Support any number of overlay packages. Support any target package.
UPDATED PACKAGE MATCHING
------------------------
In Runtime resource overlay, iteration 1, only a single overlay package
was considered. Package matching was based on file paths:
/vendor/overlay/system/framework-res.apk corresponded to
/system/framework-res.apk. Introduce a more flexible matching scheme
where any package is an overlay package if its manifest includes
<overlay targetPackage="com.target.package"/>
For security reasons, an overlay package must fulfill certain criteria
to take effect: see below.
THE IDMAP TOOL AND IDMAP FILES
------------------------------
Idmap files are created by the 'idmap' binary; idmap files must be
present when loading packages. For the Android system, Zygote calls
'idmap' as part of the resource pre-loading. For application packages,
'idmap' is invoked via 'installd' during package installation (similar
to 'dexopt').
UPDATED FLOW
------------
The following is an outline of the start-up sequences for the Android
system and Android apps. Steps marked with '+' are introduced by this
commit.
Zygote initialization
Initial AssetManager object created
+ idmap --scan creates idmaps for overlays targeting 'android', \
stores list of overlays in /data/resource-cache/overlays.list
AssetManager caches framework-res.apk
+ AssetManager caches overlay packages listed in overlays.list
Android boot
New AssetManager's ResTable acquired
AssetManager re-uses cached framework-res.apk
+ AssetManager re-uses cached 'android' overlays (if any)
App boot
ActivityThread prepares AssetManager to load app.apk
+ ActivityThread prepares AssetManager to load app overlays (if any)
New AssetManager's ResTable acquired as per Android boot
SECURITY
--------
Overlay packages are required to be pre-loaded (in /vendor/overlay).
These packages are trusted by definition. A future iteration of runtime
resource overlay may add support for downloaded overlays, which would
likely require target and overlay signatures match for the overlay to
be trusted.
LOOKUP PRIORITY
---------------
During resource lookup, packages are sequentially queried to provide a
best match, given the constraints of the current configuration. If any
package provide a better match than what has been found so far, it
replaces the previous match. The target package is always queried last.
When loading a package with more than one overlay, the order in which
the overlays are added become significant if several packages overlay
the same resource.
Had downloaded overlays been supported, the install time could have been
used to determine the load order. Regardless, for pre-installed
overlays, the install time is randomly determined by the order in which
the Package Manager locates the packages during initial boot. To support
a well-defined order, pre-installed overlay packages are expected to
define an additional 'priority' attribute in their <overlay> tags:
<overlay targetPackage="com.target.package" priority="1234"/>
Pre-installed overlays are loaded in order of their priority attributes,
sorted in ascending order.
Assigning the same priority to several overlays targeting the same base
package leads to undefined behaviour. It is the responsibility of the
vendor to avoid this.
The following example shows the ResTable and PackageGroups after loading
an application and two overlays. The resource lookup framework will
query the packages in the order C, B, A.
+------+------+- -+------+------+
| 0x01 | | ... | | 0x7f |
+------+------+- -+------+------+
| |
"android" Target package A
|
Pre-installed overlay B (priority 1)
|
Pre-installed overlay C (priority 2)
Change-Id: If49c963149369b1957f7d2303b3dd27f669ed24e
Introduce a new tool 'idmap' to handle generation and verification of
idmap files. The tool is modelled on 'dexopt', and is intended to be
used similarly, notably by 'installd'.
See cmds/idmap/idmap.cpp for further documentation on 'idmap'.
Note: this commit is interdependent on a commit in project build/ to add
'idmap' to PRODUCT_PACKAGES.
Note: the changes to androidfw are only stubs. The actual implementation
will be provided in Runtime resource overlay, iteration 2.
Change-Id: I7131b74ece1e46c8a9c0a31d103e686aa07da2bb
Following changes have been done:
[x] Long is used to store native pointers as pointers can be
64-bit.
[x] AssetManager openAsset native function returned -1 if
file name was empty and java function considered any
non-zero value as success. This has been fixed by native
function throwing Illegal Argument Exception as well.
[x] AssetManager incRefsLocked and decRefsLocked now accept
long as input to support 64-bit native references.
[x] AssetManager incRefsLocked method incorrecly used
'this.hashCode()' instead of the passed parameter id.
This has been fixed.
[x] Some minor changes have been done to conform with
standard JNI practice (e.g. use of jint instead of int
in JNI function prototypes)
Change-Id: I095b9f900d49e51f43ad6afc47cbc23116a6a64a
Signed-off-by: Ashok Bhat <ashok.bhat@arm.com>
Signed-off-by: Craig Barber <craig.barber@arm.com>
Signed-off-by: Kévin PETIT <kevin.petit@arm.com>
Also change the order of parameters in ResTable constructors
to avoid ambiguity.
(cherry picked from commit 00b314436f4fdfada4bbf1e79ec12e9fa38aeaf1)
Change-Id: I874c5d03c134dc3c331fba423b5280366296287c
The method handleMessage(Message msg) from mHandler variable was
not checking if the timer was cancelled, so
sendMessageDelayed(obtainMessage(MSG), delay) was keeping the
timer alive. The patch simply adds a boolean and checks if the
CountDownTimer was cancelled before calling
sendMessageDelayed(obtainMessage(MSG), delay)
bug: https://code.google.com/p/android/issues/detail?id=58668
Change-Id: Ic6bbb9d33a3616f8503db222513cc14ad2270cb8
Signed-off-by: jl1990 <jlcarrasco1990@gmail.com>
Long is used in PropertyValuesHolder class to store native pointers
as they can be 64-bit. Note that jmethodID, a pointer to structures,
is also carried in long rather than int to support 64-bit system.
Change-Id: Ifb514fc8473d7c41c0d6194fc6eb85d4816b2cd9
Signed-off-by: Marcus Oakland <marcus.oakland@arm.com>
Signed-off-by: Ashok Bhat <ashok.bhat@arm.com>
Symptom: "Bottom to up" gesture can launch search panel in portrait, but "right to left" gesture CANNOT in landscape.
Root Cause: Not handled.
Solution: Set swapXY to handle this in landscape case.
Change-Id: I1793280b3656af6912e6b4583b08e80a0a38e44a
All pointers are now 64bits wide, so should be
represented as java longs and not ints.
Also changed DelegateManager and SparseWeakArray to
reflect the new world order.
(cherry picked from commit 88a8364c386c694f7ad56662ef89713dbf7c9d63)
Change-Id: Ic2f55dd6235751169c5014f9d2ccf3f544259a87
For storing pointers, long is used in
android/graphics/Camera class, as native
pointers can be 64-bit.
In addition, some minor changes have been done
to conform with standard JNI practice (e.g. use of
jint instead of int in JNI function prototypes)
Change-Id: Ic05ebf2051a225a1638a43f476bab6176c0b5c38
Signed-off-by: Ashok Bhat <ashok.bhat@arm.com>
Signed-off-by: Marcus Oakland <marcus.oakland@arm.com>
Changes in this patch include
[x] Long is used to store native pointers as they can
be 64-bit.
[x] Some minor changes have been done to conform with
standard JNI practice (e.g. use of jint instead of int
in JNI function prototypes)
[x] AssetAtlasManager is not completely 64-bit compatible
yet. Specifically mAtlasMap member has to be converted
to hold native pointer using long. Added a TODO to
AssetAtlasManager.java to indicate the change required.
Change-Id: I940433f601c6db998c1a8ffff338f5361200d5ed
Signed-off-by: Ashok Bhat <ashok.bhat@arm.com>
Signed-off-by: Craig Barber <craig.barber@arm.com>
Signed-off-by: Kévin PETIT <kevin.petit@arm.com>
Signed-off-by: Marcus Oakland <marcus.oakland@arm.com>
Symptom:
When press Home key to home screen, user is able to see the activity's window shown on top of wallpaper and below launcher(widgets).
Root Cause:
The ensureActivitiesVisibleLocked() is called pretty often (for example when a new process bound).
If the top activity "B" was finishing, then the previous activity "A" should be visible.
Therefore, the activity "A" window will be set to visible and then launched activity "A", but it does not updates the visible state in ActivityRecord for "A".
There has a timing issue that if a new activity "C" is started, "C" becomes the new top activity and be resumed.
In that case, Activity "A" window will remain visible even if it is behind a full screen activity "C" because the ActivityRecord.visble of "A" is still false, so the window visibility won't be update.
So when user press home key and back to launcher, the surface of activity "A" will be composed on top of wallpaper.
Solution:
Updates ActivityRecord.visible to true for "A". After "C" is started, the "A" will be called WindowManagerService.setAppVisibility() to set invisible, then called onStop() when execute ensureActivitiesVisibleLocked() again.
Change-Id: I536ba04b95d8d274fea6d679a6493e620bc981e2
The JNI buffer in ImageReader_imageSetup is not released when
it fails to acquire graphics buffer. After all JNI buffers are
exhausted, ACQUIRE_MAX_IMAGES will be returned and leads to
error. The JNI buffer should be released when it fails to acquire
graphics buffer.
Change-Id: I3319a58ac44e36c8593b404672a685c4b589a735
Cookies are really indices into vectors and arrays, so
they don't need to be void*. We choose int32_t instead
of size_t to allow their width to be well specified.
(cherry picked from commit ebfdd0f467e39c3af8d92cade78263935340acb7)
(cherry picked from commit a7fa2e592e2e579e5acdb903dba83fc074ebc215)
(cherry picked from commit a9d5701b034ed2d9771b3f0943e1add00741d7cd)
Change-Id: I2aed3db568b6fdc487bf99e2c5dd123206736fda
The main bug was that the AutoJavaFloatArray autoSrc was not passing in
read only. This meant that the destructor overwrote the data which
the autoDst AutoJavaFloatArray had written in it's destructor.
This case only happened if src == dest and the arrays were copies.
Also improved performance by passing in read only a few other places.
Bug: 12570144
Change-Id: Idc8764087dc165433c584b87a0f9d4ed0ec795e8
