Merge commit 'cbf77e9bef0db68c55b60994d93674bf6fd1ca13' into eclair-mr2
* commit 'cbf77e9bef0db68c55b60994d93674bf6fd1ca13':
Another fix for #2186897: Cannot unlock the device by swiping
Merge commit 'b10e2f1a861933f50d9ad8ea24b5dfa5643a2c11' into eclair-mr2
* commit 'b10e2f1a861933f50d9ad8ea24b5dfa5643a2c11':
Fix issue #2186709: Can't unlock the device for a while
queue of data chunks (sort of a blob-oriented logcat).
In the future, this will be coupled with a revised checkin service that
would actually upload this data.
Merge commit '2a21a77d5cf481b129a7cb4e3e00424e4d300e6d' into eclair-mr2
* commit '2a21a77d5cf481b129a7cb4e3e00424e4d300e6d':
Work on issue #2144454: Inconsistent swipes...
This introduces some hacks in the framework to try to clean up the
data we are getting from the touch screen. There are two main things
being done here:
1. Look for changes in position that are unreasonably large, and
ignore them. This is intended to eliminate the spurious jumps that
often happen when releasing.
2. Add some simple adaptive averaging of the touch data. If the
difference between the last and next point is large enough, we
disable the averaging; otherwise we average up to the last 5 points.
The goal is to get rid of the noise of small movements so that things
like taps don't look like short flings, while still responding quickly
to rapid movement.
For averaging pressure, we also weight each averaged coordinate by
the reported pressure at that point. This is intended to keep the
coordinates closer together during a release, when the pressure is
going down and the accuracy decreasing. It may also result in some
other interesting artifacts, but hopefully nothing problematic.
Change-Id: I1369e9ab015c406946a45c2d72547da9c604178f
Merge commit '16cb04ab1cd88d917fdd34a9063fe4a9707aa5b1' into eclair-mr2
* commit '16cb04ab1cd88d917fdd34a9063fe4a9707aa5b1':
Add a little logging to diagnose wifi cycle bug
+ push the double-quote handling down to framework.
wpa_supplicant keeps the ssid in a quoted string in the config file. However,
the UI currently needs to handle the quoted string which makes it difficult
to handle the SSID containing the quotes. The change will move the
supplicant-specific double-quote handling from UI to framework, i.e. to
add/remove doubel-quotes in framework instead of in UI settings.
Merge commit 'f836acf241f10d943d72d439fa425fda73a6d56b' into eclair-mr2
* commit 'f836acf241f10d943d72d439fa425fda73a6d56b':
Fix issue #2179931: Power key to wake up frequently ignored when in dock app
TokenWatcher.acquire() synchronizes on mTokens, not this,
so we need to synchronize on mKeyguardDisabled in disableKeyguard()
to synchronize properly with reenableKeyguard().
This should fix b/2180142 (Stuck in enable keyguard when receiving phone call)
Change-Id: Iad66a2748c7fbf2c516fdb8a00988696719ea80c
Signed-off-by: Mike Lockwood <lockwood@android.com>
The dock app is forcing the screen to a particular brightness level. This
causes the window manager to often call into the power manager with the
new brightness. This causes us to go in to updateLightsLocked() to figure
out and apply the real brightness to use. When the screen is off the
real brightness always remains 0, but even if it didn't change from the
last one we would start an animation which would when done put the system
to sleep and fight with the user trying to turn the device on.
Now, if the new target brightness is the same as the last one, we leave the
animation as-is -- either running or not as appropriate.
Change-Id: I067d55ea2b39e294c5d5291587a4d8727c0b8083
Merge commit '98e0b146b80670b52805b4b210ef5582dad6bb68' into eclair-mr2
* commit '98e0b146b80670b52805b4b210ef5582dad6bb68':
Make PhoneStateListeners not call TelephonyManager
Since the StatusBarPolicy is run in the System Process and shouldn't therefore call into
the Telephony process we decided to make sure all the needed info was passed along with the
original notifications.
bug: 2173053
Merge commit '2c6c5e6e49795e6e24cd089c9018377d837ba931' into eclair-mr2
* commit '2c6c5e6e49795e6e24cd089c9018377d837ba931':
Fix issue #2176944: Need API so browser, others can determine memory size of device
Merge commit '348b92bd513087369ac682e29620d7829fa1381b' into eclair-mr2
* commit '348b92bd513087369ac682e29620d7829fa1381b':
GPS: Fix problem with SUPL when SUPL APN is already active.
Merge commit '33e21fcc99dd91061ea245984c4e9a1544cb943f' into eclair-mr2
* commit '33e21fcc99dd91061ea245984c4e9a1544cb943f':
Control H icon display in Status bar.
- Don't crash if the service's app process doesn't have a thread (this
can happen if we are currently starting the process and then try to
start the service again).
- Be more robust about deciding to start a service's process: try each
time it is started; the startProcess call will take care of ignoring
it if the process is already started.
- Fix some issues where we would leave dead processes on the low memory
list.
Change-Id: I490e01ba7b45adc191bab7ace377b6873e284897
Use ConnectivityManager.CONNECTIVITY_ACTION broadcast in LocationManagerService
to notify GPS when SUPL connection is ready instead of TelephonyIntents.ACTION_ANY_DATA_CONNECTION_STATE_CHANGED,
which is not sent in all cases.
Expand LocationProvider.updateNetworkState() to include NetworkInfo object.
Fixes bug b/2155661
Change-Id: Iee227ace7d536b36cf7973e3e6a8b7a621ce6565
Signed-off-by: Mike Lockwood <lockwood@android.com>
In LocationManagerService if a LocationListener is removed while it has
a pending broadcast the wake lock held while pending broadcasts are
outstanding do not get cleared properly.
There are 2 cases of this race that are fixed:
1. locationCallbackFinished was changed to check the mReceivers HashMap
directly instead of calling getReceiver. getReceiver would add the
ILocationListener as a new Receiver if it did not exist which caused
a receiver that was removed when it still had a broadcast pending to
be added back in a bad state when the pending broadcast completed.
2. removeUpdatesLocked was changed to decrement the pending broadcasts
when a Receiver is removed that has pending broadcasts.
Fixes bug b/2163871
Change-Id: I50a321c9b3359bf69845236dc4a4b9e38e847335
Signed-off-by: Mike Lockwood <lockwood@android.com>
Merge commit 'b134b2038ecabcbec3f9b657834d45de27707068' into eclair-mr2
* commit 'b134b2038ecabcbec3f9b657834d45de27707068':
More fix#2163209: alarm clock rings but is hidden behind lock screen
There was another way we could ignore the application windows flags
while the lock screen was displayed. This is the infrastructure to
deal with that.
Change-Id: Id8c9cb2f7081df6757ccb797a7cde618e82f7b38
Merge commit '9af53ea6ef9a986bc65bcd11deb7994f1f4ba8ec' into eclair-mr2
* commit '9af53ea6ef9a986bc65bcd11deb7994f1f4ba8ec':
when logging free space on /data, log /system and /cache as well
Merge commit '3161795b2353171bb0636fb3ea6dab7dec80a4f4' into eclair
* commit '3161795b2353171bb0636fb3ea6dab7dec80a4f4':
when logging free space on /data, log /system and /cache as well
Merge commit '568cae571a3d74d1992176a21722e07b44e9a3c4' into eclair-mr2
* commit '568cae571a3d74d1992176a21722e07b44e9a3c4':
Fix issue #2171460: Turn off background blurring of power dialog
This is the main entry point to the Bluetooth APIs, and returns the default
local Bluetooth adapter.
It replaces context.getSystemService(Context.BLUETOOTH_SERVICE). This was
never in a public SDK release.
DrNo: eastham
Bug: 2158765
Joke: Why can't you play cards in the jungle? Because there's too many cheetas!
Change-Id: Ieed8be009ee5aba621cb69090ee8c8a9c19c840d
Don't hold a lock when the activity thread is telling the activity manager
to release a provider.
This requires that the activity manager now keep a reference count on the
providers, because without the lock it is possible for activity thread to
call in to request the provider again before it has finished telling
about the release.
Change-Id: I5f912903891f4edae85e28819d4e6f14b8f2e688
Tell the broadcast receiver whether it is getting an initial sticky value,
so it will be quiet about attempts to do ordered broadcast stuff.
Note that the original bug being reported was not actually a crash, just
an error log. So all we are doing here is making the log quieter.
Change-Id: Iaf1b718d82093ec1197142410a64feff47eb3859
There was a bug with the starting window where it could be added to
the app window list twice, so the buddy list would end up with one
left over after all was done. This would result in visibility
changes not being delivered to it correctly, delaying the dispatch
of onStop.
Change-Id: If1993eaf9cfbba1f523ce5aaa478be0239d0c7db
We now just don't send out dock broadcasts/launches when the
device is not provisioned. Good enough for our purposes.
Change-Id: Iee6384121675e0e9854745ec1168245e8a23a241
Windows with a negative Y position can end up in createSurfaceLocked()
with mFrame containing a negative height, causing SurfaceFlinger to go
crazy when asked to create the surface. This change simply guards
against such a situation by instead asking for a 1x1 surface and relying
or later layout operations to resize the window to the appropriate size.
Change-Id: I66f2058f4cd1cf069b12d3d23e6fd340dc76b74e
