Use --pause-on-exit from launchers

The terminal opened by scrcpy-console (.bat or .desktop) must not close
if scrcpy terminates with an error, so that error messages can be read.

Refs #3817 <https://github.com/Genymobile/scrcpy/pull/3817>
Refs #3822 <https://github.com/Genymobile/scrcpy/pull/3822>
PR #4130 <https://github.com/Genymobile/scrcpy/pull/4130>

FAQ.md

@@ -159,6 +159,8 @@ In developer options, enable:
 > **USB debugging (Security settings)**  
 > _Allow granting permissions and simulating input via USB debugging_
 
+Rebooting the device is necessary once this option is set.
+
 [simulating input]: https://github.com/Genymobile/scrcpy/issues/70#issuecomment-373286323
 
 
@@ -168,12 +170,12 @@ The default text injection method is [limited to ASCII characters][text-input].
 A trick allows to also inject some [accented characters][accented-characters],
 but that's all. See [#37].
 
-Since scrcpy v1.20, it is possible to simulate a [physical keyboard][hid] (HID).
+It is also possible to simulate a [physical keyboard][hid] (HID).
 
 [text-input]: https://github.com/Genymobile/scrcpy/issues?q=is%3Aopen+is%3Aissue+label%3Aunicode
 [accented-characters]: https://blog.rom1v.com/2018/03/introducing-scrcpy/#handle-accented-characters
 [#37]: https://github.com/Genymobile/scrcpy/issues/37
-[hid]: README.md#physical-keyboard-simulation-hid
+[hid]: doc/hid-otg.md
 
 
 ## Client issues
@@ -229,4 +231,4 @@ Translations of this FAQ in other languages are available in the [wiki].
 
 [wiki]: https://github.com/Genymobile/scrcpy/wiki
 
-Only this README file is guaranteed to be up-to-date.
+Only this FAQ file is guaranteed to be up-to-date.

README.md

@@ -1,11 +1,11 @@
-# scrcpy (v2.0)
+# scrcpy (v2.1.1)
 
 <img src="app/data/icon.svg" width="128" height="128" alt="scrcpy" align="right" />
 
 _pronounced "**scr**een **c**o**py**"_
 
 This application mirrors Android devices (video and audio) connected via
-USB or [over TCP/IP](doc/device.md#tcpip-wireless), and allows to control the
+USB or [over TCP/IP](doc/connection.md#tcpip-wireless), and allows to control the
 device with the keyboard and the mouse of the computer. It does not require any
 _root_ access. It works on _Linux_, _Windows_ and _macOS_.
 
@@ -30,7 +30,7 @@ Its features include:
  - mirroring with [Android device screen off](doc/device.md#turn-screen-off)
  - [copy-paste](doc/control.md#copy-paste) in both directions
  - [configurable quality](doc/video.md)
- - Android device [as a webcam (V4L2)](doc/v4l2.md) (Linux-only)
+ - Android device screen [as a webcam (V4L2)](doc/v4l2.md) (Linux-only)
  - [physical keyboard/mouse simulation (HID)](doc/hid-otg.md)
  - [OTG mode](doc/hid-otg.md#otg)
  - and more…
@@ -39,7 +39,7 @@ Its features include:
 
 The Android device requires at least API 21 (Android 5.0).
 
-[Audio forwarding](doc/audio.md) is supported from API 30 (Android 11).
+[Audio forwarding](doc/audio.md) is supported for API >= 30 (Android 11+).
 
 Make sure you [enabled USB debugging][enable-adb] on your device(s).
 
@@ -47,10 +47,14 @@ Make sure you [enabled USB debugging][enable-adb] on your device(s).
 
 On some devices, you also need to enable [an additional option][control] `USB
 debugging (Security Settings)` (this is an item different from `USB debugging`)
-to control it using a keyboard and mouse.
+to control it using a keyboard and mouse. Rebooting the device is necessary once
+this option is set.
 
 [control]: https://github.com/Genymobile/scrcpy/issues/70#issuecomment-373286323
 
+Note that USB debugging is not required to run scrcpy in [OTG
+mode](doc/hid-otg.md#otg).
+
 
 ## Get the app
 
@@ -64,10 +68,11 @@ to control it using a keyboard and mouse.
 The application provides a lot of features and configuration options. They are
 documented in the following pages:
 
- - [Device](doc/device.md)
+ - [Connection](doc/connection.md)
  - [Video](doc/video.md)
  - [Audio](doc/audio.md)
  - [Control](doc/control.md)
+ - [Device](doc/device.md)
  - [Window](doc/window.md)
  - [Recording](doc/recording.md)
  - [Tunnels](doc/tunnels.md)
@@ -113,7 +118,10 @@ For general questions or discussions, you can also use:
 I'm [@rom1v](https://github.com/rom1v), the author and maintainer of _scrcpy_.
 
 If you appreciate this application, you can [support my open source
-work][donate].
+work][donate]:
+ - [GitHub Sponsors](https://github.com/sponsors/rom1v)
+ - [Liberapay](https://liberapay.com/rom1v/)
+ - [PayPal](https://paypal.me/rom2v)
 
 [donate]: https://blog.rom1v.com/about/#support-my-open-source-work
 

app/data/bash-completion/scrcpy

@@ -44,6 +44,8 @@ _scrcpy() {
         --no-video-playback
         --otg
         -p --port=
+        --pause-on-exit
+        --pause-on-exit=
         --power-off-on-close
         --prefer-text
         --print-fps
@@ -97,6 +99,10 @@ _scrcpy() {
             COMPREPLY=($(compgen -W 'unlocked initial 0 1 2 3' -- "$cur"))
             return
             ;;
+        --pause-on-exit)
+            COMPREPLY=($(compgen -W 'true false if-error' -- "$cur"))
+            return
+            ;;
         -r|--record)
             COMPREPLY=($(compgen -f -- "$cur"))
             return

app/data/scrcpy-console.bat

@@ -1,4 +1,2 @@
 @echo off
-scrcpy.exe %*
+scrcpy.exe --pause-on-exit=if-error %*
-:: if the exit code is >= 1, then pause
-if errorlevel 1 pause

app/data/scrcpy-console.desktop

@@ -5,7 +5,7 @@ Comment=Display and control your Android device
 # For some users, the PATH or ADB environment variables are set from the shell
 # startup file, like .bashrc or .zshrc… Run an interactive shell to get
 # environment correctly initialized.
-Exec=/bin/bash --norc --noprofile -i -c "\"\\$SHELL\" -i -c scrcpy || read -p 'Press Enter to quit...'"
+Exec=/bin/sh -c "\"\\$SHELL\" -i -c scrcpy --pause-on-exit=if-error"
 Icon=scrcpy
 Terminal=true
 Type=Application

app/data/zsh-completion/_scrcpy

@@ -50,6 +50,7 @@ arguments=(
     '--no-video-playback[Disable video playback]'
     '--otg[Run in OTG mode \(simulating physical keyboard and mouse\)]'
     {-p,--port=}'[\[port\[\:port\]\] Set the TCP port \(range\) used by the client to listen]'
+    '--pause-on-exit=[Make scrcpy pause before exiting]:mode:(true false if-error)'
     '--power-off-on-close[Turn the device screen off when closing scrcpy]'
     '--prefer-text[Inject alpha characters and space as text events instead of key events]'
     '--print-fps[Start FPS counter, to print frame logs to the console]'

app/prebuilt-deps/prepare-adb.sh

@@ -6,10 +6,10 @@ cd "$DIR"
 mkdir -p "$PREBUILT_DATA_DIR"
 cd "$PREBUILT_DATA_DIR"
 
-DEP_DIR=platform-tools-34.0.1
+DEP_DIR=platform-tools-34.0.3
 
-FILENAME=platform-tools_r34.0.1-windows.zip
+FILENAME=platform-tools_r34.0.3-windows.zip
-SHA256SUM=5dd9c2be744c224fa3a7cbe30ba02d2cb378c763bd0f797a7e47e9f3156a5daa
+SHA256SUM=fce992e93eb786fc9f47df93d83a7b912c46742d45c39d712c02e06d05b72e2b
 
 if [[ -d "$DEP_DIR" ]]
 then

app/scrcpy-windows.rc

@@ -13,7 +13,7 @@ BEGIN
       VALUE "LegalCopyright", "Romain Vimont, Genymobile"
       VALUE "OriginalFilename", "scrcpy.exe"
       VALUE "ProductName", "scrcpy"
-      VALUE "ProductVersion", "2.0"
+      VALUE "ProductVersion", "2.1.1"
     END
   END
   BLOCK "VarFileInfo"

app/scrcpy.1

@@ -21,7 +21,7 @@ Make scrcpy window always on top (above other windows).
 
 .TP
 .BI "\-\-audio\-bit\-rate " value
-Encode the audio at the given bit\-rate, expressed in bits/s. Unit suffixes are supported: '\fBK\fR' (x1000) and '\fBM\fR' (x1000000).
+Encode the audio at the given bit rate, expressed in bits/s. Unit suffixes are supported: '\fBK\fR' (x1000) and '\fBM\fR' (x1000000).
 
 Default is 128K (128000).
 
@@ -71,7 +71,7 @@ Default is 5.
 
 .TP
 .BI "\-b, \-\-video\-bit\-rate " value
-Encode the video at the given bit\-rate, expressed in bits/s. Unit suffixes are supported: '\fBK\fR' (x1000) and '\fBM\fR' (x1000000).
+Encode the video at the given bit rate, expressed in bits/s. Unit suffixes are supported: '\fBK\fR' (x1000) and '\fBM\fR' (x1000000).
 
 Default is 8M (8000000).
 
@@ -267,6 +267,16 @@ Set the TCP port (range) used by the client to listen.
 
 Default is 27183:27199.
 
+.TP
+\fB\-\-pause\-on\-exit\fR[=\fImode\fR]
+Configure pause on exit. Possible values are "true" (always pause on exit), "false" (never pause on exit) and "if-error" (pause only if an error occured).
+
+This is useful to prevent the terminal window from automatically closing, so that error messages can be read.
+
+Default is "false".
+
+Passing the option without argument is equivalent to passing "true".
+
 .TP
 .B \-\-power\-off\-on\-close
 Turn the device screen off when closing scrcpy.

app/src/adb/adb.c

@@ -628,8 +628,8 @@ sc_adb_select_device(struct sc_intr *intr,
         return false;
     }
 
-    LOGD("ADB device found:");
+    LOGI("ADB device found:");
-    sc_adb_devices_log(SC_LOG_LEVEL_DEBUG, vec.data, vec.size);
+    sc_adb_devices_log(SC_LOG_LEVEL_INFO, vec.data, vec.size);
 
     // Move devics into out_device (do not destroy device)
     sc_adb_device_move(out_device, device);

app/src/cli.c

@@ -79,6 +79,7 @@ enum {
     OPT_AUDIO_SOURCE,
     OPT_KILL_ADB_ON_CLOSE,
     OPT_TIME_LIMIT,
+    OPT_PAUSE_ON_EXIT,
 };
 
 struct sc_option {
@@ -124,7 +125,7 @@ static const struct sc_option options[] = {
         .longopt_id = OPT_AUDIO_BIT_RATE,
         .longopt = "audio-bit-rate",
         .argdesc = "value",
-        .text = "Encode the audio at the given bit-rate, expressed in bits/s. "
+        .text = "Encode the audio at the given bit rate, expressed in bits/s. "
                 "Unit suffixes are supported: 'K' (x1000) and 'M' (x1000000).\n"
                 "Default is 128K (128000).",
     },
@@ -185,7 +186,7 @@ static const struct sc_option options[] = {
         .shortopt = 'b',
         .longopt = "video-bit-rate",
         .argdesc = "value",
-        .text = "Encode the video at the given bit-rate, expressed in bits/s. "
+        .text = "Encode the video at the given bit rate, expressed in bits/s. "
                 "Unit suffixes are supported: 'K' (x1000) and 'M' (x1000000).\n"
                 "Default is 8M (8000000).",
     },
@@ -463,6 +464,20 @@ static const struct sc_option options[] = {
                 "Default is " STR(DEFAULT_LOCAL_PORT_RANGE_FIRST) ":"
                               STR(DEFAULT_LOCAL_PORT_RANGE_LAST) ".",
     },
+    {
+        .longopt_id = OPT_PAUSE_ON_EXIT,
+        .longopt = "pause-on-exit",
+        .argdesc = "mode",
+        .optional_arg = true,
+        .text = "Configure pause on exit. Possible values are \"true\" (always "
+                "pause on exit), \"false\" (never pause on exit) and "
+                "\"if-error\" (pause only if an error occured).\n"
+                "This is useful to prevent the terminal window from "
+                "automatically closing, so that error messages can be read.\n"
+                "Default is \"false\".\n"
+                "Passing the option without argument is equivalent to passing "
+                "\"true\".",
+    },
     {
         .longopt_id = OPT_POWER_OFF_ON_CLOSE,
         .longopt = "power-off-on-close",
@@ -1637,6 +1652,29 @@ parse_time_limit(const char *s, sc_tick *tick) {
     return true;
 }
 
+static bool
+parse_pause_on_exit(const char *s, enum sc_pause_on_exit *pause_on_exit) {
+    if (!s || !strcmp(s, "true")) {
+        *pause_on_exit = SC_PAUSE_ON_EXIT_TRUE;
+        return true;
+    }
+
+    if (!strcmp(s, "false")) {
+        *pause_on_exit = SC_PAUSE_ON_EXIT_FALSE;
+        return true;
+    }
+
+    if (!strcmp(s, "if-error")) {
+        *pause_on_exit = SC_PAUSE_ON_EXIT_IF_ERROR;
+        return true;
+    }
+
+    LOGE("Unsupported pause on exit mode: %s "
+         "(expected true, false or if-error)", optarg);
+    return false;
+
+}
+
 static bool
 parse_args_with_getopt(struct scrcpy_cli_args *args, int argc, char *argv[],
                        const char *optstring, const struct option *longopts) {
@@ -1977,6 +2015,11 @@ parse_args_with_getopt(struct scrcpy_cli_args *args, int argc, char *argv[],
                     return false;
                 }
                 break;
+            case OPT_PAUSE_ON_EXIT:
+                if (!parse_pause_on_exit(optarg, &args->pause_on_exit)) {
+                    return false;
+                }
+                break;
             default:
                 // getopt prints the error message on stderr
                 return false;
@@ -2022,12 +2065,6 @@ parse_args_with_getopt(struct scrcpy_cli_args *args, int argc, char *argv[],
         opts->audio_playback = false;
     }
 
-    if (!opts->video_playback && !otg) {
-        // If video playback is disabled and OTG are disabled, then there is
-        // no way to control the device.
-        opts->control = false;
-    }
-
     if (opts->video && !opts->video_playback && !opts->record_filename
             && !v4l2) {
         LOGI("No video playback, no recording, no V4L2 sink: video disabled");
@@ -2196,6 +2233,37 @@ parse_args_with_getopt(struct scrcpy_cli_args *args, int argc, char *argv[],
     return true;
 }
 
+static enum sc_pause_on_exit
+sc_get_pause_on_exit(int argc, char *argv[]) {
+    // Read arguments backwards so that the last --pause-on-exit is considered
+    // (same behavior as getopt())
+    for (int i = argc - 1; i >= 1; --i) {
+        const char *arg = argv[i];
+        // Starts with "--pause-on-exit"
+        if (!strncmp("--pause-on-exit", arg, 15)) {
+            if (arg[15] == '\0') {
+                // No argument
+                return SC_PAUSE_ON_EXIT_TRUE;
+            }
+            if (arg[15] != '=') {
+                // Invalid parameter, ignore
+                return SC_PAUSE_ON_EXIT_FALSE;
+            }
+            const char *value = &arg[16];
+            if (!strcmp(value, "true")) {
+                return SC_PAUSE_ON_EXIT_TRUE;
+            }
+            if (!strcmp(value, "if-error")) {
+                return SC_PAUSE_ON_EXIT_IF_ERROR;
+            }
+            // Set to false, inclusing when the value is invalid
+            return SC_PAUSE_ON_EXIT_FALSE;
+        }
+    }
+
+    return false;
+}
+
 bool
 scrcpy_parse_args(struct scrcpy_cli_args *args, int argc, char *argv[]) {
     struct sc_getopt_adapter adapter;
@@ -2209,5 +2277,11 @@ scrcpy_parse_args(struct scrcpy_cli_args *args, int argc, char *argv[]) {
 
     sc_getopt_adapter_destroy(&adapter);
 
+    if (!ret && args->pause_on_exit == SC_PAUSE_ON_EXIT_FALSE) {
+        // Check if "--pause-on-exit" is present in the arguments list, because
+        // it must be taken into account even if command line parsing failed
+        args->pause_on_exit = sc_get_pause_on_exit(argc, argv);
+    }
+
     return ret;
 }

app/src/cli.h

@@ -7,10 +7,17 @@
 
 #include "options.h"
 
+enum sc_pause_on_exit {
+    SC_PAUSE_ON_EXIT_TRUE,
+    SC_PAUSE_ON_EXIT_FALSE,
+    SC_PAUSE_ON_EXIT_IF_ERROR,
+};
+
 struct scrcpy_cli_args {
     struct scrcpy_options opts;
     bool help;
     bool version;
+    enum sc_pause_on_exit pause_on_exit;
 };
 
 void

app/src/display.c

@@ -53,7 +53,7 @@ sc_display_init(struct sc_display *display, SDL_Window *window, bool mipmaps) {
                 display->mipmaps = true;
             } else {
                 LOGW("Trilinear filtering disabled "
-                     "(OpenGL 3.0+ or ES 2.0+ required");
+                     "(OpenGL 3.0+ or ES 2.0+ required)");
             }
         } else {
             LOGI("Trilinear filtering disabled");

app/src/main.c

@@ -39,26 +39,32 @@ main_scrcpy(int argc, char *argv[]) {
         .opts = scrcpy_options_default,
         .help = false,
         .version = false,
+        .pause_on_exit = SC_PAUSE_ON_EXIT_FALSE,
     };
 
 #ifndef NDEBUG
     args.opts.log_level = SC_LOG_LEVEL_DEBUG;
 #endif
 
+    enum scrcpy_exit_code ret;
+
     if (!scrcpy_parse_args(&args, argc, argv)) {
-        return SCRCPY_EXIT_FAILURE;
+        ret = SCRCPY_EXIT_FAILURE;
+        goto end;
     }
 
     sc_set_log_level(args.opts.log_level);
 
     if (args.help) {
         scrcpy_print_usage(argv[0]);
-        return SCRCPY_EXIT_SUCCESS;
+        ret = SCRCPY_EXIT_SUCCESS;
+        goto end;
     }
 
     if (args.version) {
         scrcpy_print_version();
-        return SCRCPY_EXIT_SUCCESS;
+        ret = SCRCPY_EXIT_SUCCESS;
+        goto end;
     }
 
 #ifdef SCRCPY_LAVF_REQUIRES_REGISTER_ALL
@@ -72,18 +78,26 @@ main_scrcpy(int argc, char *argv[]) {
 #endif
 
     if (!net_init()) {
-        return SCRCPY_EXIT_FAILURE;
+        ret = SCRCPY_EXIT_FAILURE;
+        goto end;
     }
 
     sc_log_configure();
 
 #ifdef HAVE_USB
-    enum scrcpy_exit_code ret = args.opts.otg ? scrcpy_otg(&args.opts)
+    ret = args.opts.otg ? scrcpy_otg(&args.opts) : scrcpy(&args.opts);
-                                              : scrcpy(&args.opts);
 #else
-    enum scrcpy_exit_code ret = scrcpy(&args.opts);
+    ret = scrcpy(&args.opts);
 #endif
 
+end:
+    if (args.pause_on_exit == SC_PAUSE_ON_EXIT_TRUE ||
+            (args.pause_on_exit == SC_PAUSE_ON_EXIT_IF_ERROR &&
+                ret != SCRCPY_EXIT_SUCCESS)) {
+        printf("Press Enter to continue...\n");
+        getchar();
+    }
+
     return ret;
 }
 

app/src/scrcpy.c

@@ -252,7 +252,9 @@ sc_audio_demuxer_on_ended(struct sc_demuxer *demuxer,
 
     // Contrary to the video demuxer, keep mirroring if only the audio fails
     // (unless --require-audio is set).
-    if (status == SC_DEMUXER_STATUS_ERROR
+    if (status == SC_DEMUXER_STATUS_EOS) {
+        PUSH_EVENT(SC_EVENT_DEVICE_DISCONNECTED);
+    } else if (status == SC_DEMUXER_STATUS_ERROR
             || (status == SC_DEMUXER_STATUS_DISABLED
                 && options->require_audio)) {
         PUSH_EVENT(SC_EVENT_DEMUXER_ERROR);
@@ -448,9 +450,7 @@ scrcpy(struct scrcpy_options *options) {
 
     struct sc_file_pusher *fp = NULL;
 
-    // control implies video playback
+    if (options->video_playback && options->control) {
-    assert(!options->control || options->video_playback);
-    if (options->control) {
         if (!sc_file_pusher_init(&s->file_pusher, serial,
                                  options->push_target)) {
             goto end;

app/src/screen.c

@@ -488,6 +488,7 @@ sc_screen_show_initial_window(struct sc_screen *screen) {
     }
 
     SDL_ShowWindow(screen->window);
+    sc_screen_update_content_rect(screen);
 }
 
 void
@@ -848,6 +849,8 @@ sc_screen_convert_drawable_to_frame_coords(struct sc_screen *screen,
     int32_t w = screen->content_size.width;
     int32_t h = screen->content_size.height;
 
+    // screen->rect must be initialized to avoid a division by zero
+    assert(screen->rect.w && screen->rect.h);
 
     x = (int64_t) (x - screen->rect.x) * w / screen->rect.w;
     y = (int64_t) (y - screen->rect.y) * h / screen->rect.h;

app/src/server.c

@@ -533,8 +533,8 @@ sc_server_connect_to(struct sc_server *server, struct sc_server_info *info) {
                 if (audio_socket == SC_SOCKET_NONE) {
                     goto fail;
                 }
-                bool ok = net_connect_intr(&server->intr, audio_socket, tunnel_host,
+                bool ok = net_connect_intr(&server->intr, audio_socket,
-                                           tunnel_port);
+                                           tunnel_host, tunnel_port);
                 if (!ok) {
                     goto fail;
                 }

app/src/usb/scrcpy_otg.c

@@ -105,10 +105,6 @@ scrcpy_otg(struct scrcpy_options *options) {
 
     usb_device_initialized = true;
 
-    LOGI("USB device: %s (%04x:%04x) %s %s", usb_device.serial,
-         (unsigned) usb_device.vid, (unsigned) usb_device.pid,
-         usb_device.manufacturer, usb_device.product);
-
     ok = sc_usb_connect(&s->usb, usb_device.device, &cbs, NULL);
     if (!ok) {
         goto end;

app/src/usb/usb.c

@@ -213,8 +213,8 @@ sc_usb_select_device(struct sc_usb *usb, const char *serial,
     assert(sel_count == 1); // sel_idx is valid only if sel_count == 1
     struct sc_usb_device *device = &vec.data[sel_idx];
 
-    LOGD("USB device found:");
+    LOGI("USB device found:");
-    sc_usb_devices_log(SC_LOG_LEVEL_DEBUG, vec.data, vec.size);
+    sc_usb_devices_log(SC_LOG_LEVEL_INFO, vec.data, vec.size);
 
     // Move device into out_device (do not destroy device)
     sc_usb_device_move(out_device, device);

doc/audio.md

@@ -71,6 +71,20 @@ scrcpy --audio-codec=aac
 scrcpy --audio-codec=raw
 ```
 
+In particular, if you get the following error:
+
+> Failed to initialize audio/opus, error 0xfffffffe
+
+then your device has no Opus encoder: try `scrcpy --audio-codec=aac`.
+
+For advanced usage, to pass arbitrary parameters to the [`MediaFormat`],
+check `--audio-codec-options` in the manpage or in `scrcpy --help`.
+
+[`MediaFormat`]: https://developer.android.com/reference/android/media/MediaFormat
+
+
+## Encoder
+
 Several encoders may be available on the device. They can be listed by:
 
 ```bash
@@ -79,19 +93,14 @@ scrcpy --list-encoders
 
 To select a specific encoder:
 
-```
+```bash
 scrcpy --audio-codec=opus --audio-encoder='c2.android.opus.encoder'
 ```
 
-For advanced usage, to pass arbitrary parameters to the [`MediaFormat`],
-check `--audio-codec-options` in the manpage or in `scrcpy --help`.
-
-[`MediaFormat`]: https://developer.android.com/reference/android/media/MediaFormat
-
 
 ## Bit rate
 
-The default video bit-rate is 128Kbps. To change it:
+The default audio bit rate is 128Kbps. To change it:
 
 ```bash
 scrcpy --audio-bit-rate=64K

doc/build.md

@@ -77,7 +77,7 @@ pip3 install meson
 sudo dnf install https://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-$(rpm -E %fedora).noarch.rpm
 
 # client build dependencies
-sudo dnf install SDL2-devel ffms2-devel libusb-devel meson gcc make
+sudo dnf install SDL2-devel ffms2-devel libusb1-devel meson gcc make
 
 # server build dependencies
 sudo dnf install java-devel
@@ -233,10 +233,10 @@ install` must be run as root)._
 
 #### Option 2: Use prebuilt server
 
- - [`scrcpy-server-v2.0`][direct-scrcpy-server]  
+ - [`scrcpy-server-v2.1.1`][direct-scrcpy-server]  
-   <sub>SHA-256: `9e241615f578cd690bb43311000debdecf6a9c50a7082b001952f18f6f21ddc2`</sub>
+   <sub>SHA-256: `9558db6c56743a1dc03b38f59801fb40e91cc891f8fc0c89e5b0b067761f148e`</sub>
 
-[direct-scrcpy-server]: https://github.com/Genymobile/scrcpy/releases/download/v2.0/scrcpy-server-v2.0
+[direct-scrcpy-server]: https://github.com/Genymobile/scrcpy/releases/download/v2.1.1/scrcpy-server-v2.1.1
 
 Download the prebuilt server somewhere, and specify its path during the Meson
 configuration:

doc/connection.md

@@ -0,0 +1,125 @@
+# Connection
+
+## Selection
+
+If exactly one device is connected (i.e. listed by `adb devices`), then it is
+automatically selected.
+
+However, if there are multiple devices connected, you must specify the one to
+use in one of 4 ways:
+ - by its serial:
+   ```bash
+   scrcpy --serial=0123456789abcdef
+   scrcpy -s 0123456789abcdef   # short version
+
+   # the serial is the ip:port if connected over TCP/IP (same behavior as adb)
+   scrcpy --serial=192.168.1.1:5555
+   ```
+ - the one connected over USB (if there is exactly one):
+   ```bash
+   scrcpy --select-usb
+   scrcpy -d   # short version
+   ```
+ - the one connected over TCP/IP (if there is exactly one):
+   ```bash
+   scrcpy --select-tcpip
+   scrcpy -e   # short version
+   ```
+ - a device already listening on TCP/IP (see [below](#tcpip-wireless)):
+   ```bash
+   scrcpy --tcpip=192.168.1.1:5555
+   scrcpy --tcpip=192.168.1.1        # default port is 5555
+   ```
+
+The serial may also be provided via the environment variable `ANDROID_SERIAL`
+(also used by `adb`):
+
+```bash
+# in bash
+export ANDROID_SERIAL=0123456789abcdef
+scrcpy
+```
+
+```cmd
+:: in cmd
+set ANDROID_SERIAL=0123456789abcdef
+scrcpy
+```
+
+```powershell
+# in PowerShell
+$env:ANDROID_SERIAL = '0123456789abcdef'
+scrcpy
+```
+
+
+## TCP/IP (wireless)
+
+_Scrcpy_ uses `adb` to communicate with the device, and `adb` can [connect] to a
+device over TCP/IP. The device must be connected on the same network as the
+computer.
+
+[connect]: https://developer.android.com/studio/command-line/adb.html#wireless
+
+
+### Automatic
+
+An option `--tcpip` allows to configure the connection automatically. There are
+two variants.
+
+If the device (accessible at 192.168.1.1 in this example) already listens on a
+port (typically 5555) for incoming _adb_ connections, then run:
+
+```bash
+scrcpy --tcpip=192.168.1.1       # default port is 5555
+scrcpy --tcpip=192.168.1.1:5555
+```
+
+If _adb_ TCP/IP mode is disabled on the device (or if you don't know the IP
+address), connect the device over USB, then run:
+
+```bash
+scrcpy --tcpip   # without arguments
+```
+
+It will automatically find the device IP address and adb port, enable TCP/IP
+mode if necessary, then connect to the device before starting.
+
+
+### Manual
+
+Alternatively, it is possible to enable the TCP/IP connection manually using
+`adb`:
+
+1. Plug the device into a USB port on your computer.
+2. Connect the device to the same Wi-Fi network as your computer.
+3. Get your device IP address, in Settings → About phone → Status, or by
+   executing this command:
+
+    ```bash
+    adb shell ip route | awk '{print $9}'
+    ```
+
+4. Enable `adb` over TCP/IP on your device: `adb tcpip 5555`.
+5. Unplug your device.
+6. Connect to your device: `adb connect DEVICE_IP:5555` _(replace `DEVICE_IP`
+with the device IP address you found)_.
+7. Run `scrcpy` as usual.
+8. Run `adb disconnect` once you're done.
+
+Since Android 11, a [wireless debugging option][adb-wireless] allows to bypass
+having to physically connect your device directly to your computer.
+
+[adb-wireless]: https://developer.android.com/studio/command-line/adb#wireless-android11-command-line
+
+
+## Autostart
+
+A small tool (by the scrcpy author) allows to run arbitrary commands whenever a
+new Android device is connected: [AutoAdb]. It can be used to start scrcpy:
+
+```bash
+autoadb scrcpy -s '{}'
+```
+
+[AutoAdb]: https://github.com/rom1v/autoadb

doc/develop.md

@@ -359,7 +359,7 @@ metadata]:
    - the initial video width (`u32`)
    - the initial video height (`u32`)
  - On the _audio_ socket, 4 bytes:
-   - the codec id ('u32`) (OPUS, AAC or RAW)
+   - the codec id (`u32`) (OPUS, AAC or RAW)
 
 [codec metadata]: https://github.com/Genymobile/scrcpy/blob/a3cdf1a6b86ea22786e1f7d09b9c202feabc6949/server/src/main/java/com/genymobile/scrcpy/Streamer.java#L33-L51
 

doc/device.md

@@ -1,156 +1,9 @@
 # Device
 
-## Selection
-
-If exactly one device is connected (i.e. listed by `adb devices`), then it is
-automatically selected.
-
-However, if there are multiple devices connected, you must specify the one to
-use in one of 4 ways:
- - by its serial:
-   ```bash
-   scrcpy --serial=0123456789abcdef
-   scrcpy -s 0123456789abcdef   # short version
-
-   # the serial is the ip:port if connected over TCP/IP (same behavior as adb)
-   scrcpy --serial=192.168.1.1:5555
-   ```
- - the one connected over USB (if there is exactly one):
-   ```bash
-   scrcpy --select-usb
-   scrcpy -d   # short version
-   ```
- - the one connected over TCP/IP (if there is exactly one):
-   ```bash
-   scrcpy --select-tcpip
-   scrcpy -e   # short version
-   ```
- - a device already listening on TCP/IP (see [below](#tcpip-wireless)):
-   ```bash
-   scrcpy --tcpip=192.168.1.1:5555
-   scrcpy --tcpip=192.168.1.1        # default port is 5555
-   ```
-
-The serial may also be provided via the environment variable `ANDROID_SERIAL`
-(also used by `adb`):
-
-```bash
-# in bash
-export ANDROID_SERIAL=0123456789abcdef
-scrcpy
-```
-
-```cmd
-:: in cmd
-set ANDROID_SERIAL=0123456789abcdef
-scrcpy
-```
-
-```powershell
-# in PowerShell
-$env:ANDROID_SERIAL = '0123456789abcdef'
-scrcpy
-```
-
-
-## TCP/IP (wireless)
-
-_Scrcpy_ uses `adb` to communicate with the device, and `adb` can [connect] to a
-device over TCP/IP. The device must be connected on the same network as the
-computer.
-
-[connect]: https://developer.android.com/studio/command-line/adb.html#wireless
-
-
-### Automatic
-
-An option `--tcpip` allows to configure the connection automatically. There are
-two variants.
-
-If the device (accessible at 192.168.1.1 in this example) already listens on a
-port (typically 5555) for incoming _adb_ connections, then run:
-
-```bash
-scrcpy --tcpip=192.168.1.1       # default port is 5555
-scrcpy --tcpip=192.168.1.1:5555
-```
-
-If _adb_ TCP/IP mode is disabled on the device (or if you don't know the IP
-address), connect the device over USB, then run:
-
-```bash
-scrcpy --tcpip   # without arguments
-```
-
-It will automatically find the device IP address and adb port, enable TCP/IP
-mode if necessary, then connect to the device before starting.
-
-
-### Manual
-
-Alternatively, it is possible to enable the TCP/IP connection manually using
-`adb`:
-
-1. Plug the device into a USB port on your computer.
-2. Connect the device to the same Wi-Fi network as your computer.
-3. Get your device IP address, in Settings → About phone → Status, or by
-   executing this command:
-
-    ```bash
-    adb shell ip route | awk '{print $9}'
-    ```
-
-4. Enable `adb` over TCP/IP on your device: `adb tcpip 5555`.
-5. Unplug your device.
-6. Connect to your device: `adb connect DEVICE_IP:5555` _(replace `DEVICE_IP`
-with the device IP address you found)_.
-7. Run `scrcpy` as usual.
-8. Run `adb disconnect` once you're done.
-
-Since Android 11, a [wireless debugging option][adb-wireless] allows to bypass
-having to physically connect your device directly to your computer.
-
-[adb-wireless]: https://developer.android.com/studio/command-line/adb#wireless-android11-command-line
-
-
-## Autostart
-
-A small tool (by the scrcpy author) allows to run arbitrary commands whenever a
-new Android device is connected: [AutoAdb]. It can be used to start scrcpy:
-
-```bash
-autoadb scrcpy -s '{}'
-```
-
-[AutoAdb]: https://github.com/rom1v/autoadb
-
-
-## Display
-
-If several displays are available on the Android device, it is possible to
-select the display to mirror:
-
-```bash
-scrcpy --display=1
-```
-
-The list of display ids can be retrieved by:
-
-```bash
-scrcpy --list-displays
-```
-
-A secondary display may only be controlled if the device runs at least Android
-10 (otherwise it is mirrored as read-only).
-
-
-## Actions
-
 Some command line arguments perform actions on the device itself while scrcpy is
 running.
 
-
+## Stay awake
-### Stay awake
 
 To prevent the device from sleeping after a delay **when the device is plugged
 in**:
@@ -166,7 +19,7 @@ If the device is not plugged in (i.e. only connected over TCP/IP),
 `--stay-awake` has no effect (this is the Android behavior).
 
 
-### Turn screen off
+## Turn screen off
 
 It is possible to turn the device screen off while mirroring on start with a
 command-line option:
@@ -194,7 +47,7 @@ scrcpy -Sw   # short version
 ```
 
 
-### Show touches
+## Show touches
 
 For presentations, it may be useful to show physical touches (on the physical
 device). Android exposes this feature in _Developers options_.
@@ -210,7 +63,7 @@ scrcpy -t   # short version
 Note that it only shows _physical_ touches (by a finger on the device).
 
 
-### Power off on close
+## Power off on close
 
 To turn the device screen off when closing _scrcpy_:
 
@@ -218,11 +71,10 @@ To turn the device screen off when closing _scrcpy_:
 scrcpy --power-off-on-close
 ```
 
-### Power on on start
+## Power on on start
 
 By default, on start, the device is powered on. To prevent this behavior:
 
 ```bash
 scrcpy --no-power-on
 ```
-

doc/hid-otg.md

@@ -106,3 +106,7 @@ scrcpy --otg                             # keyboard and mouse
 
 Like `--hid-keyboard` and `--hid-mouse`, it only works if the device is
 connected over USB.
+
+## HID/OTG issues on Windows
+
+See [FAQ](/FAQ.md#hidotg-issues-on-windows).

doc/linux.md

@@ -9,12 +9,10 @@ Scrcpy is packaged in several distributions and package managers:
  - Debian/Ubuntu: `apt install scrcpy`
  - Arch Linux: `pacman -S scrcpy`
  - Fedora: `dnf copr enable zeno/scrcpy && dnf install scrcpy`
- - Gentoo: [ebuild][ebuild-link] file
+ - Gentoo: `emerge scrcpy`
  - Snap: `snap install scrcpy`
  - … (see [repology](https://repology.org/project/scrcpy/versions))
 
-[ebuild-link]: https://github.com/maggu2810/maggu2810-overlay/tree/master/app-mobilephone/scrcpy
-
 ### Latest version
 
 However, the packaged version is not always the latest release. To install the

doc/shortcuts.md

@@ -29,7 +29,7 @@ _<kbd>[Super]</kbd> is typically the <kbd>Windows</kbd> or <kbd>Cmd</kbd> key._
  | Resize window to 1:1 (pixel-perfect)        | <kbd>MOD</kbd>+<kbd>g</kbd>
  | Resize window to remove black borders       | <kbd>MOD</kbd>+<kbd>w</kbd> \| _Double-left-click¹_
  | Click on `HOME`                             | <kbd>MOD</kbd>+<kbd>h</kbd> \| _Middle-click_
- | Click on `BACK`                             | <kbd>MOD</kbd>+<kbd>b</kbd> \| _Right-click²_
+ | Click on `BACK`                             | <kbd>MOD</kbd>+<kbd>b</kbd> \| <kbd>MOD</kbd>+<kbd>Backspace</kbd> \| _Right-click²_
  | Click on `APP_SWITCH`                       | <kbd>MOD</kbd>+<kbd>s</kbd> \| _4th-click³_
  | Click on `MENU` (unlock screen)⁴            | <kbd>MOD</kbd>+<kbd>m</kbd>
  | Click on `VOLUME_UP`                        | <kbd>MOD</kbd>+<kbd>↑</kbd> _(up)_

doc/video.md

@@ -21,7 +21,7 @@ If encoding fails, scrcpy automatically tries again with a lower definition
 
 ## Bit rate
 
-The default video bit-rate is 8 Mbps. To change it:
+The default video bit rate is 8 Mbps. To change it:
 
 ```bash
 scrcpy --video-bit-rate=2M
@@ -66,6 +66,14 @@ scrcpy --video-codec=av1
 H265 may provide better quality, but H264 should provide lower latency.
 AV1 encoders are not common on current Android devices.
 
+For advanced usage, to pass arbitrary parameters to the [`MediaFormat`],
+check `--video-codec-options` in the manpage or in `scrcpy --help`.
+
+[`MediaFormat`]: https://developer.android.com/reference/android/media/MediaFormat
+
+
+## Encoder
+
 Several encoders may be available on the device. They can be listed by:
 
 ```bash
@@ -79,11 +87,6 @@ try another one:
 scrcpy --video-codec=h264 --video-encoder='OMX.qcom.video.encoder.avc'
 ```
 
-For advanced usage, to pass arbitrary parameters to the [`MediaFormat`],
-check `--video-codec-options` in the manpage or in `scrcpy --help`.
-
-[`MediaFormat`]: https://developer.android.com/reference/android/media/MediaFormat
-
 
 ## Rotation
 
@@ -134,6 +137,25 @@ phone, landscape for a tablet).
 If `--max-size` is also specified, resizing is applied after cropping.
 
 
+## Display
+
+If several displays are available on the Android device, it is possible to
+select the display to mirror:
+
+```bash
+scrcpy --display=1
+```
+
+The list of display ids can be retrieved by:
+
+```bash
+scrcpy --list-displays
+```
+
+A secondary display may only be controlled if the device runs at least Android
+10 (otherwise it is mirrored as read-only).
+
+
 ## Buffering
 
 By default, there is no video buffering, to get the lowest possible latency.

doc/windows.md

@@ -4,18 +4,24 @@
 
 Download the [latest release]:
 
- - [`scrcpy-win64-v2.0.zip`][direct-win64] (64-bit)  
+ - [`scrcpy-win64-v2.1.1.zip`][direct-win64] (64-bit)  
-   <sub>SHA-256: `ae4c8d37a496b43f8974ba8f07f708e22a9570ba0cddc3dc3a36edbccd4d2a20`</sub>
+   <sub>SHA-256: `f77281e1bce2f9934617699c581f063d5b327f012eff602ee98fb2ef550c25c2`</sub>
- - [`scrcpy-win32-v2.0.zip`][direct-win32] (32-bit)  
+ - [`scrcpy-win32-v2.1.1.zip`][direct-win32] (32-bit)  
-   <sub>SHA-256: `15d98c02cb0e0bbd84f8b5d54991e0f6925569b1286a86a40743944fcb1c2d8c`</sub>
+   <sub>SHA-256: `ef7ae7fbe9449f2643febdc2244fb186d1a746a3c736394150cfd14f06d3c943`</sub>
 
 [latest release]: https://github.com/Genymobile/scrcpy/releases/latest
-[direct-win64]: https://github.com/Genymobile/scrcpy/releases/download/v2.0/scrcpy-win64-v2.0.zip
+[direct-win64]: https://github.com/Genymobile/scrcpy/releases/download/v2.1.1/scrcpy-win64-v2.1.1.zip
-[direct-win32]: https://github.com/Genymobile/scrcpy/releases/download/v2.0/scrcpy-win32-v2.0.zip
+[direct-win32]: https://github.com/Genymobile/scrcpy/releases/download/v2.1.1/scrcpy-win32-v2.1.1.zip
 
 and extract it.
 
-Alternatively, you could install it from packages manager, like [Chocolatey]:
+Alternatively, you could install it from packages manager, like [Winget]:
+
+```bash
+winget install scrcpy
+```
+
+or [Chocolatey]:
 
 ```bash
 choco install scrcpy
@@ -30,6 +36,7 @@ scoop install scrcpy
 scoop install adb    # if you don't have it yet
 ```
 
+[Winget]: https://github.com/microsoft/winget-cli
 [Chocolatey]: https://chocolatey.org/
 [Scoop]: https://scoop.sh
 

install_release.sh

@@ -2,8 +2,8 @@
 set -e
 
 BUILDDIR=build-auto
-PREBUILT_SERVER_URL=https://github.com/Genymobile/scrcpy/releases/download/v2.0/scrcpy-server-v2.0
+PREBUILT_SERVER_URL=https://github.com/Genymobile/scrcpy/releases/download/v2.1.1/scrcpy-server-v2.1.1
-PREBUILT_SERVER_SHA256=9e241615f578cd690bb43311000debdecf6a9c50a7082b001952f18f6f21ddc2
+PREBUILT_SERVER_SHA256=9558db6c56743a1dc03b38f59801fb40e91cc891f8fc0c89e5b0b067761f148e
 
 echo "[scrcpy] Downloading prebuilt server..."
 wget "$PREBUILT_SERVER_URL" -O scrcpy-server

meson.build

@@ -1,5 +1,5 @@
 project('scrcpy', 'c',
-        version: '2.0',
+        version: '2.1.1',
         meson_version: '>= 0.48',
         default_options: [
             'c_std=c11',

release.mk

@@ -98,9 +98,9 @@ dist-win32: build-server build-win32
 	cp app/prebuilt-deps/data/ffmpeg-6.0-scrcpy-4/win32/bin/avcodec-60.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
 	cp app/prebuilt-deps/data/ffmpeg-6.0-scrcpy-4/win32/bin/avformat-60.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
 	cp app/prebuilt-deps/data/ffmpeg-6.0-scrcpy-4/win32/bin/swresample-4.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
-	cp app/prebuilt-deps/data/platform-tools-34.0.1/adb.exe "$(DIST)/$(WIN32_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/platform-tools-34.0.3/adb.exe "$(DIST)/$(WIN32_TARGET_DIR)/"
-	cp app/prebuilt-deps/data/platform-tools-34.0.1/AdbWinApi.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/platform-tools-34.0.3/AdbWinApi.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
-	cp app/prebuilt-deps/data/platform-tools-34.0.1/AdbWinUsbApi.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/platform-tools-34.0.3/AdbWinUsbApi.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
 	cp app/prebuilt-deps/data/SDL2-2.28.0/i686-w64-mingw32/bin/SDL2.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
 	cp app/prebuilt-deps/data/libusb-1.0.26/libusb-MinGW-Win32/bin/msys-usb-1.0.dll "$(DIST)/$(WIN32_TARGET_DIR)/"
 
@@ -116,9 +116,9 @@ dist-win64: build-server build-win64
 	cp app/prebuilt-deps/data/ffmpeg-6.0-scrcpy-4/win64/bin/avcodec-60.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
 	cp app/prebuilt-deps/data/ffmpeg-6.0-scrcpy-4/win64/bin/avformat-60.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
 	cp app/prebuilt-deps/data/ffmpeg-6.0-scrcpy-4/win64/bin/swresample-4.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
-	cp app/prebuilt-deps/data/platform-tools-34.0.1/adb.exe "$(DIST)/$(WIN64_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/platform-tools-34.0.3/adb.exe "$(DIST)/$(WIN64_TARGET_DIR)/"
-	cp app/prebuilt-deps/data/platform-tools-34.0.1/AdbWinApi.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/platform-tools-34.0.3/AdbWinApi.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
-	cp app/prebuilt-deps/data/platform-tools-34.0.1/AdbWinUsbApi.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
+	cp app/prebuilt-deps/data/platform-tools-34.0.3/AdbWinUsbApi.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
 	cp app/prebuilt-deps/data/SDL2-2.28.0/x86_64-w64-mingw32/bin/SDL2.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
 	cp app/prebuilt-deps/data/libusb-1.0.26/libusb-MinGW-x64/bin/msys-usb-1.0.dll "$(DIST)/$(WIN64_TARGET_DIR)/"
 

server/build.gradle

@@ -7,8 +7,8 @@ android {
         applicationId "com.genymobile.scrcpy"
         minSdkVersion 21
         targetSdkVersion 33
-        versionCode 20000
+        versionCode 20101
-        versionName "2.0"
+        versionName "2.1.1"
         testInstrumentationRunner "android.support.test.runner.AndroidJUnitRunner"
     }
     buildTypes {

server/build_without_gradle.sh

@@ -12,7 +12,7 @@
 set -e
 
 SCRCPY_DEBUG=false
-SCRCPY_VERSION_NAME=2.0
+SCRCPY_VERSION_NAME=2.1.1
 
 PLATFORM=${ANDROID_PLATFORM:-33}
 BUILD_TOOLS=${ANDROID_BUILD_TOOLS:-33.0.0}
@@ -48,6 +48,7 @@ cd "$SERVER_DIR/src/main/aidl"
 "$BUILD_TOOLS_DIR/aidl" -o"$GEN_DIR" android/view/IRotationWatcher.aidl
 "$BUILD_TOOLS_DIR/aidl" -o"$GEN_DIR" \
     android/content/IOnPrimaryClipChangedListener.aidl
+"$BUILD_TOOLS_DIR/aidl" -o"$GEN_DIR" android/view/IDisplayFoldListener.aidl
 
 echo "Compiling java sources..."
 cd ../java

server/src/main/java/com/genymobile/scrcpy/AudioCapture.java

@@ -118,7 +118,7 @@ public final class AudioCapture {
         if (Build.VERSION.SDK_INT == Build.VERSION_CODES.R) {
             startWorkaroundAndroid11();
             try {
-                tryStartRecording(3, 100);
+                tryStartRecording(5, 100);
             } finally {
                 stopWorkaroundAndroid11();
             }

server/src/main/java/com/genymobile/scrcpy/DesktopConnection.java

@@ -64,8 +64,6 @@ public final class DesktopConnection implements Closeable {
             throws IOException {
         String socketName = getSocketName(scid);
 
-        LocalSocket firstSocket = null;
-
         LocalSocket videoSocket = null;
         LocalSocket audioSocket = null;
         LocalSocket controlSocket = null;
@@ -74,23 +72,27 @@ public final class DesktopConnection implements Closeable {
                 try (LocalServerSocket localServerSocket = new LocalServerSocket(socketName)) {
                     if (video) {
                         videoSocket = localServerSocket.accept();
-                        firstSocket = videoSocket;
+                        if (sendDummyByte) {
+                            // send one byte so the client may read() to detect a connection error
+                            videoSocket.getOutputStream().write(0);
+                            sendDummyByte = false;
+                        }
                     }
                     if (audio) {
                         audioSocket = localServerSocket.accept();
-                        if (firstSocket == null) {
+                        if (sendDummyByte) {
-                            firstSocket = audioSocket;
+                            // send one byte so the client may read() to detect a connection error
+                            audioSocket.getOutputStream().write(0);
+                            sendDummyByte = false;
                         }
                     }
                     if (control) {
                         controlSocket = localServerSocket.accept();
-                        if (firstSocket == null) {
-                            firstSocket = controlSocket;
-                        }
-                    }
                         if (sendDummyByte) {
                             // send one byte so the client may read() to detect a connection error
-                        firstSocket.getOutputStream().write(0);
+                            controlSocket.getOutputStream().write(0);
+                            sendDummyByte = false;
+                        }
                     }
                 }
             } else {

server/src/main/java/com/genymobile/scrcpy/Device.java

@@ -99,9 +99,15 @@ public final class Device {
             }
         }, displayId);
 
+        if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.Q) {
             ServiceManager.getWindowManager().registerDisplayFoldListener(new IDisplayFoldListener.Stub() {
                 @Override
                 public void onDisplayFoldChanged(int displayId, boolean folded) {
+                    if (Device.this.displayId != displayId) {
+                        // Ignore events related to other display ids
+                        return;
+                    }
+
                     synchronized (Device.this) {
                         DisplayInfo displayInfo = ServiceManager.getDisplayManager().getDisplayInfo(displayId);
                         if (displayInfo == null) {
@@ -118,6 +124,7 @@ public final class Device {
                     }
                 }
             });
+        }
 
         if (options.getControl() && options.getClipboardAutosync()) {
             // If control and autosync are enabled, synchronize Android clipboard to the computer automatically

server/src/main/java/com/genymobile/scrcpy/ScreenEncoder.java

@@ -8,6 +8,7 @@ import android.media.MediaCodecInfo;
 import android.media.MediaFormat;
 import android.os.Build;
 import android.os.IBinder;
+import android.os.Looper;
 import android.os.SystemClock;
 import android.view.Surface;
 
@@ -147,7 +148,6 @@ public class ScreenEncoder implements Device.RotationListener, Device.FoldListen
         // Downsizing on error is only enabled if an encoding failure occurs before the first frame (downsizing later could be surprising)
 
         int newMaxSize = chooseMaxSizeFallback(screenInfo.getVideoSize());
-        Ln.i("newMaxSize = " + newMaxSize);
         if (newMaxSize == 0) {
             // Must definitively fail
             return false;
@@ -286,6 +286,10 @@ public class ScreenEncoder implements Device.RotationListener, Device.FoldListen
     @Override
     public void start(TerminationListener listener) {
         thread = new Thread(() -> {
+            // Some devices (Meizu) deadlock if the video encoding thread has no Looper
+            // <https://github.com/Genymobile/scrcpy/issues/4143>
+            Looper.prepare();
+
             try {
                 streamScreen();
             } catch (ConfigurationException e) {

server/src/main/java/com/genymobile/scrcpy/Workarounds.java

@@ -154,7 +154,7 @@ public final class Workarounds {
         }
     }
 
-    public static void fillBaseContext() {
+    private static void fillBaseContext() {
         try {
             fillActivityThread();
 

server/src/main/java/com/genymobile/scrcpy/wrappers/ActivityManager.java

@@ -17,7 +17,7 @@ import java.lang.reflect.InvocationTargetException;
 import java.lang.reflect.Method;
 
 @SuppressLint("PrivateApi,DiscouragedPrivateApi")
-public class ActivityManager {
+public final class ActivityManager {
 
     private final IInterface manager;
     private Method getContentProviderExternalMethod;

server/src/main/java/com/genymobile/scrcpy/wrappers/ClipboardManager.java

@@ -11,7 +11,7 @@ import android.os.IInterface;
 import java.lang.reflect.InvocationTargetException;
 import java.lang.reflect.Method;
 
-public class ClipboardManager {
+public final class ClipboardManager {
     private final IInterface manager;
     private Method getPrimaryClipMethod;
     private Method setPrimaryClipMethod;

server/src/main/java/com/genymobile/scrcpy/wrappers/ContentProvider.java

@@ -14,7 +14,7 @@ import java.io.Closeable;
 import java.lang.reflect.InvocationTargetException;
 import java.lang.reflect.Method;
 
-public class ContentProvider implements Closeable {
+public final class ContentProvider implements Closeable {
 
     public static final String TABLE_SYSTEM = "system";
     public static final String TABLE_SECURE = "secure";

server/src/main/java/com/genymobile/scrcpy/wrappers/StatusBarManager.java

@@ -7,7 +7,7 @@ import android.os.IInterface;
 import java.lang.reflect.InvocationTargetException;
 import java.lang.reflect.Method;
 
-public class StatusBarManager {
+public final class StatusBarManager {
 
     private final IInterface manager;
     private Method expandNotificationsPanelMethod;

server/src/main/java/com/genymobile/scrcpy/wrappers/WindowManager.java

@@ -2,6 +2,7 @@ package com.genymobile.scrcpy.wrappers;
 
 import com.genymobile.scrcpy.Ln;
 
+import android.annotation.TargetApi;
 import android.os.IInterface;
 import android.view.IRotationWatcher;
 import android.view.IDisplayFoldListener;
@@ -106,16 +107,17 @@ public final class WindowManager {
                 cls.getMethod("watchRotation", IRotationWatcher.class).invoke(manager, rotationWatcher);
             }
         } catch (Exception e) {
-            throw new AssertionError(e);
+            Ln.e("Could not register rotation watcher", e);
         }
     }
 
+    @TargetApi(29)
     public void registerDisplayFoldListener(IDisplayFoldListener foldListener) {
         try {
             Class<?> cls = manager.getClass();
             cls.getMethod("registerDisplayFoldListener", IDisplayFoldListener.class).invoke(manager, foldListener);
         } catch (Exception e) {
-            throw new AssertionError(e);
+            Ln.e("Could not register display fold listener", e);
         }
     }
 }