This may mean that secondary networks have bad network settings,
but currently default settings are overriden by secondary nets
which seems worse.
bug:13211589
Change-Id: I08d56e618208781bf6b21a88663c2b8503a4f226
We need to specify "PBKDF2WithHmacSHA1And8bit" now in order to get precisely
the same output as was previously generated with "PBKDF2WithHmacSHA1". We
also now try both when it's ambiguous which was used to generate the archive
checksums.
Bug 12494407
Cherry-pick from master.
Change-Id: I2d6081dd62f50f7d493045150b327ed120de7abd
The ACTION_EXTERNAL_APPLICATIONS_UNAVAILABLE broadcast now uses the
EXTRA_REPLACING intent extra when it is sent as part of an upgrade operation
on a forward-locked application. Update PackageMonitor to recognize this
new information and express it appropriately to the observer.
Bug 11988313
Cherry-pick from master.
Change-Id: Iecea1876ffc918f23f9fa5845f1f89ed8d740dd5
When switching USB modes there are often spurious connect and disconnect events
that occur before reenumeration is complete. There is currently a 1000ms timer
to "debounce" the disconnect events. But with some USB accessories, this timeout
is not long enough, which results in an endless cycle of attempts to enter
USB accessory mode when the phone is connected.
To fix this, we now wait up to 10 seconds for the host to successfully configure
the device when entering USB accessory mode before giving up.
This is separate from the existing debounce timer, so the behavior of the
USB state change broadcasts are not affected.
Bug: 12877769
Change-Id: I7aa61f8a618546d749a7ddfc97bf103029a73d03
* commit '245b58d6f47740c09ebd47b75e6021c7cfb691af':
[ActivityManager]: Fix the activity visibility state not sync between ActivityManager and WindowManager
Changes in this patch include
[x] Long is used to store native pointers as they can
be 64-bit.
[x] Some minor changes have been done to conform with
standard JNI practice (e.g. use of jint instead of int
in JNI function prototypes)
[x] AssetAtlasManager is not completely 64-bit compatible
yet. Specifically mAtlasMap member has to be converted
to hold native pointer using long. Added a TODO to
AssetAtlasManager.java to indicate the change required.
Change-Id: I940433f601c6db998c1a8ffff338f5361200d5ed
Signed-off-by: Ashok Bhat <ashok.bhat@arm.com>
Signed-off-by: Craig Barber <craig.barber@arm.com>
Signed-off-by: Kévin PETIT <kevin.petit@arm.com>
Signed-off-by: Marcus Oakland <marcus.oakland@arm.com>
Symptom:
When press Home key to home screen, user is able to see the activity's window shown on top of wallpaper and below launcher(widgets).
Root Cause:
The ensureActivitiesVisibleLocked() is called pretty often (for example when a new process bound).
If the top activity "B" was finishing, then the previous activity "A" should be visible.
Therefore, the activity "A" window will be set to visible and then launched activity "A", but it does not updates the visible state in ActivityRecord for "A".
There has a timing issue that if a new activity "C" is started, "C" becomes the new top activity and be resumed.
In that case, Activity "A" window will remain visible even if it is behind a full screen activity "C" because the ActivityRecord.visble of "A" is still false, so the window visibility won't be update.
So when user press home key and back to launcher, the surface of activity "A" will be composed on top of wallpaper.
Solution:
Updates ActivityRecord.visible to true for "A". After "C" is started, the "A" will be called WindowManagerService.setAppVisibility() to set invisible, then called onStop() when execute ensureActivitiesVisibleLocked() again.
Change-Id: I536ba04b95d8d274fea6d679a6493e620bc981e2
Since Kitkat, an app pre-loaded under /system/priv-app/ has
FLAG_PRIVILEGED. However, if the app updated and the device
rebooted, privileged flag is unset from pkgFlags. This patch
fix issue to assign privileged flag when scanning the updated
packages.
Bug: 12640283
Change-Id: Ic24b5882f65dabdfae9cc39da3d68661bed4fc31
It is not possible to send a broadcast before the system
boot is completed. If you do it anyway you will get an
IllegalStateException: Cannot broadcast before boot completed.
If a memory card is inserted or removed while the phone is
booting up, there is a risk that the MountService will try to
broadcast a storage intent too early, and cause the device
to crash.
Use FLAG_RECEIVER_REGISTERED_ONLY_BEFORE_BOOT to avoid
problems with too early broadcasts.
Change-Id: Ied36a13d235df37c9788e45a35de40d919ae0cd0
Got a little too aggressive about cleaning up service state; need to
avoid removing services from an app until we are in the second loop
doing the final cleanup, otherwise we can leave services around with
restarting their process.
Also fix crash:
W/BinderNative( 667): Uncaught exception from death notification
W/BinderNative( 667): java.lang.ArrayIndexOutOfBoundsException: length=0; index=0
W/BinderNative( 667): at android.util.ArraySet.valueAt(ArraySet.java:301)
W/BinderNative( 667): at com.android.server.am.ActiveServices.killServicesLocked(ActiveServices.java:2069)
W/BinderNative( 667): at com.android.server.am.ActivityManagerService.cleanUpApplicationRecordLocked(ActivityManagerService.java:12412)
W/BinderNative( 667): at com.android.server.am.ActivityManagerService.handleAppDiedLocked(ActivityManagerService.java:3596)
W/BinderNative( 667): at com.android.server.am.ActivityManagerService.appDiedLocked(ActivityManagerService.java:3744)
W/BinderNative( 667): at com.android.server.am.ActivityManagerService$AppDeathRecipient.binderDied(ActivityManagerService.java:1024)
W/BinderNative( 667): at android.os.BinderProxy.sendDeathNotice(Binder.java:493)
W/BinderNative( 667): at dalvik.system.NativeStart.run(Native Method)
Issue detail:
Assume X, Y are non-fullscreen activities.
a.Home starts an activity X in task A in application stack.
b.X starts an activity Y in <task A> or <new task B>
c.Activity X will be invisible.
How to fix:
Because the function "isActivityOverHome" means an activity is able to see home.
But there may have many non-fullscreen activities between the top non-fullscreen activity and home.
If flag "behindFullscreen" is set, those middle activities will be invisible.
So it should only take care from who is adjacent to home.
Then check two flags frontOfTask(task root) and mOnTopOfHome for constraining the condition.
Change-Id: I60bcea304976414e44835a0a38675aae365e9e19
For storing pointers, long is used, as native pointers
can be 64-bit.
In addition, some minor changes have been done
to conform with standard JNI practice (e.g. use
of jint instead of int in JNI function prototypes)
Change-Id: Ib4435f0794740d545c1e640087849215e6844802
Signed-off-by: Ashok Bhat <ashok.bhat@arm.com>
Signed-off-by: Marcus Oakland <marcus.oakland@arm.com>
Code that expected a single top level element in an XML file
was doing something like :
while (type != START_TAG) { next(); }
This would loop forever when the XML being parsed was empty,
where each call to XmlPullParser.next() would return END_DOCUMENT.
bug: https://code.google.com/p/android/issues/detail?id=64173
Change-Id: I7543203e976a8999ae471a6c2d629249a87011bb
If there is input to be handled during finish activity we can get a
keydispatching timeout ANR. The reason is that finish activity is some
times not possible, and the activity is instead put on a finish queue.
The activity will then be finished sometime in the future. When we add
the activity to the finish queue, key dispatching is paused, and there
is an ANR timer waiting for it to be resumed again. Since it can take a
long time before the activity is actually finished, we need to resume
the key dispatching to avoid the ANR.
Change-Id: Icea4ab3b5ad05c8bfbadf8f5cece1a59ec621469
When unregistering MountService listeners, their Binder proxy
objects were compared to registered listeners instead of their
backing objects.
Change-Id: Ie98a686b1d17544f1eda59fb3eb0dc02d836c1b2
In ActivityTask.moveTaskToBackLocked NullPointerException may occur
when moving back with only current Activity in stack. This due to a
condition that may trigger despite a TaskRecord being null and then
attempt accessing the TaskRecord.mOnTopOfHome variable.
TaskRecord task may be set to null when no resumed activity remain.
Resolved by assuring that flag mOnTopOfHome is instead set to false
for current TaskRecord in case where there are no remaining activities
above home.
The above bug has already been corrected in the following commit,
ada62fca51d314cefe2c5da4e007df5b9abf320d, but it does not set the
cottect value to mTopOfHome for the current taks, see below.
Variable mOnTopOfHome will not be set to false in situations where
stack is of size 1 or less and task is null, perhaps from already
having finished current activity.
To avoid current TaskRecord maintaining value mOnTopOfHome to true
after launching Home this variable is set to false.
Impact should not be major due to correction earlier that makes sure
that there is always a TaskRecord.mOnTopOfHome set to true above Home
activity but if not correctly set for current task still gives a
possibility of bad behavior.
Change-Id: Ie86ad99c188aaa05b0de9d58eaa16c42b6fc4341
On devices without /dev/alarm, use a new backend based on timerfd.
timerfd has near-equivalent syscalls for the /dev/alarm ioctls we care
about, with two key differences:
1) /dev/alarm uses one fd for all clocks, while timerfd needs one fd per
clock type.
AlarmManagerService addresses this by replacing the fd (int) with an
opaque pointer (long) to the backend-specific state.
2) When the RTC changes, the /dev/alarm WAIT ioctl always returns, while
timerfd cancels (and signals events) only on specially-flagged RTC
timerfds.
The timerfd backend masks this by creating an extraneous RTC timerfd,
specifically so there's always something to signal on RTC changes.
Change-Id: I5aef867748298610347f6e1479dd8bf569495832
Signed-off-by: Greg Hackmann <ghackmann@google.com>
