When an inset computer is registered with the view tree observer,
we report content insets to the window manager. When an inset computer
is subsequently unregistered, we must take care to clear these insets.
This patch remembers whether the previously computed insets were
non-empty so that it can force insets to be reset when needed.
Bug: 10840662
Change-Id: I4cce5ba64cc5234b98363b025ac4bb42e64349f1
Handle MEDIA_SKIPPED event
Prevent notifyTimedEvent events (REFRESH_AND_/NOTIFY_TIME)
to eclipse NOTIFY_SEEK events.
Add automatic seek when time drifts too much. This should
not happen under normal circumstances, but is there to recover
from any unannounced media time discontinuity.
Change-Id: I8d7fdac2b0b6a9e62d2860461e6a25788e77fef8
Signed-off-by: Lajos Molnar <lajos@google.com>
Bug: 10954008
Bug: 10918599
Shaves ~1-2MB of transient memory usage from setting a hardware layer
on a view that's not hardware accelerated, resulting in it falling
back to a software layer which allocates a bitmap
Also a bit of dejanking as a result of not hitting GC_FOR_ALLOC
Change-Id: Iff00d383fca710147a48f31c7eee2b728b8412dc
Increase padding on the left to more visually center the text within the touch target
Bug: 10074982
Change-Id: I2c622b0edd427a4b15f2f3b25a0a124853ed2367
The logic that updated the locale was only running at times
the DateView should have been updating its display, namely,
when the view was visible on-screen.
The new version trades a small amount of efficiency (the
broadcast receiver is now active at all times, and the date
is re-formatted each TIME_TICK) in exchange for simplicity
and correctness.
Bug: 10725912
Change-Id: I2f0988ed478374ed0eb0c76c3d8caed6c86eb8df
Bug: 10916655
Add a stash where the SyncHandler can copy and place
msgs rather than run them. After boot is complete
we iterate through the stash in order and send the
messages off.
Change-Id: I9c175ee79fe60952346003a29225b8687979b44e
Fixes jank exposed in 10881705. Specifically background activity
animating up along with translucent activity. Repro steps on manta:
1. From home start Settings.
2. Press home.
3. From home start Downloads (translucent activity that takes 85% of
screen).
4. Observe that as Downloads zooms up the 15% boundary that should be
dimly transparent are showing Settings.
The cause was that there is a finishing activity in the Downloads task
that was used to launch the DownloadsActivity. The existence of that
activity kept the logic from recognizing that the home activity was
behind the DownloadsActivity, not the Settings activity.
This fix descends through all of the activities in a task sitting on
home and makes sure that they only keep home from showing if such
activities are not finishing and visible.
Change-Id: I607afce6b0000b4db634f2ce40a6c37fcee369d7
- Make sure SystemBars calls onConfigurationChanged on the
status bar
- Remove redundant ACTION_CONFIGURATION_CHANGED receiver in
BaseStatusBar & move this code into onConfigurationChanged
- Force locale refresh even if a configuration change
touches only the layout direction
Bug: 10113357
Change-Id: I92902d25cbae77f2558cfb85482484b11dc7294e
Not dealing with the case where there is a null list.
Also fixed some bugs I found while looking at this:
- When resetting the stats, we would use a newly computed time stamp
for the total durations rather than the one we used to reset the
proc/service entries. This would result in them being able to be
slightly > 100%.
- There was a bug in how we split a single process state into its
per-package representation, where we would but the cloned process
state into the new package's entry (instead of properly for its
own package entry), to be immediately overwritten by the new
process state we make for that package. This could result in
bad data for processes that have multiple packages.
- There was a bug in resetting service stats, where we wouldn't
update the overall run timestamp, allowing that time to sometimes
be > 100%.
- There was a bug in computing pss data for processes with multiple
packages, where the pss data was not distributed across all of the
activity per-package process states.
- There was a bug in computing the zram information that would cause
it to compute the wrong value, and then never be displayed.
Finally a little code refactoring so that ProcessState and ServiceState
can now share a common implementation for the table of duration values.
Change-Id: I5e0f4e9107829b81f395dad9419c33257b4f8902
When a new RemoteControlDisplay gets registered, don't cause all
existing RemoteControlDisplays to re-receive RemoteControl
information they already have.
Bug 8417073
Change-Id: Icc8e7104d6870f748fddd702692789dbaef948ac
This ignores any previous setting and instead uses
a value set at build time. This does not preclude
us from using some other signal to determine country
for wifi channel limits.
bug:10513734
Change-Id: Ib82c07285af70fbd82eb0466b7391979ebc8be10
Allow an app to set the artwork configuration at any point
regardless of the registration state, and cache the width/height
values.
If the RemoteController is already registered, apply them.
If the RemoteController is not registered, use the cached value
when the object gets registered.
Bug 10862527
Change-Id: If633e2b9383e7d59690288d2271113e98b195cd8
Various authenticator results such as getAuthToken and addAccount might
result in an Intent returned to the AccountManager caller. A malicious
authenticator could exploit the fact that the Settings are a system app,
lead the user to launch add account for their account type and thus get
Settings to use the intent to start some arbitrary third parties Activity.
The fix is to make sure that the UID of the app associated with Activity
to be launched by the supplied intent and the Authenticators UID share
the same signature. This means that an authenticator implementer can only
exploit apps they control.
Bug: 7699048
Change-Id: I34330454c341e6a8422ca1ed3b390466a0feedce
Make sure that moveStackWindowsLocked() is called every time that the
stack ordering changes. This will rebuild the window list. Previously
the call was being made after the moveStack() call which got forgotten
in the addAppToken() causing the home stack to obscure incoming phone
and video calls.
Fixes bug 10023223.
Fixes bug 10678010.
Maybe fixes bug 10858941.
Change-Id: I59922dc979a19210008eac1f528704984c63c886
Do not use the shortcut of the package name to identify the home
activity.
Fixes bug 10963726.
Fixes bug 10920950.
Change-Id: I725781a26672b055a816994aee6ea458a7f07c88
Killing the GEL search results was killing everything in its package.
This fix keeps the home process from being killed when a task in its
package is killed.
Fixes bug 10927223.
Change-Id: I56e75f0a0118885a1604cbd70320bbdb4f8cf1a2
While the logic was correct the array map that holds the list of pritners
does not keep the position of the items constant. Switched to linked hash
map which gives this guarantee.
bug:10955751
Change-Id: Idbbe14d753e6a1ad1002f2289b10cb62d7f9f040
When the transport controls are active, set the relevant art as a
fullscreen background for the keyguard.
Change-Id: I1e8a87f242153a2a2c5bf94dbd15f0fd3e07dde3
When loading historical records for previously used printers we
now ignore the ones whose target print service is not installed.
bug:10955652
Change-Id: Ib295e7d88ed3c308ef6d8a11bdc1792ebbb6d526
