Add DNS and gateway as parameters to RIL_REQUEST_SETUP_DATA_CALL so that
system properties aren't used for passing these to the ril. System
properties that are read right after a write doesn't always see the
result of the write. Another words writing system properties are not
not sequentially consistent.
Bug: 3364487
Change-Id: Ib7cba74346395323f3feb927281695663d9935ac
There are separate settings for AUTO_TIME and AUTO_TIME_ZONE.
Modify *ServiceStateTracker to monitor AUTO_TIME and AUTO_TIME_ZONE changes
separately and reset NITZ time and timezone accordingly.
bug: 3304255
Change-Id: Ie430f7b4a256618bea87672b3628d1223ea6e36a
We were sending a notification before setting mIsMinInfoReady and
mCurrentOtasp. This causes a race and it's possible that
OtaUtils.maybeDoOtasp is called before before they are set.
In this case the activation would not occur.
Bug: 3339109
Change-Id: I3baf8992d58af63a5cc07a14cc33157fd1c5aaa3
Use matching feature type when turning tethering off or the request is ignored.
Also, turn on DUN apn right away so that we don't fail aggressive test cases.
Also don't report connections for enabled apn's that we're no longer connected to.
bug:3332880
bug:3338033
Change-Id: I7db2dfd4879f03465bc9f6d39488c078570dcaf3
When roaming the plmn might be blank but we want to have
showPlmn true otherwise "No Service" is displayed.
bug: 3265611
Change-Id: Iaed8997ab0bb336c79cef1fc848526ca7a73f9a1
The purpose of these properties is to allow, at boot time, the
enable and disabling of receiving and sending of SMS messages.
These properties are used to initialize two booleans within
[Gsm|Cdma]SMSDispatcher code. The two booleans are initialized
to the value of config_sms_capable and when config_sms_capable
is false the device can neither receive nor send SMS.
Under some conditions, such as testing, it could be desirable
to send and or receive SMS messages on a device where config_sms_capable
is false. With the addition of these two properties it is now possible
to use /data/local.prop to control the booleans independently.
bug: 3315489
Change-Id: I83fe6f2da7d66ff720f28b696d8d76ec388706c0
A bit of a hack so that first trySetupData call uses the proper APN in
strange edge cases. Made a new startUsingNetworkFeature string
that ConnectivityService knows means always pass the request to telephony
even if telephony connections are not currently available.
bug:3133178
Change-Id: I2559b9cbaed4b4ec02bdf7ea78e6003ee2be64f2
Change I1a1adc61 added a new parameter to setupDataCall,
but updated the callers incorrectly (specifying the
arguments in the wrong order). Fix the order.
Change-Id: I0e762de29ac05d387371a7cfe33a33ad16219221
setupDataCallWithProtocol was introduced to introduce a
protocol parameter to setupDataCall without having to
modify its callers. This is not very useful, as there are
only two callers. Get rid of it and make setupDataCall take
the protocol parameter itself.
For now, hardcode IPv4 connectivity. When we add the
protocol field to ApnSettings, it will be fetched from
there.
Change-Id: I1a1adc616ffd9ac68be6911f054790da48e472d6
The wakelock will be kept held if there is outstanding requests
in request list. When WAKE_LOCK_TIMEOUT occurs, all requests
in mRequestList already waited at least DEFAULT_WAKE_LOCK_TIMEOUT
but no response. Those lost requests return GENERIC_FAILURE and
request list is cleared.
bug:3292426
Change-Id: I369c6ba4d6836d65ef616140e48c7304faf888f0
Rewrote interceptKeyBeforeQueueing to make the handling more systematic.
Behavior should be identical except:
- We never pass keys to applications when the screen is off and the keyguard
is not showing (the proximity sensor turned off the screen).
Previously we passed all non-wake keys through in this case which
caused a bug on Crespo where the screen would come back on if a soft key
was held at the time of power off because the resulting key up event
would sneak in just before the keyguard was shown. It would then be
passed through to the dispatcher which would poke user activity and
wake up the screen.
- We propagate the key flags when broadcasting media keys which
ensures that recipients can tell when the key is canceled.
- We ignore endcall or power if canceled (shouldn't happen anyways).
Changed the input dispatcher to not poke user activity for canceled
events since they are synthetic and should not wake the device.
Changed the lock screen so that it does not poke the wake lock when the
grab handle is released. This fixes a bug where the screen would come
back on immediately if the power went off while the user was holding
one of the grab handles because the sliding tab would receive an up
event after screen turned off and release the grab handles.
Bug: 3144874
Change-Id: Iebb91e10592b4ef2de4b1dd3a2e1e4254aacb697
Korean phones write to the ADN record of the SIM in a non-standard way.
When UCS2 is not used, the alphaTag will be written in the KSC5601
encoding. This contribution adds support for reading that format when
a Korean SIM card is used.
Also adds support for KSC5601 in SMS.
Change-Id: I81a4a6949359b4d23a937ac2d813bafed2b85ff6
If device doesn't support sms service, SMSDispatcher
will ignore incoming SMS in dispatching messge and return
ERROR_NO_SERVICE in sending sms messgae.
bug: 3250029
bug: 3038102
Change-Id: Ic72a9192aa128c43cf31da04907620bc680656c6
Removed ACTIVATION_REJECT_GGSN and ACTIVATION_REJECT_UNSPECIFIED from
DataConnection#isPermanentFail() so they won't be detected as permanent.
bug: 3070773
Change-Id: I18d10bc44609e550d7932cd9600116f074bcb8dd
- Check for active phone in ICC handler before processing messages.
- Boundary check for gsm/cdma subscription app index
while retrieving the ICC Card App.
Change-Id: I3d54447e8d48e3482763e78eeb2a737a34cec321
Android telephony does not release the partial wakelock right away if
there is an error in sending the RIL request. The wake lock is released
only after EVENT_WAKE_LOCK_TIMEOUT occurs that prevents the phone to go
in power collpase. The change is to release the wake lock as soon as the
error in send is detected.
Also, change RIL#send not not send a request if there is no connection to
vendor RIL, as the request will always fail.
Change-Id: Ia39a4b9ac12f4064e301a65abfd26409d49babe1
It's possible for an application to dial an emergency
number by appending extra digits to the phone number.
For example, one could dial "9111" instead of "911",
and a strict .equals wouldn't detect this as an emergency
number.
Replace .equals() with .startsWith()
Change-Id: I87f34fc2b9bbee2c4fa6be511bcc3b955559e0a9
Added CMD_SET_DATA_ENABLE which is sent when data is enabled/disabled
via the ConnectivityService. It is anticipated that the communication
channel will be used for additional commands and to receive unsoliciated
commands from DataConnectionTracker back to MobileDataStateTracker.
Change-Id: I3863e7385155d503f069b1dcb7e4f766ec78b5f8
For bug 2667143.
Integrated Digital Enhanced Network (iDEN) is a mobile telecommunications
technology which provides its users the benefits of a trunked radio and
a cellular telephone.
Change-Id: I4a1f5dbdd22a2c4ce5252688053ec4a47805d6b9
For bug 3038102.
Non-voice capable means that this device doesn't support circuit-switched
phone calls over the telephony network. It blocks the new ringing
notification at PhoneBase level.
Change-Id: Ibef28dadae222c7ad169ee59e5c11a2c93e60e93
