This makes transport controls a primitive interface on sessions with
a way to create the performer, register callbacks, and send commands
and updates between controllers and performers. This still needs some
cleanup but has been tested with OneMedia.
Change-Id: I373d35f7ccc383b8421bd14044457467d80425f3
When a doze component has been specified in a config.xml resource
overlay, the power manager will try to start a preconfigured dream
whenever it would have otherwise gone to sleep and turned the
screen off. The dream should render whatever it intends to show
then call startDozing() to tell the power manager to put the display
into a low power "doze" state and allow the application processor
to be suspended. The dream may wake up periodically using the
alarm manager or other features to update the contents of the display.
Added several new config.xml resources related to dreams and dozing.
In particular for dozing there are two new resources that pertain to
decoupling auto-suspend mode and interactive mode from the display
state. This is a requirement to enable the application processor
and other components to be suspended while dozing. Most devices
do not support these features today.
Consolidated the power manager's NAPPING and DREAMING states into one
to simplify the logic. The NAPPING state was mostly superfluous
and simply indicated that the power manager should attempt to start
a new dream. This state is now tracked in the mSandmanSummoned field.
Added a new DOZING state which is analoguous to DREAMING. The normal
state transition is now: AWAKE -> DREAMING -> DOZING -> ASLEEP.
The PowerManager.goToSleep() method now enters the DOZING state instead
of immediately going to sleep.
While in the doze state, the screen remains on. However, we actually
tell the rest of the system that the screen is off. This is somewhat
unfortunate but much of the system makes inappropriate assumptions
about what it means for the screen to be on or off. In particular,
screen on is usually taken to indicate an interactive state where
the user is present but that's not at all true for dozing (and is
only sometimes true while dreaming). We will probably need to add
some more precise externally visible states at some point.
The DozeHardware interface encapsulates a generic microcontroller
interface to allow a doze dream for off-loading rendering or other
functions while dozing. If the device possesses an MCU HAL for dozing
then it is exposed to the DreamService here.
Removed a number of catch blocks in DreamService that caught Throwable
and attempted to cause the dream to finish itself. We actually just
want to let the process crash. Cleanup will happen automatically if
needed. Catching these exceptions results in mysterious undefined
behavior and broken dreams.
Bug: 12494706
Change-Id: Ie78336b37dde7250d1ce65b3d367879e3bfb2b8b
This app creates a service and UI in separate processes and uses
the new MediaSession APIs. This is still a rough work in progress.
Change-Id: I9692c95bf2fdbee7255da86dff59044c893e3a1f
Demo mode is protected behind a system setting. To enable:
$ adb shell settings put global sysui_demo_allowed 1
Change-Id: I2248e27a253bf9eac176e8be9153a2b147cefa40
Move the projection surface to be a property of a DisplayList,
set to true for every background drawable.
Additionally, handle a projecting view background such that it doesn't
try to project onto itself (which is undesirable).
Change-Id: Ic70b17474bd87340e80767f8518f73b233419c7a
When an application wishes to do low-priority background work when the
device is otherwise idle (e.g. in a desk dock overnight), it declares
a service in its manifest that requires this permission:
android:permission="android.permission.BIND_IDLE_SERVICE
to launch, and which publishes this intent filter:
<intent-filter>
<action android:name="android.service.idle.IdleService" />
</intent-filter>
This string is declared in the API as IdleService.SERVICE_INTERFACE.
The service must be implemented by extending the new "IdleService"
class, which provides the API through which the system will communicate
with the app.
IdleService declares three methods, two of which are lifecycle callbacks
to the service, and the third of which is for the service itself to
invoke when appropriate. The lifecycle callbacks are
public abstract boolean onIdleStart();
public abstract void onIdleStop();
The first of these is a notification to the service that an idle
maintenance interval has begun. The service can then spin off
whatever non-UI work it wishes. When the interval is over, or if
the OS determines that idle services should be shut down immediately,
the onIdleStop() method will be invoked. The service must shut down
any background processing immediately when this method is called.
Both of these methods must return immediately. However, the OS
holds a wakelock on the application's behalf for the entire period
between the onIdleStart() and onIdleStop() callbacks. This means
that for system-arbitrated idle-time operation, the application does
not need to do any of its own wakelock management, and does not need
to hold any wakelock permissions.
The third method in IdleService is
public final void finishIdle();
Calling this method notifies the OS that the application has finished
whatever idle-time operation it needed to perform, and the OS is thus
free to release the wakelock and return to normal operation (or to
allow other apps to run their own idle services).
Currently the idle window granted to each idle service is ten minutes.
The OS is rather conservative about when these services are run; low
battery or any user activity will suppress them, and the OS will not
choose to run them particularly often.
Idle services are granted their execution windows in round-robin
fashion.
Bug 9680213
Change-Id: Idd6f35940c938c31b94aa4269a67870abf7125b6
IsContainedVolume -> hasIsolatedZVolume conveys that this affects Z
ordering of views
ProjectToContainedBackground -> ProjectBackwards, since it ended up
using its own projection target, separate from the 3d volume bit
Change-Id: Ia2cde838cc4da134366fe6ff623290fbd65e50c3
We need to specify "PBKDF2WithHmacSHA1And8bit" now in order to get precisely
the same output as was previously generated with "PBKDF2WithHmacSHA1". We
also now try both when it's ambiguous which was used to generate the archive
checksums.
Bug 12494407
Change-Id: I5443f31a5e13c24f44445768b6e9a6eea221ede6
For now, ancestor views signal the acceptance of projections with a
save(0x20)/restore pair.
During the order traversal, each view with the save(0x20) code will
collect descendent views with mProjectToContainedVolume (which still
needs to be renamed) so that they can be drawn out of order later.
- *Temporary* sample code added to HwAccelerationTest.
- Note that a projected displaylist must not be clipped.
Change-Id: I45c493e845961535b958d59c53e8aff3f8891d9f
Extend wifi display connection timeout.
Show a notification while connecting to wifi display.
Ensure that remote display providers are really trusted before
connecting to them.
Bug: 11257292
Change-Id: Iad0caaa30d7946df818bc75ade071f2e377f8a53
If a window claims to handle its own configuration change then we
won't destroy and recreate its window on a configuration change.
Normally that recreation triggers the first layout following
orientation change because mHaveFrame is false. Windows that handle
their own configuration changes never got a relayout pass following a
change in orientation.
This change passes the configuration changes that an application
handles into the AppWindowToken. If the app says it handles
orientation or screen size changes then a relayout will occur when the
configuration has changed.
Fixes bug 11647107.
Change-Id: Ie8d49fd050442ebbdcf0b805087894e3a2fc4be9
Hide disabled routes from the chooser.
Fix layout of chooser dialog when the settings button is visible and
the list is very long to prevent truncation of the settings button.
Fix an issue when we fake the route connecting status when a route
is selected. The route changed notification needs to be propagated
to apps. Fake it better.
Immediately disconnect from a route when the connection is lost or
a connection attempt fails. Added a few new test displays for this
case.
Bug: 11257292
Change-Id: I360ab5dc937ad60d97592eab54b19f034519645e
This change adds a new media router service whose purpose is to track
global state information associated with media routes. This service
publishes routes to the media router instance in application processes
and handles requested state changes such as selecting or unselecting
global routes. The service also binds to remote display provider
services which can offer new remote display routes to the system.
Includes a test application for manually verifying certain aspects
of the operation of the media router service.
The remote display provider interface is essentially a stripped down
media route provider interface as defined in the support library
media router implementation. For now, it is designed to be used only
by first parties to publish remote display routes to the system so
it is not exposed as public API in the SDK. In the future, the remote
display provider interface will most likely be deprecated and replaced
with a more featureful media route provider interface for third
party integration, similar to what is in the support library today.
Further patch sets integrate these new capabilities into the System UI
and Settings for connecting remote displays.
Bug: 11257292
Change-Id: I31109f23f17b474d17534d0f5f4503e388b081c2
Change to add "throws IOException" to android.media.MediaCodec
(createByCodecName|createDecoderByType|createEncoderByType). The exception was
previously thrown through the native JNI, but not explicitly declared.
Requires changes to existing code for declaration compatibility.
Bug: 11364276
Change-Id: Ia0d3481397285cb1503bedde37d4651934b3a481
Signed-off-by: Andy Hung <hunga@google.com>
* commit '09de7975fead1b47ea78f6f812a2f649e5dfb31d':
SmartCamera: Fix to build against latest camera2 api
Camera2Tests: update SmartCamera for async api
Camera2Tests: Add SmartCamera App
This test depends on internals of the old WebView to work which have
already been removed. It doesn't appear to be testing anything useful.
Bug: 10427705
Change-Id: I5e93b212c33f22776050b6e1ec639e23f41a1d4a
