This fixes a bug where the device fails to lock when DevicePolicyManagerService
requests the device to be locked and the screen was off because the user hit
the power button.
The change allows DPMS to directly invoke screen lock, bypasssing the screen state.
Change-Id: Iecdda6fc61e9c519119de495be23c69c3b983921
1. Except as otherwise indicated, orientation change happens once
the predicted rotation has been stable for 40ms. Noise is
suppressed by a low-pass filter with a 200ms time constant which
seems to be about as small as is practical given the quality
of the sensor data.
2. If the magnitude exceeds a threshold (excessive noise or freefall),
resets the predicted orientation.
Doesn't happen very often even when shaking the device.
This heuristic mainly protects the detector from spurious tilt due
to inaccurate determination of the gravity vector.
3. If the device was previously in a flat posture (on a table for at
least 1000ms), then it must move out of that posture for at least
500ms before the next orientation change will happen.
This heuristic suppresses most spurious rotations that happen while
picking up the device.
4. If the device is tilted away from the user by 20 degrees within
a span of 300ms, the device is said to be swinging and at least
300ms must elapse after the device stops swinging before the
next orientation change will happen.
This heuristic suppresses some but not all spurious rotations that
happen while putting down a device. Unfortunately, this heuristic
sometimes triggers a false positive when turning the device very
rapidly due to accelerometer noise. The 300ms pause is a compromise
so that occasional mispredicted swings don't significantly delay
the rotation.
Bug: 5796249
Change-Id: Id7b36c4c563e35b70d6a7ac36d04f3c3d6ea5811
The idea is that this is a device which is more-or-less headless. It
might have some limited interaction capabilities, but it's not something
that you want to rely on having.
Change-Id: Ib92f53a120bf83de781728011721a4859def7d9f
There's no printf %zd on Mingw/Cygwin so the verbose
printf crashes aapt.
SDK bugs: 20395, 20986
Bug: 5742142
(cherry picked from commit f51125d8429ffa71c57ba6fbdca9effc72642a9b)
Change-Id: I7545734ce8ce4a1f3e95f8a255daa8a909f870a1
Both animations and drawing need to march to the beat of
the same drum, but the animation system doesn't know
abgout the view system and vice-versa so neither one
can drive the other.
We introduce the Choreographer as a drummer to keep
everyone in time and ensure a magnificent performance.
This patch enabled VSync based animations and drawing by
default. Two system properties are provided for testing
purposes to control the behavior.
"debug.choreographer.vsync": Enables vsync based animation
timing. Defaults to true. When false, animations are
timed by posting delayed messages to a message queue in
the same way they used to be before this patch.
"debug.choreographer.animdraw": Enables the use of the animation
timer to drive drawing such that drawing is synchronized with
animations (in other words, with vsync or the timing loop).
Defaults to true. When false, layout traversals and drawing
are posted to the message queue for execution without any delay or
synchronization in the same way they used to be before this patch.
Stubbed out part of the layoutlib animation code because it
depends on the old timing loop (opened bug 5712395)
Change-Id: I186d9518648e89bc3e809e393e9a9148bbbecc4d
Make surface management between SurfaceView and the window manager
much more controlled, to ensure that SurfaceView always gets to report
the current surface is destroyed before the window manager actually
destroys it.
Also a small tweak to allow windows that have a wallpaper background
to still have a preview window. This makes launching home after it
has been killed feel much more responsive.
Change-Id: I0d22cf178a499601a770cb1dbadef7487e392d85
This fixes the build on Linux when RefBase is compiled with reference tracking
enabled.
Change-Id: I3e931e0b463ce836f6fdb30c37068d77144631a3
Signed-off-by: Iliyan Malchev <malchev@google.com>
It is no longer sufficient to check the value of
internal.R.bool.config_showNavigationBar to determine if a
navigation bar (separate from the status bar) is shown on a
device, because the emulator needs to be able to override
this value (now possible by setting qemu.hw.mainkeys to "1"
or "0", for navbar or no navbar, respectively).
This logic is now contained in PhoneWindowManager, and any
clients wishing to know whether the system has a software
nav bar should consult the new hasNavigationBar() method.
Bug: 5404945
Change-Id: I119d32a8c84b88b2ef46f63244e7f11dc5de0359
This adds a --preferred-configurations flag that specifies the
specific configurations you would like to have.
It is smarter than "-c" because it will avoid stripping a
configuration if that would result in there being no value
for the resource.
It is dumber than "-c" because it can't process as many kinds
of resources. It is really only intended for bitmaps and use
with density configs.
This required re-arranging AaptAssets to group files together
by config again, like they used to be. I think this hasn't
broken anything. Hopefully.
Change-Id: I4e9d12ff6e6dbd1abb8fd4cb1814c6674b19d0e5
Bug: 5332296
Ensure that there is always an owner for each CursorWindow
and that references to each window are acquired/released
appropriately at all times.
Added synchronization to CursorToBulkCursorAdaptor to
prevent the underlying Cursor and CursorWindow from being
remotely accessed in ways that might violate invariants,
resulting in leaks or other problems.
Ensured that CursorToBulkCursorAdaptor promptly releases
its references to the Cursor and CursorWindow when closed
so they don't stick around longer than they should, even
if the remote end hangs onto the IBulkCursor for some reason.
CursorWindow respects Parcelable.FLAG_WRITE_RETURN_VALUE
as an indication that one reference to the CursorWindow is
being released. Correspondingly, CursorToBulkCursorAdaptor
acquires a reference to the CursorWindow before returning
it to the caller. This change also prevents races from
resulting in the transfer of an invalid CursorWindow over
the wire.
Ensured that BulkCursorToCursorAdaptor promptly releases
its reference to the IBulkCursor when closed and throws
on attempts to access the cursor while closed.
Modified ContentProviderNative to handle both parts of
the wrapping and unwrapping of Cursors into IBulkCursors.
This makes it a lot easier to ensure that the right
things happen on both ends. Also, it turns out that
the only caller of IContentProvider.bulkQuery was
ContentProviderNative itself so there was no need
to support bulkQuery on ContentProviderProxy and it was
just getting in the way.
Implement CloseGuard on CursorWindow.
Change-Id: Ib3c8305d3cc62322f38a06698d404a2989bb6ef9
This cleans up how ui flags are managed between the client and window manager.
It still reports the global UI mode state to the callback, but we now only clear
certain flags when the system goes out of a state (currently this just means the
hide nav bar mode), and don't corrupt other flags in the application when the
global state changes.
Also introduces a sequence number between the app and window manager, to avoid
using bad old data coming from the app during these transitions.
Change-Id: I40bbd12d9b7b69fc0ff1c7dc0cb58a933d4dfb23
Also parse fallback_fonts.
This lets layoutlib automatically use the same fonts as the base
platforms, for instance it now uses the new ICS fonts.
Change-Id: Id6e778dc0e3f2a9112601e0eaf8499a9713ec433
This include a fix in layoutlib_create to properly handle
delegating a static method of an inner class (was broken and
only worked on non static method).
Added a few comments here and there to *_Accessor classes so
that it's a bit more obvious what they are for and how they are
used.
Change-Id: Ifc31dd1a006393bb0c08e22b6a17f500dd62e090
Localized strings with product variants were not being included in the APK,
apparently because the check to ensure that a different variation of the
string had not already been included in the APK was matching the version
of it from the default, untranslated configuration.
Now check to make sure that the string not only exists but also exists in
the correct configuration.
Bug 5372711
Change-Id: I52975570b75e0f11827dc6bcf1cb4a987d0541aa
