Remove obsolete alternative injection method

The previous commit replaced the IInterface instance (the "input" service) by the InputManager instance (retrieved by InputManager.getInstance()). Both define an "injectInputEvent" method, but the alternate version (probably) does not concern the InputManager. This reverts commit b7a06278fe.
Adapt event injection to Android 13
2022-04-16 09:28:24 +02:00 · 2022-04-16 09:25:06 +02:00
46 changed files with 308 additions and 560 deletions
--- a/BUILD.md
+++ b/BUILD.md
@ -46,7 +46,7 @@ sudo ninja -Cbuild-auto uninstall
 ### `master`
 The `master` branch concerns the latest release, and is the home page of the
-project on GitHub.
+project on Github.
 ### `dev`
@ -272,10 +272,10 @@ install` must be run as root)._
 #### Option 2: Use prebuilt server
- - [`scrcpy-server-v1.24`][direct-scrcpy-server]  
+ - [`scrcpy-server-v1.23`][direct-scrcpy-server]  
-   <sub>SHA-256: `ae74a81ea79c0dc7250e586627c278c0a9a8c5de46c9fb5c38c167fb1a36f056`</sub>
+   _(SHA-256: 2a913fd47478c0b306fca507cb0beb625e49a19ff9fc7ab904e36ef5b9fe7e68)_
-[direct-scrcpy-server]: https://github.com/Genymobile/scrcpy/releases/download/v1.24/scrcpy-server-v1.24
+[direct-scrcpy-server]: https://github.com/Genymobile/scrcpy/releases/download/v1.23/scrcpy-server-v1.23
 Download the prebuilt server somewhere, and specify its path during the Meson
 configuration:
@ -305,16 +305,13 @@ After a successful build, you can install _scrcpy_ on the system:
 sudo ninja -Cx install    # without sudo on Windows
 ```
-This installs several files:
+This installs three files:
- - `/usr/local/bin/scrcpy` (main app)
+ - `/usr/local/bin/scrcpy`
- - `/usr/local/share/scrcpy/scrcpy-server` (server to push to the device)
+ - `/usr/local/share/scrcpy/scrcpy-server`
- - `/usr/local/share/man/man1/scrcpy.1` (manpage)
+ - `/usr/local/share/man/man1/scrcpy.1`
 - `/usr/local/share/icons/hicolor/256x256/apps/icon.png` (app icon)
 - `/usr/local/share/zsh/site-functions/_scrcpy` (zsh completion)
 - `/usr/local/share/bash-completion/completions/scrcpy` (bash completion)
-You can then [run](README.md#run) `scrcpy`.
+You can then [run](README.md#run) _scrcpy_.
 ### Uninstall
--- a/README.de.md
+++ b/README.de.md
@ -375,7 +375,7 @@ Dies finden automatisch das Gerät und aktiviert den TCP/IP-Modus. Anschließend
 Alternativ kann die TCP/IP-Verbindung auch manuell per `adb` aktiviert werden:
-1. Gerät mit demselben Wi-Fi wie den Computer verbinden.
+1. Gerät mit demselben Wifi wie den Computer verbinden.
 2. IP-Adresse des Gerätes herausfinden, entweder über Einstellungen → Über das Telefon → Status, oder indem dieser Befehl ausgeführt wird:
    ```bash
--- a/README.id.md
+++ b/README.id.md
@ -218,7 +218,7 @@ variation] does not impact the recorded file.
 #### Wireless
-_Scrcpy_ menggunakan `adb` untuk berkomunikasi dengan perangkat, dan `adb` dapat [terhubung] ke perangkat melalui TCP / IP:
+_Scrcpy_ menggunakan `adb` untuk berkomunikasi dengan perangkat, dan` adb` dapat [terhubung] ke perangkat melalui TCP / IP:
 1. Hubungkan perangkat ke Wi-Fi yang sama dengan komputer Anda.
 2. Dapatkan alamat IP perangkat Anda (dalam Pengaturan → Tentang ponsel → Status).
@ -281,7 +281,7 @@ Dari terminal lain:
 scrcpy
 ```
-Untuk menghindari mengaktifkan penerusan port jarak jauh, Anda dapat memaksa sambungan maju sebagai gantinya (perhatikan `-L`, bukan `-R`):
+Untuk menghindari mengaktifkan penerusan port jarak jauh, Anda dapat memaksa sambungan maju sebagai gantinya (perhatikan `-L`, bukan` -R`):
 ```bash
 adb kill-server    # matikan server adb lokal di 5037
@ -579,7 +579,7 @@ Lihat juga [Masalah #14].
 Dalam daftar berikut, <kbd>MOD</kbd> adalah pengubah pintasan. Secara default, ini (kiri) <kbd>Alt</kbd> atau (kiri) <kbd>Super</kbd>.
-Ini dapat diubah menggunakan `--shortcut-mod`. Kunci yang memungkinkan adalah `lctrl`, `rctrl`, `lalt`, `ralt`, `lsuper` dan `rsuper`. Sebagai contoh:
+Ini dapat diubah menggunakan `--shortcut-mod`. Kunci yang memungkinkan adalah `lctrl`,`rctrl`, `lalt`,` ralt`, `lsuper` dan` rsuper`. Sebagai contoh:
 ```bash
 # gunakan RCtrl untuk jalan pintas
--- a/README.it.md
+++ b/README.it.md
@ -1,42 +1,23 @@
-_Apri il [README](README.md) originale (in inglese) e sempre aggiornato._
+_Apri il [README](README.md) originale e sempre aggiornato._
-<img src="app/data/icon.svg" width="128" height="128" alt="scrcpy" align="right" />
+# scrcpy (v1.19)
-# scrcpy (v1.23)
+Questa applicazione fornisce la visualizzazione e il controllo dei dispositivi Android collegati via USB (o [via TCP/IP][article-tcpip]). Non richiede alcun accesso _root_.
 _si pronuncia "**scr**een **c**o**py**"_
 [Leggi in altre lingue](#traduzioni)
 Questa applicazione fornisce la visualizzazione e il controllo di dispositivi Android collegati via USB (o [via TCP/IP](#tcpip-wireless)). Non richiede alcun accesso _root_.
 Funziona su _GNU/Linux_, _Windows_ e _macOS_.
 ![screenshot](assets/screenshot-debian-600.jpg)
 Si concentra su:
- - **leggerezza**: nativo, mostra solo lo schermo del dispositivo
+ - **leggerezza** (nativo, mostra solo lo schermo del dispositivo)
- - **prestazioni**: 30~120fps, in funzione del dispositivo
+ - **prestazioni** (30~60fps)
- - **qualità**: 1920×1080 o superiore
+ - **qualità** (1920×1080 o superiore)
- - **bassa latenza**: [35~70ms][lowlatency]
+ - **bassa latenza** ([35~70ms][lowlatency])
- - **tempo di avvio basso**: ~ 1secondo per visualizzare la prima immagine
+ - **tempo di avvio basso** (~ 1secondo per visualizzare la prima immagine)
- - **non invadenza**: nulla rimane installato sul dispositivo
+ - **non invadenza** (nulla viene lasciato installato sul dispositivo)
 - **vantaggi per l'utente**: nessun account, nessuna pubblicità, non è richiesta alcuna connessione a internet
 - **libertà**: software libero e a codice aperto (_free and open source_)
 [lowlatency]: https://github.com/Genymobile/scrcpy/pull/646
 Le sue caratteristiche includono:
 - [registrazione](#registrazione)
 - mirroring con [schermo del dispositivo spento](#spegnere-lo-schermo)
 - [copia-incolla](#copia-incolla) in entrambe le direzioni
 - [qualità configurabile](#configurazione-di-acquisizione)
 - schermo del dispositivo [come webcam (V4L2)](#v4l2loopback) (solo per Linux)
 - [simulazione della tastiera fisica (HID)](#simulazione-della-tastiera-fisica-HID)
 - [simulazione mouse fisico (HID)](#simulazione-del-mouse-fisico-HID)
 - [modalità OTG](#otg)
 - e altro ancora...
 ## Requisiti
@ -68,18 +49,12 @@ Compila dai sorgenti: [BUILD] (in inglese) ([procedimento semplificato][BUILD_si
 ### Linux
-Su Debian e Ubuntu:
+Su Debian (_testing_ e _sid_ per ora) e Ubuntu (20.04):
 ```
 apt install scrcpy
 ```
 Su Arch Linux:
 ```
 pacman -S scrcpy
 ```
 È disponibile anche un pacchetto [Snap]: [`scrcpy`][snap-link].
 [snap-link]: https://snapstats.org/snaps/scrcpy
@ -91,6 +66,10 @@ Per Fedora, è disponibile un pacchetto [COPR]: [`scrcpy`][copr-link].
 [COPR]: https://fedoraproject.org/wiki/Category:Copr
 [copr-link]: https://copr.fedorainfracloud.org/coprs/zeno/scrcpy/
 Per Arch Linux, è disponibile un pacchetto [AUR]: [`scrcpy`][aur-link].
 [AUR]: https://wiki.archlinux.org/index.php/Arch_User_Repository
 [aur-link]: https://aur.archlinux.org/packages/scrcpy/
 Per Gentoo, è disponibile una [Ebuild]: [`scrcpy/`][ebuild-link].
@ -163,7 +142,7 @@ Collega un dispositivo Android ed esegui:
 scrcpy
 ```
-Scrcpy accetta argomenti da riga di comando, elencati con:
+Scrcpy accetta argomenti da riga di comando, essi sono listati con:
 ```bash
 scrcpy --help
@ -207,14 +186,6 @@ scrcpy --max-fps 15
 Questo è supportato ufficialmente a partire da Android 10, ma potrebbe funzionare in versioni precedenti.
 L'attuale frame rate di acquisizione può essere stampato sulla console:
 ```
 scrcpy --print-fps
 ```
 Può anche essere abilitato o disabilitato in qualsiasi momento con <kbd>MOD</kbd>+<kbd>i</kbd>.
 #### Ritaglio
 Lo schermo del dispositivo può essere ritagliato per visualizzare solo parte di esso.
@ -287,7 +258,7 @@ I "fotogrammi saltati" sono registrati nonostante non siano mostrati in tempo re
 #### v4l2loopback
-Su Linux è possibile inviare il flusso video ad un dispositivo v4l2 loopback, cosicché un dispositivo Android possa essere aperto come una webcam da qualsiasi strumento compatibile con v4l2.
+Su Linux è possibile inviare il flusso video ad un dispositivo v4l2 loopback, cosicchè un dispositivo Android possa essere aperto come una webcam da qualsiasi strumento compatibile con v4l2.
 Il modulo `v4l2loopback` deve essere installato:
@ -350,61 +321,30 @@ scrcpy --display-buffer=50  # aggiungi 50 ms di buffer per la visualizzazione
 e per il V4L2 sink:
 ```bash
-scrcpy --v4l2-buffer=500    #  aggiungi 500 ms di buffer per il v4l2 sink
+scrcpy --v4l2-buffer=500    #  aggiungi 50 ms di buffer per il v4l2 sink
 ```
 ### Connessione
-#### TCP/IP (wireless)
+#### Wireless
 _Scrcpy_ usa `adb` per comunicare col dispositivo e `adb` può [connettersi][connect] a un dispositivo mediante TCP/IP. Il dispositivo deve essere collegato alla stessa rete del computer.
-##### Automatico
+_Scrcpy_ usa `adb` per comunicare col dispositivo e `adb` può [connettersi][connect] al dispositivo mediante TCP/IP:
-Un'opzione `--tcpip` permette di configurare automaticamente la connessione. Ci sono due varianti.
+1. Connetti il dispositivo alla stessa rete Wi-Fi del tuo computer.
-
+2. Trova l'indirizzo IP del tuo dispositivo in Impostazioni → Informazioni sul telefono → Stato, oppure   eseguendo questo comando:
 Se il dispositivo (accessibile a 192.168.1.1 in questo esempio) ascolta già su una porta (tipicamente 5555) per le connessioni adb in entrata, allora esegui:
 ```bash
 scrcpy --tcpip=192.168.1.1       # la porta predefinita è 5555
 scrcpy --tcpip=192.168.1.1:5555
 ```
 Se la modalità TCP/IP di adb è disabilitata sul dispositivo (o se non si conosce l'indirizzo IP indirizzo), collegare il dispositivo tramite USB, quindi eseguire:
 ```bash
 scrcpy --tcpip # senza argomenti
 ```
 Il comando troverà automaticamente l'indirizzo IP del dispositivo, abiliterà la modalità TCP/IP, quindi connettersi al dispositivo prima di iniziare.
 ##### Manuale
 In alternativa, è possibile abilitare la connessione TCP/IP manualmente usando `adb`:
 1. Inserisci il dispositivo in una porta USB del tuo computer.
 2. Connetti il dispositivo alla stessa rete Wi-Fi del tuo computer.
 3. Ottieni l'indirizzo IP del tuo dispositivo, in Impostazioni → Informazioni sul telefono → Stato, o
   eseguendo questo comando:
    ```bash
    adb shell ip route | awk '{print $9}'
    ```
-4. Abilita adb via TCP/IP sul tuo dispositivo: `adb tcpip 5555`.
+3. Abilita adb via TCP/IP sul tuo dispositivo: `adb tcpip 5555`.
-5. Scollega il tuo dispositivo.
+4. Scollega il tuo dispositivo.
-6. Connettiti al tuo dispositivo: `adb connect DEVICE_IP:5555` _(sostituisci `DEVICE_IP`
+5. Connetti il tuo dispositivo: `adb connect IP_DISPOSITVO:5555` _(rimpiazza `IP_DISPOSITIVO`)_.
-con l'indirizzo IP del dispositivo che hai trovato)_.
+6. Esegui `scrcpy` come al solito.
 7. Esegui `scrcpy` come al solito.
-Da Android 11, una [opzione di debug wireless][adb-wireless] permette di evitare di dover collegare fisicamente il dispositivo direttamente al computer.
+Potrebbe essere utile diminuire il bit-rate e la definizione
 [adb-wireless]: https://developer.android.com/studio/command-line/adb#connect-to-a-device-over-wi-fi-android-11+
 Se la connessione cade casualmente, esegui il comando `scrcpy` per riconnetterti. Se il comando dice che non ci sono dispositivi/emulatori trovati, prova ad eseguire `adb connect DEVICE_IP:5555` di nuovo, e poi `scrcpy` come al solito. Se dice ancora che non ne ha trovato nessuno, prova ad eseguire `adb disconnect` e poi esegui di nuovo questi due comandi.
 Potrebbe essere utile diminuire il bit-rate e la definizione:
 ```bash
 scrcpy --bit-rate 2M --max-size 800
@ -413,9 +353,10 @@ scrcpy -b2M -m800 # versione breve
 [connect]: https://developer.android.com/studio/command-line/adb.html#wireless
 #### Multi dispositivo
-Se in `adb devices` sono elencati più dispositivi, è necessario specificare il _seriale_:
+Se in `adb devices` sono listati più dispositivi, è necessario specificare il _seriale_:
 ```bash
 scrcpy --serial 0123456789abcdef
@ -429,18 +370,6 @@ scrcpy --serial 192.168.0.1:5555
 scrcpy -s 192.168.0.1:5555  # versione breve
 ```
 Se solo un dispositivo è collegato via USB o TCP/IP, è possibile selezionarlo automaticamente:
 ```bash
 # Select the only device connected via USB
 scrcpy -d             # like adb -d
 scrcpy --select-usb   # long version
 # Select the only device connected via TCP/IP
 scrcpy -e             # like adb -e
 scrcpy --select-tcpip # long version
 ```
 Puoi avviare più istanze di _scrcpy_ per diversi dispositivi.
@ -454,77 +383,37 @@ autoadb scrcpy -s '{}'
 [AutoAdb]: https://github.com/rom1v/autoadb
-#### Tunnels
+#### Tunnel SSH
-Per connettersi a un dispositivo remoto, è possibile collegare un client `adb` locale a un server remoto `adb` (purché usino la stessa versione del protocollo _adb_). ).
+Per connettersi a un dispositivo remoto è possibile collegare un client `adb` locale ad un server `adb` remoto (assunto che entrambi stiano usando la stessa versione del protocollo _adb_):
 ##### Server ADB remoto
 Per connettersi a un server ADB remoto, fate ascoltare il server su tutte le interfacce:
 ```bash
-adb kill-server
+adb kill-server    # termina il server adb locale su 5037
-adb -a nodaemon server start
+ssh -CN -L5037:localhost:5037 -R27183:localhost:27183 your_remote_computer
-# tienilo aperto
+# tieni questo aperto
 ```
-**Attenzione: tutte le comunicazioni tra i client e il server ADB non sono criptate.**
+Da un altro terminale:
 Supponi che questo server sia accessibile a 192.168.1.2. Poi, da un altro terminale, esegui scrcpy:
 ```bash
 export ADB_SERVER_SOCKET=tcp:192.168.1.2:5037
 scrcpy --tunnel-host=192.168.1.2
 ```
 Per impostazione predefinita, scrcpy utilizza la porta locale utilizzata per il tunnel `adb forward` (tipicamente `27183`, vedi `--port`). È anche possibile forzare una diversa porta del tunnel (può essere utile in situazioni più complesse, quando sono coinvolti più reindirizzamenti):
 ```
 scrcpy --tunnel-port=1234
 ```
 ##### SSH tunnel
 Per comunicare con un server ADB remoto in modo sicuro, è preferibile utilizzare un tunnel SSH.
 Per prima cosa, assicurati che il server ADB sia in esecuzione sul computer remoto:
 ```bash
 adb start-server
 ```
 Poi, crea un tunnel SSH:
 ```bash
 # local  5038 --> remote  5037
 # local 27183 <-- remote 27183
 ssh -CN -L5038:localhost:5037 -R27183:localhost:27183 your_remote_computer
 # keep this open
 ```
 Da un altro terminale, esegui scrcpy:
 ```bash
 export ADB_SERVER_SOCKET=tcp:localhost:5038
 scrcpy
 ```
 Per evitare l'abilitazione dell'apertura porte remota potresti invece forzare una "forward connection" (notare il `-L` invece di `-R`)
 ```bash
-# local  5038 --> remote  5037
+adb kill-server    # termina il server adb locale su 5037
-# local 27183 --> remote 27183
+ssh -CN -L5037:localhost:5037 -L27183:localhost:27183 your_remote_computer
 ssh -CN -L5038:localhost:5037 -L27183:localhost:27183 your_remote_computer
 # tieni questo aperto
 ```
-Da un altro terminale, esegui scrcpy:
+Da un altro terminale:
 ```bash
 export ADB_SERVER_SOCKET=tcp:localhost:5038
 scrcpy --force-adb-forward
 ```
 Come per le connessioni wireless potrebbe essere utile ridurre la qualità:
 ```
@ -662,14 +551,6 @@ scrcpy --turn-screen-off --stay-awake
 scrcpy -Sw
 ```
 #### Spegnimento alla chiusura
 Per spegnere lo schermo del dispositivo quando si chiude scrcpy:
 ```bash
 scrcpy --power-off-on-close
 ```
 #### Mostrare i tocchi
@ -715,22 +596,20 @@ Qualsiasi scorciatoia <kbd>Ctrl</kbd> viene inoltrata al dispositivo. In partico
 - <kbd>Ctrl</kbd>+<kbd>x</kbd> taglia
 - <kbd>Ctrl</kbd>+<kbd>v</kbd> incolla (dopo la sincronizzazione degli appunti da computer a dispositivo)
-Questo solitamente funziona come ci si aspetta.
+Questo solitamente funziona nella maniera più comune.
 Il comportamento reale, però, dipende dall'applicazione attiva. Per esempio _Termux_ invia SIGINT con <kbd>Ctrl</kbd>+<kbd>c</kbd>, e _K-9 Mail_ compone un nuovo messaggio.
 Per copiare, tagliare e incollare in questi casi (ma è solo supportato in Android >= 7):
- - <kbd>MOD</kbd>+<kbd>c</kbd> invia `COPY`
+ - <kbd>MOD</kbd>+<kbd>c</kbd> inietta `COPY`
- - <kbd>MOD</kbd>+<kbd>x</kbd> invia `CUT`
+ - <kbd>MOD</kbd>+<kbd>x</kbd> inietta `CUT`
- - <kbd>MOD</kbd>+<kbd>v</kbd> invia `PASTE` (dopo la sincronizzazione degli appunti da computer a dispositivo)
+ - <kbd>MOD</kbd>+<kbd>v</kbd> inietta `PASTE` (dopo la sincronizzazione degli appunti da computer a dispositivo)
-In aggiunta, <kbd>MOD</kbd>+<kbd>Shift</kbd>+<kbd>v</kbd> permette l'invio del testo degli appunti del computer come una sequenza di eventi pressione dei tasti. Questo è utile quando il componente non accetta l'incollaggio di testo (per esempio in _Termux_), ma questo può compromettere il contenuto non ASCII.
+In aggiunta, <kbd>MOD</kbd>+<kbd>Shift</kbd>+<kbd>v</kbd> permette l'iniezione del testo degli appunti del computer come una sequenza di eventi pressione dei tasti. Questo è utile quando il componente non accetta l'incollaggio di testo (per esempio in _Termux_), ma questo può rompere il contenuto non ASCII.
 **AVVISO:** Incollare gli appunti del computer nel dispositivo (sia con <kbd>Ctrl</kbd>+<kbd>v</kbd> che con <kbd>MOD</kbd>+<kbd>v</kbd>) copia il contenuto negli appunti del dispositivo. Come conseguenza, qualsiasi applicazione Android potrebbe leggere il suo contenuto. Dovresti evitare di incollare contenuti sensibili (come password) in questa maniera.
-Alcuni dispositivi non si comportano come aspettato quando si modificano gli appunti del dispositivo a livello di codice. L'opzione `--legacy-paste` è fornita per cambiare il comportamento di <kbd>Ctrl</kbd>+<kbd>v</kbd> and <kbd>MOD</kbd>+<kbd>v</kbd> in modo tale che anch'essi inviino il testo degli appunti del computer come una sequenza di eventi di pressione dei tasti (nella stessa maniera di <kbd>MOD</kbd>+<kbd>Shift</kbd>+<kbd>v</kbd>).
+Alcuni dispositivi non si comportano come aspettato quando si modificano gli appunti del dispositivo a livello di codice. L'opzione `--legacy-paste` è fornita per cambiare il comportamento di <kbd>Ctrl</kbd>+<kbd>v</kbd> and <kbd>MOD</kbd>+<kbd>v</kbd> in modo tale che anch'essi iniettino il testo gli appunti del computer come una sequenza di eventi pressione dei tasti (nella stessa maniera di <kbd>MOD</kbd>+<kbd>Shift</kbd>+<kbd>v</kbd>).
 Per disabilitare la sincronizzazione automatica degli appunti, usa `--no-clipboard-autosync`.
 #### Pizzica per zoomare (pinch-to-zoom)
@ -738,98 +617,16 @@ Per simulare il "pizzica per zoomare": <kbd>Ctrl</kbd>+_click e trascina_.
 Più precisamente, tieni premuto <kbd>Ctrl</kbd> mentre premi il pulsante sinistro. Finchè il pulsante non sarà rilasciato, tutti i movimenti del mouse ridimensioneranno e ruoteranno il contenuto (se supportato dall'applicazione) relativamente al centro dello schermo.
-Concretamente, scrcpy genera degli eventi di tocco addizionali di un "dito virtuale" nella posizione simmetricamente opposta rispetto al centro dello schermo.
+Concretamente scrcpy genera degli eventi di tocco addizionali di un "dito virtuale" nella posizione simmetricamente opposta rispetto al centro dello schermo.
 #### Simulazione della tastiera fisica (HID)
 Per impostazione predefinita, scrcpy utilizza l'invio dei tasti o del testo di Android: funziona ovunque, ma è limitato all'ASCII.
 In alternativa scrcpy può simulare una tastiera fisica USB su Android per fornire una migliore esperienza di input (utilizzando [USB HID over AOAv2][hid-aoav2]): la tastiera virtuale è disabilitata e funziona per tutti i caratteri e IME.
 [hid-aoav2]: https://source.android.com/devices/accessories/aoa2#hid-support
 Tuttavia, funziona solo se il dispositivo è collegato via USB.
 Nota: su Windows, può funzionare solo in [odalità OTG](#otg), non durante il mirroring (non è possibile aprire un dispositivo USB se è già aperto da un altro processo come il daemon adb).
 Per abilitare questa modalità:
 ```bash
 scrcpy --hid-keyboard
 scrcpy -K # versione breve
 ```
 Se fallisce per qualche motivo (per esempio perché il dispositivo non è connesso via USB), ritorna automaticamente alla modalità predefinita (con un log nella console). Questo permette di usare le stesse opzioni della linea di comando quando si è connessi via USB e TCP/IP.
 In questa modalità, gli eventi i pressione originali (scancodes) sono inviati al dispositivo, indipendentemente dalla mappatura dei tasti dell'host. Pertanto, se il layout della tua tastiera non corrisponde, deve essere configurato sul dispositivo Android, in Impostazioni → Sistema → Lingue e input → [Tastiera fisica] (in inglese).
 Questa pagina di impostazioni può essere avviata direttamente:
 ```bash
 adb shell am start -a android.settings.HARD_KEYBOARD_SETTINGS
 ```
 Tuttavia, l'opzione è disponibile solo quando la tastiera HID è abilitata (o quando una tastiera fisica è collegata).
 [Tastiera fisica]: https://github.com/Genymobile/scrcpy/pull/2632#issuecomment-923756915
 #### Simulazione del mouse fisico (HID)
 In modo simile alla simulazione della tastiera fisica, è possibile simulare un mouse fisico. Allo stesso modo funziona solo se il dispositivo è connesso via USB.
 Per impostazione predefinita, scrcpy utilizza l'invio degli eventi del mouse di Android, utilizzando coordinate assolute. Simulando un mouse fisico, un puntatore del mouse appare sul dispositivo Android e vengono inviati i movimenti relativi del mouse, i click e gli scorrimenti.
 Per abilitare questa modalità:
 ```bash
 scrcpy --hid-mouse
 scrcpy -M # versione breve
 ```
 Si potrebbe anche aggiungere `--forward-all-clicks` a [inoltra tutti i pulsanti del mouse][forward_all_clicks].
 [forward_all_clicks]: #click-destro-e-click-centrale
-Quando questa modalità è attivata, il mouse del computer viene "catturato" (il puntatore del mouse scompare dal computer e appare invece sul dispositivo Android).
+#### Preferenze di iniezione del testo
 I tasti speciali di cattura, <kbd>Alt</kbd> o <kbd>Super</kbd>, commutano (disabilitano o abilitano) la cattura del mouse. Usa uno di essi per ridare il controllo del mouse al computer.
 #### OTG
 È possibile eseguire _scrcpy_ con la sola simulazione della tastiera fisica e del mouse (HID), come se la tastiera e il mouse del computer fossero collegati direttamente al dispositivo tramite un cavo OTG.
 In questa modalità, _adb_ (debug USB) non è necessario e il mirroring è disabilitato.
 Per attivare la modallità OTG:
 ```bash
 scrcpy --otg
 # Passa la seriale se sono disponibili diversi dispositivi USB
 scrcpy --otg -s 0123456789abcdef
 ```
 È possibile abilitare solo la tastiera HID o il mouse HID:
 ```bash
 scrcpy --otg --hid-keyboard # solo la tastiera
 scrcpy --otg --hid-mouse # solo mouse
 scrcpy --otg --hid-keyboard --hid-mouse # tastiera e mouse
 # per comodità, abilita entrambi per default
 scrcpy --otg # tastiera e mouse
 ```
 Come `--hid-keyboard` e `--hid-mouse`, funziona solo se il dispositivo è collegato via USB.
 #### Preferenze di invio del testo
 Ci sono due tipi di [eventi][textevents] generati quando si scrive testo:
 - _eventi di pressione_, segnalano che tasto è stato premuto o rilasciato;
 - _eventi di testo_, segnalano che del testo è stato inserito.
-In maniera predefinita le lettere sono inviate usando gli eventi di pressione, in maniera tale che la tastiera si comporti come aspettato nei giochi (come accade solitamente per i tasti WASD).
+In maniera predefinita le lettere sono "iniettate" usando gli eventi di pressione, in maniera tale che la tastiera si comporti come aspettato nei giochi (come accade solitamente per i tasti WASD).
 Questo, però, può [causare problemi][prefertext]. Se incontri un problema del genere, puoi evitarlo con:
@ -839,21 +636,13 @@ scrcpy --prefer-text
 (ma questo romperà il normale funzionamento della tastiera nei giochi)
 Al contrario, si potrebbe forzare per inviare sempre eventi di pressione grezzi:
 ```bash
 scrcpy --raw-key-events
 ```
 Queste opzioni non hanno effetto sulla tastiera HID (tutti gli eventi di pressione sono inviati come scancodes in questa modalità).
 [textevents]: https://blog.rom1v.com/2018/03/introducing-scrcpy/#handle-text-input
 [prefertext]: https://github.com/Genymobile/scrcpy/issues/650#issuecomment-512945343
 #### Ripetizione di tasti
-In maniera predefinita, tenere premuto un tasto genera una ripetizione degli eventi di pressione di tale tasto. Questo può creare problemi di performance in alcuni giochi, dove questi eventi sono inutilizzati.
+In maniera predefinita tenere premuto un tasto genera una ripetizione degli eventi di pressione di tale tasto. Questo può creare problemi di performance in alcuni giochi, dove questi eventi sono inutilizzati.
 Per prevenire l'inoltro ripetuto degli eventi di pressione:
@ -861,12 +650,9 @@ Per prevenire l'inoltro ripetuto degli eventi di pressione:
 scrcpy --no-key-repeat
 ```
 Questa opzione non ha effetto sulla tastiera HID (la ripetizione dei tasti è gestita da Android direttamente in questa modalità).
 #### Click destro e click centrale
-In maniera predefinita, click destro aziona BACK (indietro) o POWER on (accensione) e il click centrale aziona HOME. Per disabilitare queste scorciatoie e, invece, inviare i click al dispositivo:
+In maniera predefinita, click destro aziona BACK (indietro) e il click centrale aziona HOME. Per disabilitare queste scorciatoie e, invece, inviare i click al dispositivo:
 ```bash
 scrcpy --forward-all-clicks
@ -919,7 +705,7 @@ scrcpy --shortcut-mod=rctrl
 scrcpy --shortcut-mod=lctrl+lalt,lsuper
 ```
-_<kbd>[Super]</kbd> è solitamente il pulsante <kbd>Windows</kbd> o <kbd>Cmd</kbd>._
+_<kbd>[Super]</kbd> è il pulsante <kbd>Windows</kbd> o <kbd>Cmd</kbd>._
 [Super]: https://it.wikipedia.org/wiki/Tasto_Windows
 <!-- https://en.wikipedia.org/wiki/Super_key_(keyboard_button) è la pagina originale di Wikipedia inglese, l'ho sostituita con una simile in quello italiano -->
@ -934,7 +720,7 @@ _<kbd>[Super]</kbd> è solitamente il pulsante <kbd>Windows</kbd> o <kbd>Cmd</kb
 | Premi il tasto `HOME`                             | <kbd>MOD</kbd>+<kbd>h</kbd> \| _Click centrale_
 | Premi il tasto `BACK`                             | <kbd>MOD</kbd>+<kbd>b</kbd> \| _Click destro²_
 | Premi il tasto `APP_SWITCH`                       | <kbd>MOD</kbd>+<kbd>s</kbd> \| _4° click³_
- | Premi il tasto `MENU` (sblocca lo schermo)⁴           | <kbd>MOD</kbd>+<kbd>m</kbd>
+ | Premi il tasto `MENU` (sblocca lo schermo)             | <kbd>MOD</kbd>+<kbd>m</kbd>
 | Premi il tasto `VOLUME_UP`                        | <kbd>MOD</kbd>+<kbd>↑</kbd> _(su)_
 | Premi il tasto `VOLUME_DOWN`                      | <kbd>MOD</kbd>+<kbd>↓</kbd> _(giù)_
 | Premi il tasto `POWER`                            | <kbd>MOD</kbd>+<kbd>p</kbd>
@ -945,20 +731,17 @@ _<kbd>[Super]</kbd> è solitamente il pulsante <kbd>Windows</kbd> o <kbd>Cmd</kb
 | Espandi il pannello delle notifiche                   | <kbd>MOD</kbd>+<kbd>n</kbd> \| _5° click³_
 | Espandi il pannello delle impostazioni                   | <kbd>MOD</kbd>+<kbd>n</kbd>+<kbd>n</kbd> \| _Doppio 5° click³_
 | Chiudi pannelli                 | <kbd>MOD</kbd>+<kbd>Shift</kbd>+<kbd>n</kbd>
- | Copia negli appunti⁵                          | <kbd>MOD</kbd>+<kbd>c</kbd>
+ | Copia negli appunti⁴                          | <kbd>MOD</kbd>+<kbd>c</kbd>
- | Taglia negli appunti⁵                           | <kbd>MOD</kbd>+<kbd>x</kbd>
+ | Taglia negli appunti⁴                           | <kbd>MOD</kbd>+<kbd>x</kbd>
- | Sincronizza gli appunti e incolla⁵           | <kbd>MOD</kbd>+<kbd>v</kbd>
+ | Sincronizza gli appunti e incolla⁴           | <kbd>MOD</kbd>+<kbd>v</kbd>
- | Invia il testo degli appunti del computer              | <kbd>MOD</kbd>+<kbd>Shift</kbd>+<kbd>v</kbd>
+ | Inietta il testo degli appunti del computer              | <kbd>MOD</kbd>+<kbd>Shift</kbd>+<kbd>v</kbd>
 | Abilita/Disabilita il contatore FPS (su stdout)      | <kbd>MOD</kbd>+<kbd>i</kbd>
 | Pizzica per zoomare                               | <kbd>Ctrl</kbd>+_click e trascina_
 | Trascina file APK                        | Installa APK dal computer
 | Trascina file non-APK                    | [Trasferisci file verso il dispositivo](#push-file-to-device)
 _¹Doppio click sui bordi neri per rimuoverli._  
 _²Il tasto destro accende lo schermo se era spento, preme BACK in caso contrario._  
 _³4° e 5° pulsante del mouse, se il tuo mouse ne dispone._  
-_⁴Per le app native react in sviluppo, `MENU` attiva il menu di sviluppo._  
+_⁴Solo in Android >= 7._
 _⁵Solo in Android >= 7._
 Le scorciatoie con pulsanti ripetuti sono eseguite rilasciando e premendo il pulsante una seconda volta. Per esempio, per eseguire "Espandi il pannello delle impostazioni":
@ -1028,14 +811,3 @@ Leggi la [pagina per sviluppatori].
 [article-intro]: https://blog.rom1v.com/2018/03/introducing-scrcpy/
 [article-tcpip]: https://www.genymotion.com/blog/open-source-project-scrcpy-now-works-wirelessly/
 ## Contatti
 Se incontri un bug, per favore leggi prima le [FAQ](FAQ.it.md), poi apri una [issue].
 [issue]: https://github.com/Genymobile/scrcpy/issues
 Per domande generali o discussioni, puoi anche usare:
 - Reddit: [`r/scrcpy`](https://www.reddit.com/r/scrcpy)
 - Twitter: [`@scrcpy_app`](https://twitter.com/scrcpy_app)
--- a/README.md
+++ b/README.md
@ -1,4 +1,4 @@
-# scrcpy (v1.24)
+# scrcpy (v1.23)
 <img src="app/data/icon.svg" width="128" height="128" alt="scrcpy" align="right" />
@ -7,7 +7,7 @@ _pronounced "**scr**een **c**o**py**"_
 [Read in another language](#translations)
 This application provides display and control of Android devices connected via
-USB or [over TCP/IP](#tcpip-wireless). It does not require any _root_ access.
+USB (or [over TCP/IP](#tcpip-wireless)). It does not require any _root_ access.
 It works on _GNU/Linux_, _Windows_ and _macOS_.
 ![screenshot](assets/screenshot-debian-600.jpg)
@ -19,7 +19,7 @@ It focuses on:
 - **quality**: 1920×1080 or above
 - **low latency**: [35~70ms][lowlatency]
 - **low startup time**: ~1 second to display the first image
- - **non-intrusiveness**: nothing is left installed on the Android device
+ - **non-intrusiveness**: nothing is left installed on the device
 - **user benefits**: no account, no ads, no internet required
 - **freedom**: free and open source software
@ -27,10 +27,10 @@ It focuses on:
 Its features include:
 - [recording](#recording)
- - mirroring with [Android device screen off](#turn-screen-off)
+ - mirroring with [device screen off](#turn-screen-off)
 - [copy-paste](#copy-paste) in both directions
 - [configurable quality](#capture-configuration)
- - Android device [as a webcam (V4L2)](#v4l2loopback) (Linux-only)
+ - device screen [as a webcam (V4L2)](#v4l2loopback) (Linux-only)
 - [physical keyboard simulation (HID)](#physical-keyboard-simulation-hid)
 - [physical mouse simulation (HID)](#physical-mouse-simulation-hid)
 - [OTG mode](#otg)
@ -40,12 +40,12 @@ Its features include:
 The Android device requires at least API 21 (Android 5.0).
-Make sure you [enable adb debugging][enable-adb] on your device(s).
+Make sure you [enabled adb debugging][enable-adb] on your device(s).
 [enable-adb]: https://developer.android.com/studio/command-line/adb.html#Enabling
 On some devices, you also need to enable [an additional option][control] to
-control it using a keyboard and mouse.
+control it using keyboard and mouse.
 [control]: https://github.com/Genymobile/scrcpy/issues/70#issuecomment-373286323
@ -97,19 +97,19 @@ For Gentoo, an [Ebuild] is available: [`scrcpy/`][ebuild-link].
 [Ebuild]: https://wiki.gentoo.org/wiki/Ebuild
 [ebuild-link]: https://github.com/maggu2810/maggu2810-overlay/tree/master/app-mobilephone/scrcpy
-You can also [build the app manually][BUILD] ([simplified
+You could also [build the app manually][BUILD] ([simplified
 process][BUILD_simple]).
 ### Windows
-For Windows, a prebuilt archive with all the dependencies (including `adb`) is
+For Windows, for simplicity, a prebuilt archive with all the dependencies
-available:
+(including `adb`) is available:
- - [`scrcpy-win64-v1.24.zip`][direct-win64]  
+ - [`scrcpy-win64-v1.23.zip`][direct-win64]  
-   <sub>SHA-256: `6ccb64cba0a3e75715e85a188daeb4f306a1985f8ce123eba92ba74fc9b27367`</sub>
+   _(SHA-256: d2f601b1d0157faf65153d8a093d827fd65aec5d5842d677ac86fb2b5b7704cc)_
-[direct-win64]: https://github.com/Genymobile/scrcpy/releases/download/v1.24/scrcpy-win64-v1.24.zip
+[direct-win64]: https://github.com/Genymobile/scrcpy/releases/download/v1.23/scrcpy-win64-v1.23.zip
 It is also available in [Chocolatey]:
@ -148,7 +148,7 @@ You need `adb`, accessible from your `PATH`. If you don't have it yet:
 brew install android-platform-tools
 ```
-It's also available in [MacPorts], which sets up `adb` for you:
+It's also available in [MacPorts], which sets up adb for you:
 ```bash
 sudo port install scrcpy
@ -162,7 +162,7 @@ You can also [build the app manually][BUILD].
 ## Run
-Plug an Android device into your computer, and execute:
+Plug an Android device, and execute:
 ```bash
 scrcpy
@ -180,7 +180,7 @@ scrcpy --help
 #### Reduce size
-Sometimes, it is useful to mirror an Android device at a lower resolution to
+Sometimes, it is useful to mirror an Android device at a lower definition to
 increase performance.
 To limit both the width and height to some value (e.g. 1024):
@ -190,8 +190,8 @@ scrcpy --max-size 1024
 scrcpy -m 1024  # short version
 ```
-The other dimension is computed so that the Android device aspect ratio is
+The other dimension is computed to that the device aspect ratio is preserved.
-preserved. That way, a device in 1920×1080 will be mirrored at 1024×576.
+That way, a device in 1920×1080 will be mirrored at 1024×576.
 #### Change bit-rate
@ -226,7 +226,7 @@ It may also be enabled or disabled at any time with <kbd>MOD</kbd>+<kbd>i</kbd>.
 The device screen may be cropped to mirror only part of the screen.
-This is useful, for example, to mirror only one eye of the Oculus Go:
+This is useful for example to mirror only one eye of the Oculus Go:
 ```bash
 scrcpy --crop 1224:1440:0:0   # 1224x1440 at offset (0,0)
@ -237,6 +237,7 @@ If `--max-size` is also specified, resizing is applied after cropping.
 #### Lock video orientation
 To lock the orientation of the mirroring:
 ```bash
@ -261,7 +262,7 @@ crash. It is possible to select a different encoder:
 scrcpy --encoder OMX.qcom.video.encoder.avc
 ```
-To list the available encoders, you can pass an invalid encoder name; the
+To list the available encoders, you could pass an invalid encoder name, the
 error will give the available encoders:
 ```bash
@ -325,7 +326,7 @@ v4l2-ctl --list-devices
 ls /dev/video*
 ```
-To start `scrcpy` using a v4l2 sink:
+To start scrcpy using a v4l2 sink:
 ```bash
 scrcpy --v4l2-sink=/dev/videoN
@ -333,7 +334,7 @@ scrcpy --v4l2-sink=/dev/videoN --no-display  # disable mirroring window
 scrcpy --v4l2-sink=/dev/videoN -N            # short version
 ```
-(replace `N` with the device ID, check with `ls /dev/video*`)
+(replace `N` by the device ID, check with `ls /dev/video*`)
 Once enabled, you can open your video stream with a v4l2-capable tool:
@ -349,7 +350,7 @@ For example, you could capture the video within [OBS].
 #### Buffering
-It is possible to add buffering. This increases latency, but reduces jitter (see
+It is possible to add buffering. This increases latency but reduces jitter (see
 [#2464]).
 [#2464]: https://github.com/Genymobile/scrcpy/issues/2464
@ -381,14 +382,14 @@ An option `--tcpip` allows to configure the connection automatically. There are
 two variants.
 If the device (accessible at 192.168.1.1 in this example) already listens on a
-port (typically 5555) for incoming _adb_ connections, then run:
+port (typically 5555) for incoming adb connections, then run:
 ```bash
 scrcpy --tcpip=192.168.1.1       # default port is 5555
 scrcpy --tcpip=192.168.1.1:5555
 ```
-If _adb_ TCP/IP mode is disabled on the device (or if you don't know the IP
+If adb TCP/IP mode is disabled on the device (or if you don't know the IP
 address), connect the device over USB, then run:
 ```bash
@ -412,7 +413,7 @@ Alternatively, it is possible to enable the TCP/IP connection manually using
    adb shell ip route | awk '{print $9}'
    ```
-4. Enable `adb` over TCP/IP on your device: `adb tcpip 5555`.
+4. Enable adb over TCP/IP on your device: `adb tcpip 5555`.
 5. Unplug your device.
 6. Connect to your device: `adb connect DEVICE_IP:5555` _(replace `DEVICE_IP`
 with the device IP address you found)_.
@ -426,9 +427,9 @@ having to physically connect your device directly to your computer.
 If the connection randomly drops, run your `scrcpy` command to reconnect. If it
 says there are no devices/emulators found, try running `adb connect
 DEVICE_IP:5555` again, and then `scrcpy` as usual. If it still says there are
-none found, try running `adb disconnect`, and then run those two commands again.
+none found, try running `adb disconnect` and then run those two commands again.
-It may be useful to decrease the bit-rate and the resolution:
+It may be useful to decrease the bit-rate and the definition:
 ```bash
 scrcpy --bit-rate 2M --max-size 800
@ -490,7 +491,7 @@ protocol).
 ##### Remote ADB server
-To connect to a remote _adb server_, make the server listen on all interfaces:
+To connect to a remote ADB server, make the server listen on all interfaces:
 ```bash
 adb kill-server
@ -498,18 +499,17 @@ adb -a nodaemon server start
 # keep this open
 ```
-**Warning: all communications between clients and the _adb server_ are
+**Warning: all communications between clients and ADB server are unencrypted.**
 unencrypted.**
 Suppose that this server is accessible at 192.168.1.2. Then, from another
-terminal, run `scrcpy`:
+terminal, run scrcpy:
 ```bash
 export ADB_SERVER_SOCKET=tcp:192.168.1.2:5037
 scrcpy --tunnel-host=192.168.1.2
 ```
-By default, `scrcpy` uses the local port used for `adb forward` tunnel
+By default, scrcpy uses the local port used for `adb forward` tunnel
 establishment (typically `27183`, see `--port`). It is also possible to force a
 different tunnel port (it may be useful in more complex situations, when more
 redirections are involved):
@ -521,16 +521,16 @@ scrcpy --tunnel-port=1234
 ##### SSH tunnel
-To communicate with a remote _adb server_ securely, it is preferable to use an
+To communicate with a remote ADB server securely, it is preferable to use a SSH
-SSH tunnel.
+tunnel.
-First, make sure the _adb server_ is running on the remote computer:
+First, make sure the ADB server is running on the remote computer:
 ```bash
 adb start-server
 ```
-Then, establish an SSH tunnel:
+Then, establish a SSH tunnel:
 ```bash
 # local  5038 --> remote  5037
@ -539,7 +539,7 @@ ssh -CN -L5038:localhost:5037 -R27183:localhost:27183 your_remote_computer
 # keep this open
 ```
-From another terminal, run `scrcpy`:
+From another terminal, run scrcpy:
 ```bash
 export ADB_SERVER_SOCKET=tcp:localhost:5038
@ -556,7 +556,7 @@ ssh -CN -L5038:localhost:5037 -L27183:localhost:27183 your_remote_computer
 # keep this open
 ```
-From another terminal, run `scrcpy`:
+From another terminal, run scrcpy:
 ```bash
 export ADB_SERVER_SOCKET=tcp:localhost:5038
@ -598,7 +598,7 @@ scrcpy --window-borderless
 #### Always on top
-To keep the _scrcpy_ window always on top:
+To keep the scrcpy window always on top:
 ```bash
 scrcpy --always-on-top
@ -623,7 +623,7 @@ The window may be rotated:
 scrcpy --rotation 1
 ```
-Possible values:
+Possibles values are:
 - `0`: no rotation
 - `1`: 90 degrees counterclockwise
 - `2`: 180 degrees
@ -672,19 +672,19 @@ adb shell dumpsys display   # search "mDisplayId=" in the output
 ```
 The secondary display may only be controlled if the device runs at least Android
-10 (otherwise it is mirrored as read-only).
+10 (otherwise it is mirrored in read-only).
 #### Stay awake
-To prevent the device from sleeping after a delay when the device is plugged in:
+To prevent the device to sleep after some delay when the device is plugged in:
 ```bash
 scrcpy --stay-awake
 scrcpy -w
 ```
-The initial state is restored when _scrcpy_ is closed.
+The initial state is restored when scrcpy is closed.
 #### Turn screen off
@ -702,10 +702,9 @@ Or by pressing <kbd>MOD</kbd>+<kbd>o</kbd> at any time.
 To turn it back on, press <kbd>MOD</kbd>+<kbd>Shift</kbd>+<kbd>o</kbd>.
 On Android, the `POWER` button always turns the screen on. For convenience, if
-`POWER` is sent via _scrcpy_ (via right-click or <kbd>MOD</kbd>+<kbd>p</kbd>),
+`POWER` is sent via scrcpy (via right-click or <kbd>MOD</kbd>+<kbd>p</kbd>), it
-it will force to turn the screen off after a small delay (on a best effort
+will force to turn the screen off after a small delay (on a best effort basis).
-basis).  The physical `POWER` button will still cause the screen to be turned
+The physical `POWER` button will still cause the screen to be turned on.
 on.
 It can also be useful to prevent the device from sleeping:
@ -716,22 +715,12 @@ scrcpy -Sw
 #### Power off on close
-To turn the device screen off when closing _scrcpy_:
+To turn the device screen off when closing scrcpy:
 ```bash
 scrcpy --power-off-on-close
 ```
 #### Power on on start
 By default, on start, the device is powered on.
 To prevent this behavior:
 ```bash
 scrcpy --no-power-on
 ```
 #### Show touches
@ -748,13 +737,12 @@ scrcpy --show-touches
 scrcpy -t
 ```
-Note that it only shows _physical_ touches (by a finger on the device).
+Note that it only shows _physical_ touches (with the finger on the device).
 #### Disable screensaver
-By default, _scrcpy_ does not prevent the screensaver from running on the
+By default, scrcpy does not prevent the screensaver to run on the computer.
 computer.
 To disable it:
@ -796,18 +784,18 @@ To copy, cut and paste in such cases (but only supported on Android >= 7):
 - <kbd>MOD</kbd>+<kbd>v</kbd> injects `PASTE` (after computer-to-device
   clipboard synchronization)
-In addition, <kbd>MOD</kbd>+<kbd>Shift</kbd>+<kbd>v</kbd> injects the computer
+In addition, <kbd>MOD</kbd>+<kbd>Shift</kbd>+<kbd>v</kbd> allows to inject the
-clipboard text as a sequence of key events. This is useful when the component
+computer clipboard text as a sequence of key events. This is useful when the
-does not accept text pasting (for example in _Termux_), but it can break
+component does not accept text pasting (for example in _Termux_), but it can
-non-ASCII content.
+break non-ASCII content.
 **WARNING:** Pasting the computer clipboard to the device (either via
 <kbd>Ctrl</kbd>+<kbd>v</kbd> or <kbd>MOD</kbd>+<kbd>v</kbd>) copies the content
-into the Android clipboard. As a consequence, any Android application could read
+into the device clipboard. As a consequence, any Android application could read
-its content. You should avoid pasting sensitive content (like passwords) that
+its content. You should avoid to paste sensitive content (like passwords) that
 way.
-Some Android devices do not behave as expected when setting the device clipboard
+Some devices do not behave as expected when setting the device clipboard
 programmatically. An option `--legacy-paste` is provided to change the behavior
 of <kbd>Ctrl</kbd>+<kbd>v</kbd> and <kbd>MOD</kbd>+<kbd>v</kbd> so that they
 also inject the computer clipboard text as a sequence of key events (the same
@ -820,29 +808,29 @@ To disable automatic clipboard synchronization, use
 To simulate "pinch-to-zoom": <kbd>Ctrl</kbd>+_click-and-move_.
-More precisely, hold down <kbd>Ctrl</kbd> while pressing the left-click button.
+More precisely, hold <kbd>Ctrl</kbd> while pressing the left-click button. Until
-Until the left-click button is released, all mouse movements scale and rotate
+the left-click button is released, all mouse movements scale and rotate the
-the content (if supported by the app) relative to the center of the screen.
+content (if supported by the app) relative to the center of the screen.
-Technically, _scrcpy_ generates additional touch events from a "virtual finger"
+Concretely, scrcpy generates additional touch events from a "virtual finger" at
-at a location inverted through the center of the screen.
+a location inverted through the center of the screen.
 #### Physical keyboard simulation (HID)
-By default, _scrcpy_ uses Android key or text injection: it works everywhere,
+By default, scrcpy uses Android key or text injection: it works everywhere, but
-but is limited to ASCII.
+is limited to ASCII.
-Alternatively, `scrcpy` can simulate a physical USB keyboard on Android to
+Alternatively, scrcpy can simulate a physical USB keyboard on Android to provide
-provide a better input experience (using [USB HID over AOAv2][hid-aoav2]): the
+a better input experience (using [USB HID over AOAv2][hid-aoav2]): the virtual
-virtual keyboard is disabled and it works for all characters and IME.
+keyboard is disabled and it works for all characters and IME.
 [hid-aoav2]: https://source.android.com/devices/accessories/aoa2#hid-support
-However, it only works if the device is connected via USB.
+However, it only works if the device is connected by USB.
 Note: On Windows, it may only work in [OTG mode](#otg), not while mirroring (it
 is not possible to open a USB device if it is already open by another process
-like the _adb daemon_).
+like the adb daemon).
 To enable this mode:
@ -853,7 +841,7 @@ scrcpy -K  # short version
 If it fails for some reason (for example because the device is not connected via
 USB), it automatically fallbacks to the default mode (with a log in the
-console). This allows using the same command line options when connected over
+console). This allows to use the same command line options when connected over
 USB and TCP/IP.
 In this mode, raw key events (scancodes) are sent to the device, independently
@ -877,7 +865,7 @@ a physical keyboard is connected).
 Similarly to the physical keyboard simulation, it is possible to simulate a
 physical mouse. Likewise, it only works if the device is connected by USB.
-By default, _scrcpy_ uses Android mouse events injection with absolute
+By default, scrcpy uses Android mouse events injection, using absolute
 coordinates. By simulating a physical mouse, a mouse pointer appears on the
 Android device, and relative mouse motion, clicks and scrolls are injected.
@ -888,7 +876,7 @@ scrcpy --hid-mouse
 scrcpy -M  # short version
 ```
-You can also add `--forward-all-clicks` to [forward all mouse
+You could also add `--forward-all-clicks` to [forward all mouse
 buttons][forward_all_clicks].
 [forward_all_clicks]: #right-click-and-middle-click
@ -907,7 +895,7 @@ It is possible to run _scrcpy_ with only physical keyboard and mouse simulation
 (HID), as if the computer keyboard and mouse were plugged directly to the device
 via an OTG cable.
-In this mode, `adb` (USB debugging) is not necessary, and mirroring is disabled.
+In this mode, _adb_ (USB debugging) is not necessary, and mirroring is disabled.
 To enable OTG mode:
@ -933,7 +921,7 @@ connected by USB.
 #### Text injection preference
-Two kinds of [events][textevents] are generated when typing text:
+There are two kinds of [events][textevents] generated when typing text:
 - _key events_, signaling that a key is pressed or released;
 - _text events_, signaling that a text has been entered.
@ -1077,7 +1065,7 @@ _³4th and 5th mouse buttons, if your mouse has them._
 _⁴For react-native apps in development, `MENU` triggers development menu._  
 _⁵Only on Android >= 7._
-Shortcuts with repeated keys are executed by releasing and pressing the key a
+Shortcuts with repeated keys are executted by releasing and pressing the key a
 second time. For example, to execute "Expand settings panel":
 1. Press and keep pressing <kbd>MOD</kbd>.
@ -1090,7 +1078,7 @@ handled by the active application.
 ## Custom paths
-To use a specific `adb` binary, configure its path in the environment variable
+To use a specific _adb_ binary, configure its path in the environment variable
 `ADB`:
 ```bash
@ -1103,7 +1091,7 @@ To override the path of the `scrcpy-server` file, configure its path in
 To override the icon, configure its path in `SCRCPY_ICON_PATH`.
-## Why the name _scrcpy_?
+## Why _scrcpy_?
 A colleague challenged me to find a name as unpronounceable as [gnirehtet].
@ -1120,7 +1108,7 @@ See [BUILD].
 ## Common issues
-See the [FAQ].
+See the [FAQ].md).
 [FAQ]: FAQ.md
@ -1163,7 +1151,7 @@ If you encounter a bug, please read the [FAQ] first, then open an [issue].
 [issue]: https://github.com/Genymobile/scrcpy/issues
-For general questions or discussions, you can also use:
+For general questions or discussions, you could also use:
 - Reddit: [`r/scrcpy`](https://www.reddit.com/r/scrcpy)
 - Twitter: [`@scrcpy_app`](https://twitter.com/scrcpy_app)
@ -1174,7 +1162,7 @@ This README is available in other languages:
 - [Deutsch (German, `de`) - v1.22](README.de.md)
 - [Indonesian (Indonesia, `id`) - v1.16](README.id.md)
- [Italiano (Italiano, `it`) - v1.23](README.it.md)
+- [Italiano (Italiano, `it`) - v1.19](README.it.md)
 - [日本語 (Japanese, `jp`) - v1.19](README.jp.md)
 - [한국어 (Korean, `ko`) - v1.11](README.ko.md)
 - [Português Brasileiro (Brazilian Portuguese, `pt-BR`) - v1.19](README.pt-br.md)
--- a/README.zh-Hans.md
+++ b/README.zh-Hans.md
@ -704,11 +704,11 @@ scrcpy --disable-screensaver
 #### 双指缩放
-模拟“双指缩放”：<kbd>Ctrl</kbd>+_按下并拖动鼠标_。
+模拟“双指缩放”：<kbd>Ctrl</kbd>+_按住并移动鼠标_。
-在按住 <kbd>Ctrl</kbd> 时按下鼠标左键，直到松开鼠标左键前，移动鼠标会使屏幕内容相对于屏幕中心进行缩放或旋转 (如果应用支持)。
+更准确的说，在按住鼠标左键时按住 <kbd>Ctrl</kbd>。直到松开鼠标左键，所有鼠标移动将以屏幕中心为原点，缩放或旋转内容 (如果应用支持)。
-具体来说，_scrcpy_ 会在鼠标位置，以及鼠标以屏幕中心镜像的位置分别生成触摸事件。
+实际上，_scrcpy_ 会在关于屏幕中心对称的位置上用“虚拟手指”发出触摸事件。
 #### 物理键盘模拟 (HID)
--- a/app/data/bash-completion/scrcpy
+++ b/app/data/bash-completion/scrcpy
@ -29,7 +29,6 @@ _scrcpy() {
        -N --no-display
        --no-key-repeat
        --no-mipmaps
        --no-power-on
        --otg
        -p --port=
        --power-off-on-close
--- a/app/data/zsh-completion/_scrcpy
+++ b/app/data/zsh-completion/_scrcpy
@ -35,7 +35,6 @@ arguments=(
    {-N,--no-display}'[Do not display device \(during screen recording or when V4L2 sink is enabled\)]'
    '--no-key-repeat[Do not forward repeated key events when a key is held down]'
    '--no-mipmaps[Disable the generation of mipmaps]'
    '--no-power-on[Do not power on the device on start]'
    '--otg[Run in OTG mode \(simulating physical keyboard and mouse\)]'
    {-p,--port=}'[\[port\[\:port\]\] Set the TCP port \(range\) used by the client to listen]'
    '--power-off-on-close[Turn the device screen off when closing scrcpy]'
--- a/app/meson.build
+++ b/app/meson.build
@ -143,12 +143,12 @@ else
    prebuilt_libusb = meson.get_cross_property('prebuilt_libusb')
    prebuilt_libusb_root = meson.get_cross_property('prebuilt_libusb_root')
-    libusb_bin_dir = meson.current_source_dir() + '/prebuilt-deps/data/' + prebuilt_libusb
+    libusb_bin_dir = meson.current_source_dir() + '/prebuilt-deps/data/' + prebuilt_libusb + '/dll'
    libusb_include_dir = 'prebuilt-deps/data/' + prebuilt_libusb_root + '/include'
    libusb = declare_dependency(
        dependencies: [
-            cc.find_library('msys-usb-1.0', dirs: libusb_bin_dir),
+            cc.find_library('libusb-1.0', dirs: libusb_bin_dir),
        ],
        include_directories: include_directories(libusb_include_dir)
    )
--- a/app/prebuilt-deps/prepare-adb.sh
+++ b/app/prebuilt-deps/prepare-adb.sh
@ -6,10 +6,10 @@ cd "$DIR"
 mkdir -p "$PREBUILT_DATA_DIR"
 cd "$PREBUILT_DATA_DIR"
-DEP_DIR=platform-tools-33.0.1
+DEP_DIR=platform-tools-31.0.3
-FILENAME=platform-tools_r33.0.1-windows.zip
+FILENAME=platform-tools_r31.0.3-windows.zip
-SHA256SUM=c1f02d42ea24ef4ff2a405ae7370e764ef4546f9b3e4520f5571a00ed5012c42
+SHA256SUM=0f4b8fdd26af2c3733539d6eebb3c2ed499ea1d4bb1f4e0ecc2d6016961a6e24
 if [[ -d "$DEP_DIR" ]]
 then
--- a/app/prebuilt-deps/prepare-ffmpeg-win64.sh
+++ b/app/prebuilt-deps/prepare-ffmpeg-win64.sh
@ -6,11 +6,10 @@ cd "$DIR"
 mkdir -p "$PREBUILT_DATA_DIR"
 cd "$PREBUILT_DATA_DIR"
-VERSION=5.0.1
+DEP_DIR=ffmpeg-win64-5.0
 DEP_DIR=ffmpeg-win64-$VERSION
-FILENAME=ffmpeg-$VERSION-full_build-shared.7z
+FILENAME=ffmpeg-5.0-full_build-shared.7z
-SHA256SUM=ded28435b6f04b74f5ef5a6a13761233bce9e8e9f8ecb0eabe936fd36a778b0c
+SHA256SUM=e5900f6cecd4c438d398bd2fc308736c10b857cd8dd61c11bcfb05bff5d1211a
 if [[ -d "$DEP_DIR" ]]
 then
@ -18,13 +17,13 @@ then
    exit 0
 fi
-get_file "https://github.com/GyanD/codexffmpeg/releases/download/$VERSION/$FILENAME" \
+get_file "https://github.com/GyanD/codexffmpeg/releases/download/5.0/$FILENAME" \
    "$FILENAME" "$SHA256SUM"
 mkdir "$DEP_DIR"
 cd "$DEP_DIR"
-ZIP_PREFIX=ffmpeg-$VERSION-full_build-shared
+ZIP_PREFIX=ffmpeg-5.0-full_build-shared
 7z x "../$FILENAME" \
    "$ZIP_PREFIX"/bin/avutil-57.dll \
    "$ZIP_PREFIX"/bin/avcodec-59.dll \
--- a/app/prebuilt-deps/prepare-libusb.sh
+++ b/app/prebuilt-deps/prepare-libusb.sh
@ -6,10 +6,10 @@ cd "$DIR"
 mkdir -p "$PREBUILT_DATA_DIR"
 cd "$PREBUILT_DATA_DIR"
-DEP_DIR=libusb-1.0.26
+DEP_DIR=libusb-1.0.25
-FILENAME=libusb-1.0.26-binaries.7z
+FILENAME=libusb-1.0.25.7z
-SHA256SUM=9c242696342dbde9cdc47239391f71833939bf9f7aa2bbb28cdaabe890465ec5
+SHA256SUM=3d1c98416f454026034b2b5d67f8a294053898cb70a8b489874e75b136c6674d
 if [[ -d "$DEP_DIR" ]]
 then
@ -17,18 +17,12 @@ then
    exit 0
 fi
-get_file "https://github.com/libusb/libusb/releases/download/v1.0.26/$FILENAME" "$FILENAME" "$SHA256SUM"
+get_file "https://github.com/libusb/libusb/releases/download/v1.0.25/$FILENAME" "$FILENAME" "$SHA256SUM"
 mkdir "$DEP_DIR"
 cd "$DEP_DIR"
 # include/ is the same in all folders of the archive
 7z x "../$FILENAME" \
-    libusb-1.0.26-binaries/libusb-MinGW-Win32/bin/msys-usb-1.0.dll \
+    MinGW32/dll/libusb-1.0.dll \
-    libusb-1.0.26-binaries/libusb-MinGW-x64/bin/msys-usb-1.0.dll \
+    MinGW64/dll/libusb-1.0.dll \
-    libusb-1.0.26-binaries/libusb-MinGW-x64/include/
+    include /
 mv libusb-1.0.26-binaries/libusb-MinGW-Win32/bin MinGW-Win32
 mv libusb-1.0.26-binaries/libusb-MinGW-x64/bin MinGW-x64
 mv libusb-1.0.26-binaries/libusb-MinGW-x64/include .
 rm -rf libusb-1.0.26-binaries
--- a/app/prebuilt-deps/prepare-sdl.sh
+++ b/app/prebuilt-deps/prepare-sdl.sh
@ -6,10 +6,10 @@ cd "$DIR"
 mkdir -p "$PREBUILT_DATA_DIR"
 cd "$PREBUILT_DATA_DIR"
-DEP_DIR=SDL2-2.0.22
+DEP_DIR=SDL2-2.0.20
-FILENAME=SDL2-devel-2.0.22-mingw.tar.gz
+FILENAME=SDL2-devel-2.0.20-mingw.tar.gz
-SHA256SUM=0e91e35973366aa1e6f81ee368924d9b4f93f9da4d2f2a89ec80b06eadcf23d1
+SHA256SUM=38094d82a857d6c62352e5c5cdec74948c5b4d25c59cbd298d6d233568976bd1
 if [[ -d "$DEP_DIR" ]]
 then
--- a/app/scrcpy-windows.rc
+++ b/app/scrcpy-windows.rc
@ -13,7 +13,7 @@ BEGIN
      VALUE "LegalCopyright", "Romain Vimont, Genymobile"
      VALUE "OriginalFilename", "scrcpy.exe"
      VALUE "ProductName", "scrcpy"
-      VALUE "ProductVersion", "1.24"
+      VALUE "ProductVersion", "1.23"
    END
  END
  BLOCK "VarFileInfo"
--- a/app/scrcpy.1
+++ b/app/scrcpy.1
@ -180,10 +180,6 @@ Do not forward repeated key events when a key is held down.
 .B \-\-no\-mipmaps
 If the renderer is OpenGL 3.0+ or OpenGL ES 2.0+, then mipmaps are automatically generated to improve downscaling quality. This option disables the generation of mipmaps.
 .TP
 .B \-\-no\-power\-on
 Do not power on the device on start.
 .TP
 .B \-\-otg
 Run in OTG mode: simulate physical keyboard and mouse, as if the computer keyboard and mouse were plugged directly to the device via an OTG cable.
--- a/app/src/adb/adb.c
+++ b/app/src/adb/adb.c
@ -401,7 +401,6 @@ sc_adb_list_devices(struct sc_intr *intr, unsigned flags,
 #define BUFSIZE 65536
    char *buf = malloc(BUFSIZE);
    if (!buf) {
        LOG_OOM();
        return false;
    }
@ -711,5 +710,5 @@ sc_adb_get_device_ip(struct sc_intr *intr, const char *serial, unsigned flags) {
    // It is parsed as a NUL-terminated string
    buf[r] = '\0';
-    return sc_adb_parse_device_ip(buf);
+    return sc_adb_parse_device_ip_from_output(buf);
 }
--- a/app/src/adb/adb_parser.c
+++ b/app/src/adb/adb_parser.c
@ -199,7 +199,7 @@ sc_adb_parse_device_ip_from_line(char *line) {
 }
 char *
-sc_adb_parse_device_ip(char *str) {
+sc_adb_parse_device_ip_from_output(char *str) {
    size_t idx_line = 0;
    while (str[idx_line] != '\0') {
        char *line = &str[idx_line];
--- a/app/src/adb/adb_parser.h
+++ b/app/src/adb/adb_parser.h
@ -25,6 +25,6 @@ sc_adb_parse_devices(char *str, struct sc_vec_adb_devices *out_vec);
 * Warning: this function modifies the buffer for optimization purposes.
 */
 char *
-sc_adb_parse_device_ip(char *str);
+sc_adb_parse_device_ip_from_output(char *str);
 #endif
--- a/app/src/cli.c
+++ b/app/src/cli.c
@ -56,7 +56,6 @@
 #define OPT_OTG                    1036
 #define OPT_NO_CLEANUP             1037
 #define OPT_PRINT_FPS              1038
 #define OPT_NO_POWER_ON            1039
 struct sc_option {
    char shortopt;
@ -303,11 +302,6 @@ static const struct sc_option options[] = {
                "mipmaps are automatically generated to improve downscaling "
                "quality. This option disables the generation of mipmaps.",
    },
    {
        .longopt_id = OPT_NO_POWER_ON,
        .longopt = "no-power-on",
        .text = "Do not power on the device on start.",
    },
    {
        .longopt_id = OPT_OTG,
        .longopt = "otg",
@ -583,7 +577,7 @@ static const struct sc_shortcut shortcuts[] = {
        .text = "Click on BACK",
    },
    {
-        .shortcuts = { "MOD+s", "4th-click" },
+        .shortcuts = { "MOD+s" },
        .text = "Click on APP_SWITCH",
    },
    {
@ -619,7 +613,7 @@ static const struct sc_shortcut shortcuts[] = {
        .text = "Rotate device screen",
    },
    {
-        .shortcuts = { "MOD+n", "5th-click" },
+        .shortcuts = { "MOD+n" },
        .text = "Expand notification panel",
    },
    {
@ -1604,9 +1598,6 @@ parse_args_with_getopt(struct scrcpy_cli_args *args, int argc, char *argv[],
            case OPT_NO_CLEANUP:
                opts->cleanup = false;
                break;
            case OPT_NO_POWER_ON:
                opts->power_on = false;
                break;
            case OPT_PRINT_FPS:
                opts->start_fps_counter = true;
                break;
--- a/app/src/clock.c
+++ b/app/src/clock.c
@ -98,7 +98,7 @@ sc_clock_update(struct sc_clock *clock, sc_tick system, sc_tick stream) {
        sc_clock_estimate(clock, &clock->slope, &clock->offset);
 #ifndef SC_CLOCK_NDEBUG
-        LOGD("Clock estimation: %f * pts + %" PRItick,
+        LOGD("Clock estimation: %g * pts + %" PRItick,
             clock->slope, clock->offset);
 #endif
    }
--- a/app/src/control_msg.c
+++ b/app/src/control_msg.c
@ -170,7 +170,7 @@ sc_control_msg_log(const struct sc_control_msg *msg) {
            if (id == POINTER_ID_MOUSE || id == POINTER_ID_VIRTUAL_FINGER) {
                // string pointer id
                LOG_CMSG("touch [id=%s] %-4s position=%" PRIi32 ",%" PRIi32
-                             " pressure=%f buttons=%06lx",
+                             " pressure=%g buttons=%06lx",
                         id == POINTER_ID_MOUSE ? "mouse" : "vfinger",
                         MOTIONEVENT_ACTION_LABEL(action),
                         msg->inject_touch_event.position.point.x,
@ -180,7 +180,7 @@ sc_control_msg_log(const struct sc_control_msg *msg) {
            } else {
                // numeric pointer id
                LOG_CMSG("touch [id=%" PRIu64_ "] %-4s position=%" PRIi32 ",%"
-                             PRIi32 " pressure=%f buttons=%06lx",
+                             PRIi32 " pressure=%g buttons=%06lx",
                         id,
                         MOTIONEVENT_ACTION_LABEL(action),
                         msg->inject_touch_event.position.point.x,
--- a/app/src/demuxer.c
+++ b/app/src/demuxer.c
@ -37,8 +37,8 @@ sc_demuxer_recv_packet(struct sc_demuxer *demuxer, AVPacket *packet) {
    // CK...... ........ ........ ........ ........ ........ ........ ........
    // ^^<------------------------------------------------------------------->
    // ||                                PTS
-    // | `- key frame
+    // | `- config packet
-    //  `-- config packet
+    //  `-- key frame
    uint8_t header[SC_PACKET_HEADER_SIZE];
    ssize_t r = net_recv_all(demuxer->socket, header, SC_PACKET_HEADER_SIZE);
--- a/app/src/options.c
+++ b/app/src/options.c
@ -64,5 +64,4 @@ const struct scrcpy_options scrcpy_options_default = {
    .select_usb = false,
    .cleanup = true,
    .start_fps_counter = false,
    .power_on = true,
 };
--- a/app/src/options.h
+++ b/app/src/options.h
@ -139,7 +139,6 @@ struct scrcpy_options {
    bool select_tcpip;
    bool cleanup;
    bool start_fps_counter;
    bool power_on;
 };
 extern const struct scrcpy_options scrcpy_options_default;
--- a/app/src/scrcpy.c
+++ b/app/src/scrcpy.c
@ -324,7 +324,6 @@ scrcpy(struct scrcpy_options *options) {
        .tcpip = options->tcpip,
        .tcpip_dst = options->tcpip_dst,
        .cleanup = options->cleanup,
        .power_on = options->power_on,
    };
    static const struct sc_server_callbacks cbs = {
--- a/app/src/server.c
+++ b/app/src/server.c
@ -248,10 +248,6 @@ execute_server(struct sc_server *server,
        // By default, cleanup is true
        ADD_PARAM("cleanup=false");
    }
    if (!params->power_on) {
        // By default, power_on is true
        ADD_PARAM("power_on=false");
    }
 #undef ADD_PARAM
--- a/app/src/server.h
+++ b/app/src/server.h
@ -47,7 +47,6 @@ struct sc_server_params {
    bool select_usb;
    bool select_tcpip;
    bool cleanup;
    bool power_on;
 };
 struct sc_server {
--- a/app/src/stream.h
+++ b/app/src/stream.h
@ -0,0 +1,51 @@
 #ifndef STREAM_H
 #define STREAM_H
 #include "common.h"
 #include <stdbool.h>
 #include <stdint.h>
 #include <libavcodec/avcodec.h>
 #include <libavformat/avformat.h>
 #include "trait/packet_sink.h"
 #include "util/net.h"
 #include "util/thread.h"
 #define STREAM_MAX_SINKS 2
 struct stream {
    sc_socket socket;
    sc_thread thread;
    struct sc_packet_sink *sinks[STREAM_MAX_SINKS];
    unsigned sink_count;
    AVCodecContext *codec_ctx;
    AVCodecParserContext *parser;
    // successive packets may need to be concatenated, until a non-config
    // packet is available
    AVPacket *pending;
    const struct stream_callbacks *cbs;
    void *cbs_userdata;
 };
 struct stream_callbacks {
    void (*on_eos)(struct stream *stream, void *userdata);
 };
 void
 stream_init(struct stream *stream, sc_socket socket,
            const struct stream_callbacks *cbs, void *cbs_userdata);
 void
 stream_add_sink(struct stream *stream, struct sc_packet_sink *sink);
 bool
 stream_start(struct stream *stream);
 void
 stream_join(struct stream *stream);
 #endif
--- a/app/src/usb/scrcpy_otg.c
+++ b/app/src/usb/scrcpy_otg.c
@ -55,10 +55,6 @@ scrcpy_otg(struct scrcpy_options *options) {
    const char *serial = options->serial;
    if (!SDL_SetHint(SDL_HINT_RENDER_SCALE_QUALITY, "1")) {
        LOGW("Could not enable linear filtering");
    }
    // Minimal SDL initialization
    if (SDL_Init(SDL_INIT_EVENTS)) {
        LOGE("Could not initialize SDL: %s", SDL_GetError());
@ -166,8 +162,6 @@ scrcpy_otg(struct scrcpy_options *options) {
        .always_on_top = options->always_on_top,
        .window_x = options->window_x,
        .window_y = options->window_y,
        .window_width = options->window_width,
        .window_height = options->window_height,
        .window_borderless = options->window_borderless,
    };
--- a/app/src/usb/screen_otg.c
+++ b/app/src/usb/screen_otg.c
@ -69,10 +69,10 @@ sc_screen_otg_init(struct sc_screen_otg *screen,
          ? params->window_x : (int) SDL_WINDOWPOS_UNDEFINED;
    int y = params->window_y != SC_WINDOW_POSITION_UNDEFINED
          ? params->window_y : (int) SDL_WINDOWPOS_UNDEFINED;
-    int width = params->window_width ? params->window_width : 256;
+    int width = 256;
-    int height = params->window_height ? params->window_height : 256;
+    int height = 256;
-    uint32_t window_flags = SDL_WINDOW_ALLOW_HIGHDPI;
+    uint32_t window_flags = 0;
    if (params->always_on_top) {
        window_flags |= SDL_WINDOW_ALWAYS_ON_TOP;
    }
@ -97,11 +97,6 @@ sc_screen_otg_init(struct sc_screen_otg *screen,
    if (icon) {
        SDL_SetWindowIcon(screen->window, icon);
        if (SDL_RenderSetLogicalSize(screen->renderer, icon->w, icon->h)) {
            LOGW("Could not set renderer logical size: %s", SDL_GetError());
            // don't fail
        }
        screen->texture = SDL_CreateTextureFromSurface(screen->renderer, icon);
        scrcpy_icon_destroy(icon);
        if (!screen->texture) {
--- a/app/src/usb/screen_otg.h
+++ b/app/src/usb/screen_otg.h
@ -29,8 +29,6 @@ struct sc_screen_otg_params {
    bool always_on_top;
    int16_t window_x; // accepts SC_WINDOW_POSITION_UNDEFINED
    int16_t window_y; // accepts SC_WINDOW_POSITION_UNDEFINED
    uint16_t window_width;
    uint16_t window_height;
    bool window_borderless;
 };
--- a/app/src/usb/usb.c
+++ b/app/src/usb/usb.c
@ -23,11 +23,6 @@ read_string(libusb_device_handle *handle, uint8_t desc_index) {
    // When non-negative, 'result' contains the number of bytes written
    char *s = malloc(result + 1);
    if (!s) {
        LOG_OOM();
        return NULL;
    }
    memcpy(s, buffer, result);
    s[result] = '\0';
    return s;
--- a/app/src/util/net.c
+++ b/app/src/util/net.c
@ -3,10 +3,11 @@
 #include <assert.h>
 #include <errno.h>
 #include <stdio.h>
 #include <SDL2/SDL_platform.h>
 #include "log.h"
-#ifdef _WIN32
+#ifdef __WINDOWS__
 # include <ws2tcpip.h>
  typedef int socklen_t;
  typedef SOCKET sc_raw_socket;
@ -28,7 +29,7 @@
 bool
 net_init(void) {
-#ifdef _WIN32
+#ifdef __WINDOWS__
    WSADATA wsa;
    int res = WSAStartup(MAKEWORD(2, 2), &wsa) < 0;
    if (res < 0) {
@ -41,14 +42,14 @@ net_init(void) {
 void
 net_cleanup(void) {
-#ifdef _WIN32
+#ifdef __WINDOWS__
    WSACleanup();
 #endif
 }
 static inline sc_socket
 wrap(sc_raw_socket sock) {
-#ifdef _WIN32
+#ifdef __WINDOWS__
    if (sock == INVALID_SOCKET) {
        return SC_SOCKET_NONE;
    }
@ -71,7 +72,7 @@ wrap(sc_raw_socket sock) {
 static inline sc_raw_socket
 unwrap(sc_socket socket) {
-#ifdef _WIN32
+#ifdef __WINDOWS__
    if (socket == SC_SOCKET_NONE) {
        return INVALID_SOCKET;
    }
@ -247,7 +248,7 @@ net_interrupt(sc_socket socket) {
    sc_raw_socket raw_sock = unwrap(socket);
-#ifdef _WIN32
+#ifdef __WINDOWS__
    if (!atomic_flag_test_and_set(&socket->closed)) {
        return !closesocket(raw_sock);
    }
@ -261,7 +262,7 @@ bool
 net_close(sc_socket socket) {
    sc_raw_socket raw_sock = unwrap(socket);
-#ifdef _WIN32
+#ifdef __WINDOWS__
    bool ret = true;
    if (!atomic_flag_test_and_set(&socket->closed)) {
        ret = !closesocket(raw_sock);
--- a/app/src/util/net.h
+++ b/app/src/util/net.h
@ -5,8 +5,9 @@
 #include <stdbool.h>
 #include <stdint.h>
 #include <SDL2/SDL_platform.h>
-#ifdef _WIN32
+#ifdef __WINDOWS__
 # include <winsock2.h>
 # include <stdatomic.h>
@ -16,7 +17,7 @@
      atomic_flag closed;
  } *sc_socket;
-#else // not _WIN32
+#else // not __WINDOWS__
 # include <sys/socket.h>
 # define SC_SOCKET_NONE -1
--- a/app/tests/test_adb_parser.c
+++ b/app/tests/test_adb_parser.c
@ -5,7 +5,7 @@
 #include "adb/adb_device.h"
 #include "adb/adb_parser.h"
-static void test_adb_devices(void) {
+static void test_adb_devices() {
    char output[] =
        "List of devices attached\n"
        "0123456789abcdef	device usb:2-1 product:MyProduct model:MyModel "
@ -31,7 +31,7 @@ static void test_adb_devices(void) {
    sc_adb_devices_destroy(&vec);
 }
-static void test_adb_devices_cr(void) {
+static void test_adb_devices_cr() {
    char output[] =
        "List of devices attached\r\n"
        "0123456789abcdef	device usb:2-1 product:MyProduct model:MyModel "
@ -57,7 +57,7 @@ static void test_adb_devices_cr(void) {
    sc_adb_devices_destroy(&vec);
 }
-static void test_adb_devices_daemon_start(void) {
+static void test_adb_devices_daemon_start() {
    char output[] =
        "* daemon not running; starting now at tcp:5037\n"
        "* daemon started successfully\n"
@ -78,7 +78,7 @@ static void test_adb_devices_daemon_start(void) {
    sc_adb_devices_destroy(&vec);
 }
-static void test_adb_devices_daemon_start_mixed(void) {
+static void test_adb_devices_daemon_start_mixed() {
    char output[] =
        "List of devices attached\n"
        "adb server version (41) doesn't match this client (39); killing...\n"
@ -105,7 +105,7 @@ static void test_adb_devices_daemon_start_mixed(void) {
    sc_adb_devices_destroy(&vec);
 }
-static void test_adb_devices_without_eol(void) {
+static void test_adb_devices_without_eol() {
    char output[] =
        "List of devices attached\n"
        "0123456789abcdef	device usb:2-1 product:MyProduct model:MyModel "
@ -124,7 +124,7 @@ static void test_adb_devices_without_eol(void) {
    sc_adb_devices_destroy(&vec);
 }
-static void test_adb_devices_without_header(void) {
+static void test_adb_devices_without_header() {
    char output[] =
        "0123456789abcdef	device usb:2-1 product:MyProduct model:MyModel "
            "device:MyDevice transport_id:1\n";
@ -134,7 +134,7 @@ static void test_adb_devices_without_header(void) {
    assert(!ok);
 }
-static void test_adb_devices_corrupted(void) {
+static void test_adb_devices_corrupted() {
    char output[] =
        "List of devices attached\n"
        "corrupted_garbage\n";
@ -145,7 +145,7 @@ static void test_adb_devices_corrupted(void) {
    assert(vec.size == 0);
 }
-static void test_adb_devices_spaces(void) {
+static void test_adb_devices_spaces() {
    char output[] =
        "List of devices attached\n"
        "0123456789abcdef       unauthorized usb:1-4 transport_id:3\n";
@ -163,81 +163,81 @@ static void test_adb_devices_spaces(void) {
    sc_adb_devices_destroy(&vec);
 }
-static void test_get_ip_single_line(void) {
+static void test_get_ip_single_line() {
    char ip_route[] = "192.168.1.0/24 dev wlan0  proto kernel  scope link  src "
                      "192.168.12.34\r\r\n";
-    char *ip = sc_adb_parse_device_ip(ip_route);
+    char *ip = sc_adb_parse_device_ip_from_output(ip_route);
    assert(ip);
    assert(!strcmp(ip, "192.168.12.34"));
    free(ip);
 }
-static void test_get_ip_single_line_without_eol(void) {
+static void test_get_ip_single_line_without_eol() {
    char ip_route[] = "192.168.1.0/24 dev wlan0  proto kernel  scope link  src "
                      "192.168.12.34";
-    char *ip = sc_adb_parse_device_ip(ip_route);
+    char *ip = sc_adb_parse_device_ip_from_output(ip_route);
    assert(ip);
    assert(!strcmp(ip, "192.168.12.34"));
    free(ip);
 }
-static void test_get_ip_single_line_with_trailing_space(void) {
+static void test_get_ip_single_line_with_trailing_space() {
    char ip_route[] = "192.168.1.0/24 dev wlan0  proto kernel  scope link  src "
                      "192.168.12.34 \n";
-    char *ip = sc_adb_parse_device_ip(ip_route);
+    char *ip = sc_adb_parse_device_ip_from_output(ip_route);
    assert(ip);
    assert(!strcmp(ip, "192.168.12.34"));
    free(ip);
 }
-static void test_get_ip_multiline_first_ok(void) {
+static void test_get_ip_multiline_first_ok() {
    char ip_route[] = "192.168.1.0/24 dev wlan0  proto kernel  scope link  src "
                      "192.168.1.2\r\n"
                      "10.0.0.0/24 dev rmnet  proto kernel  scope link  src "
                      "10.0.0.2\r\n";
-    char *ip = sc_adb_parse_device_ip(ip_route);
+    char *ip = sc_adb_parse_device_ip_from_output(ip_route);
    assert(ip);
    assert(!strcmp(ip, "192.168.1.2"));
    free(ip);
 }
-static void test_get_ip_multiline_second_ok(void) {
+static void test_get_ip_multiline_second_ok() {
    char ip_route[] = "10.0.0.0/24 dev rmnet  proto kernel  scope link  src "
                      "10.0.0.3\r\n"
                      "192.168.1.0/24 dev wlan0  proto kernel  scope link  src "
                      "192.168.1.3\r\n";
-    char *ip = sc_adb_parse_device_ip(ip_route);
+    char *ip = sc_adb_parse_device_ip_from_output(ip_route);
    assert(ip);
    assert(!strcmp(ip, "192.168.1.3"));
    free(ip);
 }
-static void test_get_ip_no_wlan(void) {
+static void test_get_ip_no_wlan() {
    char ip_route[] = "192.168.1.0/24 dev rmnet  proto kernel  scope link  src "
                      "192.168.12.34\r\r\n";
-    char *ip = sc_adb_parse_device_ip(ip_route);
+    char *ip = sc_adb_parse_device_ip_from_output(ip_route);
    assert(!ip);
 }
-static void test_get_ip_no_wlan_without_eol(void) {
+static void test_get_ip_no_wlan_without_eol() {
    char ip_route[] = "192.168.1.0/24 dev rmnet  proto kernel  scope link  src "
                      "192.168.12.34";
-    char *ip = sc_adb_parse_device_ip(ip_route);
+    char *ip = sc_adb_parse_device_ip_from_output(ip_route);
    assert(!ip);
 }
-static void test_get_ip_truncated(void) {
+static void test_get_ip_truncated() {
    char ip_route[] = "192.168.1.0/24 dev rmnet  proto kernel  scope link  src "
                      "\n";
-    char *ip = sc_adb_parse_device_ip(ip_route);
+    char *ip = sc_adb_parse_device_ip_from_output(ip_route);
    assert(!ip);
 }
@ -262,6 +262,4 @@ int main(int argc, char *argv[]) {
    test_get_ip_no_wlan();
    test_get_ip_no_wlan_without_eol();
    test_get_ip_truncated();
    return 0;
 }
--- a/cross_win32.txt
+++ b/cross_win32.txt
@ -20,6 +20,6 @@ ffmpeg_avcodec = 'avcodec-58'
 ffmpeg_avformat = 'avformat-58'
 ffmpeg_avutil = 'avutil-56'
 prebuilt_ffmpeg = 'ffmpeg-win32-4.3.1'
-prebuilt_sdl2 = 'SDL2-2.0.22/i686-w64-mingw32'
+prebuilt_sdl2 = 'SDL2-2.0.20/i686-w64-mingw32'
-prebuilt_libusb_root = 'libusb-1.0.26'
+prebuilt_libusb_root = 'libusb-1.0.25'
-prebuilt_libusb = prebuilt_libusb_root + '/MinGW-Win32'
+prebuilt_libusb = prebuilt_libusb_root + '/MinGW32'
--- a/cross_win64.txt
+++ b/cross_win64.txt
@ -19,7 +19,7 @@ endian = 'little'
 ffmpeg_avcodec = 'avcodec-59'
 ffmpeg_avformat = 'avformat-59'
 ffmpeg_avutil = 'avutil-57'
-prebuilt_ffmpeg = 'ffmpeg-win64-5.0.1'
+prebuilt_ffmpeg = 'ffmpeg-win64-5.0'
-prebuilt_sdl2 = 'SDL2-2.0.22/x86_64-w64-mingw32'
+prebuilt_sdl2 = 'SDL2-2.0.20/x86_64-w64-mingw32'
-prebuilt_libusb_root = 'libusb-1.0.26'
+prebuilt_libusb_root = 'libusb-1.0.25'
-prebuilt_libusb = prebuilt_libusb_root + '/MinGW-x64'
+prebuilt_libusb = prebuilt_libusb_root + '/MinGW64'
--- a/install_release.sh
+++ b/install_release.sh
@ -2,8 +2,8 @@
 set -e
 BUILDDIR=build-auto
-PREBUILT_SERVER_URL=https://github.com/Genymobile/scrcpy/releases/download/v1.24/scrcpy-server-v1.24
+PREBUILT_SERVER_URL=https://github.com/Genymobile/scrcpy/releases/download/v1.23/scrcpy-server-v1.23
-PREBUILT_SERVER_SHA256=ae74a81ea79c0dc7250e586627c278c0a9a8c5de46c9fb5c38c167fb1a36f056
+PREBUILT_SERVER_SHA256=2a913fd47478c0b306fca507cb0beb625e49a19ff9fc7ab904e36ef5b9fe7e68
 echo "[scrcpy] Downloading prebuilt server..."
 wget "$PREBUILT_SERVER_URL" -O scrcpy-server
--- a/meson.build
+++ b/meson.build
@ -1,5 +1,5 @@
 project('scrcpy', 'c',
-        version: '1.24',
+        version: '1.23',
        meson_version: '>= 0.48',
        default_options: [
            'c_std=c11',
--- a/release.mk
+++ b/release.mk
@ -75,10 +75,12 @@ prepare-deps-win64:
 	@app/prebuilt-deps/prepare-libusb.sh
 build-win32: prepare-deps-win32
 	# -Dusb=false because of libusb-win32 build issue, cf #3011
 	[ -d "$(WIN32_BUILD_DIR)" ] || ( mkdir "$(WIN32_BUILD_DIR)" && \
 		meson "$(WIN32_BUILD_DIR)" \
 			--cross-file cross_win32.txt \
 			--buildtype release --strip -Db_lto=true \
 			-Dusb=false \
 			-Dcompile_server=false \
 			-Dportable=true )
 	ninja -C "$(WIN32_BUILD_DIR)"
@ -105,11 +107,11 @@ dist-win32: build-server build-win32
 	cp app/prebuilt-deps/data/ffmpeg-win32-4.3.1/bin/avformat-58.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
 	cp app/prebuilt-deps/data/ffmpeg-win32-4.3.1/bin/swresample-3.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
 	cp app/prebuilt-deps/data/ffmpeg-win32-4.3.1/bin/swscale-5.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
-	cp app/prebuilt-deps/data/platform-tools-33.0.1/adb.exe "$(DIST)/$(WIN32_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/platform-tools-31.0.3/adb.exe "$(DIST)/$(WIN32_TARGET_DIR)/"
-	cp app/prebuilt-deps/data/platform-tools-33.0.1/AdbWinApi.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/platform-tools-31.0.3/AdbWinApi.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
-	cp app/prebuilt-deps/data/platform-tools-33.0.1/AdbWinUsbApi.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/platform-tools-31.0.3/AdbWinUsbApi.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
-	cp app/prebuilt-deps/data/SDL2-2.0.22/i686-w64-mingw32/bin/SDL2.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/SDL2-2.0.20/i686-w64-mingw32/bin/SDL2.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
-	cp app/prebuilt-deps/data/libusb-1.0.26/MinGW-Win32/msys-usb-1.0.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
+	#cp app/prebuilt-deps/data/libusb-1.0.25/MinGW32/dll/libusb-1.0.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
 dist-win64: build-server build-win64
 	mkdir -p "$(DIST)/$(WIN64_TARGET_DIR)"
@ -119,16 +121,16 @@ dist-win64: build-server build-win64
 	cp app/data/scrcpy-noconsole.vbs "$(DIST)/$(WIN64_TARGET_DIR)"
 	cp app/data/icon.png "$(DIST)/$(WIN64_TARGET_DIR)"
 	cp app/data/open_a_terminal_here.bat "$(DIST)/$(WIN64_TARGET_DIR)"
-	cp app/prebuilt-deps/data/ffmpeg-win64-5.0.1/bin/avutil-57.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/ffmpeg-win64-5.0/bin/avutil-57.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
-	cp app/prebuilt-deps/data/ffmpeg-win64-5.0.1/bin/avcodec-59.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/ffmpeg-win64-5.0/bin/avcodec-59.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
-	cp app/prebuilt-deps/data/ffmpeg-win64-5.0.1/bin/avformat-59.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/ffmpeg-win64-5.0/bin/avformat-59.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
-	cp app/prebuilt-deps/data/ffmpeg-win64-5.0.1/bin/swresample-4.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/ffmpeg-win64-5.0/bin/swresample-4.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
-	cp app/prebuilt-deps/data/ffmpeg-win64-5.0.1/bin/swscale-6.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/ffmpeg-win64-5.0/bin/swscale-6.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
-	cp app/prebuilt-deps/data/platform-tools-33.0.1/adb.exe "$(DIST)/$(WIN64_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/platform-tools-31.0.3/adb.exe "$(DIST)/$(WIN64_TARGET_DIR)/"
-	cp app/prebuilt-deps/data/platform-tools-33.0.1/AdbWinApi.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/platform-tools-31.0.3/AdbWinApi.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
-	cp app/prebuilt-deps/data/platform-tools-33.0.1/AdbWinUsbApi.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/platform-tools-31.0.3/AdbWinUsbApi.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
-	cp app/prebuilt-deps/data/SDL2-2.0.22/x86_64-w64-mingw32/bin/SDL2.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/SDL2-2.0.20/x86_64-w64-mingw32/bin/SDL2.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
-	cp app/prebuilt-deps/data/libusb-1.0.26/MinGW-x64/msys-usb-1.0.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/libusb-1.0.25/MinGW64/dll/libusb-1.0.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
 zip-win32: dist-win32
 	cd "$(DIST)/$(WIN32_TARGET_DIR)"; \
--- a/server/build.gradle
+++ b/server/build.gradle
@ -6,8 +6,8 @@ android {
        applicationId "com.genymobile.scrcpy"
        minSdkVersion 21
        targetSdkVersion 31
-        versionCode 12400
+        versionCode 12300
-        versionName "1.24"
+        versionName "1.23"
        testInstrumentationRunner "android.support.test.runner.AndroidJUnitRunner"
    }
    buildTypes {
@ -19,6 +19,7 @@ android {
 }
 dependencies {
    implementation fileTree(dir: 'libs', include: ['*.jar'])
    testImplementation 'junit:junit:4.13.1'
 }
--- a/server/build_without_gradle.sh
+++ b/server/build_without_gradle.sh
@ -12,7 +12,7 @@
 set -e
 SCRCPY_DEBUG=false
-SCRCPY_VERSION_NAME=1.24
+SCRCPY_VERSION_NAME=1.23
 PLATFORM=${ANDROID_PLATFORM:-31}
 BUILD_TOOLS=${ANDROID_BUILD_TOOLS:-31.0.0}
--- a/server/src/main/java/com/genymobile/scrcpy/Controller.java
+++ b/server/src/main/java/com/genymobile/scrcpy/Controller.java
@ -22,7 +22,6 @@ public class Controller {
    private final DesktopConnection connection;
    private final DeviceMessageSender sender;
    private final boolean clipboardAutosync;
    private final boolean powerOn;
    private final KeyCharacterMap charMap = KeyCharacterMap.load(KeyCharacterMap.VIRTUAL_KEYBOARD);
@ -33,11 +32,10 @@ public class Controller {
    private boolean keepPowerModeOff;
-    public Controller(Device device, DesktopConnection connection, boolean clipboardAutosync, boolean powerOn) {
+    public Controller(Device device, DesktopConnection connection, boolean clipboardAutosync) {
        this.device = device;
        this.connection = connection;
        this.clipboardAutosync = clipboardAutosync;
        this.powerOn = powerOn;
        initPointers();
        sender = new DeviceMessageSender(connection);
    }
@ -58,7 +56,7 @@ public class Controller {
    public void control() throws IOException {
        // on start, power on the device
-        if (powerOn && !Device.isScreenOn()) {
+        if (!Device.isScreenOn()) {
            device.pressReleaseKeycode(KeyEvent.KEYCODE_POWER, Device.INJECT_MODE_ASYNC);
            // dirty hack
--- a/server/src/main/java/com/genymobile/scrcpy/Options.java
+++ b/server/src/main/java/com/genymobile/scrcpy/Options.java
@ -22,7 +22,6 @@ public class Options {
    private boolean clipboardAutosync = true;
    private boolean downsizeOnError = true;
    private boolean cleanup = true;
    private boolean powerOn = true;
    // Options not used by the scrcpy client, but useful to use scrcpy-server directly
    private boolean sendDeviceMeta = true; // send device name and size
@ -165,14 +164,6 @@ public class Options {
        this.cleanup = cleanup;
    }
    public boolean getPowerOn() {
        return powerOn;
    }
    public void setPowerOn(boolean powerOn) {
        this.powerOn = powerOn;
    }
    public boolean getSendDeviceMeta() {
        return sendDeviceMeta;
    }
--- a/server/src/main/java/com/genymobile/scrcpy/Server.java
+++ b/server/src/main/java/com/genymobile/scrcpy/Server.java
@ -82,7 +82,7 @@ public final class Server {
            Thread controllerThread = null;
            Thread deviceMessageSenderThread = null;
            if (control) {
-                final Controller controller = new Controller(device, connection, options.getClipboardAutosync(), options.getPowerOn());
+                final Controller controller = new Controller(device, connection, options.getClipboardAutosync());
                // asynchronous
                controllerThread = startController(controller);
@ -248,10 +248,6 @@ public final class Server {
                    boolean cleanup = Boolean.parseBoolean(value);
                    options.setCleanup(cleanup);
                    break;
                case "power_on":
                    boolean powerOn = Boolean.parseBoolean(value);
                    options.setPowerOn(powerOn);
                    break;
                case "send_device_meta":
                    boolean sendDeviceMeta = Boolean.parseBoolean(value);
                    options.setSendDeviceMeta(sendDeviceMeta);
--- a/server/src/main/java/com/genymobile/scrcpy/wrappers/InputManager.java
+++ b/server/src/main/java/com/genymobile/scrcpy/wrappers/InputManager.java
@ -2,6 +2,7 @@ package com.genymobile.scrcpy.wrappers;
 import com.genymobile.scrcpy.Ln;
 import android.os.IInterface;
 import android.view.InputEvent;
 import java.lang.reflect.InvocationTargetException;