In addition to --camera-size to specify an explicit size, make it
possible to select the camera size automatically, respecting the maximum
size (already used for display mirroring) and an aspect ratio.
For example, "scrcpy --video-source=camera" followed by:
- (no additional arguments)
: mirrors at the maximum size, any a-r
- -m1920
: only consider valid sizes having both dimensions not above 1920
- --camera-ar=4:3
: only consider valid sizes having an aspect ratio of 4:3 (+/- 10%)
- -m2048 --camera-ar=1.6
: only consider valid sizes having both dimensions not above 2048
and an aspect ratio of 1.6 (+/- 10%)
PR #4213 <https://github.com/Genymobile/scrcpy/pull/4213>
Co-authored-by: Simon Chan <1330321+yume-chan@users.noreply.github.com>
Add an option to select the camera by its lens facing (front, back or
external).
PR #4213 <https://github.com/Genymobile/scrcpy/pull/4213>
Co-authored-by: Romain Vimont <rom@rom1v.com>
Signed-off-by: Romain Vimont <rom@rom1v.com>
If --audio-source is not specified, select the default value
according to the video source:
- for display mirroring, use device audio by default;
- for camera mirroring, use microphone by default.
PR #4213 <https://github.com/Genymobile/scrcpy/pull/4213>
Some server parameters may depend on one another. For example,
audio_bit_rate is meaningless if audio is false.
But it is inconsistent to disable some parameters based on these
dependencies checks, but not others. Handling all dependencies between
parameters would add too much complexity for no benefit.
So just pass individual parameters independently.
PR #3978 <https://github.com/Genymobile/scrcpy/pull/3978>
On initial connection, scrcpy sent some device metadata:
- the device name (to be used as window title)
- the initial video size (before any frame or even SPS/PPS)
But it is better to provide the initial video size as part as the video
stream, so that it can be demuxed and exposed via AVCodecContext to
sinks.
This avoids to pass an explicit "initial frame size" for the screen, the
recorder and the v4l2 sink.
If no bit-rate is passed, let the server use the default value (8Mbps).
This avoids to define a default value on both sides, and to pass the
default bit-rate as an argument when starting the server.
PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
When audio is enabled, open a new socket to send the audio stream from
the device to the client.
PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
Co-authored-by: Romain Vimont <rom@rom1v.com>
Signed-off-by: Romain Vimont <rom@rom1v.com>
Audio will be enabled by default (when supported). Add an option to
disable it.
PR #3757 <https://github.com/Genymobile/scrcpy/pull/3757>
Co-authored-by: Romain Vimont <rom@rom1v.com>
Signed-off-by: Romain Vimont <rom@rom1v.com>
Running scrcpy --tcpip on a device already connected via TCP/IP did not
initialize server->serial.
As a consequence, in debug mode, an assertion failed:
scrcpy: ../app/src/server.c:770: run_server: Assertion
`server->serial' failed.
In release mode, scrcpy failed with this error:
adb: -s requires an argument
A random identifier is generated to differentiate multiple running
scrcpy instances. Rename it from 'uid' to 'scid' (scrcpy id) not to
confuse it with Linux UID.
Fixes#3729 <https://github.com/Genymobile/scrcpy/issues/3729>
Refs 4315be164823d2c8fc44b475b52af79bfee98ff1
For the initial connection between the device and the computer, an adb
tunnel is established (with "adb reverse" or "adb forward").
The device-side of the tunnel is a local socket having the hard-coded
name "scrcpy". This may cause issues when several scrcpy instances are
started in a few seconds for the same device, since they will try to
bind the same name.
To avoid conflicts, make the client generate a random UID, and append
this UID to the local socket name ("scrcpy_01234567").
If the current adb port is not 5555 (typically 0 because it is not in
TCP/IP mode), --tcpip automatically executes (among other commands):
adb tcpip 5555
In case adb was already listening on another port, this command forced
to listen on 5555, and the connection should still succeed.
But this reconfiguration might be inconvenient for the user. If adb is
already in TCP/IP mode, use the current enabled port without
reconfiguration.
Fixes#3591 <https://github.com/Genymobile/scrcpy/issues/3591>
If several devices are connected (as listed by `adb devices`), it was
necessary to provide the explicit serial via -s/--serial.
If only one device is connected via USB (respectively, via TCP/IP), it
might be convenient to select it automatically. For this purpose, two
new options are introduced:
- -d/--select-usb: select the single device connected over USB
- -e/--select-tcpip: select the single device connected over TCP/IP
PR #3005 <https://github.com/Genymobile/scrcpy/pull/3005>
Currently, a device is selected either from a specific serial, or if it
is the only one connected.
In order to support selecting the only device connected via USB or via
TCP/IP separately, introduce a new selection structure.
PR #3005 <https://github.com/Genymobile/scrcpy/pull/3005>
This does nothing if the adb daemon is already started, but allows to
print any output/errors to the console.
Otherwise, the daemon starting would occur during `adb devices`, which
does not output to the console because the result is parsed.
PR #3005 <https://github.com/Genymobile/scrcpy/pull/3005>
