Sunil Dutt 7c5fda85af Wifi: Introduce a configuration parameter to disable WiFi in ECBM
This configuration parameter aims to address the following requirement.
a) If the Wifi radio on the UE is in turned on state (and the UE is not
   connected to any WWAN) and the user dials 911 and the UE is not
   capable of making E911-VoIP over WiFi calls, then the UE shall turn
   off its WiFi radio and shall try to attach to one of the WWANs,
   depending upon the air interfaces supported by the UE  for setting
   up the 911 call to the relevant PSAP. After the 911 call ends,and
   after the callback period ends, then the UE shall turn on the WiFi radio.

b) If the Wifi radio on the UE is in turned on state and the UE is connected
   to a WWAN and the user dials 911 and the UE is not capable of making
   E911-VoIP over WiFi calls, then the UE shall turn off its WiFi radio and
   shall set up the 911 call over the WWAN to which it is already attached,
   if that WWAN is available and able to support 911 calling. If that WWAN
   is not available or is not capable of supporting 911 calling, then the UE
   shall select an available WWAN for setting up the 911 call. Assumption is
   that while a LTE network may not have 911 calling support capability, all
   1x, GSM and UMTS networks will be 911 capable. After the 911 call ends,
   and after the callback period ends, then the UE shall turn on the WiFi radio.

c) If the Wifi radio on the UE is in turned on state (and the UE is not connected
   to any WWAN) and the user dials 911 and the UE is capable of making E911-VoIP
   over WiFi calls, then the UE shall not turn off its WiFi radio but shall first
   try to attach to one of the WWANs, depending upon the air interfaces supported
   by the UE , for setting up the 911 call to the relevant PSAP.

d) If the Wifi radio on the UE is in turned on state (and the UE is also connected
   to a WWAN) and the user dials 911 and the UE is capable of making E911-VoIP over
   WiFi calls, then the UE shall not turn off its WiFi radio but shall first try to
   attach to one of the WWANs, depending upon the air interfaces supported by the
   UE,for setting up the 911 call to the relevant PSAP.

Thus,the following address the requirement above.
1) Introduce a parameter (KEY_CONFIG_WIFI_DISABLED_IN_ECBM) to conifgure Wifi disable
   in ECBM for the requirement c & d. This key shall be overridden in the specific
   carrier overlay configuration file (defaulted to FALSE).
2) Already existing API (setWifiEnabled()) to turn ON/OFF Wi-Fi cater the requirement a & b .

Bug: 27854016
Change-Id: I5af370c143630bdd4b075f4730fd1de1bbe1fe7d
2016-04-15 13:32:14 -07:00

956 lines
45 KiB
Java

/*
* Copyright (C) 2015 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package android.telephony;
import com.android.internal.telephony.ICarrierConfigLoader;
import android.annotation.NonNull;
import android.annotation.Nullable;
import android.annotation.SystemApi;
import android.content.Context;
import android.os.PersistableBundle;
import android.os.RemoteException;
import android.os.ServiceManager;
/**
* Provides access to telephony configuration values that are carrier-specific.
* <p>
* Users should obtain an instance of this class by calling
* {@code mContext.getSystemService(Context.CARRIER_CONFIG_SERVICE);}
* </p>
*
* @see Context#getSystemService
* @see Context#CARRIER_CONFIG_SERVICE
*/
public class CarrierConfigManager {
private final static String TAG = "CarrierConfigManager";
/**
* @hide
*/
public CarrierConfigManager() {
}
/**
* This intent is broadcast by the system when carrier config changes.
*/
public static final String
ACTION_CARRIER_CONFIG_CHANGED = "android.telephony.action.CARRIER_CONFIG_CHANGED";
// Below are the keys used in carrier config bundles. To add a new variable, define the key and
// give it a default value in sDefaults. If you need to ship a per-network override in the
// system image, that can be added in packages/apps/CarrierConfig.
/**
* Flag indicating whether the Phone app should ignore EVENT_SIM_NETWORK_LOCKED
* events from the Sim.
* If true, this will prevent the IccNetworkDepersonalizationPanel from being shown, and
* effectively disable the "Sim network lock" feature.
*/
public static final String
KEY_IGNORE_SIM_NETWORK_LOCKED_EVENTS_BOOL = "ignore_sim_network_locked_events_bool";
/**
* Flag indicating whether the Phone app should provide a "Dismiss" button on the SIM network
* unlock screen. The default value is true. If set to false, there will be *no way* to dismiss
* the SIM network unlock screen if you don't enter the correct unlock code. (One important
* consequence: there will be no way to make an Emergency Call if your SIM is network-locked and
* you don't know the PIN.)
*/
public static final String
KEY_SIM_NETWORK_UNLOCK_ALLOW_DISMISS_BOOL = "sim_network_unlock_allow_dismiss_bool";
/** Flag indicating if the phone is a world phone */
public static final String KEY_WORLD_PHONE_BOOL = "world_phone_bool";
/**
* Flag to require or skip entitlement checks.
* If true, entitlement checks will be executed if device has been configured for it,
* If false, entitlement checks will be skipped.
*/
public static final String
KEY_REQUIRE_ENTITLEMENT_CHECKS_BOOL = "require_entitlement_checks_bool";
/**
* If true, enable vibration (haptic feedback) for key presses in the EmergencyDialer activity.
* The pattern is set on a per-platform basis using config_virtualKeyVibePattern. To be
* consistent with the regular Dialer, this value should agree with the corresponding values
* from config.xml under apps/Contacts.
*/
public static final String
KEY_ENABLE_DIALER_KEY_VIBRATION_BOOL = "enable_dialer_key_vibration_bool";
/** Flag indicating if dtmf tone type is enabled */
public static final String KEY_DTMF_TYPE_ENABLED_BOOL = "dtmf_type_enabled_bool";
/** Flag indicating if auto retry is enabled */
public static final String KEY_AUTO_RETRY_ENABLED_BOOL = "auto_retry_enabled_bool";
/**
* Determine whether we want to play local DTMF tones in a call, or just let the radio/BP handle
* playing of the tones.
*/
public static final String KEY_ALLOW_LOCAL_DTMF_TONES_BOOL = "allow_local_dtmf_tones_bool";
/**
* If true, show an onscreen "Dial" button in the dialer. In practice this is used on all
* platforms, even the ones with hard SEND/END keys, but for maximum flexibility it's controlled
* by a flag here (which can be overridden on a per-product basis.)
*/
public static final String KEY_SHOW_ONSCREEN_DIAL_BUTTON_BOOL = "show_onscreen_dial_button_bool";
/** Determines if device implements a noise suppression device for in call audio. */
public static final String
KEY_HAS_IN_CALL_NOISE_SUPPRESSION_BOOL = "has_in_call_noise_suppression_bool";
/**
* Determines if the current device should allow emergency numbers to be logged in the Call Log.
* (Some carriers require that emergency calls *not* be logged, presumably to avoid the risk of
* accidental redialing from the call log UI. This is a good idea, so the default here is
* false.)
*/
public static final String
KEY_ALLOW_EMERGENCY_NUMBERS_IN_CALL_LOG_BOOL = "allow_emergency_numbers_in_call_log_bool";
/** If true, removes the Voice Privacy option from Call Settings */
public static final String KEY_VOICE_PRIVACY_DISABLE_UI_BOOL = "voice_privacy_disable_ui_bool";
/** Control whether users can reach the carrier portions of Cellular Network Settings. */
public static final String
KEY_HIDE_CARRIER_NETWORK_SETTINGS_BOOL = "hide_carrier_network_settings_bool";
/** Control whether users can reach the SIM lock settings. */
public static final String
KEY_HIDE_SIM_LOCK_SETTINGS_BOOL = "hide_sim_lock_settings_bool";
/** Control whether users can edit APNs in Settings. */
public static final String KEY_APN_EXPAND_BOOL = "apn_expand_bool";
/** Control whether users can choose a network operator. */
public static final String KEY_OPERATOR_SELECTION_EXPAND_BOOL = "operator_selection_expand_bool";
/** Used in Cellular Network Settings for preferred network type. */
public static final String KEY_PREFER_2G_BOOL = "prefer_2g_bool";
/** Show cdma network mode choices 1x, 3G, global etc. */
public static final String KEY_SHOW_CDMA_CHOICES_BOOL = "show_cdma_choices_bool";
/** CDMA activation goes through HFA */
public static final String KEY_USE_HFA_FOR_PROVISIONING_BOOL = "use_hfa_for_provisioning_bool";
/**
* CDMA activation goes through OTASP.
* <p>
* TODO: This should be combined with config_use_hfa_for_provisioning and implemented as an enum
* (NONE, HFA, OTASP).
*/
public static final String KEY_USE_OTASP_FOR_PROVISIONING_BOOL = "use_otasp_for_provisioning_bool";
/** Display carrier settings menu if true */
public static final String KEY_CARRIER_SETTINGS_ENABLE_BOOL = "carrier_settings_enable_bool";
/** Does not display additional call seting for IMS phone based on GSM Phone */
public static final String KEY_ADDITIONAL_CALL_SETTING_BOOL = "additional_call_setting_bool";
/** Show APN Settings for some CDMA carriers */
public static final String KEY_SHOW_APN_SETTING_CDMA_BOOL = "show_apn_setting_cdma_bool";
/** After a CDMA conference call is merged, the swap button should be displayed. */
public static final String KEY_SUPPORT_SWAP_AFTER_MERGE_BOOL = "support_swap_after_merge_bool";
/**
* Determine whether the voicemail notification is persistent in the notification bar. If true,
* the voicemail notifications cannot be dismissed from the notification bar.
*/
public static final String
KEY_VOICEMAIL_NOTIFICATION_PERSISTENT_BOOL = "voicemail_notification_persistent_bool";
/** For IMS video over LTE calls, determines whether video pause signalling is supported. */
public static final String
KEY_SUPPORT_PAUSE_IMS_VIDEO_CALLS_BOOL = "support_pause_ims_video_calls_bool";
/**
* Disables dialing "*228" (OTASP provisioning) on CDMA carriers where it is not supported or is
* potentially harmful by locking the SIM to 3G.
*/
public static final String
KEY_DISABLE_CDMA_ACTIVATION_CODE_BOOL = "disable_cdma_activation_code_bool";
/**
* Override the platform's notion of a network operator being considered roaming.
* Value is string array of MCCMNCs to be considered roaming for 3GPP RATs.
*/
public static final String
KEY_GSM_ROAMING_NETWORKS_STRING_ARRAY = "gsm_roaming_networks_string_array";
/**
* Override the platform's notion of a network operator being considered not roaming.
* Value is string array of MCCMNCs to be considered not roaming for 3GPP RATs.
*/
public static final String
KEY_GSM_NONROAMING_NETWORKS_STRING_ARRAY = "gsm_nonroaming_networks_string_array";
/**
* Override the platform's notion of a network operator being considered roaming.
* Value is string array of SIDs to be considered roaming for 3GPP2 RATs.
*/
public static final String
KEY_CDMA_ROAMING_NETWORKS_STRING_ARRAY = "cdma_roaming_networks_string_array";
/**
* Override the platform's notion of a network operator being considered non roaming.
* Value is string array of SIDs to be considered not roaming for 3GPP2 RATs.
*/
public static final String
KEY_CDMA_NONROAMING_NETWORKS_STRING_ARRAY = "cdma_nonroaming_networks_string_array";
/**
* Override the platform's notion of a network operator being considered non roaming.
* If true all networks are considered as home network a.k.a non-roaming. When false,
* the 2 pairs of CMDA and GSM roaming/non-roaming arrays are consulted.
*
* @see KEY_GSM_ROAMING_NETWORKS_STRING_ARRAY
* @see KEY_GSM_NONROAMING_NETWORKS_STRING_ARRAY
* @see KEY_CDMA_ROAMING_NETWORKS_STRING_ARRAY
* @see KEY_CDMA_NONROAMING_NETWORKS_STRING_ARRAY
*/
public static final String
KEY_FORCE_HOME_NETWORK_BOOL = "force_home_network_bool";
/**
* Flag specifying whether VoLTE should be available for carrier, independent of carrier
* provisioning. If false: hard disabled. If true: then depends on carrier provisioning,
* availability, etc.
*/
public static final String KEY_CARRIER_VOLTE_AVAILABLE_BOOL = "carrier_volte_available_bool";
/**
* Flag specifying whether video telephony is available for carrier. If false: hard disabled.
* If true: then depends on carrier provisioning, availability, etc.
*/
public static final String KEY_CARRIER_VT_AVAILABLE_BOOL = "carrier_vt_available_bool";
/**
* Flag specifying whether WFC over IMS should be available for carrier: independent of
* carrier provisioning. If false: hard disabled. If true: then depends on carrier
* provisioning, availability etc.
*/
public static final String KEY_CARRIER_WFC_IMS_AVAILABLE_BOOL = "carrier_wfc_ims_available_bool";
/**
* Flag specifying whether WFC over IMS supports the "wifi only" option. If false, the wifi
* calling settings will not include an option for "wifi only". If true, the wifi calling
* settings will include an option for "wifi only"
* <p>
* By default, it is assumed that WFC supports "wifi only".
*/
public static final String KEY_CARRIER_WFC_SUPPORTS_WIFI_ONLY_BOOL =
"carrier_wfc_supports_wifi_only_bool";
/**
* Default WFC_IMS_mode 0: WIFI_ONLY
* 1: CELLULAR_PREFERRED
* 2: WIFI_PREFERRED
* @hide
*/
public static final String KEY_CARRIER_DEFAULT_WFC_IMS_MODE_INT =
"carrier_default_wfc_ims_mode_int";
/**
* Default WFC_IMS_enabled: true VoWiFi by default is on
* false VoWiFi by default is off
* @hide
*/
public static final String KEY_CARRIER_DEFAULT_WFC_IMS_ENABLED_BOOL =
"carrier_default_wfc_ims_enabled_bool";
/**
* Default WFC_IMS_roaming_enabled: true VoWiFi roaming by default is on
* false VoWiFi roaming by default is off
* @hide
*/
public static final String KEY_CARRIER_DEFAULT_WFC_IMS_ROAMING_ENABLED_BOOL =
"carrier_default_wfc_ims_roaming_enabled_bool";
/** Flag specifying whether provisioning is required for VOLTE. */
public static final String KEY_CARRIER_VOLTE_PROVISIONING_REQUIRED_BOOL
= "carrier_volte_provisioning_required_bool";
/** Flag specifying whether VoLTE TTY is supported. */
public static final String KEY_CARRIER_VOLTE_TTY_SUPPORTED_BOOL
= "carrier_volte_tty_supported_bool";
/**
* Flag specifying whether IMS service can be turned off. If false then the service will not be
* turned-off completely, but individual features can be disabled.
*/
public static final String KEY_CARRIER_ALLOW_TURNOFF_IMS_BOOL
= "carrier_allow_turnoff_ims_bool";
/**
* Flag specifying whether Generic Bootstrapping Architecture capable SIM is required for IMS.
*/
public static final String KEY_CARRIER_IMS_GBA_REQUIRED_BOOL
= "carrier_ims_gba_required_bool";
/**
* Flag specifying whether IMS instant lettering is available for the carrier. {@code True} if
* instant lettering is available for the carrier, {@code false} otherwise.
*/
public static final String KEY_CARRIER_INSTANT_LETTERING_AVAILABLE_BOOL =
"carrier_instant_lettering_available_bool";
/*
* Flag specifying whether IMS should be the first phone attempted for E911 even if the
* phone is not in service.
*/
public static final String KEY_CARRIER_USE_IMS_FIRST_FOR_EMERGENCY_BOOL
= "carrier_use_ims_first_for_emergency_bool";
/**
* When IMS instant lettering is available for a carrier (see
* {@link #KEY_CARRIER_INSTANT_LETTERING_AVAILABLE_BOOL}), determines the list of characters
* which may not be contained in messages. Should be specified as a regular expression suitable
* for use with {@link String#matches(String)}.
*/
public static final String KEY_CARRIER_INSTANT_LETTERING_INVALID_CHARS_STRING =
"carrier_instant_lettering_invalid_chars_string";
/**
* When IMS instant lettering is available for a carrier (see
* {@link #KEY_CARRIER_INSTANT_LETTERING_AVAILABLE_BOOL}), determines a list of characters which
* must be escaped with a backslash '\' character. Should be specified as a string containing
* the characters to be escaped. For example to escape quote and backslash the string would be
* a quote and a backslash.
*/
public static final String KEY_CARRIER_INSTANT_LETTERING_ESCAPED_CHARS_STRING =
"carrier_instant_lettering_escaped_chars_string";
/**
* When IMS instant lettering is available for a carrier (see
* {@link #KEY_CARRIER_INSTANT_LETTERING_AVAILABLE_BOOL}), determines the character encoding
* which will be used when determining the length of messages. Used in the InCall UI to limit
* the number of characters the user may type. If empty-string, the instant lettering
* message size limit will be enforced on a 1:1 basis. That is, each character will count
* towards the messages size limit as a single bye. If a character encoding is specified, the
* message size limit will be based on the number of bytes in the message per the specified
* encoding.
*/
public static final String KEY_CARRIER_INSTANT_LETTERING_ENCODING_STRING =
"carrier_instant_lettering_encoding_string";
/**
* When IMS instant lettering is available for a carrier (see
* {@link #KEY_CARRIER_INSTANT_LETTERING_AVAILABLE_BOOL}), the length limit for messages. Used
* in the InCall UI to ensure the user cannot enter more characters than allowed by the carrier.
* See also {@link #KEY_CARRIER_INSTANT_LETTERING_ENCODING_STRING} for more information on how
* the length of the message is calculated.
*/
public static final String KEY_CARRIER_INSTANT_LETTERING_LENGTH_LIMIT_INT =
"carrier_instant_lettering_length_limit_int";
/**
* If Voice Radio Technology is RIL_RADIO_TECHNOLOGY_LTE:14 or RIL_RADIO_TECHNOLOGY_UNKNOWN:0
* this is the value that should be used instead. A configuration value of
* RIL_RADIO_TECHNOLOGY_UNKNOWN:0 means there is no replacement value and that the default
* assumption for phone type (GSM) should be used.
*/
public static final String KEY_VOLTE_REPLACEMENT_RAT_INT = "volte_replacement_rat_int";
/**
* The default sim call manager to use when the default dialer doesn't implement one. A sim call
* manager can control and route outgoing and incoming phone calls, even if they're placed
* using another connection service (PSTN, for example).
*/
public static final String KEY_DEFAULT_SIM_CALL_MANAGER_STRING = "default_sim_call_manager_string";
/**
* The default flag specifying whether ETWS/CMAS test setting is forcibly disabled in
* Settings->More->Emergency broadcasts menu even though developer options is turned on.
*/
public static final String KEY_CARRIER_FORCE_DISABLE_ETWS_CMAS_TEST_BOOL =
"carrier_force_disable_etws_cmas_test_bool";
/**
* The default flag specifying whether "Turn on Notifications" option will be always shown in
* Settings->More->Emergency broadcasts menu regardless developer options is turned on or not.
*/
public static final String KEY_ALWAYS_SHOW_EMERGENCY_ALERT_ONOFF_BOOL =
"always_show_emergency_alert_onoff_bool";
/**
* The data call APN retry configuration for default type APN.
* @hide
*/
public static final String KEY_CARRIER_DATA_CALL_RETRY_CONFIG_DEFAULT_STRING =
"carrier_data_call_retry_config_default_string";
/**
* The data call APN retry configuration for other type APNs.
* @hide
*/
public static final String KEY_CARRIER_DATA_CALL_RETRY_CONFIG_OTHERS_STRING =
"carrier_data_call_retry_config_others_string";
/**
* Delay between trying APN from the pool
* @hide
*/
public static final String KEY_CARRIER_DATA_CALL_APN_DELAY_DEFAULT_LONG =
"carrier_data_call_apn_delay_default_long";
/**
* Faster delay between trying APN from the pool
* @hide
*/
public static final String KEY_CARRIER_DATA_CALL_APN_DELAY_FASTER_LONG =
"carrier_data_call_apn_delay_faster_long";
/**
* Default APN types that are metered by the carrier
* @hide
*/
public static final String KEY_CARRIER_METERED_APN_TYPES_STRINGS =
"carrier_metered_apn_types_strings";
/**
* CDMA carrier ERI (Enhanced Roaming Indicator) file name
* @hide
*/
public static final String KEY_CARRIER_ERI_FILE_NAME_STRING =
"carrier_eri_file_name_string";
/* The following 3 fields are related to carrier visual voicemail. */
/**
* The carrier number mobile outgoing (MO) sms messages are sent to.
*/
public static final String KEY_VVM_DESTINATION_NUMBER_STRING = "vvm_destination_number_string";
/**
* The port through which the mobile outgoing (MO) sms messages are sent through.
*/
public static final String KEY_VVM_PORT_NUMBER_INT = "vvm_port_number_int";
/**
* The type of visual voicemail protocol the carrier adheres to. See {@link TelephonyManager}
* for possible values. For example {@link TelephonyManager#VVM_TYPE_OMTP}.
*/
public static final String KEY_VVM_TYPE_STRING = "vvm_type_string";
/**
* Whether cellular data is required to access visual voicemail.
*/
public static final String KEY_VVM_CELLULAR_DATA_REQUIRED_BOOLEAN = "vvm_cellular_data_required";
/**
* Whether to prefetch audio data on new voicemail arrival, defaulted to true.
*/
public static final String KEY_VVM_PREFETCH_BOOLEAN = "vvm_prefetch";
/**
* The package name of the carrier's visual voicemail app to ensure that dialer visual voicemail
* and carrier visual voicemail are not active at the same time.
*/
public static final String KEY_CARRIER_VVM_PACKAGE_NAME_STRING = "carrier_vvm_package_name_string";
/**
* Flag specifying whether ICCID is showed in SIM Status screen, default to false.
*/
public static final String KEY_SHOW_ICCID_IN_SIM_STATUS_BOOL = "show_iccid_in_sim_status_bool";
/**
* Flag specifying whether an additional (client initiated) intent needs to be sent on System
* update
*/
public static final String KEY_CI_ACTION_ON_SYS_UPDATE_BOOL = "ci_action_on_sys_update_bool";
/**
* Intent to be sent for the additional action on System update
*/
public static final String KEY_CI_ACTION_ON_SYS_UPDATE_INTENT_STRING =
"ci_action_on_sys_update_intent_string";
/**
* Extra to be included in the intent sent for additional action on System update
*/
public static final String KEY_CI_ACTION_ON_SYS_UPDATE_EXTRA_STRING =
"ci_action_on_sys_update_extra_string";
/**
* Value of extra included in intent sent for additional action on System update
*/
public static final String KEY_CI_ACTION_ON_SYS_UPDATE_EXTRA_VAL_STRING =
"ci_action_on_sys_update_extra_val_string";
/**
* Specifies the amount of gap to be added in millis between postdial DTMF tones. When a
* non-zero value is specified, the UE shall wait for the specified amount of time before it
* sends out successive DTMF tones on the network.
*/
public static final String KEY_GSM_DTMF_TONE_DELAY_INT = "gsm_dtmf_tone_delay_int";
/**
* Specifies the amount of gap to be added in millis between DTMF tones. When a non-zero value
* is specified, the UE shall wait for the specified amount of time before it sends out
* successive DTMF tones on the network.
*/
public static final String KEY_IMS_DTMF_TONE_DELAY_INT = "ims_dtmf_tone_delay_int";
/**
* Specifies the amount of gap to be added in millis between postdial DTMF tones. When a
* non-zero value is specified, the UE shall wait for the specified amount of time before it
* sends out successive DTMF tones on the network.
*/
public static final String KEY_CDMA_DTMF_TONE_DELAY_INT = "cdma_dtmf_tone_delay_int";
/**
* Determines whether conference calls are supported by a carrier. When {@code true},
* conference calling is supported, {@code false otherwise}.
*/
public static final String KEY_SUPPORT_CONFERENCE_CALL_BOOL = "support_conference_call_bool";
/**
* Determine whether user can toggle Enhanced 4G LTE Mode in Settings.
*/
public static final String KEY_EDITABLE_ENHANCED_4G_LTE_BOOL = "editable_enhanced_4g_lte_bool";
/**
* Determine whether IMS apn can be shown.
*/
public static final String KEY_HIDE_IMS_APN_BOOL = "hide_ims_apn_bool";
/**
* Determine whether preferred network type can be shown.
*/
public static final String KEY_HIDE_PREFERRED_NETWORK_TYPE_BOOL = "hide_preferred_network_type_bool";
/**
* Determine whether user can switch Wi-Fi preferred or Cellular preferred in calling preference.
* Some operators support Wi-Fi Calling only, not VoLTE.
* They don't need "Cellular preferred" option.
* In this case, set uneditalbe attribute for preferred preference.
* @hide
*/
public static final String KEY_EDITABLE_WFC_MODE_BOOL = "editable_wfc_mode_bool";
/**
* Flag to indicate if Wi-Fi needs to be disabled in ECBM
* @hide
**/
public static final String
KEY_CONFIG_WIFI_DISABLE_IN_ECBM = "config_wifi_disable_in_ecbm";
/**
* List operator-specific error codes and indices of corresponding error strings in
* wfcOperatorErrorAlertMessages and wfcOperatorErrorNotificationMessages.
*
* Example: "REG09|0" specifies error code "REG09" and index "0". This index will be
* used to find alert and notification messages in wfcOperatorErrorAlertMessages and
* wfcOperatorErrorNotificationMessages.
*
* @hide
*/
public static final String KEY_WFC_OPERATOR_ERROR_CODES_STRING_ARRAY =
"wfc_operator_error_codes_string_array";
/**
* Indexes of SPN format strings in wfcSpnFormats and wfcDataSpnFormats.
* @hide
*/
public static final String KEY_WFC_SPN_FORMAT_IDX_INT = "wfc_spn_format_idx_int";
/** @hide */
public static final String KEY_WFC_DATA_SPN_FORMAT_IDX_INT = "wfc_data_spn_format_idx_int";
/**
* If this is true, the SIM card (through Customer Service Profile EF file) will be able to
* prevent manual operator selection. If false, this SIM setting will be ignored and manual
* operator selection will always be available. See CPHS4_2.WW6, CPHS B.4.7.1 for more
* information
*/
public static final String KEY_CSP_ENABLED_BOOL = "csp_enabled_bool";
/**
* Allow user to add APNs
*/
public static final String KEY_ALLOW_ADDING_APNS_BOOL = "allow_adding_apns_bool";
/**
* Boolean indicating if intent for emergency call state changes should be broadcast
* @hide
*/
public static final String KEY_BROADCAST_EMERGENCY_CALL_STATE_CHANGES_BOOL =
"broadcast_emergency_call_state_changes_bool";
// These variables are used by the MMS service and exposed through another API, {@link
// SmsManager}. The variable names and string values are copied from there.
public static final String KEY_MMS_ALIAS_ENABLED_BOOL = "aliasEnabled";
public static final String KEY_MMS_ALLOW_ATTACH_AUDIO_BOOL = "allowAttachAudio";
public static final String KEY_MMS_APPEND_TRANSACTION_ID_BOOL = "enabledTransID";
public static final String KEY_MMS_GROUP_MMS_ENABLED_BOOL = "enableGroupMms";
public static final String KEY_MMS_MMS_DELIVERY_REPORT_ENABLED_BOOL = "enableMMSDeliveryReports";
public static final String KEY_MMS_MMS_ENABLED_BOOL = "enabledMMS";
public static final String KEY_MMS_MMS_READ_REPORT_ENABLED_BOOL = "enableMMSReadReports";
public static final String KEY_MMS_MULTIPART_SMS_ENABLED_BOOL = "enableMultipartSMS";
public static final String KEY_MMS_NOTIFY_WAP_MMSC_ENABLED_BOOL = "enabledNotifyWapMMSC";
public static final String KEY_MMS_SEND_MULTIPART_SMS_AS_SEPARATE_MESSAGES_BOOL = "sendMultipartSmsAsSeparateMessages";
public static final String KEY_MMS_SHOW_CELL_BROADCAST_APP_LINKS_BOOL = "config_cellBroadcastAppLinks";
public static final String KEY_MMS_SMS_DELIVERY_REPORT_ENABLED_BOOL = "enableSMSDeliveryReports";
public static final String KEY_MMS_SUPPORT_HTTP_CHARSET_HEADER_BOOL = "supportHttpCharsetHeader";
public static final String KEY_MMS_SUPPORT_MMS_CONTENT_DISPOSITION_BOOL = "supportMmsContentDisposition";
public static final String KEY_MMS_ALIAS_MAX_CHARS_INT = "aliasMaxChars";
public static final String KEY_MMS_ALIAS_MIN_CHARS_INT = "aliasMinChars";
public static final String KEY_MMS_HTTP_SOCKET_TIMEOUT_INT = "httpSocketTimeout";
public static final String KEY_MMS_MAX_IMAGE_HEIGHT_INT = "maxImageHeight";
public static final String KEY_MMS_MAX_IMAGE_WIDTH_INT = "maxImageWidth";
public static final String KEY_MMS_MAX_MESSAGE_SIZE_INT = "maxMessageSize";
public static final String KEY_MMS_MESSAGE_TEXT_MAX_SIZE_INT = "maxMessageTextSize";
public static final String KEY_MMS_RECIPIENT_LIMIT_INT = "recipientLimit";
public static final String KEY_MMS_SMS_TO_MMS_TEXT_LENGTH_THRESHOLD_INT = "smsToMmsTextLengthThreshold";
public static final String KEY_MMS_SMS_TO_MMS_TEXT_THRESHOLD_INT = "smsToMmsTextThreshold";
public static final String KEY_MMS_SUBJECT_MAX_LENGTH_INT = "maxSubjectLength";
public static final String KEY_MMS_EMAIL_GATEWAY_NUMBER_STRING = "emailGatewayNumber";
public static final String KEY_MMS_HTTP_PARAMS_STRING = "httpParams";
public static final String KEY_MMS_NAI_SUFFIX_STRING = "naiSuffix";
public static final String KEY_MMS_UA_PROF_TAG_NAME_STRING = "uaProfTagName";
public static final String KEY_MMS_UA_PROF_URL_STRING = "uaProfUrl";
public static final String KEY_MMS_USER_AGENT_STRING = "userAgent";
/**
* Determines whether the carrier supports making non-emergency phone calls while the phone is
* in emergency callback mode. Default value is {@code true}, meaning that non-emergency calls
* are allowed in emergency callback mode.
*/
public static final String KEY_ALLOW_NON_EMERGENCY_CALLS_IN_ECM_BOOL =
"allow_non_emergency_calls_in_ecm_bool";
/**
* Flag indicating whether to allow carrier video calls to emergency numbers.
* When {@code true}, video calls to emergency numbers will be allowed. When {@code false},
* video calls to emergency numbers will be initiated as audio-only calls instead.
*/
public static final String KEY_ALLOW_EMERGENCY_VIDEO_CALLS_BOOL =
"allow_emergency_video_calls_bool";
/**
* Flag indicating whether the carrier supports RCS presence indication for video calls. When
* {@code true}, the carrier supports RCS presence indication for video calls. When presence
* is supported, the device should use the
* {@link android.provider.ContactsContract.Data#CARRIER_PRESENCE} bit mask and set the
* {@link android.provider.ContactsContract.Data#CARRIER_PRESENCE_VT_CAPABLE} bit to indicate
* whether each contact supports video calling. The UI is made aware that presence is enabled
* via {@link android.telecom.PhoneAccount#CAPABILITY_VIDEO_CALLING_RELIES_ON_PRESENCE}
* and can choose to hide or show the video calling icon based on whether a contact supports
* video.
*/
public static final String KEY_USE_RCS_PRESENCE_BOOL = "use_rcs_presence_bool";
/**
* The duration in seconds that platform call and message blocking is disabled after the user
* contacts emergency services. Platform considers values in the range 0 to 604800 (one week) as
* valid. See {@link android.provider.BlockedNumberContract#isBlocked(Context, String)}).
*/
public static final String KEY_DURATION_BLOCKING_DISABLED_AFTER_EMERGENCY_INT =
"duration_blocking_disabled_after_emergency_int";
/** The default value for every variable. */
private final static PersistableBundle sDefaults;
static {
sDefaults = new PersistableBundle();
sDefaults.putBoolean(KEY_ADDITIONAL_CALL_SETTING_BOOL, true);
sDefaults.putBoolean(KEY_ALLOW_EMERGENCY_NUMBERS_IN_CALL_LOG_BOOL, false);
sDefaults.putBoolean(KEY_ALLOW_LOCAL_DTMF_TONES_BOOL, true);
sDefaults.putBoolean(KEY_APN_EXPAND_BOOL, true);
sDefaults.putBoolean(KEY_AUTO_RETRY_ENABLED_BOOL, false);
sDefaults.putBoolean(KEY_CARRIER_SETTINGS_ENABLE_BOOL, false);
sDefaults.putBoolean(KEY_CARRIER_VOLTE_AVAILABLE_BOOL, false);
sDefaults.putBoolean(KEY_CARRIER_VT_AVAILABLE_BOOL, false);
sDefaults.putBoolean(KEY_CARRIER_WFC_IMS_AVAILABLE_BOOL, false);
sDefaults.putBoolean(KEY_CARRIER_WFC_SUPPORTS_WIFI_ONLY_BOOL, true);
sDefaults.putBoolean(KEY_CARRIER_DEFAULT_WFC_IMS_ENABLED_BOOL, false);
sDefaults.putBoolean(KEY_CARRIER_DEFAULT_WFC_IMS_ROAMING_ENABLED_BOOL, false);
sDefaults.putInt(KEY_CARRIER_DEFAULT_WFC_IMS_MODE_INT, 2);
sDefaults.putBoolean(KEY_CARRIER_FORCE_DISABLE_ETWS_CMAS_TEST_BOOL, false);
sDefaults.putBoolean(KEY_CARRIER_VOLTE_PROVISIONING_REQUIRED_BOOL, false);
sDefaults.putBoolean(KEY_CARRIER_VOLTE_TTY_SUPPORTED_BOOL, true);
sDefaults.putBoolean(KEY_CARRIER_ALLOW_TURNOFF_IMS_BOOL, true);
sDefaults.putBoolean(KEY_CARRIER_IMS_GBA_REQUIRED_BOOL, false);
sDefaults.putBoolean(KEY_CARRIER_INSTANT_LETTERING_AVAILABLE_BOOL, false);
sDefaults.putBoolean(KEY_CARRIER_USE_IMS_FIRST_FOR_EMERGENCY_BOOL, true);
sDefaults.putString(KEY_CARRIER_INSTANT_LETTERING_INVALID_CHARS_STRING, "");
sDefaults.putString(KEY_CARRIER_INSTANT_LETTERING_ESCAPED_CHARS_STRING, "");
sDefaults.putString(KEY_CARRIER_INSTANT_LETTERING_ENCODING_STRING, "");
sDefaults.putInt(KEY_CARRIER_INSTANT_LETTERING_LENGTH_LIMIT_INT, 64);
sDefaults.putBoolean(KEY_DISABLE_CDMA_ACTIVATION_CODE_BOOL, false);
sDefaults.putBoolean(KEY_DTMF_TYPE_ENABLED_BOOL, false);
sDefaults.putBoolean(KEY_ENABLE_DIALER_KEY_VIBRATION_BOOL, true);
sDefaults.putBoolean(KEY_HAS_IN_CALL_NOISE_SUPPRESSION_BOOL, false);
sDefaults.putBoolean(KEY_HIDE_CARRIER_NETWORK_SETTINGS_BOOL, false);
sDefaults.putBoolean(KEY_HIDE_SIM_LOCK_SETTINGS_BOOL, false);
sDefaults.putBoolean(KEY_IGNORE_SIM_NETWORK_LOCKED_EVENTS_BOOL, false);
sDefaults.putBoolean(KEY_OPERATOR_SELECTION_EXPAND_BOOL, true);
sDefaults.putBoolean(KEY_PREFER_2G_BOOL, true);
sDefaults.putBoolean(KEY_SHOW_APN_SETTING_CDMA_BOOL, false);
sDefaults.putBoolean(KEY_SHOW_CDMA_CHOICES_BOOL, false);
sDefaults.putBoolean(KEY_SHOW_ONSCREEN_DIAL_BUTTON_BOOL, true);
sDefaults.putBoolean(KEY_SIM_NETWORK_UNLOCK_ALLOW_DISMISS_BOOL, true);
sDefaults.putBoolean(KEY_SUPPORT_PAUSE_IMS_VIDEO_CALLS_BOOL, false);
sDefaults.putBoolean(KEY_SUPPORT_SWAP_AFTER_MERGE_BOOL, true);
sDefaults.putBoolean(KEY_USE_HFA_FOR_PROVISIONING_BOOL, false);
sDefaults.putBoolean(KEY_USE_OTASP_FOR_PROVISIONING_BOOL, false);
sDefaults.putBoolean(KEY_VOICEMAIL_NOTIFICATION_PERSISTENT_BOOL, false);
sDefaults.putBoolean(KEY_VOICE_PRIVACY_DISABLE_UI_BOOL, false);
sDefaults.putBoolean(KEY_WORLD_PHONE_BOOL, false);
sDefaults.putBoolean(KEY_REQUIRE_ENTITLEMENT_CHECKS_BOOL, true);
sDefaults.putInt(KEY_VOLTE_REPLACEMENT_RAT_INT, 0);
sDefaults.putString(KEY_DEFAULT_SIM_CALL_MANAGER_STRING, "");
sDefaults.putString(KEY_VVM_DESTINATION_NUMBER_STRING, "");
sDefaults.putInt(KEY_VVM_PORT_NUMBER_INT, 0);
sDefaults.putString(KEY_VVM_TYPE_STRING, "");
sDefaults.putBoolean(KEY_VVM_CELLULAR_DATA_REQUIRED_BOOLEAN, false);
sDefaults.putBoolean(KEY_VVM_PREFETCH_BOOLEAN, true);
sDefaults.putString(KEY_CARRIER_VVM_PACKAGE_NAME_STRING, "");
sDefaults.putBoolean(KEY_SHOW_ICCID_IN_SIM_STATUS_BOOL, false);
sDefaults.putBoolean(KEY_CI_ACTION_ON_SYS_UPDATE_BOOL, false);
sDefaults.putString(KEY_CI_ACTION_ON_SYS_UPDATE_INTENT_STRING, "");
sDefaults.putString(KEY_CI_ACTION_ON_SYS_UPDATE_EXTRA_STRING, "");
sDefaults.putString(KEY_CI_ACTION_ON_SYS_UPDATE_EXTRA_VAL_STRING, "");
sDefaults.putBoolean(KEY_CSP_ENABLED_BOOL, false);
sDefaults.putBoolean(KEY_ALLOW_ADDING_APNS_BOOL, true);
sDefaults.putBoolean(KEY_BROADCAST_EMERGENCY_CALL_STATE_CHANGES_BOOL, false);
sDefaults.putBoolean(KEY_ALWAYS_SHOW_EMERGENCY_ALERT_ONOFF_BOOL, false);
sDefaults.putString(KEY_CARRIER_DATA_CALL_RETRY_CONFIG_DEFAULT_STRING,
"default_randomization=2000,5000,10000,20000,40000,80000:5000,160000:5000,"
+ "320000:5000,640000:5000,1280000:5000,1800000:5000");
sDefaults.putString(KEY_CARRIER_DATA_CALL_RETRY_CONFIG_OTHERS_STRING,
"max_retries=3, 5000, 5000, 5000");
sDefaults.putLong(KEY_CARRIER_DATA_CALL_APN_DELAY_DEFAULT_LONG, 20000);
sDefaults.putLong(KEY_CARRIER_DATA_CALL_APN_DELAY_FASTER_LONG, 3000);
sDefaults.putString(KEY_CARRIER_ERI_FILE_NAME_STRING, "eri.xml");
sDefaults.putInt(KEY_DURATION_BLOCKING_DISABLED_AFTER_EMERGENCY_INT, 7200);
sDefaults.putStringArray(KEY_CARRIER_METERED_APN_TYPES_STRINGS,
new String[]{"default", "mms", "dun", "supl"});
sDefaults.putStringArray(KEY_GSM_ROAMING_NETWORKS_STRING_ARRAY, null);
sDefaults.putStringArray(KEY_GSM_NONROAMING_NETWORKS_STRING_ARRAY, null);
sDefaults.putStringArray(KEY_CDMA_ROAMING_NETWORKS_STRING_ARRAY, null);
sDefaults.putStringArray(KEY_CDMA_NONROAMING_NETWORKS_STRING_ARRAY, null);
sDefaults.putBoolean(KEY_FORCE_HOME_NETWORK_BOOL, false);
sDefaults.putInt(KEY_GSM_DTMF_TONE_DELAY_INT, 0);
sDefaults.putInt(KEY_IMS_DTMF_TONE_DELAY_INT, 0);
sDefaults.putInt(KEY_CDMA_DTMF_TONE_DELAY_INT, 100);
sDefaults.putBoolean(KEY_SUPPORT_CONFERENCE_CALL_BOOL, true);
sDefaults.putBoolean(KEY_EDITABLE_ENHANCED_4G_LTE_BOOL, true);
sDefaults.putBoolean(KEY_HIDE_IMS_APN_BOOL, false);
sDefaults.putBoolean(KEY_HIDE_PREFERRED_NETWORK_TYPE_BOOL, false);
sDefaults.putBoolean(KEY_ALLOW_EMERGENCY_VIDEO_CALLS_BOOL, false);
sDefaults.putBoolean(KEY_EDITABLE_WFC_MODE_BOOL, true);
sDefaults.putStringArray(KEY_WFC_OPERATOR_ERROR_CODES_STRING_ARRAY, null);
sDefaults.putInt(KEY_WFC_SPN_FORMAT_IDX_INT, 0);
sDefaults.putInt(KEY_WFC_DATA_SPN_FORMAT_IDX_INT, 0);
sDefaults.putBoolean(KEY_CONFIG_WIFI_DISABLE_IN_ECBM, false);
// MMS defaults
sDefaults.putBoolean(KEY_MMS_ALIAS_ENABLED_BOOL, false);
sDefaults.putBoolean(KEY_MMS_ALLOW_ATTACH_AUDIO_BOOL, true);
sDefaults.putBoolean(KEY_MMS_APPEND_TRANSACTION_ID_BOOL, false);
sDefaults.putBoolean(KEY_MMS_GROUP_MMS_ENABLED_BOOL, true);
sDefaults.putBoolean(KEY_MMS_MMS_DELIVERY_REPORT_ENABLED_BOOL, false);
sDefaults.putBoolean(KEY_MMS_MMS_ENABLED_BOOL, true);
sDefaults.putBoolean(KEY_MMS_MMS_READ_REPORT_ENABLED_BOOL, false);
sDefaults.putBoolean(KEY_MMS_MULTIPART_SMS_ENABLED_BOOL, true);
sDefaults.putBoolean(KEY_MMS_NOTIFY_WAP_MMSC_ENABLED_BOOL, false);
sDefaults.putBoolean(KEY_MMS_SEND_MULTIPART_SMS_AS_SEPARATE_MESSAGES_BOOL, false);
sDefaults.putBoolean(KEY_MMS_SHOW_CELL_BROADCAST_APP_LINKS_BOOL, true);
sDefaults.putBoolean(KEY_MMS_SMS_DELIVERY_REPORT_ENABLED_BOOL, true);
sDefaults.putBoolean(KEY_MMS_SUPPORT_HTTP_CHARSET_HEADER_BOOL, false);
sDefaults.putBoolean(KEY_MMS_SUPPORT_MMS_CONTENT_DISPOSITION_BOOL, true);
sDefaults.putInt(KEY_MMS_ALIAS_MAX_CHARS_INT, 48);
sDefaults.putInt(KEY_MMS_ALIAS_MIN_CHARS_INT, 2);
sDefaults.putInt(KEY_MMS_HTTP_SOCKET_TIMEOUT_INT, 60 * 1000);
sDefaults.putInt(KEY_MMS_MAX_IMAGE_HEIGHT_INT, 480);
sDefaults.putInt(KEY_MMS_MAX_IMAGE_WIDTH_INT, 640);
sDefaults.putInt(KEY_MMS_MAX_MESSAGE_SIZE_INT, 300 * 1024);
sDefaults.putInt(KEY_MMS_MESSAGE_TEXT_MAX_SIZE_INT, -1);
sDefaults.putInt(KEY_MMS_RECIPIENT_LIMIT_INT, Integer.MAX_VALUE);
sDefaults.putInt(KEY_MMS_SMS_TO_MMS_TEXT_LENGTH_THRESHOLD_INT, -1);
sDefaults.putInt(KEY_MMS_SMS_TO_MMS_TEXT_THRESHOLD_INT, -1);
sDefaults.putInt(KEY_MMS_SUBJECT_MAX_LENGTH_INT, 40);
sDefaults.putString(KEY_MMS_EMAIL_GATEWAY_NUMBER_STRING, "");
sDefaults.putString(KEY_MMS_HTTP_PARAMS_STRING, "");
sDefaults.putString(KEY_MMS_NAI_SUFFIX_STRING, "");
sDefaults.putString(KEY_MMS_UA_PROF_TAG_NAME_STRING, "x-wap-profile");
sDefaults.putString(KEY_MMS_UA_PROF_URL_STRING, "");
sDefaults.putString(KEY_MMS_USER_AGENT_STRING, "");
sDefaults.putBoolean(KEY_ALLOW_NON_EMERGENCY_CALLS_IN_ECM_BOOL, true);
sDefaults.putBoolean(KEY_USE_RCS_PRESENCE_BOOL, false);
}
/**
* Gets the configuration values for a particular subscription, which is associated with a
* specific SIM card. If an invalid subId is used, the returned config will contain default
* values.
*
* <p>Requires Permission:
* {@link android.Manifest.permission#READ_PHONE_STATE READ_PHONE_STATE}
*
* @param subId the subscription ID, normally obtained from {@link SubscriptionManager}.
* @return A {@link PersistableBundle} containing the config for the given subId, or default
* values for an invalid subId.
*
* @deprecated use getConfig.
*/
@Nullable
public PersistableBundle getConfigForSubId(int subId) {
return getConfig(subId);
}
/**
* Gets the configuration values for a particular subscription, which is associated with a
* specific SIM card. If an invalid subId is used, the returned config will contain default
* values.
*
* <p>Requires Permission:
* {@link android.Manifest.permission#READ_PHONE_STATE READ_PHONE_STATE}
*
* @param subId the subscription ID, normally obtained from {@link SubscriptionManager}.
* @return A {@link PersistableBundle} containing the config for the given subId, or default
* values for an invalid subId.
*/
@Nullable
public PersistableBundle getConfig(int subId) {
try {
ICarrierConfigLoader loader = getICarrierConfigLoader();
if (loader == null) {
Rlog.w(TAG, "Error getting config for subId " + subId
+ " ICarrierConfigLoader is null");
return null;
}
return loader.getConfigForSubId(subId);
} catch (RemoteException ex) {
Rlog.e(TAG, "Error getting config for subId " + subId + ": "
+ ex.toString());
}
return null;
}
/**
* Gets the configuration values for the default subscription.
*
* <p>Requires Permission:
* {@link android.Manifest.permission#READ_PHONE_STATE READ_PHONE_STATE}
*
* @return A {@link PersistableBundle} containing the config for the default subscription.
*/
@Nullable
public PersistableBundle getConfig() {
return getConfig(SubscriptionManager.getDefaultSubscriptionId());
}
/**
* Calling this method triggers telephony services to fetch the current carrier configuration.
* <p>
* Normally this does not need to be called because the platform reloads config on its own.
* This should be called by a carrier service app if it wants to update config at an arbitrary
* moment.
* </p>
* <p>Requires that the calling app has carrier privileges.
* @see #hasCarrierPrivileges
* <p>
* This method returns before the reload has completed, and
* {@link android.service.carrier.CarrierService#onLoadConfig} will be called from an
* arbitrary thread.
* </p>
*
* @deprecated use notifyConfigChanged.
*/
public void notifyConfigChangedForSubId(int subId) {
notifyConfigChanged(subId);
}
/**
* Calling this method triggers telephony services to fetch the current carrier configuration.
* <p>
* Normally this does not need to be called because the platform reloads config on its own.
* This should be called by a carrier service app if it wants to update config at an arbitrary
* moment.
* </p>
* <p>Requires that the calling app has carrier privileges.
* @see #hasCarrierPrivileges
* <p>
* This method returns before the reload has completed, and
* {@link android.service.carrier.CarrierService#onLoadConfig} will be called from an
* arbitrary thread.
* </p>
*/
public void notifyConfigChanged(int subId) {
try {
ICarrierConfigLoader loader = getICarrierConfigLoader();
if (loader == null) {
Rlog.w(TAG, "Error reloading config for subId=" + subId
+ " ICarrierConfigLoader is null");
return;
}
loader.notifyConfigChangedForSubId(subId);
} catch (RemoteException ex) {
Rlog.e(TAG, "Error reloading config for subId=" + subId + ": " + ex.toString());
}
}
/**
* Request the carrier config loader to update the cofig for phoneId.
* <p>
* Depending on simState, the config may be cleared or loaded from config app. This is only used
* by SubscriptionInfoUpdater.
* </p>
*
* @hide
*/
@SystemApi
public void updateConfigForPhoneId(int phoneId, String simState) {
try {
ICarrierConfigLoader loader = getICarrierConfigLoader();
if (loader == null) {
Rlog.w(TAG, "Error updating config for phoneId=" + phoneId
+ " ICarrierConfigLoader is null");
return;
}
loader.updateConfigForPhoneId(phoneId, simState);
} catch (RemoteException ex) {
Rlog.e(TAG, "Error updating config for phoneId=" + phoneId + ": " + ex.toString());
}
}
/**
* Returns a new bundle with the default value for every supported configuration variable.
*
* @hide
*/
@NonNull
@SystemApi
public static PersistableBundle getDefaultConfig() {
return new PersistableBundle(sDefaults);
}
/** @hide */
@Nullable
private ICarrierConfigLoader getICarrierConfigLoader() {
return ICarrierConfigLoader.Stub
.asInterface(ServiceManager.getService(Context.CARRIER_CONFIG_SERVICE));
}
}