Bug: 10916655
Add a stash where the SyncHandler can copy and place
msgs rather than run them. After boot is complete
we iterate through the stash in order and send the
messages off.
Change-Id: I9c175ee79fe60952346003a29225b8687979b44e
Fixes jank exposed in 10881705. Specifically background activity
animating up along with translucent activity. Repro steps on manta:
1. From home start Settings.
2. Press home.
3. From home start Downloads (translucent activity that takes 85% of
screen).
4. Observe that as Downloads zooms up the 15% boundary that should be
dimly transparent are showing Settings.
The cause was that there is a finishing activity in the Downloads task
that was used to launch the DownloadsActivity. The existence of that
activity kept the logic from recognizing that the home activity was
behind the DownloadsActivity, not the Settings activity.
This fix descends through all of the activities in a task sitting on
home and makes sure that they only keep home from showing if such
activities are not finishing and visible.
Change-Id: I607afce6b0000b4db634f2ce40a6c37fcee369d7
- Make sure SystemBars calls onConfigurationChanged on the
status bar
- Remove redundant ACTION_CONFIGURATION_CHANGED receiver in
BaseStatusBar & move this code into onConfigurationChanged
- Force locale refresh even if a configuration change
touches only the layout direction
Bug: 10113357
Change-Id: I92902d25cbae77f2558cfb85482484b11dc7294e
Not dealing with the case where there is a null list.
Also fixed some bugs I found while looking at this:
- When resetting the stats, we would use a newly computed time stamp
for the total durations rather than the one we used to reset the
proc/service entries. This would result in them being able to be
slightly > 100%.
- There was a bug in how we split a single process state into its
per-package representation, where we would but the cloned process
state into the new package's entry (instead of properly for its
own package entry), to be immediately overwritten by the new
process state we make for that package. This could result in
bad data for processes that have multiple packages.
- There was a bug in resetting service stats, where we wouldn't
update the overall run timestamp, allowing that time to sometimes
be > 100%.
- There was a bug in computing pss data for processes with multiple
packages, where the pss data was not distributed across all of the
activity per-package process states.
- There was a bug in computing the zram information that would cause
it to compute the wrong value, and then never be displayed.
Finally a little code refactoring so that ProcessState and ServiceState
can now share a common implementation for the table of duration values.
Change-Id: I5e0f4e9107829b81f395dad9419c33257b4f8902
When a new RemoteControlDisplay gets registered, don't cause all
existing RemoteControlDisplays to re-receive RemoteControl
information they already have.
Bug 8417073
Change-Id: Icc8e7104d6870f748fddd702692789dbaef948ac
This ignores any previous setting and instead uses
a value set at build time. This does not preclude
us from using some other signal to determine country
for wifi channel limits.
bug:10513734
Change-Id: Ib82c07285af70fbd82eb0466b7391979ebc8be10
Allow an app to set the artwork configuration at any point
regardless of the registration state, and cache the width/height
values.
If the RemoteController is already registered, apply them.
If the RemoteController is not registered, use the cached value
when the object gets registered.
Bug 10862527
Change-Id: If633e2b9383e7d59690288d2271113e98b195cd8
Various authenticator results such as getAuthToken and addAccount might
result in an Intent returned to the AccountManager caller. A malicious
authenticator could exploit the fact that the Settings are a system app,
lead the user to launch add account for their account type and thus get
Settings to use the intent to start some arbitrary third parties Activity.
The fix is to make sure that the UID of the app associated with Activity
to be launched by the supplied intent and the Authenticators UID share
the same signature. This means that an authenticator implementer can only
exploit apps they control.
Bug: 7699048
Change-Id: I34330454c341e6a8422ca1ed3b390466a0feedce
Make sure that moveStackWindowsLocked() is called every time that the
stack ordering changes. This will rebuild the window list. Previously
the call was being made after the moveStack() call which got forgotten
in the addAppToken() causing the home stack to obscure incoming phone
and video calls.
Fixes bug 10023223.
Fixes bug 10678010.
Maybe fixes bug 10858941.
Change-Id: I59922dc979a19210008eac1f528704984c63c886
Do not use the shortcut of the package name to identify the home
activity.
Fixes bug 10963726.
Fixes bug 10920950.
Change-Id: I725781a26672b055a816994aee6ea458a7f07c88
Killing the GEL search results was killing everything in its package.
This fix keeps the home process from being killed when a task in its
package is killed.
Fixes bug 10927223.
Change-Id: I56e75f0a0118885a1604cbd70320bbdb4f8cf1a2
While the logic was correct the array map that holds the list of pritners
does not keep the position of the items constant. Switched to linked hash
map which gives this guarantee.
bug:10955751
Change-Id: Idbbe14d753e6a1ad1002f2289b10cb62d7f9f040
When the transport controls are active, set the relevant art as a
fullscreen background for the keyguard.
Change-Id: I1e8a87f242153a2a2c5bf94dbd15f0fd3e07dde3
When loading historical records for previously used printers we
now ignore the ones whose target print service is not installed.
bug:10955652
Change-Id: Ib295e7d88ed3c308ef6d8a11bdc1792ebbb6d526
Keyguard wasn't re-establishing a connection to the RCD after a
crash. This results in a missing transport until the session reboots.
Fixes bug 10204949
Change-Id: Ia030eacbcf1e3cfa9ee948c841c95d2040f9c1e0
1. We want the files for a print job to be removed as early as possible
typically because the print job was cancelled, completed, the app
or the spooler crashed during print job construction. We were keeping
around in the spooler and hence to disc infos for jobs that are in
final state since the app that created them may hold a reference to
a local print job objec whose info it can access to get the latest
print job state potentially after the job reached final state. The
issue was that we were persisting to disc created print jobs which
were during construction which requires careful handling for the
various cases above. This is tricky and error prone.
We used to tell the spooler to forget the print jobs infos when the
app that created them died. The implementation to forget a print
job was not careful and was nuking currently running print jobs in
addition to the ones in a terminal state. Further, if the app dies
before a print job is completed we were left with a stale print
job in the spooler since we missed the signal to forget it (assuming
we forget only inactive jobs). These issues suggest that the approach
is problematic.
Now we have a cache of print job infos for the jobs an app created.
This cache is updated when the state of a print jobs changes using
the new print job state observation code. When the app dies we
remove the cached jobs for that app. Now if the app calls to get
the print jobs it gets the cached ones, i.e. the print jobs it
created during its lifetime, plus the print jobs that are still
active fetched from the spooler. Note that transient state cannot
be kept in the spooler since we unbind from it if there is no
work and it may get killed.
2. Improved the print sub-system logging code to show the cached
print job infos for apps and also dump the print job PDF file
names.
bug:10958357
Change-Id: I6f7c1968b6b7ba5be182a10df044ff7ea1fc3a61
Yet another iteration from UX on how roots should be ordered. Since
we no longer categorize by type, remove from public API. Updated
asset drop with new dividers.
Update public API docs to be explicit about required columns. Hide
flags and columns that aren't required for third-party apps.
Move remainder of potentially blocking work to AsyncTasks, including
creating directories, picked root resolution, and creation of new
documents once picked.
Improve performance of layouts by removing baseline alignment and
reduce hierarchy depth. Set alpha on ImageViews directly to avoid
offscreen rendering hit.
Limit returned recents to 45 days. Show load in recents when still
waiting for backends. Show empty message when no recents stacks to
create from. Use unique key when saving recent stacks.
Bug: 10941423, 10819454, 10964412, 10960718
Change-Id: I08cf589dcda7e203acf67928f4d30322ae36ee94
The home activity was being returned to when any activity in a task
that was launched from home crashed. If there were still activities
left in the task then the crash should have brought up those
activities next, not home.
This may be a partial fix for crashes where the back stack was showing
up under launcher icons. Bug 10858941.
Change-Id: I840a25bd8395bfce46f4e21b112d78b12884706d
Since binder call permissions are not transitive by design,
the proper way to fix this is to have the call talk directly
to keyguard from the navigation bar.
Fixes bug 9409008
Change-Id: Ibd90a79bb638c969b514455a2ad93c6ff668222d
* commit '584d4f69e2f8e904f50169ad223b244de72aa5ed':
remove Remembering Your Users class from nav. Separate CL will redirect these pages to the Google Auth doc.
