Add the possibility for the effect framework to suspend
(temporarily disable process) and restore audio effects.
This feature will be usefull to disable pre processing under certain
conditions and better control coexistence of audio effects
on output mix and specific sources.
Change-Id: I79b195982cc48748d5708308fb1647b9c3c34cc6
If a pre processing effect is detroyed while enabled and capture is active,
there was a possibility that the effect engine is released by the framework
while still processed by the audio HAL.
The fix consists in not releasing the engine in EffectModule::removeHandle()
but just flag the effect as being detroyed to avoid further calls to functions
on the engine effect interface.
The effect interface is then removed from the audio HAL safely in
EffectChain::removeEffect_l() while holding the EffectChain mutex.
Change-Id: I71fab30d9145062af8644f545a1f1d4d3e7e7f02
The problem is that the audio HAL fails to acquire the wake lock when playing the notification.
This is because of a change that removed the mediaserver process form the system group for honeycomb.
The fix consists in requesting the wake lock from PowerManagerService when AudioFlinger mixer
wakes up.
A consequence of this change is that audio HALs or pcm drivers do not have to hold wake locks
anymore as in the past.
Change-Id: I4fb3cc84816c9c408ab7fec75886baf801e1ecb5
Dump of media.audio_flinger service was only listing effects on output threads.
Moved the dump of effect chains from PlaybackThread to ThreadBase class so that
pre processings on RecordThread are also listed.
Change-Id: If8bc74023c12b9c2371f1b300743b156ceca7b87
Audio effect framework is extended to suport effects on
output and input audio path.
AudioFlinger: Support for audio effects and effect chains is
moved from PlaybackThread class to ThreadBase class so that
RecordThread can manage effects.
Effects of type pre processing are allowed on record thread
only. When a pre processing is enabled, the effect interface handle is
passed down to the input stream so that the audio HAL can call the
process function. The record thread loop calls the effect chain process
function that will only manage the effect state and commands and skip the
process function.
AudioRecord: The audio session is allocated before calling getInput() into
audio policy serice so that the session is known before the input theead is
created and pre processings can be created on the correct session.
AudioPolicyService: default pre processing for a given input source are
loaded from audio_effects.conf file.
When an input is created, corresponding effects are created and enabled.
Change-Id: Id17119e0979b4dcf189b5c7957fec30dc3478790
Record and playback objects (resp AudioRecord and AudioTrack)
are created using a channel mask, but this information is lost
in the mixer because only the channel count is known to
AudioFlinger. A channel count can always be derived from a
channel mask.
The change consists in:
- disambiguiting variable names for channel masks and counts
- passing the mask information from the client to AudioFlinger
and the mixer.
- when using the DIRECT ouput, only verifying the format of
the track is compatible with the output's for PCM.
Change-Id: I50d87bfb7d7afcabdf5f12d4ab75ef3a54132c0e
Moved and renamed media/EffectApi.h to hardware/audio_effect.h
Modified the effect library API to expose a library info structure
containing an interface functions table.
Also removed enums for audio channels, audio format and devices
from effect API and use values from system/audio.h instead.
Modified effects factory to support new library interface format and
load libraries and efffects listed in audio_effects.conf file.
The file audio_effects.conf is first loaded from /vendor/etc and
then from /system/etc/audio_effects.conf if not found.
Modified existing effect libraries to implement the new library interface.
Change-Id: Ie52351e071b6d352fa2fbc06c3846686f8c45df9
Fix two issues in audio effect framework reported by partners.
1 - Fixed duplicated audio buffer sent to effect process function when
pausing a track.
Modified Effectchain::process_l() function to clear the effect chain
input buffer before calling the effect process functions when no track
is active on the session. Previous code was clearing the buffer after
calling the process functions and when transitioning from active
to inactive, the last processed buffer was passed again once to effect
process function before being cleared.
2 - Fixed potential mutex cross deadlock when disconnecting an effect
while playback is active. This is because EffectChain::process_l()
was calling PlaybackThread::hasAudioSession() thus creating an inversion
in the mutex lock order (EffectChain mutex locked before ThreadBase mutex).
The fix consists in removing the call to hasAudioSession() from process_l()
and requires each effect chain to keep count of the number of audio tracks
attached to it (previously only the active tracks were accounted for).
Change-Id: Iee4246694ea8c7a66c012120c629d72dd38f9c35
Keep track of the primary interface that handles the master volume,
etc.
Change-Id: Ib0701fccff8d8783a99035a241ab7c8ec75c00ac
Signed-off-by: Dima Zavin <dima@android.com>
Modified default volume control logic in AudioService:
1 IN_CALL volume if in video/audio chat
2 NOTIFICATION if notification is playing or was playing less than 5s ago.
3 MUSIC
Modified silent mode:
- now also affect MUSIC stream type
- entering silent mode when VOL- hard key is pressed once while selected
stream volume is already at 0 (except for VOICE_CALL stream).
- exiting silent mode when pressing VOL+ hard key while in silent mode
Play sound FX (audible selections, keyboard clicks) at a fixed volume.
Modified audio framework:
- isStreamActive() method now implemented in AudioPolicyManagerBase (previously AudioFlinger)
- iStreamActive() now specifies a time window during which the stream is considered
active after it actually stopped.
Change-Id: I7e5a0724099450b9fc90825224180ac97322785f
Use a Mutex wherever atomic operations were used in AudioTrack,
AudioRecord, AudioFlinger and AudioEffect classes.
Change-Id: I6f55b2cabdcd93d64ef19446735b8f33720f8dbc
- Fixed click when re-enabling effect during the turn off phase:
make sure the effect states where effect is processed are the same
where volume control is delegated to effect.
- Fixed click when effect is deleted while still active: do not apply
volume ramp if an effect having volume control was just removed from the
effect chain.
Also fixed a crash when PCM dump is enabled in effect bundle wrapper.
Change-Id: Ib562f5cf75c69af75df0e862536262e2514493e4
Fixed regression introduced by change a54d7d3d7dd691334189aab20d23c65710092869 in audioflinger mixer thread:
When the output stream is suspended, the sleep time between two writes must match the actual duration
of one output stream buffer otherwise the playback rate is not respected.
Change-Id: Ic5bebe890290d1f44aeff9dd3c142d18e26fff2a
This is necessary to allow creating and enabling an effect attached to a particular player
session before the playback is started. As a matter of fact, the implementation of the mediaplayer
does not create the AudioTrack before playback starts.
Change-Id: I1266e8885f9d756acc949303321aaac0fbf83e34
The type of the cmd, cmdSize and *pReplySize parameters of the effect control interface command()
function have been modified from int to uint32_t. This is more consistent with their role.
Change-Id: I84d289fc262d6753747910f06f485597dfee6591
Added methods for audio effects management by audio policy manager.
- control of total CPU load and memory used by effect engines
- selection of output stream for global effects
- added audio session id in parameter list for startOutput() and stopOutput().
this is not used in default audio policy manager implementation.
Modifications of audio effect framework in AudioFlinger to allow moving and reconfiguring
effect engines from one output mixer thread to another when audio tracks in the same session
are moved or when requested by audio policy manager.
Also fixed mutex deadlock problem with effect chains locks.
Change-Id: Ida43484b06e9b890d6b9e53c13958d042720ebdb
Fixed the following problems in audio effect volume control in AudioFlinger:
- Make sure that the volumes returned by EffectChain::setVolume_l() are correct even is
no change is detected since last call
- Do not use isEnabled() to validate volume control but mState >= ACTIVE instead as the volume control
must be also active in STOPPING and STOPPED states.
Change-Id: Id62da3164fad500ee8a5efd6cd78c77e8fdcb541
- Fixed crash when deleting an effect chained before an effect having volume control
- Changed EFFECT_FLAG_VOLUME_CTRL to implicitely include EFFECT_FLAG_VOLUME_IND
(not need to set both in effect descriptor).
- Volume control changes from one effect to another if needed according to effect enable state
- EFFECT_CMD_SET_VOLUME is only sent when their is an actual change in volume
Change-Id: Ieebaf09157e2627366023569d95516646e03e26c
moved surfaceflinger, audioflinger, cameraservice
all native services should now reside in this location.
Change-Id: Iee42b83dd2a94c3bf5107ab0895fe2dfcd5337a8
