Problem:
Connect to AP with WEP security.
Change AP's WEP password.
Phone will quickly reassociated (less than in 5 sec) and will not restart full "reconnect".
Indication will show "connected" but it will be no network access.
Fix: (for non-static IP only)
With WEP mode, the association could be successful if we change the AP's WEP password. However,
the phone wont be able to send/recv any traffic with the old password. What we could quickly
fix here is to send the DHCP request if the network is not configured to use static IP. We
can do nothing but ping access point to see if it we are able to communicate with it.
Only do the full signal strength calc when we need to, otherwise use
an approximate value.
This change was introduced a while back but was lost in some merge.
bug: 2125543
The supplicant can take up to 15 seconds to start - setting the number of wifi channels
immediately after requested wifi start often will fail.
Changed to set the number of channels when the supplicant is reported as alive.
bug:2083601
Split BluetoothDevice into BluetoothDevice and BluetoothAdapter.
BluetoothAdapter: Represents the local BT adapter. Operations on the local
adapter (start a scan, etc).
BluetoothDevice: Represents a remote BT device. Operations on remote devices
(pair, connect, etc).
IBluetoothDevice.aidl -> Bluetooth.aidl
BluetoothDeviceService.java -> BluetoothDeviceService.java
TODO:
Javadoc
Merge commit '41c104339951e0e5e78240e1f48455c21b3ba5fd'
* commit '41c104339951e0e5e78240e1f48455c21b3ba5fd':
Fix MulticastLock API to match WifiLock API.
This fixes a problem that resulted in the interface not being up when resuming
an authenticated connection.
Signed-off-by: Mike Lockwood <lockwood@android.com>
Merge commit '356d4a14aa96cf52c16f7a4d381044ce28b01af3'
* commit '356d4a14aa96cf52c16f7a4d381044ce28b01af3':
Add the phase2 field for EAP WiFi configuration.
Apparently this code was not 100% correct, and now the Wifi driver is responsible
for setting the scan mode to active for hidden networks, so this is no longer needed.
Signed-off-by: Mike Lockwood <lockwood@android.com>
Merge commit '463aacfbd220c9ef2f6ed915d54092289fdac05b'
* commit '463aacfbd220c9ef2f6ed915d54092289fdac05b':
wifi: WifiManager.startScan() will now do passive scans by default.
Active scans will only happen if a hidden AP is in use, or if the new method
WifiManager.startScanActive() is called.
This fixes some audio playback problems with bluetooth A2DP.
Signed-off-by: Mike Lockwood <lockwood@android.com>
Merge commit '3bc64a2cb97da7bf7dc203416ad6c7d86c5925fc'
* commit '3bc64a2cb97da7bf7dc203416ad6c7d86c5925fc':
WifiManager: Limit the number of WifiLocks that can be active simultaneously.
1. the certtool.h is modified for avoiding the side effect,
for saving the configuration with wpa_supplicant.
2. put the loadLibrary back in CertTool.java
3. Fix incorrect JNI declarations.
This is to prevent a bad app from using up all the global references in the
system process due to allocating too many DeathRecipients.
Signed-off-by: Mike Lockwood <lockwood@android.com>
Merge commit '19cd309f9eccdf8454dc6e5076013588b7a170a3'
* commit '19cd309f9eccdf8454dc6e5076013588b7a170a3':
Add the EAP related fields for WiFi configuration.
Merge commit '1e2e44e900cb9a25d548e27a20d65292a7f321bc'
* commit '1e2e44e900cb9a25d548e27a20d65292a7f321bc':
Fix wifi multicast API for public use.
Revert "Bug fixes and performance improvements"
That'll make it stop trying to interpret older records with the new format.
Also applied other comments involving name changes to remove un-needed 'Wifi' labels in WifiManager API, etc.
Put Wifi into an idle state immediately if the screen is turned off and the Wifi interface has no IP address.
We will continue to keep Wifi up for 15 minutes in the case where the screen is turned off when Wifi is fully connected.
This will allow us to go into a low power mode faster when Wifi is not actively being used.
It also avoids bringing up Wifi if the user just turns on the screen for a few seconds to check the clock, etc.
Fixes bug b/1736920
Signed-off-by: Mike Lockwood <lockwood@android.com>
that ought to be exposed. Hid and deprecated the single-arg public
constructor for NetworkInfo, and modified a CTS test that was testing it.
Ran the android.net test package to make sure it still works.
Original author: ers
Merged from: //branches/cupcake/...
Automated import of CL 145980
take place.
This has the same underlying cause as bug #1739874, so this fixes that
bug as well. The problem was that if the supplicant was in the DORMANT
state at the time a scan-only Wi-Fi lock was released, the command to
stop the Wi-Fi driver would never be issued. This had two main results:
first, the driver would stay awake when the screen was blank and it was
supposed to be sleeping, leading to excessive battery drain, and second,
when the screen was turned back on, there would be no DRIVER-STARTED
event generated (because the driver was already running). The
DRIVER-STARTED event is the trigger for the framework to issue a
RECONNECT command to the supplicant to cause it leave the DORMANT state
and look for available remembered networks.
To assist in tracking down this problem, and any such problems in the
future, I added four counters to keep track of how many times full and
scan-only Wi-Fi locks are acquired and released. The counter values
are output in the dump() method of WifiService. While doing this, I
noticed that because of missing "break" statements, the battery stats
that keep track of how much time Wi-Fi locks are held were including
the time for full locks in the time reported for scan-only locks.
Original author: ers
Merged from: //branches/cupcake/...
Automated import of CL 143266
