...are killed over eagerly.
When the current foreground activity is moving to the background,
it was briefly going through the CACHED_ACTIVITY state before the
correct LAST_ACTIVITY state, allowing its bound service processes
to be killed (because they went in to the cached list). To solve
this, as long as a process has stopping activities, it won't go
lower than LAST_ACTIVITY.
Also fixed a problem where we could put a process in CACHED_EMPTY
instead of CACHED_ACTIVITY_CLIENT. There were a number of cases
in the binding flow and also the client process state transitions
where we would not correctly updateing the bound client activity
state.
And add some sanity code so that if a process hosting a
service is killed, and a client process of that service is in the
cached state, we kill the client process. This avoids situations
where we can start thrashing around in the cached list because we
are restarting process for no reason -- since they will just
continue to be cached.
Finally, tune the process LRU list to allow twice as many cached
activity processes (from 8 to 16), so we can make better use of
the RAM we have available these days.
Change-Id: Ib0cdf78c321cbb035259fc9dd6ee27b5ba1f90c5
Found a regression in volume handling. Previously we handled
volume commands as long as the media stream was active but we were only
handling them when there was an active session on L. This adds a check to
make sure we handle volume if anything is playing on the media stream.
bug:17498479
Change-Id: Iddd745c8a762cf7ebedb37f1b26fc934db01fba0
ActionBarContainer was setting the bounds of its background assuming the
visibility of the ActionBarView. But that view becomes GONE when the
ActionBarContextView is visible, causing artifacts such as wrong shadows
when resized (as in custom configuration changes).
Issue #17280341 Quantum: drop shadow on CAB has wrong width after rotation on L, when configuration change is handled by the app
Change-Id: I07e57f00e27b41d5370cb9440b35734a8ec10f3a
- Add an explicit power manager call to set the low power mode state,
instead of trying manage everything around a single setting.
- When low-power mode is triggered by falling below the configured
threshold, it does not update the setting.
- The "is-enabled" api returns setting || below configured trigger.
- Move the snooze management into the new api call.
- Callers (sysui + settings) updated to use the api instead of the
setting.
- Handles the case where the level does an unpowered leap out of the
low battery level. (Possible if powered in-between while the device
is off)
Bug:17460535
Change-Id: Ic030504c9cad9868a7137abbe837b170da37852b
The test is sending too much data to be signed, which should actually
fail, and does on Volantis. Apparently the other keymaster implementors
do something to pass it, because shamu and hammerhead pass, but the test
is wrong.
Change-Id: Ic616a551567d64f5d87d9607ceb08afa7be74f9d
* Add TelecommManager.getCallState (hidden API)
* Make TelephonyManager.getCallState call through to
TelecommManager, to be consistent with
TelephonyManager.ACTION_PHONE_STATE_CHANGED broadcasts for
overall call state. Telephony continues to manage call states for
individual subscriptions.
Bug: 17378767
Change-Id: Ia5e8b21df801ed3af4f6e14c110a72c92f077f88
Sometimes the pipe has been closed when it's thread tries to access
E AndroidRuntime: *** FATAL EXCEPTION IN SYSTEM PROCESS: TransferPipe
E AndroidRuntime: java.lang.NullPointerException: Attempt to invoke virtual method 'java.io.FileDescriptor android.os.ParcelFileDescriptor.getFileDescriptor()' on a null object reference
E AndroidRuntime: at com.android.internal.os.TransferPipe.run(TransferPipe.java:184)
E AndroidRuntime: at java.lang.Thread.run(Thread.java:818)
Change-Id: I0fcd4a3334b49972903f2cb0edb51323ba3f49e5
- Delay showing the bouncer and playing the entrance animation for a
couple of frames.
- Do not disable back button on the normal Keyguard. This makes the
entrance animation nicer and fixes some jank due to the need to
draw into both windows.
- Prevent setPadding(...) call when nothing changes. setPadding would
invalidate the padding for the whole view hierarchy, which results
in a slower measure() when setting the window to invisible.
Bug: 17419960
Change-Id: I4a239d4af40ad86875e4a0dd08473f19a5c9b961
To implement the new gel-cap shaped ripple I resurrected the
onDraw and setPressed methods from the KitKat implementation.
The KitKat animation timings were adjusted to match the material
ripple, but the structure of the animators is the same as KitKat.
Since the new ripple is drawn directly to the canvas, the references
to the KitKat background image were removed.
The LogInterpolator is copied from the framework Ripple
to match the material animation curves.
Bug: 17112935
Change-Id: If6a3eb92de794b526338166bf8cb096eb9764cf6
Previously the system tried to enable at least one auxiliary IME
even when the system is not ready. However, this doesn't make
much sense because the user should be able to set up their phone
without auxiliary IMEs. Also, IMEs enabled before the system
becomes ready are kept to be enabled after the system becomes
ready. Thus, we should minimize the number of enabled IMEs
until the system becomes ready.
BUG: 17347871
Change-Id: Ife93d909fb8a24471c425c903e2b7048826e17a3
Eliminates several field and method accesses by making the TypedArray
pool local to a single Resources object. Removes an unnecessary
synchronization.
ReadXmlAttrs averaged 0.069 ms/op before, 0.064 ms/op after.
BUG: 17484798
Change-Id: If790a5ba6596b47a04f117c8912974798a592052
500 msec is apparently not enough time to push the pixels around on
a Volantis (or Manta, or occasionally Deb). Increasing the timeout
eliminates turning the screen on before the surface is completely
drawn.
Optimizing the drawing path so that we can return the timeout to
500ms has been filed as b/17496306.
Fixes bug 16849724.
Change-Id: Ic0fca68bc41caa67dba973b5c40915756dc4730f
If a display is removed right after it is added we will get null
when trying to retrieve it from the DisplayManager. Check for that
null before commiting to using that display.
Fixes bug 17478906.
Change-Id: I89ae8cc7387729d678b9b1ed5b1797a93cdde3f9
Phase2 isn't required for EAP_TLS networks, and it is possible
for a developer to miss it. We are requiring it for internal
book keeping - so this change just sets Phase2 to 'None' when
EAP_TLS is set on the configuration.
Bug: 17043082
Change-Id: I5a8e0a3a236d0dfd1295584de55d5b9a1b76b483
- Changing package from android.telecomm to android.telecom
- Changing package from com.android.telecomm to
com.android.server.telecomm.
- Renaming TelecommManager to TelecomManager.
Bug: 17364651
Change-Id: I192cb5d189f55db012ea72ee82ccc5aedbc21638
ActivityManager still thinks the device is going to sleep, so
any Activity started while the lockscreen is showing is immediately
stopped. When Keyguard calls ActivityManager.keyguardWaitingForActivityDraw(),
then we must make sure that the ActivityManager thinks we are not sleeping.
Bug:17459745
Change-Id: I5c45c88e3a72e1f08e1b32101d0d0b4675f7a5ff
A recent bug fix exposed another one where we were not updating
the internal state of the remote print document after it finishes
updating. This resulted in a crash on every print.
bug:16966145
Change-Id: I398ff7976533241e3d4cb6cd27f69cdc25e67be9
- Added the prefix 'persist.sys.' to pass selinux and to make the
properties persistent after reboot.
- Shortened the name to fit the length to 31.
- Got together the properties in the near place.
Bug: 17491732
Change-Id: I051f1bacc51ee372806077159020600ffeb30f48
