen, bool capture) {
+#ifdef __APPLE__
+    // Workaround for SDL bug on macOS:
+    // <https://github.com/libsdl-org/SDL/issues/5340>
+    if (capture) {
+        int mouse_x, mouse_y;
+        SDL_GetGlobalMouseState(&mouse_x, &mouse_y);
+
+        int x, y, w, h;
+        SDL_GetWindowPosition(screen->window, &x, &y);
+        SDL_GetWindowSize(screen->window, &w, &h);
+
+        bool outside_window = mouse_x < x || mouse_x >= x + w
+                           || mouse_y < y || mouse_y >= y + h;
+        if (outside_window) {
+            SDL_WarpMouseInWindow(screen->window, w / 2, h / 2);
+        }
+    }
+#else
+    (void) screen;
+#endif
     if (SDL_SetRelativeMouseMode(capture)) {
         LOGE("Could not set relative mouse mode to %s: %s",
              capture ? "true" : "false", SDL_GetError());
-        return;
     }
+}
 
-    screen->mouse_captured = capture;
+static inline bool
+sc_screen_otg_get_mouse_capture(struct sc_screen_otg *screen) {
+    (void) screen;
+    return SDL_GetRelativeMouseMode();
+}
+
+static inline void
+sc_screen_otg_toggle_mouse_capture(struct sc_screen_otg *screen) {
+    (void) screen;
+    bool new_value = !sc_screen_otg_get_mouse_capture(screen);
+    sc_screen_otg_set_mouse_capture(screen, new_value);
 }
 
 static void
@@ -31,7 +60,6 @@ sc_screen_otg_init(struct sc_screen_otg *screen,
     screen->keyboard = params->keyboard;
     screen->mouse = params->mouse;
 
-    screen->mouse_captured = false;
     screen->mouse_capture_key_pressed = 0;
 
     const char *title = params->window_title;
@@ -81,7 +109,7 @@ sc_screen_otg_init(struct sc_screen_otg *screen,
 
     if (screen->mouse) {
         // Capture mouse on start
-        sc_screen_otg_capture_mouse(screen, true);
+        sc_screen_otg_set_mouse_capture(screen, true);
     }
 
     return true;
@@ -193,7 +221,7 @@ sc_screen_otg_handle_event(struct sc_screen_otg *screen, SDL_Event *event) {
                     break;
                 case SDL_WINDOWEVENT_FOCUS_LOST:
                     if (screen->mouse) {
-                        sc_screen_otg_capture_mouse(screen, false);
+                        sc_screen_otg_set_mouse_capture(screen, false);
                     }
                     break;
             }
@@ -227,8 +255,7 @@ sc_screen_otg_handle_event(struct sc_screen_otg *screen, SDL_Event *event) {
                     if (key == cap) {
                         // A mouse capture key has been pressed then released:
                         // toggle the capture mouse mode
-                        sc_screen_otg_capture_mouse(screen,
-                                                    !screen->mouse_captured);
+                        sc_screen_otg_toggle_mouse_capture(screen);
                     }
                     // Mouse capture keys are never forwarded to the device
                     return;
@@ -240,26 +267,26 @@ sc_screen_otg_handle_event(struct sc_screen_otg *screen, SDL_Event *event) {
             }
             break;
         case SDL_MOUSEMOTION:
-            if (screen->mouse && screen->mouse_captured) {
+            if (screen->mouse && sc_screen_otg_get_mouse_capture(screen)) {
                 sc_screen_otg_process_mouse_motion(screen, &event->motion);
             }
             break;
         case SDL_MOUSEBUTTONDOWN:
-            if (screen->mouse && screen->mouse_captured) {
+            if (screen->mouse && sc_screen_otg_get_mouse_capture(screen)) {
                 sc_screen_otg_process_mouse_button(screen, &event->button);
             }
             break;
         case SDL_MOUSEBUTTONUP:
             if (screen->mouse) {
-                if (screen->mouse_captured) {
+                if (sc_screen_otg_get_mouse_capture(screen)) {
                     sc_screen_otg_process_mouse_button(screen, &event->button);
                 } else {
-                    sc_screen_otg_capture_mouse(screen, true);
+                    sc_screen_otg_set_mouse_capture(screen, true);
                 }
             }
             break;
         case SDL_MOUSEWHEEL:
-            if (screen->mouse && screen->mouse_captured) {
+            if (screen->mouse && sc_screen_otg_get_mouse_capture(screen)) {
                 sc_screen_otg_process_mouse_wheel(screen, &event->wheel);
             }
             break;

app/src/usb/screen_otg.h

@@ -18,7 +18,6 @@ struct sc_screen_otg {
     SDL_Texture *texture;
 
     // See equivalent mechanism in screen.h
-    bool mouse_captured;
     SDL_Keycode mouse_capture_key_pressed;
 };
 

app/src/usb/usb.c

@@ -3,6 +3,9 @@
 #include <assert.h>
 
 #include "util/log.h"
+#include "util/vector.h"
+
+struct sc_vec_usb_devices SC_VECTOR(struct sc_usb_device);
 
 static char *
 read_string(libusb_device_handle *handle, uint8_t desc_index) {
@@ -25,8 +28,7 @@ read_string(libusb_device_handle *handle, uint8_t desc_index) {
 }
 
 static bool
-accept_device(libusb_device *device, const char *serial,
-              struct sc_usb_device *out) {
+sc_usb_read_device(libusb_device *device, struct sc_usb_device *out) {
     // Do not log any USB error in this function, it is expected that many USB
     // devices available on the computer have permission restrictions
 
@@ -39,6 +41,11 @@ accept_device(libusb_device *device, const char *serial,
     libusb_device_handle *handle;
     result = libusb_open(device, &handle);
     if (result < 0) {
+        // Log at debug level because it is expected that some non-Android USB
+        // devices present on the computer require special permissions
+        LOGD("Open USB device %04x:%04x: libusb error: %s",
+             (unsigned) desc.idVendor, (unsigned) desc.idProduct,
+             libusb_strerror(result));
         return false;
     }
 
@@ -48,22 +55,13 @@ accept_device(libusb_device *device, const char *serial,
         return false;
     }
 
-    if (serial) {
-        // Filter by serial
-        bool matches = !strcmp(serial, device_serial);
-        if (!matches) {
-            free(device_serial);
-            libusb_close(handle);
-            return false;
-        }
-    }
-
     out->device = libusb_ref_device(device);
     out->serial = device_serial;
     out->vid = desc.idVendor;
     out->pid = desc.idProduct;
     out->manufacturer = read_string(handle, desc.iManufacturer);
     out->product = read_string(handle, desc.iProduct);
+    out->selected = false;
 
     libusb_close(handle);
 
@@ -72,40 +70,150 @@ accept_device(libusb_device *device, const char *serial,
 
 void
 sc_usb_device_destroy(struct sc_usb_device *usb_device) {
-    libusb_unref_device(usb_device->device);
+    if (usb_device->device) {
+        libusb_unref_device(usb_device->device);
+    }
     free(usb_device->serial);
     free(usb_device->manufacturer);
     free(usb_device->product);
 }
 
 void
-sc_usb_device_destroy_all(struct sc_usb_device *usb_devices, size_t count) {
-    for (size_t i = 0; i < count; ++i) {
-        sc_usb_device_destroy(&usb_devices[i]);
-    }
+sc_usb_device_move(struct sc_usb_device *dst, struct sc_usb_device *src) {
+    *dst = *src;
+    src->device = NULL;
+    src->serial = NULL;
+    src->manufacturer = NULL;
+    src->product = NULL;
 }
 
-ssize_t
-sc_usb_find_devices(struct sc_usb *usb, const char *serial,
-                    struct sc_usb_device *devices, size_t len) {
+void
+sc_usb_devices_destroy(struct sc_vec_usb_devices *usb_devices) {
+    for (size_t i = 0; i < usb_devices->size; ++i) {
+        sc_usb_device_destroy(&usb_devices->data[i]);
+    }
+    sc_vector_destroy(usb_devices);
+}
+
+static bool
+sc_usb_list_devices(struct sc_usb *usb, struct sc_vec_usb_devices *out_vec) {
     libusb_device **list;
     ssize_t count = libusb_get_device_list(usb->context, &list);
     if (count < 0) {
         LOGE("List USB devices: libusb error: %s", libusb_strerror(count));
-        return -1;
+        return false;
     }
 
-    size_t idx = 0;
-    for (size_t i = 0; i < (size_t) count && idx < len; ++i) {
+    for (size_t i = 0; i < (size_t) count; ++i) {
         libusb_device *device = list[i];
 
-        if (accept_device(device, serial, &devices[idx])) {
-            ++idx;
+        struct sc_usb_device usb_device;
+        if (sc_usb_read_device(device, &usb_device)) {
+            bool ok = sc_vector_push(out_vec, usb_device);
+            if (!ok) {
+                LOG_OOM();
+                LOGE("Could not push usb_device to vector");
+                sc_usb_device_destroy(&usb_device);
+                // continue anyway
+            }
         }
     }
 
     libusb_free_device_list(list, 1);
-    return idx;
+    return true;
+}
+
+static bool
+sc_usb_accept_device(const struct sc_usb_device *device, const char *serial) {
+    if (!serial) {
+        return true;
+    }
+
+    return !strcmp(serial, device->serial);
+}
+
+static size_t
+sc_usb_devices_select(struct sc_usb_device *devices, size_t len,
+                      const char *serial, size_t *idx_out) {
+    size_t count = 0;
+    for (size_t i = 0; i < len; ++i) {
+        struct sc_usb_device *device = &devices[i];
+        device->selected = sc_usb_accept_device(device, serial);
+        if (device->selected) {
+            if (idx_out && !count) {
+                *idx_out = i;
+            }
+            ++count;
+        }
+    }
+
+    return count;
+}
+
+static void
+sc_usb_devices_log(enum sc_log_level level, struct sc_usb_device *devices,
+                   size_t count) {
+    for (size_t i = 0; i < count; ++i) {
+        struct sc_usb_device *d = &devices[i];
+        const char *selection = d->selected ? "-->" : "   ";
+        // Convert uint16_t to unsigned because PRIx16 may not exist on Windows
+        LOG(level, "    %s %-18s (%04x:%04x)  %s %s",
+            selection, d->serial, (unsigned) d->vid, (unsigned) d->pid,
+            d->manufacturer, d->product);
+    }
+}
+
+bool
+sc_usb_select_device(struct sc_usb *usb, const char *serial,
+                     struct sc_usb_device *out_device) {
+    struct sc_vec_usb_devices vec = SC_VECTOR_INITIALIZER;
+    bool ok = sc_usb_list_devices(usb, &vec);
+    if (!ok) {
+        LOGE("Could not list USB devices");
+        return false;
+    }
+
+    if (vec.size == 0) {
+        LOGE("Could not find any USB device");
+        return false;
+    }
+
+    size_t sel_idx; // index of the single matching device if sel_count == 1
+    size_t sel_count =
+        sc_usb_devices_select(vec.data, vec.size, serial, &sel_idx);
+
+    if (sel_count == 0) {
+        // if count > 0 && sel_count == 0, then necessarily a serial is provided
+        assert(serial);
+        LOGE("Could not find USB device %s", serial);
+        sc_usb_devices_log(SC_LOG_LEVEL_ERROR, vec.data, vec.size);
+        sc_usb_devices_destroy(&vec);
+        return false;
+    }
+
+    if (sel_count > 1) {
+        if (serial) {
+            LOGE("Multiple (%" SC_PRIsizet ") USB devices with serial %s:",
+                 sel_count, serial);
+        } else {
+            LOGE("Multiple (%" SC_PRIsizet ") USB devices:", sel_count);
+        }
+        sc_usb_devices_log(SC_LOG_LEVEL_ERROR, vec.data, vec.size);
+        LOGE("Select a device via -s (--serial)");
+        sc_usb_devices_destroy(&vec);
+        return false;
+    }
+
+    assert(sel_count == 1); // sel_idx is valid only if sel_count == 1
+    struct sc_usb_device *device = &vec.data[sel_idx];
+
+    LOGD("USB device found:");
+    sc_usb_devices_log(SC_LOG_LEVEL_DEBUG, vec.data, vec.size);
+
+    // Move device into out_device (do not destroy device)
+    sc_usb_device_move(out_device, device);
+    sc_usb_devices_destroy(&vec);
+    return true;
 }
 
 bool
@@ -119,7 +227,25 @@ sc_usb_destroy(struct sc_usb *usb) {
     libusb_exit(usb->context);
 }
 
-static int
+static void
+sc_usb_report_disconnected(struct sc_usb *usb) {
+    if (usb->cbs && !atomic_flag_test_and_set(&usb->disconnection_notified)) {
+        assert(usb->cbs && usb->cbs->on_disconnected);
+        usb->cbs->on_disconnected(usb, usb->cbs_userdata);
+    }
+}
+
+bool
+sc_usb_check_disconnected(struct sc_usb *usb, int result) {
+    if (result == LIBUSB_ERROR_NO_DEVICE || result == LIBUSB_ERROR_NOT_FOUND) {
+        sc_usb_report_disconnected(usb);
+        return false;
+    }
+
+    return true;
+}
+
+static LIBUSB_CALL int
 sc_usb_libusb_callback(libusb_context *ctx, libusb_device *device,
                        libusb_hotplug_event event, void *userdata) {
     (void) ctx;
@@ -135,8 +261,7 @@ sc_usb_libusb_callback(libusb_context *ctx, libusb_device *device,
         return 0;
     }
 
-    assert(usb->cbs && usb->cbs->on_disconnected);
-    usb->cbs->on_disconnected(usb, usb->cbs_userdata);
+    sc_usb_report_disconnected(usb);
 
     // Do not automatically deregister the callback by returning 1. Instead,
     // manually deregister to interrupt libusb_handle_events() from the libusb
@@ -157,7 +282,8 @@ run_libusb_event_handler(void *data) {
 static bool
 sc_usb_register_callback(struct sc_usb *usb) {
     if (!libusb_has_capability(LIBUSB_CAP_HAS_HOTPLUG)) {
-        LOGW("libusb does not have hotplug capability");
+        LOGW("On this platform, libusb does not have hotplug capability; "
+             "device disconnection will not be detected properly");
         return false;
     }
 
@@ -209,6 +335,7 @@ sc_usb_connect(struct sc_usb *usb, libusb_device *device,
 
     if (cbs) {
         atomic_init(&usb->stopped, false);
+        usb->disconnection_notified = (atomic_flag) ATOMIC_FLAG_INIT;
         if (sc_usb_register_callback(usb)) {
             // Create a thread to process libusb events, so that device
             // disconnection could be detected immediately
@@ -219,8 +346,6 @@ sc_usb_connect(struct sc_usb *usb, libusb_device *device,
                 LOGW("Libusb event thread handler could not be created, USB "
                      "device disconnection might not be detected immediately");
             }
-        } else {
-            LOGW("Could not register USB device disconnection callback");
         }
     }
 

app/src/usb/usb.h

@@ -22,6 +22,7 @@ struct sc_usb {
     sc_thread libusb_event_thread;
 
     atomic_bool stopped; // only used if cbs != NULL
+    atomic_flag disconnection_notified;
 };
 
 struct sc_usb_callbacks {
@@ -35,13 +36,26 @@ struct sc_usb_device {
     char *product;
     uint16_t vid;
     uint16_t pid;
+    bool selected;
 };
 
 void
 sc_usb_device_destroy(struct sc_usb_device *usb_device);
 
+/**
+ * Move src to dst
+ *
+ * After this call, the content of src is undefined, except that
+ * sc_usb_device_destroy() can be called.
+ *
+ * This is useful to take a device from a list that will be destroyed, without
+ * making unnecessary copies.
+ */
 void
-sc_usb_device_destroy_all(struct sc_usb_device *usb_devices, size_t count);
+sc_usb_device_move(struct sc_usb_device *dst, struct sc_usb_device *src);
+
+void
+sc_usb_devices_destroy_all(struct sc_usb_device *usb_devices, size_t count);
 
 bool
 sc_usb_init(struct sc_usb *usb);
@@ -49,9 +63,9 @@ sc_usb_init(struct sc_usb *usb);
 void
 sc_usb_destroy(struct sc_usb *usb);
 
-ssize_t
-sc_usb_find_devices(struct sc_usb *usb, const char *serial,
-                    struct sc_usb_device *devices, size_t len);
+bool
+sc_usb_select_device(struct sc_usb *usb, const char *serial,
+                     struct sc_usb_device *out_device);
 
 bool
 sc_usb_connect(struct sc_usb *usb, libusb_device *device,
@@ -60,6 +74,11 @@ sc_usb_connect(struct sc_usb *usb, libusb_device *device,
 void
 sc_usb_disconnect(struct sc_usb *usb);
 
+// A client should call this function with the return value of a libusb call
+// to detect disconnection immediately
+bool
+sc_usb_check_disconnected(struct sc_usb *usb, int result);
+
 void
 sc_usb_stop(struct sc_usb *usb);
 

app/src/util/buffer_util.h

@@ -1,5 +1,5 @@
-#ifndef BUFFER_UTIL_H
-#define BUFFER_UTIL_H
+#ifndef SC_BUFFER_UTIL_H
+#define SC_BUFFER_UTIL_H
 
 #include "common.h"
 
@@ -7,13 +7,13 @@
 #include <stdint.h>
 
 static inline void
-buffer_write16be(uint8_t *buf, uint16_t value) {
+sc_write16be(uint8_t *buf, uint16_t value) {
     buf[0] = value >> 8;
     buf[1] = value;
 }
 
 static inline void
-buffer_write32be(uint8_t *buf, uint32_t value) {
+sc_write32be(uint8_t *buf, uint32_t value) {
     buf[0] = value >> 24;
     buf[1] = value >> 16;
     buf[2] = value >> 8;
@@ -21,25 +21,25 @@ buffer_write32be(uint8_t *buf, uint32_t value) {
 }
 
 static inline void
-buffer_write64be(uint8_t *buf, uint64_t value) {
-    buffer_write32be(buf, value >> 32);
-    buffer_write32be(&buf[4], (uint32_t) value);
+sc_write64be(uint8_t *buf, uint64_t value) {
+    sc_write32be(buf, value >> 32);
+    sc_write32be(&buf[4], (uint32_t) value);
 }
 
 static inline uint16_t
-buffer_read16be(const uint8_t *buf) {
+sc_read16be(const uint8_t *buf) {
     return (buf[0] << 8) | buf[1];
 }
 
 static inline uint32_t
-buffer_read32be(const uint8_t *buf) {
+sc_read32be(const uint8_t *buf) {
     return ((uint32_t) buf[0] << 24) | (buf[1] << 16) | (buf[2] << 8) | buf[3];
 }
 
 static inline uint64_t
-buffer_read64be(const uint8_t *buf) {
-    uint32_t msb = buffer_read32be(buf);
-    uint32_t lsb = buffer_read32be(&buf[4]);
+sc_read64be(const uint8_t *buf) {
+    uint32_t msb = sc_read32be(buf);
+    uint32_t lsb = sc_read32be(&buf[4]);
     return ((uint64_t) msb << 32) | lsb;
 }
 

app/src/util/log.c

@@ -55,6 +55,16 @@ sc_get_log_level(void) {
     return log_level_sdl_to_sc(sdl_log);
 }
 
+void
+sc_log(enum sc_log_level level, const char *fmt, ...) {
+    SDL_LogPriority sdl_level = log_level_sc_to_sdl(level);
+
+    va_list ap;
+    va_start(ap, fmt);
+    SDL_LogMessageV(SDL_LOG_CATEGORY_APPLICATION, sdl_level, fmt, ap);
+    va_end(ap);
+}
+
 #ifdef _WIN32
 bool
 sc_log_windows_error(const char *prefix, int error) {

app/src/util/log.h

@@ -15,10 +15,9 @@
 #define LOGI(...) SDL_LogInfo(SDL_LOG_CATEGORY_APPLICATION, __VA_ARGS__)
 #define LOGW(...) SDL_LogWarn(SDL_LOG_CATEGORY_APPLICATION, __VA_ARGS__)
 #define LOGE(...) SDL_LogError(SDL_LOG_CATEGORY_APPLICATION, __VA_ARGS__)
-#define LOGC(...) SDL_LogCritical(SDL_LOG_CATEGORY_APPLICATION, __VA_ARGS__)
 
 #define LOG_OOM() \
-    LOGC("OOM: %s:%d %s()", __FILE__, __LINE__, __func__)
+    LOGE("OOM: %s:%d %s()", __FILE__, __LINE__, __func__)
 
 void
 sc_set_log_level(enum sc_log_level level);
@@ -26,6 +25,10 @@ sc_set_log_level(enum sc_log_level level);
 enum sc_log_level
 sc_get_log_level(void);
 
+void
+sc_log(enum sc_log_level level, const char *fmt, ...);
+#define LOG(LEVEL, ...) sc_log((LEVEL), __VA_ARGS__)
+
 #ifdef _WIN32
 // Log system error (typically returned by GetLastError() or similar)
 bool

app/src/util/net.c

@@ -33,7 +33,7 @@ net_init(void) {
     WSADATA wsa;
     int res = WSAStartup(MAKEWORD(2, 2), &wsa) < 0;
     if (res < 0) {
-        LOGC("WSAStartup failed with error %d", res);
+        LOGE("WSAStartup failed with error %d", res);
         return false;
     }
 #endif

app/src/util/process.h

@@ -12,8 +12,6 @@
 # include <winsock2.h>
 # include <windows.h>
 # define SC_PRIexitcode "lu"
-// <https://stackoverflow.com/a/44383330/1987178>
-# define SC_PRIsizet "Iu"
 # define SC_PROCESS_NONE NULL
 # define SC_EXIT_CODE_NONE -1UL // max value as unsigned long
   typedef HANDLE sc_pid;
@@ -23,7 +21,6 @@
 #else
 
 # include <sys/types.h>
-# define SC_PRIsizet "zu"
 # define SC_PRIexitcode "d"
 # define SC_PROCESS_NONE -1
 # define SC_EXIT_CODE_NONE -1

app/src/util/process_intr.c

@@ -3,27 +3,33 @@
 ssize_t
 sc_pipe_read_intr(struct sc_intr *intr, sc_pid pid, sc_pipe pipe, char *data,
                   size_t len) {
-    if (!sc_intr_set_process(intr, pid)) {
+    if (intr && !sc_intr_set_process(intr, pid)) {
         // Already interrupted
         return false;
     }
 
     ssize_t ret = sc_pipe_read(pipe, data, len);
 
-    sc_intr_set_process(intr, SC_PROCESS_NONE);
+    if (intr) {
+        sc_intr_set_process(intr, SC_PROCESS_NONE);
+    }
+
     return ret;
 }
 
 ssize_t
 sc_pipe_read_all_intr(struct sc_intr *intr, sc_pid pid, sc_pipe pipe,
                       char *data, size_t len) {
-    if (!sc_intr_set_process(intr, pid)) {
+    if (intr && !sc_intr_set_process(intr, pid)) {
         // Already interrupted
         return false;
     }
 
     ssize_t ret = sc_pipe_read_all(pipe, data, len);
 
-    sc_intr_set_process(intr, SC_PROCESS_NONE);
+    if (intr) {
+        sc_intr_set_process(intr, SC_PROCESS_NONE);
+    }
+
     return ret;
 }

app/src/util/thread.c

@@ -54,7 +54,7 @@ sc_mutex_lock(sc_mutex *mutex) {
     int r = SDL_LockMutex(mutex->mutex);
 #ifndef NDEBUG
     if (r) {
-        LOGC("Could not lock mutex: %s", SDL_GetError());
+        LOGE("Could not lock mutex: %s", SDL_GetError());
         abort();
     }
 
@@ -74,7 +74,7 @@ sc_mutex_unlock(sc_mutex *mutex) {
     int r = SDL_UnlockMutex(mutex->mutex);
 #ifndef NDEBUG
     if (r) {
-        LOGC("Could not lock mutex: %s", SDL_GetError());
+        LOGE("Could not lock mutex: %s", SDL_GetError());
         abort();
     }
 #else
@@ -118,7 +118,7 @@ sc_cond_wait(sc_cond *cond, sc_mutex *mutex) {
     int r = SDL_CondWait(cond->cond, mutex->mutex);
 #ifndef NDEBUG
     if (r) {
-        LOGC("Could not wait on condition: %s", SDL_GetError());
+        LOGE("Could not wait on condition: %s", SDL_GetError());
         abort();
     }
 
@@ -136,11 +136,13 @@ sc_cond_timedwait(sc_cond *cond, sc_mutex *mutex, sc_tick deadline) {
         return false; // timeout
     }
 
-    uint32_t ms = SC_TICK_TO_MS(deadline - now);
+    // Round up to the next millisecond to guarantee that the deadline is
+    // reached when returning due to timeout
+    uint32_t ms = SC_TICK_TO_MS(deadline - now + SC_TICK_FROM_MS(1) - 1);
     int r = SDL_CondWaitTimeout(cond->cond, mutex->mutex, ms);
 #ifndef NDEBUG
     if (r < 0) {
-        LOGC("Could not wait on condition with timeout: %s", SDL_GetError());
+        LOGE("Could not wait on condition with timeout: %s", SDL_GetError());
         abort();
     }
 
@@ -148,6 +150,8 @@ sc_cond_timedwait(sc_cond *cond, sc_mutex *mutex, sc_tick deadline) {
                           memory_order_relaxed);
 #endif
     assert(r == 0 || r == SDL_MUTEX_TIMEDOUT);
+    // The deadline is reached on timeout
+    assert(r != SDL_MUTEX_TIMEDOUT || sc_tick_now() >= deadline);
     return r == 0;
 }
 
@@ -156,7 +160,7 @@ sc_cond_signal(sc_cond *cond) {
     int r = SDL_CondSignal(cond->cond);
 #ifndef NDEBUG
     if (r) {
-        LOGC("Could not signal a condition: %s", SDL_GetError());
+        LOGE("Could not signal a condition: %s", SDL_GetError());
         abort();
     }
 #else
@@ -169,7 +173,7 @@ sc_cond_broadcast(sc_cond *cond) {
     int r = SDL_CondBroadcast(cond->cond);
 #ifndef NDEBUG
     if (r) {
-        LOGC("Could not broadcast a condition: %s", SDL_GetError());
+        LOGE("Could not broadcast a condition: %s", SDL_GetError());
         abort();
     }
 #else

app/src/util/vector.h

@@ -0,0 +1,539 @@
+#ifndef SC_VECTOR_H
+#define SC_VECTOR_H
+
+#include "common.h"
+
+#include <stdbool.h>
+#include <stddef.h>
+
+// Adapted from vlc_vector:
+// <https://code.videolan.org/videolan/vlc/-/blob/0857947abaed9c89810cd96353aaa1b7e6ba3b0d/include/vlc_vector.h>
+
+/**
+ * Vector struct body
+ *
+ * A vector is a dynamic array, managed by the sc_vector_* helpers.
+ *
+ * It is generic over the type of its items, so it is implemented as macros.
+ *
+ * To use a vector, a new type must be defined:
+ *
+ *     struct vec_int SC_VECTOR(int);
+ *
+ * The struct may be anonymous:
+ *
+ *     struct SC_VECTOR(const char *) names;
+ *
+ * Vector size is accessible via `vec.size`, and items are intended to be
+ * accessed directly, via `vec.data[i]`.
+ *
+ * Functions and macros having name ending with '_' are private.
+ */
+#define SC_VECTOR(type) \
+{ \
+    size_t cap; \
+    size_t size; \
+    type *data; \
+}
+
+/**
+ * Static initializer for a vector
+ */
+#define SC_VECTOR_INITIALIZER { 0, 0, NULL }
+
+/**
+ * Initialize an empty vector
+ */
+#define sc_vector_init(pv) \
+({ \
+    (pv)->cap = 0; \
+    (pv)->size = 0; \
+    (pv)->data = NULL; \
+})
+
+/**
+ * Destroy a vector
+ *
+ * The vector may not be used anymore unless sc_vector_init() is called.
+ */
+#define sc_vector_destroy(pv) \
+    free((pv)->data)
+
+/**
+ * Clear a vector
+ *
+ * Remove all items from the vector.
+ */
+#define sc_vector_clear(pv) \
+({ \
+    sc_vector_destroy(pv); \
+    sc_vector_init(pv);\
+})
+
+/**
+ * The minimal allocation size, in number of items
+ *
+ * Private.
+ */
+#define SC_VECTOR_MINCAP_ ((size_t) 10)
+
+static inline size_t
+sc_vector_min_(size_t a, size_t b)
+{
+    return a < b ? a : b;
+}
+
+static inline size_t
+sc_vector_max_(size_t a, size_t b)
+{
+    return a > b ? a : b;
+}
+
+static inline size_t
+sc_vector_clamp_(size_t x, size_t min, size_t max)
+{
+    return sc_vector_max_(min, sc_vector_min_(max, x));
+}
+
+/**
+ * Realloc data and update vector fields
+ *
+ * On reallocation success, update the vector capacity (*pcap) and size
+ * (*psize), and return the reallocated data.
+ *
+ * On reallocation failure, return NULL without any change.
+ *
+ * Private.
+ *
+ * \param ptr the current `data` field of the vector to realloc
+ * \param count the requested capacity, in number of items
+ * \param size the size of one item
+ * \param pcap a pointer to the `cap` field of the vector [IN/OUT]
+ * \param psize a pointer to the `size` field of the vector [IN/OUT]
+ * \return the new ptr on success, NULL on error
+ */
+static inline void *
+sc_vector_reallocdata_(void *ptr, size_t count, size_t size,
+                        size_t *restrict pcap, size_t *restrict psize)
+{
+    void *p = realloc(ptr, count * size);
+    if (!p) {
+        return NULL;
+    }
+
+    *pcap = count;
+    *psize = sc_vector_min_(*psize, count);
+    return p;
+}
+
+#define sc_vector_realloc_(pv, newcap) \
+({ \
+    void *p = sc_vector_reallocdata_((pv)->data, newcap, sizeof(*(pv)->data), \
+                                     &(pv)->cap, &(pv)->size); \
+    if (p) { \
+        (pv)->data = p; \
+    } \
+    (bool) p; \
+});
+
+#define sc_vector_resize_(pv, newcap) \
+({ \
+    bool ok; \
+    if ((pv)->cap == (newcap)) { \
+        ok = true; \
+    } else if ((newcap) > 0) { \
+        ok = sc_vector_realloc_(pv, (newcap)); \
+    } else { \
+        sc_vector_clear(pv); \
+        ok = true; \
+    } \
+    ok; \
+})
+
+static inline size_t
+sc_vector_growsize_(size_t value)
+{
+    /* integer multiplication by 1.5 */
+    return value + (value >> 1);
+}
+
+/* SIZE_MAX/2 to fit in ssize_t, and so that cap*1.5 does not overflow. */
+#define sc_vector_max_cap_(pv) (SIZE_MAX / 2 / sizeof(*(pv)->data))
+
+/**
+ * Increase the capacity of the vector to at least `mincap`
+ *
+ * \param pv a pointer to the vector
+ * \param mincap (size_t) the requested capacity
+ * \retval true if no allocation failed
+ * \retval false on allocation failure (the vector is left untouched)
+ */
+#define sc_vector_reserve(pv, mincap) \
+({ \
+    bool ok; \
+    /* avoid to allocate tiny arrays (< SC_VECTOR_MINCAP_) */ \
+    size_t mincap_ = sc_vector_max_(mincap, SC_VECTOR_MINCAP_); \
+    if (mincap_ <= (pv)->cap) { \
+        /* nothing to do */ \
+        ok = true; \
+    } else if (mincap_ <= sc_vector_max_cap_(pv)) { \
+        /* not too big */ \
+        size_t newsize = sc_vector_growsize_((pv)->cap); \
+        newsize = sc_vector_clamp_(newsize, mincap_, sc_vector_max_cap_(pv)); \
+        ok = sc_vector_realloc_(pv, newsize); \
+    } else { \
+        ok = false; \
+    } \
+    ok; \
+})
+
+#define sc_vector_shrink_to_fit(pv) \
+    /* decreasing the size may not fail */ \
+    (void) sc_vector_resize_(pv, (pv)->size)
+
+/**
+ * Resize the vector down automatically
+ *
+ * Shrink only when necessary (in practice when cap > (size+5)*1.5)
+ *
+ * \param pv a pointer to the vector
+ */
+#define sc_vector_autoshrink(pv) \
+({ \
+    bool must_shrink = \
+        /* do not shrink to tiny size */ \
+        (pv)->cap > SC_VECTOR_MINCAP_ && \
+        /* no need to shrink */ \
+        (pv)->cap >= sc_vector_growsize_((pv)->size + 5); \
+    if (must_shrink) { \
+        size_t newsize = sc_vector_max_((pv)->size + 5, SC_VECTOR_MINCAP_); \
+        sc_vector_resize_(pv, newsize); \
+    } \
+})
+
+#define sc_vector_check_same_ptr_type_(a, b) \
+    (void) ((a) == (b)) /* warn on type mismatch */
+
+/**
+ * Push an item at the end of the vector
+ *
+ * The amortized complexity is O(1).
+ *
+ * \param pv a pointer to the vector
+ * \param item the item to append
+ * \retval true if no allocation failed
+ * \retval false on allocation failure (the vector is left untouched)
+ */
+#define sc_vector_push(pv, item) \
+({ \
+    bool ok = sc_vector_reserve(pv, (pv)->size + 1); \
+    if (ok) { \
+        (pv)->data[(pv)->size++] = (item); \
+    } \
+    ok; \
+})
+
+/**
+ * Append `count` items at the end of the vector
+ *
+ * \param pv a pointer to the vector
+ * \param items the items array to append
+ * \param count the number of items in the array
+ * \retval true if no allocation failed
+ * \retval false on allocation failure (the vector is left untouched)
+ */
+#define sc_vector_push_all(pv, items, count) \
+    sc_vector_push_all_(pv, items, (size_t) count)
+
+#define sc_vector_push_all_(pv, items, count) \
+({ \
+    sc_vector_check_same_ptr_type_((pv)->data, items); \
+    bool ok = sc_vector_reserve(pv, (pv)->size + (count)); \
+    if (ok) { \
+        memcpy(&(pv)->data[(pv)->size], items, (count) * sizeof(*(pv)->data)); \
+        (pv)->size += count; \
+    } \
+    ok; \
+})
+
+/**
+ * Insert an hole of size `count` to the given index
+ *
+ * The items in range [index; size-1] will be moved. The items in the hole are
+ * left uninitialized.
+ *
+ * \param pv a pointer to the vector
+ * \param index the index where the hole is to be inserted
+ * \param count the number of items in the hole
+ * \retval true if no allocation failed
+ * \retval false on allocation failure (the vector is left untouched)
+ */
+#define sc_vector_insert_hole(pv, index, count) \
+    sc_vector_insert_hole_(pv, (size_t) index, (size_t) count);
+
+#define sc_vector_insert_hole_(pv, index, count) \
+({ \
+    bool ok = sc_vector_reserve(pv, (pv)->size + (count)); \
+    if (ok) { \
+        if ((index) < (pv)->size) { \
+            memmove(&(pv)->data[(index) + (count)], \
+                    &(pv)->data[(index)], \
+                    ((pv)->size - (index)) * sizeof(*(pv)->data)); \
+        } \
+        (pv)->size += count; \
+    } \
+    ok; \
+})
+
+/**
+ * Insert an item at the given index
+ *
+ * The items in range [index; size-1] will be moved.
+ *
+ * \param pv a pointer to the vector
+ * \param index the index where the item is to be inserted
+ * \param item the item to append
+ * \retval true if no allocation failed
+ * \retval false on allocation failure (the vector is left untouched)
+ */
+#define sc_vector_insert(pv, index, item) \
+    sc_vector_insert_(pv, (size_t) index, (size_t) item);
+
+#define sc_vector_insert_(pv, index, item) \
+({ \
+    bool ok = sc_vector_insert_hole_(pv, index, 1); \
+    if (ok) { \
+        (pv)->data[index] = (item); \
+    } \
+    ok; \
+})
+
+/**
+ * Insert `count` items at the given index
+ *
+ * The items in range [index; size-1] will be moved.
+ *
+ * \param pv a pointer to the vector
+ * \param index the index where the items are to be inserted
+ * \param items the items array to append
+ * \param count the number of items in the array
+ * \retval true if no allocation failed
+ * \retval false on allocation failure (the vector is left untouched)
+ */
+#define sc_vector_insert_all(pv, index, items, count) \
+    sc_vector_insert_all_(pv, (size_t) index, items, (size_t) count)
+
+#define sc_vector_insert_all_(pv, index, items, count) \
+({ \
+    sc_vector_check_same_ptr_type_((pv)->data, items); \
+    bool ok = sc_vector_insert_hole_(pv, index, count); \
+    if (ok) { \
+        memcpy(&(pv)->data[index], items, count * sizeof(*(pv)->data)); \
+    } \
+    ok; \
+})
+
+/** Reverse a char array in place */
+static inline void
+sc_char_array_reverse(char *array, size_t len)
+{
+    for (size_t i = 0; i < len / 2; ++i)
+    {
+        char c = array[i];
+        array[i] = array[len - i - 1];
+        array[len - i - 1] = c;
+    }
+}
+
+/**
+ * Right-rotate a (char) array in place
+ *
+ * For example, left-rotating a char array containing {1, 2, 3, 4, 5, 6} with
+ * distance 4 will result in {5, 6, 1, 2, 3, 4}.
+ *
+ * Private.
+ */
+static inline void
+sc_char_array_rotate_left(char *array, size_t len, size_t distance)
+{
+    sc_char_array_reverse(array, distance);
+    sc_char_array_reverse(&array[distance], len - distance);
+    sc_char_array_reverse(array, len);
+}
+
+/**
+ * Right-rotate a (char) array in place
+ *
+ * For example, left-rotating a char array containing {1, 2, 3, 4, 5, 6} with
+ * distance 2 will result in {5, 6, 1, 2, 3, 4}.
+ *
+ * Private.
+ */
+static inline void
+sc_char_array_rotate_right(char *array, size_t len, size_t distance)
+{
+    sc_char_array_rotate_left(array, len, len - distance);
+}
+
+/**
+ * Move items in a (char) array in place
+ *
+ * Move slice [index, count] to target.
+ */
+static inline void
+sc_char_array_move(char *array, size_t idx, size_t count, size_t target)
+{
+    if (idx < target) {
+        sc_char_array_rotate_left(&array[idx], target - idx + count, count);
+    } else {
+        sc_char_array_rotate_right(&array[target], idx - target + count, count);
+    }
+}
+
+/**
+ * Move a slice of items to a given target index
+ *
+ * The items in range [index; count] will be moved so that the *new* position
+ * of the first item is `target`.
+ *
+ * \param pv a pointer to the vector
+ * \param index the index of the first item to move
+ * \param count the number of items to move
+ * \param target the new index of the moved slice
+ */
+#define sc_vector_move_slice(pv, index, count, target) \
+    sc_vector_move_slice_(pv, (size_t) index, count, (size_t) target);
+
+#define sc_vector_move_slice_(pv, index, count, target) \
+({ \
+    sc_char_array_move((char *) (pv)->data, \
+                       (index) * sizeof(*(pv)->data), \
+                       (count) * sizeof(*(pv)->data), \
+                       (target) * sizeof(*(pv)->data)); \
+})
+
+/**
+ * Move an item to a given target index
+ *
+ * The items will be moved so that its *new* position is `target`.
+ *
+ * \param pv a pointer to the vector
+ * \param index the index of the item to move
+ * \param target the new index of the moved item
+ */
+#define sc_vector_move(pv, index, target) \
+    sc_vector_move_slice(pv, index, 1, target)
+
+/**
+ * Remove a slice of items, without shrinking the array
+ *
+ * If you have no good reason to use the _noshrink() version, use
+ * sc_vector_remove_slice() instead.
+ *
+ * The items in range [index+count; size-1] will be moved.
+ *
+ * \param pv a pointer to the vector
+ * \param index the index of the first item to remove
+ * \param count the number of items to remove
+ */
+#define sc_vector_remove_slice_noshrink(pv, index, count) \
+    sc_vector_remove_slice_noshrink_(pv, (size_t) index, (size_t) count)
+
+#define sc_vector_remove_slice_noshrink_(pv, index, count) \
+({ \
+    if ((index) + (count) < (pv)->size) { \
+        memmove(&(pv)->data[index], \
+                &(pv)->data[(index) + (count)], \
+                ((pv)->size - (index) - (count)) * sizeof(*(pv)->data)); \
+    } \
+    (pv)->size -= count; \
+})
+
+/**
+ * Remove a slice of items
+ *
+ * The items in range [index+count; size-1] will be moved.
+ *
+ * \param pv a pointer to the vector
+ * \param index the index of the first item to remove
+ * \param count the number of items to remove
+ */
+#define sc_vector_remove_slice(pv, index, count) \
+({ \
+    sc_vector_remove_slice_noshrink(pv, index, count); \
+    sc_vector_autoshrink(pv); \
+})
+
+/**
+ * Remove an item, without shrinking the array
+ *
+ * If you have no good reason to use the _noshrink() version, use
+ * sc_vector_remove() instead.
+ *
+ * The items in range [index+1; size-1] will be moved.
+ *
+ * \param pv a pointer to the vector
+ * \param index the index of item to remove
+ */
+#define sc_vector_remove_noshrink(pv, index) \
+    sc_vector_remove_slice_noshrink(pv, index, 1)
+
+/**
+ * Remove an item
+ *
+ * The items in range [index+1; size-1] will be moved.
+ *
+ * \param pv a pointer to the vector
+ * \param index the index of item to remove
+ */
+#define sc_vector_remove(pv, index) \
+({ \
+    sc_vector_remove_noshrink(pv, index); \
+    sc_vector_autoshrink(pv); \
+})
+
+/**
+ * Remove an item
+ *
+ * The removed item is replaced by the last item of the vector.
+ *
+ * This does not preserve ordering, but is O(1). This is useful when the order
+ * of items is not meaningful.
+ *
+ * \param pv a pointer to the vector
+ * \param index the index of item to remove
+ */
+#define sc_vector_swap_remove(pv, index) \
+    sc_vector_swap_remove_(pv, (size_t) index);
+
+#define sc_vector_swap_remove_(pv, index) \
+({ \
+    (pv)->data[index] = (pv)->data[(pv)->size-1]; \
+    (pv)->size--; \
+});
+
+/**
+ * Return the index of an item
+ *
+ * Iterate over all items to find a given item.
+ *
+ * Use only for vectors of primitive types or pointers.
+ *
+ * Return the index, or -1 if not found.
+ *
+ * \param pv a pointer to the vector
+ * \param item the item to find (compared with ==)
+ */
+#define sc_vector_index_of(pv, item) \
+({ \
+    ssize_t idx = -1; \
+    for (size_t i = 0; i < (pv)->size; ++i) { \
+        if ((pv)->data[i] == (item)) { \
+            idx = (ssize_t) i; \
+            break; \
+        } \
+    } \
+    idx; \
+})
+
+#endif

app/src/v4l2_sink.c

@@ -274,7 +274,7 @@ sc_v4l2_sink_open(struct sc_v4l2_sink *vs) {
     LOGD("Starting v4l2 thread");
     ok = sc_thread_create(&vs->thread, run_v4l2_sink, "scrcpy-v4l2", vs);
     if (!ok) {
-        LOGC("Could not start v4l2 thread");
+        LOGE("Could not start v4l2 thread");
         goto error_av_packet_free;
     }
 

app/src/version.c

@@ -0,0 +1,67 @@
+#include "version.h"
+
+#include <libavcodec/avcodec.h>
+#include <libavformat/avformat.h>
+#include <libavutil/avutil.h>
+#ifdef HAVE_V4L2
+# include <libavdevice/avdevice.h>
+#endif
+#ifdef HAVE_USB
+# include <libusb-1.0/libusb.h>
+#endif
+
+void
+scrcpy_print_version(void) {
+    printf("\nDependencies (compiled / linked):\n");
+
+    SDL_version sdl;
+    SDL_GetVersion(&sdl);
+    printf(" - SDL: %u.%u.%u / %u.%u.%u\n",
+           SDL_MAJOR_VERSION, SDL_MINOR_VERSION, SDL_PATCHLEVEL,
+           (unsigned) sdl.major, (unsigned) sdl.minor, (unsigned) sdl.patch);
+
+    unsigned avcodec = avcodec_version();
+    printf(" - libavcodec: %u.%u.%u / %u.%u.%u\n",
+           LIBAVCODEC_VERSION_MAJOR,
+           LIBAVCODEC_VERSION_MINOR,
+           LIBAVCODEC_VERSION_MICRO,
+           AV_VERSION_MAJOR(avcodec),
+           AV_VERSION_MINOR(avcodec),
+           AV_VERSION_MICRO(avcodec));
+
+    unsigned avformat = avformat_version();
+    printf(" - libavformat: %u.%u.%u / %u.%u.%u\n",
+           LIBAVFORMAT_VERSION_MAJOR,
+           LIBAVFORMAT_VERSION_MINOR,
+           LIBAVFORMAT_VERSION_MICRO,
+           AV_VERSION_MAJOR(avformat),
+           AV_VERSION_MINOR(avformat),
+           AV_VERSION_MICRO(avformat));
+
+    unsigned avutil = avutil_version();
+    printf(" - libavutil: %u.%u.%u / %u.%u.%u\n",
+           LIBAVUTIL_VERSION_MAJOR,
+           LIBAVUTIL_VERSION_MINOR,
+           LIBAVUTIL_VERSION_MICRO,
+           AV_VERSION_MAJOR(avutil),
+           AV_VERSION_MINOR(avutil),
+           AV_VERSION_MICRO(avutil));
+
+#ifdef HAVE_V4L2
+    unsigned avdevice = avdevice_version();
+    printf(" - libavdevice: %u.%u.%u / %u.%u.%u\n",
+           LIBAVDEVICE_VERSION_MAJOR,
+           LIBAVDEVICE_VERSION_MINOR,
+           LIBAVDEVICE_VERSION_MICRO,
+           AV_VERSION_MAJOR(avdevice),
+           AV_VERSION_MINOR(avdevice),
+           AV_VERSION_MICRO(avdevice));
+#endif
+
+#ifdef HAVE_USB
+    const struct libusb_version *usb = libusb_get_version();
+    // The compiled version may not be known
+    printf(" - libusb: - / %u.%u.%u\n",
+           (unsigned) usb->major, (unsigned) usb->minor, (unsigned) usb->micro);
+#endif
+}

app/src/version.h

@@ -0,0 +1,9 @@
+#ifndef SC_VERSION_H
+#define SC_VERSION_H
+
+#include "common.h"
+
+void
+scrcpy_print_version(void);
+
+#endif

app/tests/test_adb_parser.c

@@ -2,8 +2,167 @@
 
 #include <assert.h>
 
+#include "adb/adb_device.h"
 #include "adb/adb_parser.h"
 
+static void test_adb_devices() {
+    char output[] =
+        "List of devices attached\n"
+        "0123456789abcdef	device usb:2-1 product:MyProduct model:MyModel "
+            "device:MyDevice transport_id:1\n"
+        "192.168.1.1:5555	device product:MyWifiProduct model:MyWifiModel "
+            "device:MyWifiDevice trandport_id:2\n";
+
+    struct sc_vec_adb_devices vec = SC_VECTOR_INITIALIZER;
+    bool ok = sc_adb_parse_devices(output, &vec);
+    assert(ok);
+    assert(vec.size == 2);
+
+    struct sc_adb_device *device = &vec.data[0];
+    assert(!strcmp("0123456789abcdef", device->serial));
+    assert(!strcmp("device", device->state));
+    assert(!strcmp("MyModel", device->model));
+
+    device = &vec.data[1];
+    assert(!strcmp("192.168.1.1:5555", device->serial));
+    assert(!strcmp("device", device->state));
+    assert(!strcmp("MyWifiModel", device->model));
+
+    sc_adb_devices_destroy(&vec);
+}
+
+static void test_adb_devices_cr() {
+    char output[] =
+        "List of devices attached\r\n"
+        "0123456789abcdef	device usb:2-1 product:MyProduct model:MyModel "
+            "device:MyDevice transport_id:1\r\n"
+        "192.168.1.1:5555	device product:MyWifiProduct model:MyWifiModel "
+            "device:MyWifiDevice trandport_id:2\r\n";
+
+    struct sc_vec_adb_devices vec = SC_VECTOR_INITIALIZER;
+    bool ok = sc_adb_parse_devices(output, &vec);
+    assert(ok);
+    assert(vec.size == 2);
+
+    struct sc_adb_device *device = &vec.data[0];
+    assert(!strcmp("0123456789abcdef", device->serial));
+    assert(!strcmp("device", device->state));
+    assert(!strcmp("MyModel", device->model));
+
+    device = &vec.data[1];
+    assert(!strcmp("192.168.1.1:5555", device->serial));
+    assert(!strcmp("device", device->state));
+    assert(!strcmp("MyWifiModel", device->model));
+
+    sc_adb_devices_destroy(&vec);
+}
+
+static void test_adb_devices_daemon_start() {
+    char output[] =
+        "* daemon not running; starting now at tcp:5037\n"
+        "* daemon started successfully\n"
+        "List of devices attached\n"
+        "0123456789abcdef	device usb:2-1 product:MyProduct model:MyModel "
+            "device:MyDevice transport_id:1\n";
+
+    struct sc_vec_adb_devices vec = SC_VECTOR_INITIALIZER;
+    bool ok = sc_adb_parse_devices(output, &vec);
+    assert(ok);
+    assert(vec.size == 1);
+
+    struct sc_adb_device *device = &vec.data[0];
+    assert(!strcmp("0123456789abcdef", device->serial));
+    assert(!strcmp("device", device->state));
+    assert(!strcmp("MyModel", device->model));
+
+    sc_adb_devices_destroy(&vec);
+}
+
+static void test_adb_devices_daemon_start_mixed() {
+    char output[] =
+        "List of devices attached\n"
+        "adb server version (41) doesn't match this client (39); killing...\n"
+        "* daemon started successfully *\n"
+        "0123456789abcdef	unauthorized usb:1-1\n"
+        "87654321	device usb:2-1 product:MyProduct model:MyModel "
+            "device:MyDevice\n";
+
+    struct sc_vec_adb_devices vec = SC_VECTOR_INITIALIZER;
+    bool ok = sc_adb_parse_devices(output, &vec);
+    assert(ok);
+    assert(vec.size == 2);
+
+    struct sc_adb_device *device = &vec.data[0];
+    assert(!strcmp("0123456789abcdef", device->serial));
+    assert(!strcmp("unauthorized", device->state));
+    assert(!device->model);
+
+    device = &vec.data[1];
+    assert(!strcmp("87654321", device->serial));
+    assert(!strcmp("device", device->state));
+    assert(!strcmp("MyModel", device->model));
+
+    sc_adb_devices_destroy(&vec);
+}
+
+static void test_adb_devices_without_eol() {
+    char output[] =
+        "List of devices attached\n"
+        "0123456789abcdef	device usb:2-1 product:MyProduct model:MyModel "
+            "device:MyDevice transport_id:1";
+
+    struct sc_vec_adb_devices vec = SC_VECTOR_INITIALIZER;
+    bool ok = sc_adb_parse_devices(output, &vec);
+    assert(ok);
+    assert(vec.size == 1);
+
+    struct sc_adb_device *device = &vec.data[0];
+    assert(!strcmp("0123456789abcdef", device->serial));
+    assert(!strcmp("device", device->state));
+    assert(!strcmp("MyModel", device->model));
+
+    sc_adb_devices_destroy(&vec);
+}
+
+static void test_adb_devices_without_header() {
+    char output[] =
+        "0123456789abcdef	device usb:2-1 product:MyProduct model:MyModel "
+            "device:MyDevice transport_id:1\n";
+
+    struct sc_vec_adb_devices vec = SC_VECTOR_INITIALIZER;
+    bool ok = sc_adb_parse_devices(output, &vec);
+    assert(!ok);
+}
+
+static void test_adb_devices_corrupted() {
+    char output[] =
+        "List of devices attached\n"
+        "corrupted_garbage\n";
+
+    struct sc_vec_adb_devices vec = SC_VECTOR_INITIALIZER;
+    bool ok = sc_adb_parse_devices(output, &vec);
+    assert(ok);
+    assert(vec.size == 0);
+}
+
+static void test_adb_devices_spaces() {
+    char output[] =
+        "List of devices attached\n"
+        "0123456789abcdef       unauthorized usb:1-4 transport_id:3\n";
+
+    struct sc_vec_adb_devices vec = SC_VECTOR_INITIALIZER;
+    bool ok = sc_adb_parse_devices(output, &vec);
+    assert(ok);
+    assert(vec.size == 1);
+
+    struct sc_adb_device *device = &vec.data[0];
+    assert(!strcmp("0123456789abcdef", device->serial));
+    assert(!strcmp("unauthorized", device->state));
+    assert(!device->model);
+
+    sc_adb_devices_destroy(&vec);
+}
+
 static void test_get_ip_single_line() {
     char ip_route[] = "192.168.1.0/24 dev wlan0  proto kernel  scope link  src "
                       "192.168.12.34\r\r\n";
@@ -86,6 +245,15 @@ int main(int argc, char *argv[]) {
     (void) argc;
     (void) argv;
 
+    test_adb_devices();
+    test_adb_devices_cr();
+    test_adb_devices_daemon_start();
+    test_adb_devices_daemon_start_mixed();
+    test_adb_devices_without_eol();
+    test_adb_devices_without_header();
+    test_adb_devices_corrupted();
+    test_adb_devices_spaces();
+
     test_get_ip_single_line();
     test_get_ip_single_line_without_eol();
     test_get_ip_single_line_with_trailing_space();

app/tests/test_buffer_util.c

@@ -8,7 +8,7 @@ static void test_buffer_write16be(void) {
     uint16_t val = 0xABCD;
     uint8_t buf[2];
 
-    buffer_write16be(buf, val);
+    sc_write16be(buf, val);
 
     assert(buf[0] == 0xAB);
     assert(buf[1] == 0xCD);
@@ -18,7 +18,7 @@ static void test_buffer_write32be(void) {
     uint32_t val = 0xABCD1234;
     uint8_t buf[4];
 
-    buffer_write32be(buf, val);
+    sc_write32be(buf, val);
 
     assert(buf[0] == 0xAB);
     assert(buf[1] == 0xCD);
@@ -30,7 +30,7 @@ static void test_buffer_write64be(void) {
     uint64_t val = 0xABCD1234567890EF;
     uint8_t buf[8];
 
-    buffer_write64be(buf, val);
+    sc_write64be(buf, val);
 
     assert(buf[0] == 0xAB);
     assert(buf[1] == 0xCD);
@@ -45,7 +45,7 @@ static void test_buffer_write64be(void) {
 static void test_buffer_read16be(void) {
     uint8_t buf[2] = {0xAB, 0xCD};
 
-    uint16_t val = buffer_read16be(buf);
+    uint16_t val = sc_read16be(buf);
 
     assert(val == 0xABCD);
 }
@@ -53,7 +53,7 @@ static void test_buffer_read16be(void) {
 static void test_buffer_read32be(void) {
     uint8_t buf[4] = {0xAB, 0xCD, 0x12, 0x34};
 
-    uint32_t val = buffer_read32be(buf);
+    uint32_t val = sc_read32be(buf);
 
     assert(val == 0xABCD1234);
 }
@@ -62,7 +62,7 @@ static void test_buffer_read64be(void) {
     uint8_t buf[8] = {0xAB, 0xCD, 0x12, 0x34,
                       0x56, 0x78, 0x90, 0xEF};
 
-    uint64_t val = buffer_read64be(buf);
+    uint64_t val = sc_read64be(buf);
 
     assert(val == 0xABCD1234567890EF);
 }

app/tests/test_vector.c

@@ -0,0 +1,421 @@
+#include "common.h"
+
+#include <assert.h>
+
+#include "util/vector.h"
+
+static void test_vector_insert_remove(void) {
+    struct SC_VECTOR(int) vec = SC_VECTOR_INITIALIZER;
+
+    bool ok;
+
+    ok = sc_vector_push(&vec, 42);
+    assert(ok);
+    assert(vec.data[0] == 42);
+    assert(vec.size == 1);
+
+    ok = sc_vector_push(&vec, 37);
+    assert(ok);
+    assert(vec.size == 2);
+    assert(vec.data[0] == 42);
+    assert(vec.data[1] == 37);
+
+    ok = sc_vector_insert(&vec, 1, 100);
+    assert(ok);
+    assert(vec.size == 3);
+    assert(vec.data[0] == 42);
+    assert(vec.data[1] == 100);
+    assert(vec.data[2] == 37);
+
+    ok = sc_vector_push(&vec, 77);
+    assert(ok);
+    assert(vec.size == 4);
+    assert(vec.data[0] == 42);
+    assert(vec.data[1] == 100);
+    assert(vec.data[2] == 37);
+    assert(vec.data[3] == 77);
+
+    sc_vector_remove(&vec, 1);
+    assert(vec.size == 3);
+    assert(vec.data[0] == 42);
+    assert(vec.data[1] == 37);
+    assert(vec.data[2] == 77);
+
+    sc_vector_clear(&vec);
+    assert(vec.size == 0);
+
+    sc_vector_destroy(&vec);
+}
+
+static void test_vector_push_array(void) {
+    struct SC_VECTOR(int) vec = SC_VECTOR_INITIALIZER;
+    bool ok;
+
+    ok = sc_vector_push(&vec, 3); assert(ok);
+    ok = sc_vector_push(&vec, 14); assert(ok);
+    ok = sc_vector_push(&vec, 15); assert(ok);
+    ok = sc_vector_push(&vec, 92); assert(ok);
+    ok = sc_vector_push(&vec, 65); assert(ok);
+    assert(vec.size == 5);
+
+    int items[] = { 1, 2, 3, 4, 5, 6, 7, 8 };
+    ok = sc_vector_push_all(&vec, items, 8);
+
+    assert(ok);
+    assert(vec.size == 13);
+    assert(vec.data[0] == 3);
+    assert(vec.data[1] == 14);
+    assert(vec.data[2] == 15);
+    assert(vec.data[3] == 92);
+    assert(vec.data[4] == 65);
+    assert(vec.data[5] == 1);
+    assert(vec.data[6] == 2);
+    assert(vec.data[7] == 3);
+    assert(vec.data[8] == 4);
+    assert(vec.data[9] == 5);
+    assert(vec.data[10] == 6);
+    assert(vec.data[11] == 7);
+    assert(vec.data[12] == 8);
+
+    sc_vector_destroy(&vec);
+}
+
+static void test_vector_insert_array(void) {
+    struct SC_VECTOR(int) vec = SC_VECTOR_INITIALIZER;
+    bool ok;
+
+    ok = sc_vector_push(&vec, 3); assert(ok);
+    ok = sc_vector_push(&vec, 14); assert(ok);
+    ok = sc_vector_push(&vec, 15); assert(ok);
+    ok = sc_vector_push(&vec, 92); assert(ok);
+    ok = sc_vector_push(&vec, 65); assert(ok);
+    assert(vec.size == 5);
+
+    int items[] = { 1, 2, 3, 4, 5, 6, 7, 8 };
+    ok = sc_vector_insert_all(&vec, 3, items, 8);
+    assert(ok);
+    assert(vec.size == 13);
+    assert(vec.data[0] == 3);
+    assert(vec.data[1] == 14);
+    assert(vec.data[2] == 15);
+    assert(vec.data[3] == 1);
+    assert(vec.data[4] == 2);
+    assert(vec.data[5] == 3);
+    assert(vec.data[6] == 4);
+    assert(vec.data[7] == 5);
+    assert(vec.data[8] == 6);
+    assert(vec.data[9] == 7);
+    assert(vec.data[10] == 8);
+    assert(vec.data[11] == 92);
+    assert(vec.data[12] == 65);
+
+    sc_vector_destroy(&vec);
+}
+
+static void test_vector_remove_slice(void) {
+    struct SC_VECTOR(int) vec = SC_VECTOR_INITIALIZER;
+
+    bool ok;
+
+    for (int i = 0; i < 100; ++i)
+    {
+        ok = sc_vector_push(&vec, i);
+        assert(ok);
+    }
+
+    assert(vec.size == 100);
+
+    sc_vector_remove_slice(&vec, 32, 60);
+    assert(vec.size == 40);
+    assert(vec.data[31] == 31);
+    assert(vec.data[32] == 92);
+
+    sc_vector_destroy(&vec);
+}
+
+static void test_vector_swap_remove(void) {
+    struct SC_VECTOR(int) vec = SC_VECTOR_INITIALIZER;
+
+    bool ok;
+
+    ok = sc_vector_push(&vec, 3); assert(ok);
+    ok = sc_vector_push(&vec, 14); assert(ok);
+    ok = sc_vector_push(&vec, 15); assert(ok);
+    ok = sc_vector_push(&vec, 92); assert(ok);
+    ok = sc_vector_push(&vec, 65); assert(ok);
+    assert(vec.size == 5);
+
+    sc_vector_swap_remove(&vec, 1);
+    assert(vec.size == 4);
+    assert(vec.data[0] == 3);
+    assert(vec.data[1] == 65);
+    assert(vec.data[2] == 15);
+    assert(vec.data[3] == 92);
+
+    sc_vector_destroy(&vec);
+}
+
+static void test_vector_index_of(void) {
+    struct SC_VECTOR(int) vec;
+    sc_vector_init(&vec);
+
+    bool ok;
+
+    for (int i = 0; i < 10; ++i)
+    {
+        ok = sc_vector_push(&vec, i);
+        assert(ok);
+    }
+
+    ssize_t idx;
+
+    idx = sc_vector_index_of(&vec, 0);
+    assert(idx == 0);
+
+    idx = sc_vector_index_of(&vec, 1);
+    assert(idx == 1);
+
+    idx = sc_vector_index_of(&vec, 4);
+    assert(idx == 4);
+
+    idx = sc_vector_index_of(&vec, 9);
+    assert(idx == 9);
+
+    idx = sc_vector_index_of(&vec, 12);
+    assert(idx == -1);
+
+    sc_vector_destroy(&vec);
+}
+
+static void test_vector_grow() {
+    struct SC_VECTOR(int) vec = SC_VECTOR_INITIALIZER;
+
+    bool ok;
+
+    for (int i = 0; i < 50; ++i)
+    {
+        ok = sc_vector_push(&vec, i); /* append */
+        assert(ok);
+    }
+
+    assert(vec.cap >= 50);
+    assert(vec.size == 50);
+
+    for (int i = 0; i < 25; ++i)
+    {
+        ok = sc_vector_insert(&vec, 20, i); /* insert in the middle */
+        assert(ok);
+    }
+
+    assert(vec.cap >= 75);
+    assert(vec.size == 75);
+
+    for (int i = 0; i < 25; ++i)
+    {
+        ok = sc_vector_insert(&vec, 0, i); /* prepend */
+        assert(ok);
+    }
+
+    assert(vec.cap >= 100);
+    assert(vec.size == 100);
+
+    for (int i = 0; i < 50; ++i)
+        sc_vector_remove(&vec, 20); /* remove from the middle */
+
+    assert(vec.cap >= 50);
+    assert(vec.size == 50);
+
+    for (int i = 0; i < 25; ++i)
+        sc_vector_remove(&vec, 0); /* remove from the head */
+
+    assert(vec.cap >= 25);
+    assert(vec.size == 25);
+
+    for (int i = 24; i >=0; --i)
+        sc_vector_remove(&vec, i); /* remove from the tail */
+
+    assert(vec.size == 0);
+
+    sc_vector_destroy(&vec);
+}
+
+static void test_vector_exp_growth(void) {
+    struct SC_VECTOR(int) vec = SC_VECTOR_INITIALIZER;
+
+    size_t oldcap = vec.cap;
+    int realloc_count = 0;
+    bool ok;
+    for (int i = 0; i < 10000; ++i)
+    {
+        ok = sc_vector_push(&vec, i);
+        assert(ok);
+        if (vec.cap != oldcap)
+        {
+            realloc_count++;
+            oldcap = vec.cap;
+        }
+    }
+
+    /* Test speciically for an expected growth factor of 1.5. In practice, the
+     * result is even lower (19) due to the first alloc of size 10 */
+    assert(realloc_count <= 23); /* ln(10000) / ln(1.5) ~= 23 */
+
+    realloc_count = 0;
+    for (int i = 9999; i >= 0; --i)
+    {
+        sc_vector_remove(&vec, i);
+        if (vec.cap != oldcap)
+        {
+            realloc_count++;
+            oldcap = vec.cap;
+        }
+    }
+
+    assert(realloc_count <= 23); /* same expectations for removals */
+    assert(realloc_count > 0); /* sc_vector_remove() must autoshrink */
+
+    sc_vector_destroy(&vec);
+}
+
+static void test_vector_reserve(void) {
+    struct SC_VECTOR(int) vec = SC_VECTOR_INITIALIZER;
+
+    bool ok;
+
+    ok = sc_vector_reserve(&vec, 800);
+    assert(ok);
+    assert(vec.cap >= 800);
+    assert(vec.size == 0);
+
+    size_t initial_cap = vec.cap;
+
+    for (int i = 0; i < 800; ++i)
+    {
+        ok = sc_vector_push(&vec, i);
+        assert(ok);
+        assert(vec.cap == initial_cap); /* no realloc */
+    }
+
+    sc_vector_destroy(&vec);
+}
+
+static void test_vector_shrink_to_fit(void) {
+    struct SC_VECTOR(int) vec = SC_VECTOR_INITIALIZER;
+
+    bool ok;
+
+    ok = sc_vector_reserve(&vec, 800);
+    assert(ok);
+    for (int i = 0; i < 250; ++i)
+    {
+        ok = sc_vector_push(&vec, i);
+        assert(ok);
+    }
+
+    assert(vec.cap >= 800);
+    assert(vec.size == 250);
+
+    sc_vector_shrink_to_fit(&vec);
+    assert(vec.cap == 250);
+    assert(vec.size == 250);
+
+    sc_vector_destroy(&vec);
+}
+
+static void test_vector_move(void) {
+    struct SC_VECTOR(int) vec = SC_VECTOR_INITIALIZER;
+
+    for (int i = 0; i < 7; ++i)
+    {
+        bool ok = sc_vector_push(&vec, i);
+        assert(ok);
+    }
+
+    /* move item at 1 so that its new position is 4 */
+    sc_vector_move(&vec, 1, 4);
+
+    assert(vec.size == 7);
+    assert(vec.data[0] == 0);
+    assert(vec.data[1] == 2);
+    assert(vec.data[2] == 3);
+    assert(vec.data[3] == 4);
+    assert(vec.data[4] == 1);
+    assert(vec.data[5] == 5);
+    assert(vec.data[6] == 6);
+
+    sc_vector_destroy(&vec);
+}
+
+static void test_vector_move_slice_forward(void) {
+    struct SC_VECTOR(int) vec = SC_VECTOR_INITIALIZER;
+
+    for (int i = 0; i < 10; ++i)
+    {
+        bool ok = sc_vector_push(&vec, i);
+        assert(ok);
+    }
+
+    /* move slice {2, 3, 4, 5} so that its new position is 5 */
+    sc_vector_move_slice(&vec, 2, 4, 5);
+
+    assert(vec.size == 10);
+    assert(vec.data[0] == 0);
+    assert(vec.data[1] == 1);
+    assert(vec.data[2] == 6);
+    assert(vec.data[3] == 7);
+    assert(vec.data[4] == 8);
+    assert(vec.data[5] == 2);
+    assert(vec.data[6] == 3);
+    assert(vec.data[7] == 4);
+    assert(vec.data[8] == 5);
+    assert(vec.data[9] == 9);
+
+    sc_vector_destroy(&vec);
+}
+
+static void test_vector_move_slice_backward(void) {
+    struct SC_VECTOR(int) vec = SC_VECTOR_INITIALIZER;
+
+    for (int i = 0; i < 10; ++i)
+    {
+        bool ok = sc_vector_push(&vec, i);
+        assert(ok);
+    }
+
+    /* move slice {5, 6, 7} so that its new position is 2 */
+    sc_vector_move_slice(&vec, 5, 3, 2);
+
+    assert(vec.size == 10);
+    assert(vec.data[0] == 0);
+    assert(vec.data[1] == 1);
+    assert(vec.data[2] == 5);
+    assert(vec.data[3] == 6);
+    assert(vec.data[4] == 7);
+    assert(vec.data[5] == 2);
+    assert(vec.data[6] == 3);
+    assert(vec.data[7] == 4);
+    assert(vec.data[8] == 8);
+    assert(vec.data[9] == 9);
+
+    sc_vector_destroy(&vec);
+}
+
+int main(int argc, char *argv[]) {
+    (void) argc;
+    (void) argv;
+
+    test_vector_insert_remove();
+    test_vector_push_array();
+    test_vector_insert_array();
+    test_vector_remove_slice();
+    test_vector_swap_remove();
+    test_vector_move();
+    test_vector_move_slice_forward();
+    test_vector_move_slice_backward();
+    test_vector_index_of();
+    test_vector_grow();
+    test_vector_exp_growth();
+    test_vector_reserve();
+    test_vector_shrink_to_fit();
+    return 0;
+}

cross_win32.txt

@@ -21,3 +21,5 @@ ffmpeg_avformat = 'avformat-58'
 ffmpeg_avutil = 'avutil-56'
 prebuilt_ffmpeg = 'ffmpeg-win32-4.3.1'
 prebuilt_sdl2 = 'SDL2-2.0.20/i686-w64-mingw32'
+prebuilt_libusb_root = 'libusb-1.0.25'
+prebuilt_libusb = prebuilt_libusb_root + '/MinGW32'

cross_win64.txt

@@ -21,3 +21,5 @@ ffmpeg_avformat = 'avformat-59'
 ffmpeg_avutil = 'avutil-57'
 prebuilt_ffmpeg = 'ffmpeg-win64-5.0'
 prebuilt_sdl2 = 'SDL2-2.0.20/x86_64-w64-mingw32'
+prebuilt_libusb_root = 'libusb-1.0.25'
+prebuilt_libusb = prebuilt_libusb_root + '/MinGW64'

install_release.sh

@@ -12,7 +12,7 @@ echo "$PREBUILT_SERVER_SHA256  scrcpy-server" | sha256sum --check
 
 echo "[scrcpy] Building client..."
 rm -rf "$BUILDDIR"
-meson "$BUILDDIR" --buildtype release --strip -Db_lto=true \
+meson "$BUILDDIR" --buildtype=release --strip -Db_lto=true \
     -Dprebuilt_server=scrcpy-server
 cd "$BUILDDIR"
 ninja

meson_options.txt

@@ -4,3 +4,5 @@ option('prebuilt_server', type: 'string', description: 'Path of the prebuilt ser
 option('portable', type: 'boolean', value: false, description: 'Use scrcpy-server from the same directory as the scrcpy executable')
 option('server_debugger', type: 'boolean', value: false, description: 'Run a server debugger and wait for a client to be attached')
 option('server_debugger_method', type: 'combo', choices: ['old', 'new'], value: 'new', description: 'Select the debugger method (Android < 9: "old", Android >= 9: "new")')
+option('v4l2', type: 'boolean', value: true, description: 'Enable V4L2 feature when supported')
+option('usb', type: 'boolean', value: true, description: 'Enable HID/OTG features when supported')

release.mk

@@ -63,24 +63,28 @@ build-server:
 	ninja -C "$(SERVER_BUILD_DIR)"
 
 prepare-deps-win32:
-	@prebuilt-deps/prepare-adb.sh
-	@prebuilt-deps/prepare-sdl.sh
-	@prebuilt-deps/prepare-ffmpeg-win32.sh
+	@app/prebuilt-deps/prepare-adb.sh
+	@app/prebuilt-deps/prepare-sdl.sh
+	@app/prebuilt-deps/prepare-ffmpeg-win32.sh
+	@app/prebuilt-deps/prepare-libusb.sh
+
+prepare-deps-win64:
+	@app/prebuilt-deps/prepare-adb.sh
+	@app/prebuilt-deps/prepare-sdl.sh
+	@app/prebuilt-deps/prepare-ffmpeg-win64.sh
+	@app/prebuilt-deps/prepare-libusb.sh
 
 build-win32: prepare-deps-win32
+	# -Dusb=false because of libusb-win32 build issue, cf #3011
 	[ -d "$(WIN32_BUILD_DIR)" ] || ( mkdir "$(WIN32_BUILD_DIR)" && \
 		meson "$(WIN32_BUILD_DIR)" \
 			--cross-file cross_win32.txt \
 			--buildtype release --strip -Db_lto=true \
+			-Dusb=false \
 			-Dcompile_server=false \
 			-Dportable=true )
 	ninja -C "$(WIN32_BUILD_DIR)"
 
-prepare-deps-win64:
-	@prebuilt-deps/prepare-adb.sh
-	@prebuilt-deps/prepare-sdl.sh
-	@prebuilt-deps/prepare-ffmpeg-win64.sh
-
 build-win64: prepare-deps-win64
 	[ -d "$(WIN64_BUILD_DIR)" ] || ( mkdir "$(WIN64_BUILD_DIR)" && \
 		meson "$(WIN64_BUILD_DIR)" \
@@ -94,37 +98,39 @@ dist-win32: build-server build-win32
 	mkdir -p "$(DIST)/$(WIN32_TARGET_DIR)"
 	cp "$(SERVER_BUILD_DIR)"/server/scrcpy-server "$(DIST)/$(WIN32_TARGET_DIR)/"
 	cp "$(WIN32_BUILD_DIR)"/app/scrcpy.exe "$(DIST)/$(WIN32_TARGET_DIR)/"
-	cp data/scrcpy-console.bat "$(DIST)/$(WIN32_TARGET_DIR)"
-	cp data/scrcpy-noconsole.vbs "$(DIST)/$(WIN32_TARGET_DIR)"
-	cp data/icon.png "$(DIST)/$(WIN32_TARGET_DIR)"
-	cp data/open_a_terminal_here.bat "$(DIST)/$(WIN32_TARGET_DIR)"
-	cp prebuilt-deps/data/ffmpeg-win32-4.3.1/bin/avutil-56.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
-	cp prebuilt-deps/data/ffmpeg-win32-4.3.1/bin/avcodec-58.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
-	cp prebuilt-deps/data/ffmpeg-win32-4.3.1/bin/avformat-58.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
-	cp prebuilt-deps/data/ffmpeg-win32-4.3.1/bin/swresample-3.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
-	cp prebuilt-deps/data/ffmpeg-win32-4.3.1/bin/swscale-5.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
-	cp prebuilt-deps/data/platform-tools-31.0.3/adb.exe "$(DIST)/$(WIN32_TARGET_DIR)/"
-	cp prebuilt-deps/data/platform-tools-31.0.3/AdbWinApi.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
-	cp prebuilt-deps/data/platform-tools-31.0.3/AdbWinUsbApi.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
-	cp prebuilt-deps/data/SDL2-2.0.20/i686-w64-mingw32/bin/SDL2.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
+	cp app/data/scrcpy-console.bat "$(DIST)/$(WIN32_TARGET_DIR)"
+	cp app/data/scrcpy-noconsole.vbs "$(DIST)/$(WIN32_TARGET_DIR)"
+	cp app/data/icon.png "$(DIST)/$(WIN32_TARGET_DIR)"
+	cp app/data/open_a_terminal_here.bat "$(DIST)/$(WIN32_TARGET_DIR)"
+	cp app/prebuilt-deps/data/ffmpeg-win32-4.3.1/bin/avutil-56.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/ffmpeg-win32-4.3.1/bin/avcodec-58.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/ffmpeg-win32-4.3.1/bin/avformat-58.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/ffmpeg-win32-4.3.1/bin/swresample-3.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/ffmpeg-win32-4.3.1/bin/swscale-5.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/platform-tools-31.0.3/adb.exe "$(DIST)/$(WIN32_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/platform-tools-31.0.3/AdbWinApi.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/platform-tools-31.0.3/AdbWinUsbApi.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/SDL2-2.0.20/i686-w64-mingw32/bin/SDL2.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
+	#cp app/prebuilt-deps/data/libusb-1.0.25/MinGW32/dll/libusb-1.0.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
 
 dist-win64: build-server build-win64
 	mkdir -p "$(DIST)/$(WIN64_TARGET_DIR)"
 	cp "$(SERVER_BUILD_DIR)"/server/scrcpy-server "$(DIST)/$(WIN64_TARGET_DIR)/"
 	cp "$(WIN64_BUILD_DIR)"/app/scrcpy.exe "$(DIST)/$(WIN64_TARGET_DIR)/"
-	cp data/scrcpy-console.bat "$(DIST)/$(WIN64_TARGET_DIR)"
-	cp data/scrcpy-noconsole.vbs "$(DIST)/$(WIN64_TARGET_DIR)"
-	cp data/icon.png "$(DIST)/$(WIN64_TARGET_DIR)"
-	cp data/open_a_terminal_here.bat "$(DIST)/$(WIN64_TARGET_DIR)"
-	cp prebuilt-deps/data/ffmpeg-win64-5.0/bin/avutil-57.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
-	cp prebuilt-deps/data/ffmpeg-win64-5.0/bin/avcodec-59.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
-	cp prebuilt-deps/data/ffmpeg-win64-5.0/bin/avformat-59.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
-	cp prebuilt-deps/data/ffmpeg-win64-5.0/bin/swresample-4.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
-	cp prebuilt-deps/data/ffmpeg-win64-5.0/bin/swscale-6.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
-	cp prebuilt-deps/data/platform-tools-31.0.3/adb.exe "$(DIST)/$(WIN64_TARGET_DIR)/"
-	cp prebuilt-deps/data/platform-tools-31.0.3/AdbWinApi.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
-	cp prebuilt-deps/data/platform-tools-31.0.3/AdbWinUsbApi.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
-	cp prebuilt-deps/data/SDL2-2.0.20/x86_64-w64-mingw32/bin/SDL2.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
+	cp app/data/scrcpy-console.bat "$(DIST)/$(WIN64_TARGET_DIR)"
+	cp app/data/scrcpy-noconsole.vbs "$(DIST)/$(WIN64_TARGET_DIR)"
+	cp app/data/icon.png "$(DIST)/$(WIN64_TARGET_DIR)"
+	cp app/data/open_a_terminal_here.bat "$(DIST)/$(WIN64_TARGET_DIR)"
+	cp app/prebuilt-deps/data/ffmpeg-win64-5.0/bin/avutil-57.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/ffmpeg-win64-5.0/bin/avcodec-59.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/ffmpeg-win64-5.0/bin/avformat-59.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/ffmpeg-win64-5.0/bin/swresample-4.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/ffmpeg-win64-5.0/bin/swscale-6.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/platform-tools-31.0.3/adb.exe "$(DIST)/$(WIN64_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/platform-tools-31.0.3/AdbWinApi.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/platform-tools-31.0.3/AdbWinUsbApi.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/SDL2-2.0.20/x86_64-w64-mingw32/bin/SDL2.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/libusb-1.0.25/MinGW64/dll/libusb-1.0.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
 
 zip-win32: dist-win32
 	cd "$(DIST)/$(WIN32_TARGET_DIR)"; \

server/src/main/java/com/genymobile/scrcpy/Options.java

@@ -21,6 +21,7 @@ public class Options {
     private boolean powerOffScreenOnClose;
     private boolean clipboardAutosync = true;
     private boolean downsizeOnError = true;
+    private boolean cleanup = true;
 
     // Options not used by the scrcpy client, but useful to use scrcpy-server directly
     private boolean sendDeviceMeta = true; // send device name and size
@@ -155,6 +156,14 @@ public class Options {
         this.downsizeOnError = downsizeOnError;
     }
 
+    public boolean getCleanup() {
+        return cleanup;
+    }
+
+    public void setCleanup(boolean cleanup) {
+        this.cleanup = cleanup;
+    }
+
     public boolean getSendDeviceMeta() {
         return sendDeviceMeta;
     }

server/src/main/java/com/genymobile/scrcpy/ScreenEncoder.java

@@ -28,7 +28,8 @@ public class ScreenEncoder implements Device.RotationListener {
     // Keep the values in descending order
     private static final int[] MAX_SIZE_FALLBACK = {2560, 1920, 1600, 1280, 1024, 800};
 
-    private static final int NO_PTS = -1;
+    private static final long PACKET_FLAG_CONFIG = 1L << 63;
+    private static final long PACKET_FLAG_KEY_FRAME = 1L << 62;
 
     private final AtomicBoolean rotationChanged = new AtomicBoolean();
     private final ByteBuffer headerBuffer = ByteBuffer.allocate(12);
@@ -183,12 +184,15 @@ public class ScreenEncoder implements Device.RotationListener {
 
         long pts;
         if ((bufferInfo.flags & MediaCodec.BUFFER_FLAG_CODEC_CONFIG) != 0) {
-            pts = NO_PTS; // non-media data packet
+            pts = PACKET_FLAG_CONFIG; // non-media data packet
         } else {
             if (ptsOrigin == 0) {
                 ptsOrigin = bufferInfo.presentationTimeUs;
             }
             pts = bufferInfo.presentationTimeUs - ptsOrigin;
+            if ((bufferInfo.flags & MediaCodec.BUFFER_FLAG_KEY_FRAME) != 0) {
+                pts |= PACKET_FLAG_KEY_FRAME;
+            }
         }
 
         headerBuffer.putLong(pts);

server/src/main/java/com/genymobile/scrcpy/Server.java

@@ -51,11 +51,13 @@ public final class Server {
             }
         }
 
-        try {
-            CleanUp.configure(options.getDisplayId(), restoreStayOn, mustDisableShowTouchesOnCleanUp, restoreNormalPowerMode,
-                    options.getPowerOffScreenOnClose());
-        } catch (IOException e) {
-            Ln.e("Could not configure cleanup", e);
+        if (options.getCleanup()) {
+            try {
+                CleanUp.configure(options.getDisplayId(), restoreStayOn, mustDisableShowTouchesOnCleanUp, restoreNormalPowerMode,
+                        options.getPowerOffScreenOnClose());
+            } catch (IOException e) {
+                Ln.e("Could not configure cleanup", e);
+            }
         }
     }
 
@@ -243,6 +245,10 @@ public final class Server {
                     boolean downsizeOnError = Boolean.parseBoolean(value);
                     options.setDownsizeOnError(downsizeOnError);
                     break;
+                case "cleanup":
+                    boolean cleanup = Boolean.parseBoolean(value);
+                    options.setCleanup(cleanup);
+                    break;
                 case "send_device_meta":
                     boolean sendDeviceMeta = Boolean.parseBoolean(value);
                     options.setSendDeviceMeta(sendDeviceMeta);