Currently, TIMS has a logic for handling session crash (binderDied).
However, this can be racy if the client calls an operation right before it gets
ITvInputClient.onSessionReleased() callback. This change handles those request
gracefully without causing a crash in the client side.
Bug: 18612616
Change-Id: I37241e05d53f3cca693e0239fc9ad5dce02fc925
The code in place was inappropriately treating all recurring alarms
as non-wakeup for purposes of deferral. Worse, it was overriding the
"this deliverable batch of alarms includes a wakeup alarm" bookkeeping,
so could potentially cause inappropriate deferral of even standalone
wakeup alarms.
Bug 18591317
Change-Id: I2a62ed4badcaeb549c1ac4f086014aa829e45427
...not noon-or-midnight. Fix the initial fstrim delay to properly refer
to midnight rather than ambiguous 12-hour "zero" so that fstrim job
consideration always starts overnight rather than possibly at the following
day's noon, depending on when the device was booted.
Bug 18076397
Change-Id: Ife3cd5bdeb14c7832b6e2a2de88dcfd1ba731b67
In SQLite, if a sort order is not specified then the ordering is
undefined. In pre-L, SQLite would order accounts by the primary key.
But in L, the newer SQLite version appears to be ordering accounts by
the name.
Bug 18453759
Change-Id: I6bf2b0de59eca4c69472b4279b9e4194c3d3471e
Don't clear notification LEDs when seeing notifications on the
lockscreen.
Also fix a bug where the LED didn't continue flashing after
the screen turned off.
For devices with doze capability, ensure that the LED continuing
to flash after screen off doesn't cause an immediate pulses, but
delay the first pulse by 10s.
Bug: 15449039
Change-Id: Id34d51a2c91ceaf069e49add1ab690bb855f9638
Describe the currently installed splits, both in normal dumpsys
output and in checkin output. Also include revisionCode of those
splits when defined (non-zero).
Bug: 18576300
Change-Id: Ie8140961fb7b9e0ed23fd6bc267157aab075dd78
Currently, TvInputManagerService notifies the initial state of each
input via TvInputManagetCallback#onInputStateChanged after TvInputManager
is created. However, this is racy because the client may call methods
like getTvInputState() before the initialization.
This patch makes sure that the client gets the control when the initialization
finishes completely.
Bug: 18419452
Change-Id: I5d8141c20984013e68f2809120710c670557c9ad
- Remove 'oneway' from IHdmiVendorCommandListener.
- Add flush() method to HdmiCecController.
- Use IoThread for HdmiCecController.
Bug: 18495592
Change-Id: I497f7b49e94dd4402058ecc89cb5b7a3d58bf1e1
Currently, if a network does not specify DNS servers, we default
it to using 8.8.8.8. This was done because the emulator did not
specify DNS servers. However, it causes queries to fail slowly,
instead of failing fast, on networks that do not have
connectivity to 8.8.8.8.
Bug: 18327075
Change-Id: I0df13ff4a17ee65e640be96695a3af31b020963a
When an app is moved from "/system/priv-app" to another location
during OTA update, the privileged flag should be removed.
(cherry picked from commit 76bf60ead8132b86436ebbba40eaa8f2c8bbe812)
Change-Id: I39feeac7ece89c28045d196ae69fc974b1c6510b
The display setting saved to disk were using a localized name for
the key. This is an issue if the user changes languages after the
display settings have been saved. We now use the non-localized
name for the display to access the settings if it is available,
else we fall back on the localized name.
Bug: 18190800
Change-Id: I837c06a8935df10727229a1aa2bb6eeb3953707f
If AppWindowToken.allDrawn is changed from true to false an
additional layout pass is required to change WindowStateAnimator.
mDrawState from READ_TO_SHOW to HAS_DRAWN.
Fixes bug 18456175
Change-Id: Iddac657e5303a4154309889417374c0c6994c4df
Drop the minimums back down to their old values.
Revert what I think was a mistake in bumping up the last two
maximums to the same value as was being forced for 64 bit.
Smarten the 64 bit adjustment to be relative to the values picked,
rather than hard-coded.
Change-Id: Ibee9625073469ad4722a1b6684c9fb2b9f0a4681
The current heuristics depend on devices being alive at midnight+ in
order to run periodic background fstrim operations. This unfortunately
means that people who routinely turn their devices off overnight wind
up with their devices *never* running fstrim, and this causes major
performance and disk-life problems.
We now backstop this very-friendly schedule with an increasingly
aggressive one. If the device goes a defined time without a background
fstrim, we then force the fstrim at the next reboot. Once the
device hits the midnight+ idle fstrim request time, then we already
aggressively attempt to fstrim at the first available moment
thereafter, even if it's days/weeks later without a reboot.
'Available' here means charging + device idle. If the device never
becomes idle then we can't do much without rendering an in-use device
inoperable for some number of minutes -- but we have no evidence of
devices ever failing to run fstrim due to this usage pattern.
A new Settings.Global element (type 'long', called
"fstrim_mandatory_interval") is the source of the backstop time. If
this element is zero or negative, no mandatory boot-time fstrim will
ever be performed. If the element is not supplied on a given device,
the default backstop is 3 days.
Adds a new string to display in the upgrading dialog when doing
the fstrim. Note it is too late for this to be localized, but since
this operation can take a long time it is probably better to have
it show *something* even if not localized, rather than just sit there.
Bug 18486922
Change-Id: I5b265ca0a65570fb8931251aa1ac37b530635a2c
Stabilize mapping between ringer-mode=silent and zen=priority
by keeping track of two ringer modes:
- Internal ringer mode: Used for underlying stream muting
- External ringer mode: Reported to clients
The mapping between external ringer mode + zen is:
- normal = all
- vibrate = all
- silent = priority (read-write) or none (read)
Changes include:
- Remove "zen check" from audio service, back to audio
service having no knowledge of zen.
- Maintain a new external ringer mode in audio service,
this is the ringer mode reported through AudioManager
to callers, also mapped to the change intent.
- Introduce a "ringer mode delegate" to the local
audio manager interface, responsible for observing
external / internal mode changes, and making changes
if necessary.
- Internal ringer mode changes are still interesting
to the volume dialog, wire up a callback through
the existing IVolumeController interface.
- On devices without vibration, the mapping is the same
but since no ringer mode change is possible, disable
the icon toggle and remove the mute icon when volume=0.
- On devices with vibration, volume down presses should
pulse the vibrate icon (and vibrate) as a hint that this
is as low as the device can go using the keys. Since
the mechanics are similar to the existing zen=none hint,
pull into shared helper.
- Log ringer mode changes to the zen log, include calling
package information for issue diagnosis.
- Include whether vibration is supported in the audio service
dump.
- Update the status bar icon policy to use the internal ringer
mode, not the external mode (for vibrate icon).
- Update the "Muted by <x>" logic, include current suppressor
in dumpsys, ensure suppression icon is enabled & !clickable,
regardless of zen mode.
Bug: 17884168
Bug: 15471679
Bug: 16824970
Change-Id: Ia7d3bb23ce6d1e37b24fb6521d1c1ab9bb8f60c0
Allows ManagedProvisioning to determine whether there's a
challenge and thus whether to disable NFC provisioning.
Other implementation option: new hidden boolean API method.
Can't think of benefit of new API method "isBlockInUse", other
than doesn't leak PDB size and is more explicitly tied to the
use case. Open to either impl if anyone has opinions on the matter.
Bug: 18508767
Change-Id: I28d2eb5a0837ff85cb91f140b17ce1dd843fe9d6
A recent change sets the active path ahead of calling
updateActiveInput. Removes the check between new and active
path as it is always successful thus stops the flow.
Bug: 18506537
Change-Id: I29471ffc6194baa1fad62063f1d192caa9000afd
Fix permissions on packages.list and package-usage.list to only
allow read access from the package_info GID.
Bug: 18473765
Change-Id: I9b9ef13f4a00a8355619bbcdacc836f9abfa0376
