Driver commands should be issued when driver has started.
Supplicant commands should be issued when Wi-Fi is enabled
Bug: 2339709
Bug: 2371609
Change-Id: I9ba6ddfa0cf4c4b8ca049b0eb7eaaa8edb42bad1
The IP state was not being refreshed when the supplicant transitions
from COMPLETED to ASSOCIATED to COMPLETED. This can lead to
a connected state with no real connection due to old IP settings.
The fix refreshes IP on each connection.
Bug: 2329261
Change-Id: I38cd56369ee2d8ab3e0f06f5c9f5712b9b2f35a0
Some of the native calls were left unsynchronized in the framework. Pre-empted IOCTL call
interrupted by another call from the framework cannot be handled in the driver.
Bug: 2310455
Merge commit '9d3cb9bfc6d7a5f340d2dd8132b201b933687564' into eclair-mr2
* commit '9d3cb9bfc6d7a5f340d2dd8132b201b933687564':
Fix updating Bluetooth icon on status bar and for Wifi.
Status bar uses the SINK_STATE_CHANGE intent to determine the icon.
This intent also has the device. Thus, we can get this intent for any
device and we update the icon wrongly. The same problem is with Wifi.
This was not commonly observed till now, but with the car dock changes
its easy to reproduce as we can get an incoming connection from the
car's bluetooth system. For Wifi, this will cause coexistance issues
especially with desk docks.
Dr No: Eastham
Bug: 2133530
The driver can now report to us that they are hosed and we'll shut
down wifi and restart it - only to be used as a last resort.
Also fixing synch problem with updateWifiState.
bug: 2173119
Merge commit '16cb04ab1cd88d917fdd34a9063fe4a9707aa5b1' into eclair-mr2
* commit '16cb04ab1cd88d917fdd34a9063fe4a9707aa5b1':
Add a little logging to diagnose wifi cycle bug
+ push the double-quote handling down to framework.
wpa_supplicant keeps the ssid in a quoted string in the config file. However,
the UI currently needs to handle the quoted string which makes it difficult
to handle the SSID containing the quotes. The change will move the
supplicant-specific double-quote handling from UI to framework, i.e. to
add/remove doubel-quotes in framework instead of in UI settings.
We already had a delay if we were associated, but we have some race conditions
we think will be masked if we delay the driver stop for the other cases
too. Don't wait as long (2 min instead of 15).
bug: 2147260
The process for starting wifi was using a wakelock around a message-pass and this was causing
an exception for meer mortals (who don't have WAKE_LOCK permission).
bug: 1750535
The supplicant can take up to 15 seconds to start - setting the number of wifi channels
immediately after requested wifi start often will fail.
Changed to set the number of channels when the supplicant is reported as alive.
bug:2083601
This is a large batch, and covers:
-- Bluetooth Device Discovery --
BluetoothAdapter.ACTION_DISCOVERY_STARTED
BluetoothAdapter.ACTION_DISCOVERY_FINISHED
BluetoothAdapter.startDiscovery()
BluetoothAdapter.cancelDiscovery()
BluetoothAdapter.isDiscovering()
-- Bluetooth bonding (pairing) --
BluetoothAdapter.getBondedDevices()
BluetoothDevice.ACTION_BOND_STATE_CHANGED
BluetoothDevice.EXTRA_BOND_STATE
BluetoothDevice.EXTRA_PREVIOUS_BOND_STATE
BluetoothDevice.BOND_NONE
BluetoothDevice.BOND_BONDING
BluetoothDevice.BOND_BONDED
BluetoothDevice.getBondState()
BluetoothDevice.createBond()
BluetoothDevice.cancelBondProcess()
BluetoothDevice.removeBond()
-- BluetoothClass --
BluetoothDevice.ACTION_CLASS_CHANGED
BluetoothDevice.EXTRA_CLASS
BluetoothDevice.getBluetoothClass()
BluetoothClass.Service.*
BluetoothClass.Device.Major.*
BluetoothClass.Device.*
BluetoothClass.getDeviceClass()
BluetoothClass.getMajorDeviceClass()
BluetoothClass.hasService()
-- Misc BluetoothDevice --
BluetoothDevice.ACTION_ACL_CONNECTED
BluetoothDevice.ACTION_ACL_DISCONNECTED_REQUESTED
BluetoothDevice.ACTION_ACL_DISCONNECTED
BluetoothDevice.ACTION_DISCOVERED
BluetoothDevice.ACTION_NAME_CHANGED
BluetoothDevice.EXTRA_DEVICE
BluetoothDevice.EXTRA_NAME
BluetoothDevice.EXTRA_RSSI
-- Misc BluetoothAdapter --
BluetoothAdapter.ACTION_LOCAL_NAME_CHANGED
BluetoothAdapter.EXTRA_LOCAL_NAME
BluetoothAdapter.checkBluetoothAddress()
I deprecated BluetoothIntent and moved each intent into the class it relates
to.
Change-Id: I877b1280428ab46278b2bc25668bb44cda22dc36
If the new system settings value for AIRPLANE_MODE_TOGGLEABLE_RADIOS
contains RADIO_WIFI, then the user will be allowed to enable Wifi
while in airplane mode.
Turning on airplane mode will still disable Wifi, but the user will
be free to reenable it in the Settings app.
Signed-off-by: Mike Lockwood <lockwood@android.com>
Merge commit '356d4a14aa96cf52c16f7a4d381044ce28b01af3'
* commit '356d4a14aa96cf52c16f7a4d381044ce28b01af3':
Add the phase2 field for EAP WiFi configuration.
Apparently this code was not 100% correct, and now the Wifi driver is responsible
for setting the scan mode to active for hidden networks, so this is no longer needed.
Signed-off-by: Mike Lockwood <lockwood@android.com>
Merge commit '463aacfbd220c9ef2f6ed915d54092289fdac05b'
* commit '463aacfbd220c9ef2f6ed915d54092289fdac05b':
wifi: WifiManager.startScan() will now do passive scans by default.
Active scans will only happen if a hidden AP is in use, or if the new method
WifiManager.startScanActive() is called.
This fixes some audio playback problems with bluetooth A2DP.
Signed-off-by: Mike Lockwood <lockwood@android.com>
Merge commit 'fa6c7111fe58e09a92741c7655221c3629d3220e'
* commit 'fa6c7111fe58e09a92741c7655221c3629d3220e':
WifiService: use wifi association state to determine if we should suspend wifi instead of
1. the certtool.h is modified for avoiding the side effect,
for saving the configuration with wpa_supplicant.
2. put the loadLibrary back in CertTool.java
3. Fix incorrect JNI declarations.
Previously only the level was being updated, resulting in out of date values
being left in the cache.
Patch was provided by Motorola.
Signed-off-by: Mike Lockwood <lockwood@android.com>
Merge commit '19cd309f9eccdf8454dc6e5076013588b7a170a3'
* commit '19cd309f9eccdf8454dc6e5076013588b7a170a3':
Add the EAP related fields for WiFi configuration.
