Some of the native calls were left unsynchronized in the framework. Pre-empted IOCTL call
interrupted by another call from the framework cannot be handled in the driver.
Bug: 2310455
Merge commit '9d3cb9bfc6d7a5f340d2dd8132b201b933687564' into eclair-mr2
* commit '9d3cb9bfc6d7a5f340d2dd8132b201b933687564':
Fix updating Bluetooth icon on status bar and for Wifi.
Status bar uses the SINK_STATE_CHANGE intent to determine the icon.
This intent also has the device. Thus, we can get this intent for any
device and we update the icon wrongly. The same problem is with Wifi.
This was not commonly observed till now, but with the car dock changes
its easy to reproduce as we can get an incoming connection from the
car's bluetooth system. For Wifi, this will cause coexistance issues
especially with desk docks.
Dr No: Eastham
Bug: 2133530
The driver can now report to us that they are hosed and we'll shut
down wifi and restart it - only to be used as a last resort.
Also fixing synch problem with updateWifiState.
bug: 2173119
Merge commit '16cb04ab1cd88d917fdd34a9063fe4a9707aa5b1' into eclair-mr2
* commit '16cb04ab1cd88d917fdd34a9063fe4a9707aa5b1':
Add a little logging to diagnose wifi cycle bug
+ push the double-quote handling down to framework.
wpa_supplicant keeps the ssid in a quoted string in the config file. However,
the UI currently needs to handle the quoted string which makes it difficult
to handle the SSID containing the quotes. The change will move the
supplicant-specific double-quote handling from UI to framework, i.e. to
add/remove doubel-quotes in framework instead of in UI settings.
We already had a delay if we were associated, but we have some race conditions
we think will be masked if we delay the driver stop for the other cases
too. Don't wait as long (2 min instead of 15).
bug: 2147260
The process for starting wifi was using a wakelock around a message-pass and this was causing
an exception for meer mortals (who don't have WAKE_LOCK permission).
bug: 1750535
The supplicant can take up to 15 seconds to start - setting the number of wifi channels
immediately after requested wifi start often will fail.
Changed to set the number of channels when the supplicant is reported as alive.
bug:2083601
This is a large batch, and covers:
-- Bluetooth Device Discovery --
BluetoothAdapter.ACTION_DISCOVERY_STARTED
BluetoothAdapter.ACTION_DISCOVERY_FINISHED
BluetoothAdapter.startDiscovery()
BluetoothAdapter.cancelDiscovery()
BluetoothAdapter.isDiscovering()
-- Bluetooth bonding (pairing) --
BluetoothAdapter.getBondedDevices()
BluetoothDevice.ACTION_BOND_STATE_CHANGED
BluetoothDevice.EXTRA_BOND_STATE
BluetoothDevice.EXTRA_PREVIOUS_BOND_STATE
BluetoothDevice.BOND_NONE
BluetoothDevice.BOND_BONDING
BluetoothDevice.BOND_BONDED
BluetoothDevice.getBondState()
BluetoothDevice.createBond()
BluetoothDevice.cancelBondProcess()
BluetoothDevice.removeBond()
-- BluetoothClass --
BluetoothDevice.ACTION_CLASS_CHANGED
BluetoothDevice.EXTRA_CLASS
BluetoothDevice.getBluetoothClass()
BluetoothClass.Service.*
BluetoothClass.Device.Major.*
BluetoothClass.Device.*
BluetoothClass.getDeviceClass()
BluetoothClass.getMajorDeviceClass()
BluetoothClass.hasService()
-- Misc BluetoothDevice --
BluetoothDevice.ACTION_ACL_CONNECTED
BluetoothDevice.ACTION_ACL_DISCONNECTED_REQUESTED
BluetoothDevice.ACTION_ACL_DISCONNECTED
BluetoothDevice.ACTION_DISCOVERED
BluetoothDevice.ACTION_NAME_CHANGED
BluetoothDevice.EXTRA_DEVICE
BluetoothDevice.EXTRA_NAME
BluetoothDevice.EXTRA_RSSI
-- Misc BluetoothAdapter --
BluetoothAdapter.ACTION_LOCAL_NAME_CHANGED
BluetoothAdapter.EXTRA_LOCAL_NAME
BluetoothAdapter.checkBluetoothAddress()
I deprecated BluetoothIntent and moved each intent into the class it relates
to.
Change-Id: I877b1280428ab46278b2bc25668bb44cda22dc36
If the new system settings value for AIRPLANE_MODE_TOGGLEABLE_RADIOS
contains RADIO_WIFI, then the user will be allowed to enable Wifi
while in airplane mode.
Turning on airplane mode will still disable Wifi, but the user will
be free to reenable it in the Settings app.
Signed-off-by: Mike Lockwood <lockwood@android.com>
Merge commit '356d4a14aa96cf52c16f7a4d381044ce28b01af3'
* commit '356d4a14aa96cf52c16f7a4d381044ce28b01af3':
Add the phase2 field for EAP WiFi configuration.
Apparently this code was not 100% correct, and now the Wifi driver is responsible
for setting the scan mode to active for hidden networks, so this is no longer needed.
Signed-off-by: Mike Lockwood <lockwood@android.com>
Merge commit '463aacfbd220c9ef2f6ed915d54092289fdac05b'
* commit '463aacfbd220c9ef2f6ed915d54092289fdac05b':
wifi: WifiManager.startScan() will now do passive scans by default.
Active scans will only happen if a hidden AP is in use, or if the new method
WifiManager.startScanActive() is called.
This fixes some audio playback problems with bluetooth A2DP.
Signed-off-by: Mike Lockwood <lockwood@android.com>
Merge commit 'fa6c7111fe58e09a92741c7655221c3629d3220e'
* commit 'fa6c7111fe58e09a92741c7655221c3629d3220e':
WifiService: use wifi association state to determine if we should suspend wifi instead of
1. the certtool.h is modified for avoiding the side effect,
for saving the configuration with wpa_supplicant.
2. put the loadLibrary back in CertTool.java
3. Fix incorrect JNI declarations.
Previously only the level was being updated, resulting in out of date values
being left in the cache.
Patch was provided by Motorola.
Signed-off-by: Mike Lockwood <lockwood@android.com>
Merge commit '19cd309f9eccdf8454dc6e5076013588b7a170a3'
* commit '19cd309f9eccdf8454dc6e5076013588b7a170a3':
Add the EAP related fields for WiFi configuration.
Merge commit '1e2e44e900cb9a25d548e27a20d65292a7f321bc'
* commit '1e2e44e900cb9a25d548e27a20d65292a7f321bc':
Fix wifi multicast API for public use.
Revert "Bug fixes and performance improvements"
That'll make it stop trying to interpret older records with the new format.
Also applied other comments involving name changes to remove un-needed 'Wifi' labels in WifiManager API, etc.
Put Wifi into an idle state immediately if the screen is turned off and the Wifi interface has no IP address.
We will continue to keep Wifi up for 15 minutes in the case where the screen is turned off when Wifi is fully connected.
This will allow us to go into a low power mode faster when Wifi is not actively being used.
It also avoids bringing up Wifi if the user just turns on the screen for a few seconds to check the clock, etc.
Fixes bug b/1736920
Signed-off-by: Mike Lockwood <lockwood@android.com>
Adds stats for:
- Number of raw user events that have happened in the system.
- Number of times user activity has been reported, dividied by UID and type of activity.
- Duration of screen brightness levels in 4 buckets.
- Per-UID tracking of who has turned on Wifi and how long we can attribute it being on because of them.
Original author: hackbod
Merged from: //branches/cupcake/...
Automated import of CL 143800
take place.
This has the same underlying cause as bug #1739874, so this fixes that
bug as well. The problem was that if the supplicant was in the DORMANT
state at the time a scan-only Wi-Fi lock was released, the command to
stop the Wi-Fi driver would never be issued. This had two main results:
first, the driver would stay awake when the screen was blank and it was
supposed to be sleeping, leading to excessive battery drain, and second,
when the screen was turned back on, there would be no DRIVER-STARTED
event generated (because the driver was already running). The
DRIVER-STARTED event is the trigger for the framework to issue a
RECONNECT command to the supplicant to cause it leave the DORMANT state
and look for available remembered networks.
To assist in tracking down this problem, and any such problems in the
future, I added four counters to keep track of how many times full and
scan-only Wi-Fi locks are acquired and released. The counter values
are output in the dump() method of WifiService. While doing this, I
noticed that because of missing "break" statements, the battery stats
that keep track of how much time Wi-Fi locks are held were including
the time for full locks in the time reported for scan-only locks.
Original author: ers
Merged from: //branches/cupcake/...
Automated import of CL 143266
