Bug: 17208461
* Switch Layer to be VirtualLightRefBase instead of
Caches' side-channel ref-counting
* Include active layers in gfxinfo dump
* Run gfxinfo dump on the correct thread
* Dump gfxinfo on Layer creation failure
Change-Id: I28d195699e2334518e215ab28c7a17355aee9678
Ignore warnings about unused parameters and initialization of static
constant float data members.
Change one potential error of allocating variable length
array of non-POD element type on stack.
Fix mismatch of class and struct declaration tags.
BUG: 17512760
Change-Id: I3a09c945fb1c17f27aff74a7e439dd4c35d1fb32
bug:17208461
They are destroyed via finalizer-enqueued destroy method, so it's not
valid to check that they've been destroyed at gl context destruction
time.
Change-Id: I670f69825547facd5f31d44acb406418881fee00
bug:15860114
Savelayers and HW layers both now support shadow casting.
For save layers, the light source should always be correct, for HW
layers, the light source position is set when the layer is created,
and updated when it is resized.
Change-Id: Ie85567dd43c2bb0a0b08fd0bd4db41efa793ac2b
Projected RenderNodes are now wrapped with a ClipRect or masked
SaveLayer, so that they are clipped to the outline of the projection
receiver surface.
Change-Id: I1d4afc1bb5d638d650bc0b1dac51a498f216773e
bug:11748993
TextureView should always be drawn with linear filtering if drawing a
buffer sized differently from the layer.
This fixes a bug where TextureViews that were sized differently from
their contents wouldn't be drawn with texture filtering, causing
visible scaling artifacts.
Change-Id: I8a5d27452fe7269ec53896992f37cff51e3ce15a
An array of indices local to a layer would only be necessary if
we changed the way we resolve T-junctions. Since we only ever
draw quads, let's just use the indices we use everywhere else.
This change also uses the global indices array to render list
of colored rectangles to save on the number of vertices generated
CPU-side.
Change-Id: Ia6d1970b0e9247805af5a114ca2a84b5d0b7c282
A clipped saveLayer will cause two draws - first to an onscreen
buffer, then again back to the framebuffer. This change - when in
overdraw debug - reissues draws associated with a clipped saveLayer,
but only to the stencil buffer. Operations within a saveLayer are
shown correctly to be twice drawn, and View.setAlpha() without an
associated hardware layer, or hasOverlappingRendering() are made more
visible.
Hardware layers, on any frame that they are updated, similarly draw
twice, and will also be counted against the stencil buffer doubly.
Note: greater depths of layers - e.g. a saveLayer within a saveLayer -
are not respected, as that would require additional region tracking.
Change-Id: I61fb0e61038fe66013d59914c20bb47a550dea7d
This change uses a new OpenGL ES 3.0 feature to upload less data when
the font cache needs to be update. This can result in significant
performance improvements on device with large textures or with locales
that use a lot of glyphs (CJK for instance.)
This change also fixes various unpack alignment issues. The unpack
alignment, as well as the unpack row length, is not texture specific
but a global state that affect all glTex/SubImage2D calls. Some of
them were missing the appropriate glPixelStorei() call. This could
result in corrupted textures.
Change-Id: Iefb429d4d0d0b4e0faeadf27daafee6d30a21d85
Bug #8378964
This change defers drawing into layers until after the renderer for FBO0
is ready to draw. At that point, all the precaching is done which means
all glyphs can be uploaded at once in the font caches.
Change-Id: Ie1f7a7ff30f76f06fb3dbc72c7d05e66207d1ecb
Bug #7146141
This change is needed to add a render buffer cache to avoid
creating and destroying stencil buffers on every frame.
This change also allows the renderer to use a 1 bit or 4 bit
stencil buffer whenever possible.
Finally this change fixes a bug introduced by a previous CL
which causes the stencil buffer to not be updated in certain
conditions. The fix relies on a new optional parameter in
drawColorRects() that can be used to avoid performing a
quickReject on rectangles generated by the clip region.
Change-Id: I2f55a8e807009887b276a83cde9f53fd5c01199f
Bug #7146141
The GL_QCOM_tiled_rendering extension requires careful use of
start/endTiling when attaching a renderbuffer dynamically.
Change-Id: I20036683ed3909ffaf40cc3d57a25257e35b6fa2
Bug #7146141
This change moves the resizeLayer() from LayerCache (where it should
never have been anyway) to Layer. This makes a little more sense.
Change-Id: I8b2f9c19c558e738405a58b9e71ec5799fc6be88
Bug #7146141
When non-rectangular clipping occurs in a layer the render buffer
used as the stencil buffer is not cached. If this happens on a
View's hardware layer the render buffer will live for as long
as the layer is bound to the view. When a stencil buffer is
required because of a call to Canvas.saveLayer() it will be allocated
on every frame. A future change will address this problem.
If "show GPU overdraw" is enabled, non-rectangular clips are not
supported anymore and we fall back to rectangular clips instead.
This is a limitation imposed by OpenGL ES that cannot be worked
around at this time.
This change also improves the Matrix4 implementation to easily
detect when a rect remains a rect after transform.
Change-Id: I0e69fb901792d38bc0c4ca1bf9fdb02d7db415b9
Bug #7326824
When a layer is taken out of the cache and initialized it gets cleared
to prepare it for future rendering. This triggers the following sequence
of operations:
glBindFramebuffer(layer.fbo)
attach texture storage to FBO
glClear()
glBindFramebuffer(defaultFbo)
The clear forces a resolve on tilers which stalls the CPU for a little
while, thus producing jank during animations. This change moves the
clear to the next frame when we know we will have to execute a resolve
anyway.
Change-Id: Ic1939c25df20ed65a4c48dc81ee549b2cd8b6ec3
Some logic depends on a default value of 0, which was not being
assigned.
Issue #7195815 chrome url bar is corrupted
Issue #7190656 Textures corrupted on mr1
Change-Id: I346b7b76e885bf8f04740e711fd88f917a5418c7
Bug #7221449
SurfaceTexture already deletes the GL texture when detachFromContext
is invoked. The newly introduced refcount would casue the Layer
object to be destroyed later and attempt to delete the GL texture
again. By the time the second cleanup occurs, the texture name
might have been reused by somebody else, resulting in erroneous
behaviors.
Change-Id: I257c589fea64b34c00f46fbfaa7732e6854a5e41
Launcher occasionally crashes with a stack trace indicating that the memory
of a Layer object is corrupt. It is possible for us to delete a Layer
structure and then, briefly, use it to draw a DisplayList again before
that DisplayList gets recreated (without the layer that got deleted).
When this happens, if the memory got corrupted, it's possible to crash.
The fix is to add Layer to the other objects which we currently refcount
(bitmaps, shaders, etc.). Then instead of deleting a Layer, we decrement the
refcount. We increment when creating it, then increment it again when it's
referenced from a DisplayList. Then we decrement the refcount instead of
deleting it, and decrement when we clear a DisplayList that refers to it.
Then when the refcount reaches 0, we delete it.
Issue #6994632 Native crash in launcher when trying to launch all apps screen
Change-Id: I0627be8d49bb2f9ba8d158a84b764bb4e7df934c
Previously, to draw a layered view with a changed Paint object for the
drawLayer operation, you'd have to invalidate the parent view, to get the
native DisplayList to pick up the new Paint properties. This change adds
API and functionality so that the developer can call setLayerPaint(), which
does the proper invalidation (lightweight, doesn't cause redrawing the view).
Issue #6923810 Make it easy to efficiently animate a layer's Paint
Change-Id: I7fea79788d50f6d9c86dd5e5b2a4490cb95142bb
