isUserSwitcherEnabled now returns false if multi-user is disabled(
supportsMultipleUsers() returns false).
Removed GUEST_USER_ENABLED setting and replaced with DPM.getGuestUserDisabled
check. It currently always returns false, but will be replaced with an actual
policy check.
Bug: 17571233
Change-Id: I41853e8b321b2537952cac5d92e88bfdb8cbd9a8
Added a new SLEEP_TIMEOUT setting which governs how long the device will
remain awake or dreaming without user activity. By default this
value is set to -1 which maintains today's existing behavior.
We basically represent the time we are allowed to be dreaming as a new
kind of user activity summary state called DREAM, similar to BRIGHT
and DIM. When the sleep timeout expires, the state is cleared and
the dream ends.
Bug: 17665809
Change-Id: I59aa7648dcec215f1285464fc1134934a09230e5
Add a notification for those users that teaches them how to re-enable
the notifications.
Bug: 15934899
Depends-On: Ie0bcc207c4f331def207e588bbad36b8986fe114
Change-Id: I4a169e268042cfcaa4ad80cdf205904f9c90e76d
Setting for controlling if guest is enabled on the device.
Setting to hint to apps that they should skip showing first use clings.
User switcher handles creation and deletion of the guest user.
Some tweaks to the user switcher to show some feedback and make the icons
circular.
Change-Id: I187dc381d2ee7c372ec6d35e14aa9ea4dfbe5936
A new global settings to name a device. This will centralize the notion
of device name/nickname and should be used by Cast, Bluetooth, TV Remote and other
advertising applications/services.
Change-Id: I2294deb5c0d1002fb2fc158f62a2d5643d90d749
Battery sounds will always play when the screen is on, and
then for Settings.Global.LOW_BATTERY_SOUND_TIMEOUT
milliseconds after the screen goes off. After that, low
battery alerts will be pushed out the airlock until the
screen comes back on again.
If battery sounds are suppressed via this mechanism you'll
see a log line like:
V/PowerUI ( 3161): screen off too long (5779ms, limit
5000ms): not waking up the user with low battery sound
The default value of LOW_BATTERY_SOUND_TIMEOUT is a settings
provider resource: R.integer.def_low_battery_sound_timeout.
Bug: 10487557
Change-Id: Iddd42038aa630631dc8f1833f20fcc5a0c646681
There was no default value for parameter "dock_audio_media_enabled"
in global settings and because of that it couldn't be obtained before
Settings app first start and improper actions, such as FORCE_NONE
sending to AudioSystem instead of FORCE_ANALOG_DOCK, were taken.
This patch sets default value to 'true'.
Change-Id: Idbe343519db15f806f3a237e8b39f8420b9edde1
Signed-off-by: Dmytro Dubovyk <dmytro.dubovyk@ti.com>
Only plays a tone if the battery level is below 95% which
is the same heuristic used when determining whether to turn
the screen on.
Use new low battery and wireless charging sounds on Mako.
Bug: 7371658
Change-Id: Ia4527ec398d024ee418a4287e1fcbf0ec83bcc24
Optimize for updating mNetworkPreference according to device's networkAttributes
setting from overlay config.xml when connectivityservice start.
Change-Id: I90286332d4f453038f1ddac7dd9d1265d96b4859
Signed-off-by: Jianzheng Zhou <jianzheng.zhou@freescale.com>
So that:
- the values can be shared (to fix assoc bug)
- the values can be customized in product overlays
Bug:7373284
Change-Id: I37f037082523a3d975f6014f36afa28c60117372
Existing primary users were never being marked as complete,
causing things that relied on this (e.g. showing the quick settings panel)
to break.
Bug:7282088
Change-Id: I9c8622f3cd0fb99a44477946d3db22fa2cbbc6fc
Add a setting to globally disable Wifi display.
Fixed a bug where the wifi display broadcast receiver
was running on the wrong thread.
Removed the wifi-display QuickSettings dialog, all functionality
has been moved to Settings.
Bug: 7178216
Bug: 7192799
Change-Id: I9796baac8245d664cf28fa147b9ed978d81d8ab9
This change is the initial check in of the screen magnification
feature. This feature enables magnification of the screen via
global gestures (assuming it has been enabled from settings)
to allow a low vision user to efficiently use an Android device.
Interaction model:
1. Triple tap toggles permanent screen magnification which is magnifying
the area around the location of the triple tap. One can think of the
location of the triple tap as the center of the magnified viewport.
For example, a triple tap when not magnified would magnify the screen
and leave it in a magnified state. A triple tapping when magnified would
clear magnification and leave the screen in a not magnified state.
2. Triple tap and hold would magnify the screen if not magnified and enable
viewport dragging mode until the finger goes up. One can think of this
mode as a way to move the magnified viewport since the area around the
moving finger will be magnified to fit the screen. For example, if the
screen was not magnified and the user triple taps and holds the screen
would magnify and the viewport will follow the user's finger. When the
finger goes up the screen will clear zoom out. If the same user interaction
is performed when the screen is magnified, the viewport movement will
be the same but when the finger goes up the screen will stay magnified.
In other words, the initial magnified state is sticky.
3. Pinching with any number of additional fingers when viewport dragging
is enabled, i.e. the user triple tapped and holds, would adjust the
magnification scale which will become the current default magnification
scale. The next time the user magnifies the same magnification scale
would be used.
4. When in a permanent magnified state the user can use two or more fingers
to pan the viewport. Note that in this mode the content is panned as
opposed to the viewport dragging mode in which the viewport is moved.
5. When in a permanent magnified state the user can use three or more
fingers to change the magnification scale which will become the current
default magnification scale. The next time the user magnifies the same
magnification scale would be used.
6. The magnification scale will be persisted in settings and in the cloud.
Note: Since two fingers are used to pan the content in a permanently magnified
state no other two finger gestures in touch exploration or applications
will work unless the uses zooms out to normal state where all gestures
works as expected. This is an intentional tradeoff to allow efficient
panning since in a permanently magnified state this would be the dominant
action to be performed.
Design:
1. The window manager exposes APIs for setting accessibility transformation
which is a scale and offsets for X and Y axis. The window manager queries
the window policy for which windows will not be magnified. For example,
the IME windows and the navigation bar are not magnified including windows
that are attached to them.
2. The accessibility features such a screen magnification and touch
exploration are now impemented as a sequence of transformations on the
event stream. The accessibility manager service may request each
of these features or both. The behavior of the features is not changed
based on the fact that another one is enabled.
3. The screen magnifier keeps a viewport of the content that is magnified
which is surrounded by a glow in a magnified state. Interactions outside
of the viewport are delegated directly to the application without
interpretation. For example, a triple tap on the letter 'a' of the IME
would type three letters instead of toggling magnified state. The viewport
is updated on screen rotation and on window transitions. For example,
when the IME pops up the viewport shrinks.
4. The glow around the viewport is implemented as a special type of window
that does not take input focus, cannot be touched, is laid out in the
screen coordiates with width and height matching these of the screen.
When the magnified region changes the root view of the window draws the
hightlight but the size of the window does not change - unless a rotation
happens. All changes in the viewport size or showing or hiding it are
animated.
5. The viewport is encapsulated in a class that knows how to show,
hide, and resize the viewport - potentially animating that.
This class uses the new animation framework for animations.
6. The magnification is handled by a magnification controller that
keeps track of the current trnasformation to be applied to the screen
content and the desired such. If these two are not the same it is
responsibility of the magnification controller to reconcile them by
potentially animating the transition from one to the other.
7. A dipslay content observer wathces for winodw transitions, screen
rotations, and when a rectange on the screen has been reqeusted. This
class is responsible for handling interesting state changes such
as changing the viewport bounds on IME pop up or screen rotation,
panning the content to make a requested rectangle visible on the
screen, etc.
8. To implement viewport updates the window manger was updated with APIs
to watch for window transitions and when a rectangle has been requested
on the screen. These APIs are protected by a signature level permission.
Also a parcelable and poolable window info class has been added with
APIs for getting the window info given the window token. This enables
getting some useful information about a window. There APIs are also
signature protected.
bug:6795382
Change-Id: Iec93da8bf6376beebbd4f5167ab7723dc7d9bd00
Framework changes to store and read a secure setting for package verification.
Default is on/true.
This setting will be turned on/off via the Settings app.
Bug: 7082362
Change-Id: I6f93d3136add8af0dbbdc664f0473c5f5b7e3fee
Creates a defult.xml setting for WiFi sleep policy.
It is now possible, through device overlays, to change
the default sleep policy to e.g. never in order to improve
user experience of WiFi.
Change-Id: Ie459b8e70fdbc7c605452fe0692d7bc26460e939
The old version of the script is broken and is cached due to an error in
our gstatic configuration. We had to change the name to avoid hitting the
cached version on external proxies.
Bug: 6702042
Change-Id: I0e5ee8b3a6ae8c7ba11f5760f2f99d4b5614ac97
The URl from which to inject a screen-reader for WebView accessiblity support should be
configurable because: 1) The accessibility engineering team should be able to point
devices to a staging build of the screen-reader; 2) We would like to be able to change
this URL via the Google services mechanism.
bug:5718543
Change-Id: I3d4d343f1c93e0e0173f04b2912949fe8a3566b9
By default we do not speak passwords if the user has no headset. However,
many users find this too restrictive and would like a way to enable
password announcement. While we cannot speak the passwords all the time
,to avoid leaking them, we expose a preference so each user can choose
the option that best works for him/her.
bug:5712607
Change-Id: I6eb0c40834abe5297f7dc74be02d180a5bef0174
This reverts commit 03da2f00aac04e6565a02cf5a9bf6bb1ec926930.
Committer: Tom Taylor <tomtaylor@google.com>
On branch revertsetting
Changes to be committed:
(use "git reset HEAD <file>..." to unstage)
modified: api/current.txt
modified: core/java/android/provider/Settings.java
modified: core/java/android/provider/Telephony.java
modified: packages/SettingsProvider/res/values/defaults.xml
modified: packages/SettingsProvider/src/com/android/providers/settings/DatabaseHelper.java
We've decided not to disable messaging notifications with a secure setting.
Instead, all the work will be done within the messaging app itself.
Change-Id: Icde6894e76da1007b6026c8ec7dc56e488453c06
Bug 5552615
We're adding a new intent to allow 3rd party apps to disable
the Messaging app's notification. We want any app to be able to query
the setting of whether sms notifications are on or off, but only allow
system apps, particularly the Messaging app, to change that setting.
Other apps can change the setting by firing off an intent which brings
up a dialog activity in the Messaging app that'll let them turn off
Messaging notifications.
Change-Id: I4d2721191b86010efb383a24c28d911496440657
Combined volume panel only in tablets. On phones show active volume.
Added dummy assets for ring+notification icon.
Deprecated the NOTIFICATION_USES_RING_VOLUME. Now they are always
tied together. Audio manager changes still required to ensure that.
Initialize all feedback sounds to true.
Change-Id: I3ad7890c9be9334eedb5f3b709a4b6995fe24638
