This change enables the joystick input mapper to handle any axes
that are not claimed by the touch input mapper, which makes
auxiliary controls such as wheels / knobs accessible.
Change-Id: I01ee7f342ac91acfcb4ccb6676fd52b3d5bf31a0
Bug: 5205301
Some drivers report one finger as BTN_TOOL_FINGER, two as
BTN_TOOL_DOUBLETAP, three as BTN_TOOL_TRIPLETAP and four
as BTN_TOOL_QUADTAP. Since we care about the tool type,
we need to handle _DOUBLE/_TRIPLE/_QUAD tap in the same way
we handle _FINGER.
Change-Id: I8eb83d2a2bada9ac32d07619c7eea84e924316b8
Bug: 5049148
Finished stylus support, including support for indirect stylus
and mouse tools.
Added TILT axis. When stylus tilt X/Y is available, it is transformed
into an orientation and tilt inclination which is a more convenient
representation and a simpler extension to the exiting API.
Touch devices now only report touch data using a single input
source. Previously touch devices in pointer mode would report
both absolute touch pad data and cooked pointer gestures.
Now we just pick one. The touch device switches modes as needed
when the focused application enables/disables pointer gestures.
This change greatly simplifies the code and reduces the load
on the input dispatcher.
Fixed an incorrect assumption that the value of ABS_(MT_)DISTANCE
would be zero whenever the stylus was in direct contact. It appears
that the correct way to determine whether the stylus is in direct
contact (rather than hovering) is by checking for a non-zero
reported pressure.
Added code to read the initial state of tool buttons and axis values
when the input devices are initialized or reset. This fixes
problems where the input mapper state might have the wrong initial
state.
Moved responsibility for cancelling pending inputs (keys down,
touches, etc.) to the InputDispatcher by sending it a device reset
notification. This frees the InputReader from having to synthesize
events during reset, which was cumbersome and somewhat brittle
to begin with.
Consolidated more of the common accumulator logic from
SingleTouchInputMapper and MultiTouchInputMapper into
TouchInputMapper.
Improved the PointerLocation output.
Change-Id: I595d3647f7fd7cb1e3eff8b3c76b85043b5fe2f0
Bug: 5064702
This change improves compatibility with standard touch device
drivers. All existing touch device IDC files will need to
be updated because the input system now assumes that the
touch device drivers implement the multitouch input
protocol correctly and use the appropriate axes.
Change-Id: I93aad0e011efea74fbc7fa3da31f7967aff8136c
Bug: 5064702
Introduced the concept of an InputListener to further decouple
the InputReader from the InputDispatcher. The InputListener
exposes just the minimum interface that the InputReader needs
to communicate with the outside world. The InputReader
passes arguments to the InputListener by reference, which makes
it easy to queue them up.
Consolidated all of the InputReader locks into one simple global
Mutex. The reason this wasn't done before was due to potential
re-entrance in outbound calls to the InputDispatcher. To fix this,
the InputReader now queues up all of the events it wants to send
using a QueuedInputListener, then flushes them outside of the
critical section after all of the event processing is finished.
Removing all of the InputMapper locks greatly simplifies the
implementation.
Added tests for new stylus features such as buttons, tool types,
and hovering.
Added some helpers to BitSet32 to handle common code patterns
like finding the first marked bit and clearing it.
Fixed a bug in VelocityTracker where the wrong pointer trace
could get cleared when handling ACTION_POINTER_DOWN. Oops.
Changed PointerCoords so it no longer stores useless zero
axis values. Removed editAxisValue because it is not very
useful when all zero value axes are absent and therefore
cannot be edited in place.
Added dispatch of stylus hover events.
Added support for distance and tool types.
Change-Id: I4cf14d134fcb1db7d10be5f2af7b37deef8f8468
We should use all-makefiles-under instead.
all-subdir-makefiles can be used only before any "include" statement.
Before this change, both subdirs were actually not included.
Change-Id: I6bf35d07f294a5012c9322096f999ac26e37432f
The input reader needs this information so that it knows how to
interpolate touches on an external touch screen.
Changed Display so that it asks the WindowManager what the real
display size is (as opposed to the raw display size). This means
it now takes into the forced display size set by
adb shell am display-size.
Replaced all calls to getRealWidth() / getRealHeight() /
getRealMetrics() in the WindowManager and replaced them with direct
usages of the mCurDisplayWidth / mCurDisplayHeight so that the WM
doesn't end up making a reentrant Binder call into itself.
Fixed the table status bar HeightReceiver so that it updates the
height on all configuration changes since it is possible that the
display size changed independently of an external HDMI display
being plugged / unplugged.
Improved the Display class documentation to make the distinctions
betweeen the various sizes clearer.
Change-Id: I3f75de559d3ebffed532ab46c4ae52c5e7f1da2b
Added TOOL_TYPE_ERASER.
Refactored the InputReader to share more code between the
various input mappers that handle button states and to
simplify the accumulator implementations by having each
one only handle a single type of input.
Removed the concept of direct/indirect tool types from the API.
If we add it back, it should be done in a manner that is orthogonal
to the tool type itself, perhaps as a flags field on the pointer.
The device source may well provide sufficient information anyhow.
Change-Id: I811c22d95e8304269b6ee4f6d11a6b04f3cfc1b2
This change moves the cached window and application input state
into the handle objects themselves. It simplifies the dispatcher
somewhat because it no longer needs to fix up references to
transient InputWindow objects each time the window list is updated.
This change will also make it easier to optimize setInputWindows
to avoid doing a lot of redundant data copying. In principle, only
the modified fields need to be updated. However, for now we
continue to update all fields in unison as before.
It turns out that the input dispatcher was inappropriately retaining
pointers to InputWindow objects within the mWindows InputWindow
vector. This vector is copy-on-write so it is possible and the
item pointers to change if an editing operation is performed on
the vector when it does not exclusively own the underlying
SharedBuffer. This bug was uncovered by a previous change that
replaced calls to clear() and appendVector() with a simple use
of operator= which caused the buffer to be shared. Consequently
after editItemAt was called (which it shouldn't have, actually)
the buffer was copied and the cached InputWindow pointers became
invalid. Oops. This change fixes the problem.
Change-Id: I0a259339a6015fcf9113dc4081a6875e047fd425
Modified the touch input mapper to assign pointer ids sequentially
starting from 0 instead of using the tracking id or slot index
supplied by the driver. Applications should not depend on this
ordering but some do. (sigh)
Bug: 4980884
Change-Id: I0dfeb3ac27c57a7102a13c960c760e2a02eb7669
This fixes a problem where touches can get stuck because the
driver and the framework have different ideas of what the
initial slot index is. The framework assumed it was slot 0
but it could in principle be any slot, such as slot 1. When
that happened, the framework would start tracking the first
touch as slot 0, but it might never receive an "up" for that slot.
Change-Id: Idaffc4534b275d66b9d4360987b28dc2d0f63218
Made it possible for individual windows to disable pointer gestures
while the window has focus using a private API.
Cleaned up the InputReader configuration code to enable in-place
reconfiguration of input devices without having to reopen them all.
This change makes changing the pointer speed somewhat nicer since the
pointer doesn't jump back to the origin after each change.
Change-Id: I9727419c2f4cb39e16acb4b15fd7fd84526b1239
Use epoll_wait() instead of poll().
Dropped all support for non-Linux platforms.
Added a wake-up protocol so that the InputReader can wake up
the event loop immediately as needed.
Change-Id: Ibf84337bcceb3c2df068c5c637de42a319786d66
Fix bug where the pointer presentation would be updated on
any input reader timeout rather than only when a pointer gesture
is in progress.
Bug: 4124987
Change-Id: Ie9bba4a0b3228d55e45e65fa2ede5cd6ba887a08
Fade the pointer spot when swiping or performing a freeform
gesture.
Support configuring the gesture mode in the device IDC file.
Added workaround for devices that report individual finger
movements one at a time instead of all at once.
Bug: 4124987
Change-Id: I44628b00382ad59306e4ec5c4717d69cc6fbebb8
Added a new PointerIcon API (hidden for now) for loading
pointer icons.
Fixed a starvation problem in the native Looper's sendMessage
implementation which caused new messages to be posted ahead
of old messages sent with sendMessageDelayed.
Redesigned the touch pad gestures to be defined in terms of
more fluid finger / spot movements. The objective is to reinforce
the natural mapping between fingers and spots which means there
must not be any discontinuities in spot motion relative to
the fingers.
Removed the SpotController stub and folded its responsibilities
into PointerController.
Change-Id: Ib647dbd7a57a7f30dd9c6e2c260df51d7bbdd18e
Refactored PointerController to extract the surface management
code to a new component called a SpriteController so that it can
be used to move finger tracking spots around the screen as well.
The SpriteController is designed to fully decouple the client from
any latency introduced by surface transactions and drawing.
All sprite updates are performed asynchronously on the Looper using
a copy of the sprite state.
Added a stub SpotController implementation for touch pad UX.
It will be implemented in a subsequent patch.
Fixed a little bug in pointer orientation changes when entering
DISPLAY_ORIENTATION_90 the x offset was clobbered.
Change-Id: I6d59d80df9af61e93af50290e7776337d10c9d5a
When 10 fingers are down, reduces the CPU time spent by the InputReader
thread from ~30% to ~5% on Stingray.
Change-Id: I42ee5c67b8521af715cbab43e763a4af4eb1f914
Added support for Linux multitouch protocol B (slots).
Added support for using the device's input properties as a hint
to determine the intended usage of a touch device.
Added support for the ABS_MT_DISTANCE axis.
Fixed a bug reporting the presence of the orientation axis.
Change-Id: Icf7b5a5a0f1a9cdf6ad2b35be8ea0c1a35815d48
Added a timeout mechanism to EventHub and InputReader so that
InputMappers can request timeouts to perform delayed processing of
input when needed.
Change-Id: I89c1171c9326c6e413042e3ee13aa9f7f1fc0454
1. Single finger tap performs a click.
2. Single finger movement moves the pointer (hovers).
3. Button press plus movement performs click or drag.
While dragging, the pointer follows the finger that is moving
fastest. This is important if there are additional fingers
down on the touch pad for the purpose of applying force
to an integrated button underneath.
4. Two fingers near each other moving in the same direction
are coalesced as a swipe gesture under the pointer.
5. Two or more fingers moving in arbitrary directions are
transformed into touches in the vicinity of the pointer.
This makes scale/zoom and rotate gestures possible.
Added a native VelocityTracker implementation to enable intelligent
switching of the active pointer during drags.
Change-Id: I7b7ddacc724fb1306e1590dbaebb740d3130d7cd
Added the concept of pointer properties in a MotionEvent.
This is currently used to track the pointer tool type to enable
applications to distinguish finger touches from a stylus.
Button states are also reported to application as part of touch events.
There are no new actions for detecting changes in button states.
The application should instead query the button state from the
MotionEvent and take appropriate action as needed.
A good time to check the button state is on ACTION_DOWN.
As a side-effect, applications that do not support multiple buttons
will treat primary, secondary and tertiary buttons identically
for all touch events.
The back button on the mouse is mapped to KEYCODE_BACK
and the forward button is mapped to KEYCODE_FORWARD.
Added basic plumbing for the secondary mouse button to invoke
the context menu, particularly in lists.
Added clamp and split methods on MotionEvent to take care of
common filtering operations so we don't have them scattered
in multiple places across the framework.
Bug: 4260011
Change-Id: Ie992b4d4e00c8f2e76b961da0a902145b27f6d83
Added a new PointerIcon API (hidden for now) for loading
pointer icons.
Fixed a starvation problem in the native Looper's sendMessage
implementation which caused new messages to be posted ahead
of old messages sent with sendMessageDelayed.
Redesigned the touch pad gestures to be defined in terms of
more fluid finger / spot movements. The objective is to reinforce
the natural mapping between fingers and spots which means there
must not be any discontinuities in spot motion relative to
the fingers.
Removed the SpotController stub and folded its responsibilities
into PointerController.
Change-Id: I5126b1e69d95252fda7f2a684c9287e239a57163
Refactored PointerController to extract the surface management
code to a new component called a SpriteController so that it can
be used to move finger tracking spots around the screen as well.
The SpriteController is designed to fully decouple the client from
any latency introduced by surface transactions and drawing.
All sprite updates are performed asynchronously on the Looper using
a copy of the sprite state.
Added a stub SpotController implementation for touch pad UX.
It will be implemented in a subsequent patch.
Fixed a little bug in pointer orientation changes when entering
DISPLAY_ORIENTATION_90 the x offset was clobbered.
Change-Id: Ib25d162d577c9b354cb74d5d761c3c9f9f438d42
This patch adds a mechanism for capturing, filtering, transforming
and injecting input events at a very low level before the input
dispatcher attempts to deliver them to applications. At this time,
the mechanism is only intended to be used by the accessibility
system to implement built-in system-level accessibility affordances.
The accessibility input filter is currently just a stub.
It logs the input events receives and reinjects them unchanged,
except that it transforms KEYCODE_Q into KEYCODE_Z.
Currently, the accessibility input filter is installed whenever
accessibility is enabled. We'll probably want to change that
so it only enables the input filter when a screen reader is
installed and we want touch exploration.
Change-Id: I35764fdf75522b69d09ebd78c9766eb7593c1afe
this is the first step in unifying surfacetexture and surface.
for this reason the header files were not moved, as most of them
will eventually go away.
NOTE: currently we keep libsurfaceflinger_client.so as an empty
library to workaround prebuilt binaries wrongly linking against
it.
Change-Id: I130f0de2428e8579033dc41394d093f4e1431a00
When 10 fingers are down, reduces the CPU time spent by the InputReader
thread from ~30% to ~5% on Stingray.
Change-Id: Icdf7c91cd5d9039ac3beb38ba9021a05e7fabc80
Added a timeout mechanism to EventHub and InputReader so that
InputMappers can request timeouts to perform delayed processing of
input when needed.
Change-Id: Iec2045baaf4e67690b15eef3c09a58d5cac76897
o Update the copyright date on InputDispatcher_test.cpp and InputReader_test.cpp
because these two files were moved from other places to the current location,
and were actually created in 2010.
bug - 4119349
Change-Id: Ic93b81ddafb58e9e72a2e9e02ca3d9f173d6dca7
1. Single finger tap performs a click.
2. Single finger movement moves the pointer (hovers).
3. Button press plus movement performs click or drag.
While dragging, the pointer follows the finger that is moving
fastest. This is important if there are additional fingers
down on the touch pad for the purpose of applying force
to an integrated button underneath.
4. Two fingers near each other moving in the same direction
are coalesced as a swipe gesture under the pointer.
5. Two or more fingers moving in arbitrary directions are
transformed into touches in the vicinity of the pointer.
This makes scale/zoom and rotate gestures possible.
Added a native VelocityTracker implementation to enable intelligent
switching of the active pointer during drags.
Change-Id: I5ada57e7f2bdb9b0a791843eb354a8c706b365dc
Associate each motion axis with the source from which it comes.
It is possible for multiple sources of the same device to define
the same axis. This fixes new API that was introduced in MR1.
(Bug: 4066146)
Fixed a bug that might cause a segfault when using a trackball.
Only fade out the mouse pointer when touching the touch screen,
ignore other touch pads.
Changed the plural "sources" to "source" in several places in
the InputReader where we intend to refer to a particular source
rather than to a combination of sources.
Improved the batching code to support batching events from different
sources of the same device in parallel. (Bug: 3391564)
Change-Id: I0189e18e464338f126f7bf94370b928e1b1695f2
Report inclusive minimum and maximum ranges for all
axes including X and Y.
Set mouse pointer bounds to 0..width-1, 0..height-1.
Rotate touch and mouse positions more carefully, paying attention
to the maximum bounds when calculating the complement of an axis.
Simplified the InputReader somewhat and removed support for a
couple of poorly defined input device configuration parameters.
We now assume that the touch device provides useful absolute axis
ranges for the X and Y axes since the alternative does not actually
make sense.
Bug: 3413541
Change-Id: I121d28a125c4f9618cb283dc460d33ff1a907023
Ensure that the joystick can always reach -1.0, 0.0 and 1.0 positions
even when noise filtering is applied. (Bug: 3514510)
Add support for a few more standard axes.
Add additional mapping modes for axes.
Some axes are inverted from standard interpretation
or are actually intended to be split into two distict axes
such as left/right trigger controls or accelerator/brake.
Add key layout file for a G25 racing wheel and XBox 360 controller
to tweak behavior. They work fine without them but the axis mappings
are not ideal.
Change-Id: I0fddd90309af4dc14d35f34fe99ed6e521c0b7c7
Added some plumbing to enable the policy to intercept motion
events when the screen is off to handle wakeup if needed.
Added a basic concept of an external device to limit the scope
of the wakeup policy to external devices only. The wakeup policy
for internal devices should be based on explicit rules such as
policy flags in key layout files.
Moved isTouchEvent to native.
Ensure the dispatcher sends the right event type to userActivity
for non-touch pointer events like HOVER_MOVE and SCROLL.
Bug: 3193114
Change-Id: I15dbd48a16810dfaf226ff7ad117d46908ca4f86
Fades out the mouse pointer:
- after 15 seconds of inactivity normally
- after 3 seconds of inactivity in lights out mode
- after a non-modifier key down
- after a touch down
Extended the native Looper to support enqueuing time delayed
messages. This is used by the PointerController to control
pointer fade timing.
Change-Id: I87792fea7dbe2d9376c78cf354fe3189a484d9da
Added support for tracking the mouse position even when the mouse button
is not pressed. To avoid confusing existing applications, mouse movements
are reported using the new ACTION_HOVER_MOVE action when the mouse button
is not pressed.
Added some more plumbing for the scroll wheel axes. The values are
reported to Views but they are not yet handled by the framework.
Change-Id: I1706be850d25cf34e5adf880bbed5cc3265cf4b1
