Cherripick from master CL 79833, 79417, 78864, 80332, 87500
Add new audio mode and recording source for audio communications
other than telelphony.
The audio mode MODE_IN_CALL signals the system the device a phone
call is currently underway. There was no way for audio video
chat or VoIP applications to signal a call is underway, but not
using the telephony resources. This change introduces a new mode
to address this. Changes in other parts of the system (java
and native) are required to take this new mode into account.
The generic AudioPolicyManager is updated to not use its phone
state variable directly, but to use two new convenience methods,
isInCall() and isStateInCall(int) instead.
Add a recording source used to designate a recording stream for
voice communications such as VoIP.
Update the platform-independent audio policy manager to pass the
nature of the audio recording source to the audio policy client
interface through the AudioPolicyClientInterface::setParameters()
method.
SIP calls should set the audio mode to MODE_IN_COMMUNICATION,
Audio mode MODE_IN_CALL is reserved for telephony.
SIP: Enable built-in echo canceler if available.
1. Always initialize AudioRecord with VOICE_COMMUNICATION.
2. If echo canceler is available, disable our echo suppressor.
Note that this CL is intentionally not correcting the
getAudioSourceMax() return value in MediaRecorder.java as the
new source is hidden here.
Change-Id: Ie68cd03c50553101aa2ad838fe9459b2cf151bc8
Generally we never want to lock a buffer for write access if it is at
the "head" on the surfaceflinger side. The only exception (1) is when
the buffer is not currently in use AND there is at least one queued
buffer -- in which case, SurfaceFlinger will never use said buffer
anymore, because on the next composition around, it will be able to
retire the first queued buffer.
The logic above relies on SurfaceFlinger always retiring
and locking a buffer before composition -- unfortunately this
didn't happen during a screenshot.
This could leave us in a situation where a buffer is locked by the
application for write, and used by SurfaceFlinger for texturing,
causing a hang.
Here, we fix this issue by never assuming the exception (1), it was
intended as an optimization allowing ANativeWindow::lockBuffer() to
return sooner and was justified when most of SF composition was
done in software. The actual buffer locking is now ensured by
gralloc. We could have handled screenshots in a similar way to
a regular composition, but it could have caused glitches on screen,
essentially, taking a screenshot could cause to skip a frame.
now that we removed the notion of a "inUse" buffer in surfaceflinger
a lot of code can be simplified / removed.
noteworthy, the whole concept of "unlockClient" wrt. "compositionComplete"
is also gone.
o Prepare for publishing MediaMetadataRetriever as public API
step one:
o replaced captureFrame with getFrameAtTime
o removed getMode
o Replace MediaMetadataRetriever.captureFrame() with MediaMetadataRetriever.getFrameAtTime()
as part of the preparation for publishing MediaMetadataRetriever as public Java API
o Remove captureFrame from MediaMetadataRetriever.java class
It has been replaced by getFrameAtTime() method
o Replace extractAlbumArt() with getEmbeddedPicture() in MediaMetadataRetriever.java
o Publish MediaMetadataRetriever.java as public API
o Removed setMode() methods and related mode constants
o Removed some of the unused the metadata keys
o Updated the javadoc
o part of a multi-project change.
bug - 3309041
Change-Id: I2efb6e8b8d52897186b016cb4efda6862f5584c4
Adds a new virtualKeyQuietTimeMillis configuration resource that sets
the duration for which virtual keys will be dropped after recent touches
on screen. The default value is 0; it is intended to be overridden
per device using a resource overlay.
This change is designed to help in two cases:
1. Swipes from touchscreen into virtual key area.
2. Accidental taps in virtual key area while using on-screen keyboard.
Bug: 3089163
Change-Id: Id6733c83c2e2bc8d9553aa0e5c1fd74b741bec6e
some of these failures are not fatal and even expected in some cases
so they should not emit a dump in the log in those cases.
Change-Id: Idcfa252e3bfa9d74e27fe4ad8f8623aa01aa9c5e
- We only support 0, 90, 180, and 270 degree clockwise rotation
- Some players are known to ignore composition matrix in the MP4 file,
although this is part of the MP4 file standard.
Both QT and YT are supporting the rotation
Change-Id: I1b7f66a801e9d9c49d889c9b06dd6173fa7e76c4
Fix premature release of recording frames when physical address or metadata is stored in input video buffers
- bug 3158459
Change-Id: If297189d2a87fc3abfda68c29ac75b490b30a902
This patch makes the dispatcher drop all of its state when it is
disabled (when the screen turns off). This ensures that the dispatcher
does not get stuck thinking a pointer is still down if the screen
turned off while the user was touching the display (such as a fat touch
while hitting the power button).
Bug: 3098344
Change-Id: If50ef5804870aa1acd3179fd4b40e3cda58dd39d
Fixed a bug where we would lose the first touch point when swiping out of
the virtual key area.
Fixed a bug where we would not send an ACTION_MOVE event in cases where
individual pointers went down/up and the remaining pointers actually moved.
This is important since many applications do not handle pointer movements
during ACTION_POINTER_DOWN or ACTION_POINTER_UP. In the case of
ACTION_POINTER_UP the movement was completely lost since all pointers were
dispatched using their old location rather than the new location.
Improved motion event validation to check for duplicate pointer ids.
Added an input source constant that was missing from the NDK api but
defined in the framework api.
Added a timestamp when reporting added/removed devices in EventHub.
Bug: 3070082
Change-Id: I3206a030f43b7616e2f48006e5a9d522c4d92e56
Now overlay does ROT_90 before FLIP_V or FLIP_H. It should be FLIP_V
or FLIP_H first. The formula should be changed after overlay is fixed.
bug:3059865
Change-Id: Ie4366bf7f1fcac7383e8dfc74b1b865997bbbcc6
o Do not count the reserved space for moov if the meta data size is small
o Do not count the extra 1KB disturbing small file estimation.
o Reduce the default minimum reserved space from 4 KB to 3 KB.
o Estimate the moov size based on both duration AND file size limit is set
and set it to the smaller estimated value.
low risk change
bug - 3111983
Change-Id: I6ac2adb979d8cc12d6b4f1813d000c989add0199
We now poke user activity twice: once upon dequeueing an event
for dispatch and then again just before we dispatch it. The second
poke is to compensate for the fact that it can take a few seconds to
identify the dispatch target (if the application is responding slowly)
but we want to keep the display from going to sleep for X amount of time
after the app gets a chance to actually receive the event. This mirrors
pre-Gingerbread behavior.
Removed some unnecessary code that filters user activity pokes when sending
events to KeyGuard. We don't need this because KeyGuard already tells the
power manager to disable user activity.
Bug: 3101397
Change-Id: I8c3a77601fdef8f584e84cfdd11aa79da0ff51db
This change adds a new window type for secure system overlays
created by the system itself from non-secure system overlays that
might be created by applications that have the system alert permission.
Secure views ignore the presence of secure system overlays.
Bug: 3098519
Change-Id: I8f8398f4fdeb0469e5d71124c21bedf121bd8c07
Added support for calibrating touch size for devices that report
size as an area measurement rather than as a width.
Fixed some bugs.
Bug: 3096045
Change-Id: I30a12e73752883516ed054f8af407204bca45814
3097475: Animation setting should control the screen on animation
3096779: CRT power-on animation can briefly show the top app instead of lockscreen
There is now a parameter that controls wether the ON and/or OFF animation are
performed. we also always clear the screen to black on power off, to make
sure it won't briefly appear on power on.
HOWEVER, 3096779 is not 100% fixed in the case where we're doing the animation
because there is a race, where SF doesn't wait (b/c it doesn't know) for the
framework to have redrawn the lockscreen.
Change-Id: Ie0f02c9225fcdf24b1e8907e268eb7da2c5b0a03
Switch to using PBKDF2 for the key generation for OBBs. Any previously
generated OBBs will stop being read correctly. A small pbkdf2gen program
is available to allow generation of appropriate keys with the salts.
Bug: 3059950
Change-Id: If4305c989fd692fd1150eb270dbf751e09c37295
Rearrange structure of MountService handling of OBBs to be entirely
asynchronous so we don't rely on locking as much. We still need the
locking to support dumpsys which has been improved to output all the
data structures for OBBs.
Added more tests to cover more of the error return codes.
Oh and fix a logic inversion bug.
Change-Id: I34f541192dbbb1903b24825889b8fa8f43e6e2a9
Added the concept of a "trusted" event to distinguish between events from
attached input devices or trusted injectors vs. other applications.
This change enables us to move certain policy decisions out of the
dispatcher and into the policy itself where they can be handled more
systematically.
Change-Id: I4d56fdcdd31aaa675d452088af39a70c4e039970
This change fixes several issues where events would be dropped in the
input dispatch pipeline in such a way that the dispatcher could not
accurately track the state of the input device.
Given more robust tracking, we can now also provide robust cancelation
of input events in cases where an application might otherwise become
out of sync with the event stream due to ANR, app switch, policy decisions,
or forced focus transitions.
Pruned some of the input dispatcher log output.
Moved the responsibility for calling intercept*BeforeQueueing into
the input dispatcher instead of the input reader and added support for
early interception of injected events for events coming from trusted
sources. This enables behaviors like injection of media keys while
the screen is off, haptic feedback of injected virtual keys, so injected
events become more "first class" in a way.
Change-Id: Iec6ff1dd21e5f3c7feb80ea4feb5382bd090dbd9
Added a method to expose the audio session id at AudioSink interface
so that the AudioPlayer in stagefright can retrieve it.
Also:
- Fixed audio effect send level not being initialized in mediaplayer.
- Fixed compilation error when LOGV is enabled in mediaplayer JNI
Change-Id: I4bb55454fd63d646e0e677692d737c4843fb05fb
This change depends on the kernel having been patched to use hrtimers
instead of jiffies for scheduling epoll timeouts.
Change-Id: I216bc1c4f565e67ebcb3d2ba4280cb615932bb9e
Added a couple of micro-optimizations to avoid calling wake() unnecessarily
and reduce JNI overhead slightly.
Fixed a minor issue where we were not clearing the "next" field of Messages
returned by the MessageQueue so the Message would hold on to its successor
and potentially prevent the GC from collecting it if the message were leaked
somehow.
Change-Id: I488d29417ce0cdd7d0e447cda76ec978ef7f811c
