The APIs for checking whether keys are held down now also look
at virtual keys.
However it turns out there is less than a second between the time we
start the input thread and check for safe mode, so there is not enough
time to actually open all of the devices and get the data from them
about the finger being down to determine if a virtual key is down.
So now you can also hold DPAD center, trackball center, or s to
enter safe mode. Also give some vibrator feedback.
Change-Id: I55edce63bc0c375813bd3751766b8070beeb0153
Merge commit '5fbbdf2a21e5d41a3eaaa7122f4a46d30f81f7f7' into eclair-plus-aosp
* commit '5fbbdf2a21e5d41a3eaaa7122f4a46d30f81f7f7':
Don't forget to clear "backup in progress" state when finishing a pass
If a backup pass had been skipped (either because the transport was unavailable
or -- in a common case! -- because there was simply no work pending when the
periodic backup check fired), we were forgetting to reset the "backup currently
in progress" flag. Once we'd done that, the device would *NEVER* perform a
backup until it was rebooted, since it would forever think that there was one
currently in operation that must not be interfered with.
Change-Id: I0d6d7375dc6de99b599222a449934e70fe13ebb9
Merge commit 'ac939d086c42afeaef0982cee0e5861184dd82eb' into eclair-plus-aosp
* commit 'ac939d086c42afeaef0982cee0e5861184dd82eb':
Fix issue #2148939: Sholes slow to wake up in landscape mode
This was introduced when I did the fading of the lock screen,
which relies on setting the policy visibility of the windows behind
it to be hidden. As a result, when the orientation changed or
the activity was restarted, they wouldn't be resized or reported
as drawn, and the activity manager would wait until its timeout
before unfreezing the screen.
We now have a new method on WindowState to find out if a window
has drawn itself, which is used in the appropriate places.
Change-Id: If05f8b1947d3029917f62ad0f89b43544bd0a4dc
Also trigger low battery when battery reaches the specified level
rather than when it drops below the level.
Fixes bug b/1788656
Change-Id: I81f5cbb9892fc6574320d92e153211f83c69f415
Signed-off-by: Mike Lockwood <lockwood@android.com>
Merge commit '093f581090d8cf98f5877746d924107f7695dd8b' into eclair-plus-aosp
* commit '093f581090d8cf98f5877746d924107f7695dd8b':
The touch screen is probably a feature.
Merge commit '6ecaff15836581336b1e8fad6ac42f3ff4a13544' into eclair-plus-aosp
* commit '6ecaff15836581336b1e8fad6ac42f3ff4a13544':
add a optional String to the key of notifications to allow users
The TelephonyRegistry service crashed badly in the generic build, because
there is no system property to tell if the phone is GSM or CDMA. Adding a
simple null check solves the issue and allows the system to boot properly.
Merge commit '896b15abea4e1c0ee98330964474672a7316ee50' into eclair-plus-aosp
* commit '896b15abea4e1c0ee98330964474672a7316ee50':
A variety of work on animations.
- The lock screen now fades in and out.
- Fixed a bug where we would accidentally freeze the screen when switching
to an activity with a different orientation than the current (but
the screen itself is in the current orientation). This would mess up
the animations on the car dock.
- New API to force a particular animation for an activity transition
(untested).
- New wallpaper animations.
- Resources now uses the next API version when in a development build,
to help applications being developed against such builds.
Change-Id: I2d9998f8400967ff09a04d693dc4ce55f0dbef5b
* changes:
Fix bug 2129190 The context used by the status bar (i.e., the system context) was not properly initialized to have the right ApplicationInfo inside its PackageInfo. This eventually caused it to believe that it was running at 160dpi.
The context used by the status bar (i.e., the system context) was
not properly initialized to have the right ApplicationInfo inside
its PackageInfo. This eventually caused it to believe that it
was running at 160dpi.
Kudos to Dianne for figuring this out.
* We now check for in-progress backups when asked to perform one, and don't
bother firing off another one concurrently (nor do we adjust the scheduling;
after all, someone asked to do a backup "now" and we're doing one, so we are
in line with expectations). We also defer backup passes while a restore is
in flight, and abort attempts to perform a restore during a backup pass.
* When a backup attempt fails, we now ask the transport how far in the future we
should put our retry. Previously we were simply not bothering to consult with
the transport, so we would wind up retrying backup while network connectivity
was known to be down, etc.
Change-Id: Ic7758010b74e06e90c50d46b7b0dd01b17af7c90
Merge commit '4cc86e1ae80eb1938500fe5fa06bbdf8b4b7b50d' into eclair-plus-aosp
* commit '4cc86e1ae80eb1938500fe5fa06bbdf8b4b7b50d':
Clear the device's data from the transport when backup is disabled
Turning off backup in the Settings UI constitutes an opt-out of the whole
mechanism. For privacy reasons we instruct the backend to wipe all of the data
belonging to this device when the user does this. If the attempt fails it is
rescheduled in the future based on the transport's requestBackupTime()
suggestion. If network connectivity changes prompt the transport to indicate a
backup pass is appropriate "now," any pending init operation is processed before
the backup schedule is resumed.
The broadcasts used internally to the backup manager are now fully protected;
third party apps can neither send nor receive them.
(Also a minor logging change; don't log 'appropriate' EOF encountered during
parsing of a backup data stream.)
Merge commit 'ffa424800d0338b8b894aef2ea1e3e3344cbda7a' into eclair-plus-aosp
* commit 'ffa424800d0338b8b894aef2ea1e3e3344cbda7a':
Fix issue #2133206: dialogs/menus should auto-dismiss when screen turns off
Lot of infrastructure for more things to go away when "clear system dialogs"
happens, and now do this when we turn on the lock screen.
Change-Id: I567130296fe47ce82df065ed58ef21b37416ceaf
Merge commit 'c413d54cd9283778e6d73965a1d1d5f63ba62ec3' into eclair-plus-aosp
* commit 'c413d54cd9283778e6d73965a1d1d5f63ba62ec3':
Fix bug where onStartCommand() was never called with a null intent.
Merge commit '7c47adefea3101876f747926e7631406b4fbf45e' into eclair-plus-aosp
* commit '7c47adefea3101876f747926e7631406b4fbf45e':
Dock screen on config can now select AC or USB.
Merge commit 'b03b3bbd6833f7c6fbd8100fa3958220554f66a3' into eclair-plus-aosp
* commit 'b03b3bbd6833f7c6fbd8100fa3958220554f66a3':
If backup fails, reenqueue all of the affected packages for next time.
Merge commit '9bfb707597898f54722460b48588007b682f3e2a' into eclair-plus-aosp
* commit '9bfb707597898f54722460b48588007b682f3e2a':
Various fixes and improvements to window, activity.
- New meta-data you can add to a dock activity to have it launched by the
home key when the device is in that dock.
- Fix a deadlock involving ActivityThread's internal content provider lock.
- New window flag to have a non-secure keyguard entirely dismissed when a
window is displayed.
- New WindowManagerPolicy APIs to allow the policy to tell the system when
a change it makes during layout may cause the wall paper or
overall configuration to change.
- Fix a bug where an application token removed while one of its windows is
animating could cause the animating window to get stuck on screen.
Change-Id: I6d33fd39edd796bb9bdfd9dd7e077b84ca62ea08
Merge commit '6c644f248f553898248b8a6948fac4d62874fedd' into eclair-plus-aosp
* commit '6c644f248f553898248b8a6948fac4d62874fedd':
Add parameter for the restore set (device id) data is being restored from to the restore_start event
Merge commit '94db928d8cf5a69e8c2907fc33a6d656045f263d' into eclair-plus-aosp
* commit '94db928d8cf5a69e8c2907fc33a6d656045f263d':
PowerManager: Require proximity sensor value be less than Sensor.getMaximumRange()
This allows us to support binary proximity sensors that only return 0.0 and 1.0
Change-Id: Ifaf3a4e6fc720cb246ac3558e3e733b4b612c95b
Signed-off-by: Mike Lockwood <lockwood@android.com>
Merge commit '9bbd5ee49f4a26b87273c40a955557e63f10da3b' into eclair-plus-aosp
* commit '9bbd5ee49f4a26b87273c40a955557e63f10da3b':
Make IBackupTransport.finishBackup() also return an int code, since it too can
