Watches for package changes so it can dynamically adjust
to reflect the actual list of available activities.
Change-Id: I3a2fef3dac4d13d1b2a7ed6fc117a7b814679669
My previous change to speed up the time the IME is dismissed was
fundamentally flawed. That change basically switched the order
the application called the input method manager service from doing
startInput() and then windowGainedFocus(), to first windowGainedFocus()
and then startInput().
The problem is that the service relies on startInput() being done
first, since this is the mechanism to set up the new input focus,
and windowGainedFocus() is just updating the IME visibility state
after that is done. However, by doing the startInput() first, that
means in the case where we are going to hide the IME we must first
wait for the IME to re-initialize editing on whatever input has
focus in the new window.
To address this, the change here tries to find a half-way point
between the two. We now do startInput() after windowGainedFocus()
only when this will result in the window being hidden.
It is not as easy as that, though, because these are calls on to
the system service from the application. So being able to do that
meant a fair amount of re-arranging of this part of the protocol
with the service. Now windowGainedFocus() is called with all of
the information also needed for startInput(), and takes care of
performing both operations. The client-side code is correspondingly
rearranged so that the guts of it where startInput() is called can
instead call the windowGainedFocus() entry if appropriate.
So... in theory this is safer than the previous change, since it
should not be impacting the behavior as much. In practice, however,
we are touching and re-arranging a lot more code, and "should" is
not a promise.
Change-Id: Icb58bef75ef4bf9979f3e2ba88cea20db2e2c3fb
Remove the right-to-left cascade effect from action mode menu
items. Animation time is now fixed at 300ms for scaling in menu items.
Change-Id: I8eef2ed9f93c2af804663dd5e6b3f4915ed45cb1
Fix 5783857: Device Policy Manager doesn't allow Face Unlock
This makes it so that if face unlock is enabled and then a device policy
manager that requires something more secure than face unlock is installed,
the user will be forced to choose a new acceptable lock type.
This was previously fixed for the case where the device had been reset, or
the shell was restarted after setting face unlock, but not for the case where the
device remained on between setting face unlock and setting up a device policy
manager.
Also changed the function ordering of saveLockPattern() so that the overloaded
wrapper function is next to the main function.
Change-Id: Ibed8c4ab137ebbc07fb143faef6f047bc6dc4474
This adds a feature to delay locking the device when the power button
is pressed. This fixes a use case where the user wants to turn off
the display (e.g. to save power) but doesn't want to lock the device.
For the case of a secure device (user has a pin/password/pattern),
this will lock the device immediately or not based on the setting.
For the non-secure case, this always "locks" the device to provide easy
access to the camera while preventing unwanted input.
Change-Id: Ie328485c3f7559e26896d761cbf0e69d3f4df4e2
Reduce likelihood of crash when state machine has quit and someone
sends a message using one of the public functions.
Bug: 5724844
Change-Id: I6582a1d19113e6ed545c8ab20adb0a414d8784a7
When the battery stats buffer hits 128KB, it hits a code path
that causes an NPE. This can happen depending on usage and charging
patterns and manifest in bad ways, such as failure to boot up
or random crashes, or refusing to go to sleep.
Bug: 5645407
Change-Id: I21d5d189431f776f25bcb7d598c86e598ad8cb17
This updated tablet layouts to support showing album art and transport
control views in PIN, pattern and password screens of lock screen.
It also allows the addition of a background protect asset and
the ability to show the system wallpaper on layouts that define a
transport_bg_protect view.
Also updated layout to use new ICS-style buttons on lock screen and
fixed bug with "forgot pattern" button where we were showing the
emergency call icon.
To avoid problems with leading ones in the mono-space clock font,
we now right-justify status text on tablet and remove the AM/PM
indicator.
Status font size adjusted by UX.
Added background protection drop shadow to transport control.
Fixed portrait mode to be right-justified when transport is showing.
Change-Id: I790292fc39f4588f87adc9d9241706817ae6baab
Some carriers cannot process emergency calls when the IMSI is not available,
which happens when the SIM is locked. This allows the behavior to be overwritten
in an overlay. When the config variable is set to 'false', the emergency
button no longer appears on the SIM or PUK unlock screens.
Change-Id: I3127bfd5e7ebfabea997fbe048cc474e48b7a81c
Once a backup lock has been chosen, it sends an intent to show a
congratulations screen. The moveTempGallery function has been moved
inside this new activity so it is no longer needed in LockPatternUtils.
Change-Id: I66868e6e3391b8b740f618fe633047ce388f55ca
Moved away from BufferedReader, which only reads the first 8KB of
some proc files because it aggresively fills its buffer. Optimized
proc parsing, now double the speed. Tests to cover.
Log when NetworkStats counters roll backwards when subtracting, and
optimizations around findIndex(). When system removes UID, also
remove from last stats snapshot to avoid xt counters from rolling
backwards.
Bug: 5472949, 5458380
Change-Id: I07c08fe5233156fac2b84450f6291868bf9bfaf2
Set a wider minimum width for the action button style on -sw600dp.
Fix an annoying bug where recycled ActionMenuItemViews would retain a
lingering pressed state, causing an unrelated button to glow briefly.
The home/up affordance should not be focusable when it is disabled.
Change-Id: Ia68f3d09f5d977f50e4e33c354d8133367187973
1. Added handling for hover events that are transformed into
touch events and given to the touch event handling code
if accessibility is enabled.
2. Now swiping across the handle unlocks the device for both
cases - accessibility enabled or disabled.
bug:5513324
Change-Id: I7031690d69b1a2737e2ce4d1871d69d7dfbf3006
- Part of fix 5491362 (RelTeamHotIssue)
- Because the fix closes the camera early, this change is needed so
the black area isn't still hanging around while the camera fades
to the backup lock.
Change-Id: Iab7c264adab0fb05979fe2732048ccf2237e64c5
This fixes a crash where we weren't hiding the view when there's
no registered media player. It now hides the view when AudioManager
tells it to clear the data.
It also avoids a possible race condition where a request can
come in from AudioManager before the callback is set.
Change-Id: I3360e775c75396e1eee11413d317df5b39ceb487
- Fix ordering problem in sync manager that would cause its wake
locks to slightly appear in the system process when they should
be fully accounted against the app.
- Allow the system process to have more wake lock names in its
battery stats.
- In the bug report output, print totals of the wake locks for each
process, to make it easier to parse what is being printed for things
like the system process with a huge number of individual wake locks.
Change-Id: I3cf39330f22f3c51c11e65e4124150d73a7da2dd
This works around a file descriptor leak in Skia. It also improves
view creation time by avoiding re-loading the font every time a
DigitalClock is created.
Change-Id: I5c46445da36b1e6ba06c8ca340e436835d281180
Previously, the code was not unregistering the callback when we unlocked
the device, which kept a reference to LockPatternKeyguardView indirectly
by a reference to mFaceLockCallback.
It now correcly removes the callback when we unlock the device.
Change-Id: Ie592d007a1dfc2416b9e8956aba2c34e3d0120ee
- after 15 failed face unlock attempts, go to backup until the backup method is successful
- if the backup method times out (because too many unsuccessful unlocking attempts),
face unlock will not be launched until the backup method is used sucessfully
- fixes 5365919
Change-Id: I9aef7a4f1abcceefc5d6f1c0458ae5cbe8a902df
This changes TransportControlView to be "sticky" on lockscreen. Basically, once it
appears on lockscreen, it stays there until unlocked and then locked again in paused state.
Tested basic design goals (using Music2):
- play then lock -> shows
- pause then lock -> not shown
- toggle pause to play while locked and not shown -> shows
- pause after played once while locked -> stays until we unlock and lock again while paused
- remote control play while paused & sleeping -> resume lockscreen -> shows
Also tested:
- configuration changes (orientation) to ensure widget continues to show after it once appears
- remote events while lock screen on -> keeps lockscreen on.
- remote events while sleeping -> doesn't wake.
Change-Id: I23418c5f7dfd1457c0844d2683772e8a3ed0abd1
When a RemoteControlClient reports an error for its playstate,
make the play/pause button display the warning platform icon.
Note that a specific image description is not available for this
state at this time, but the one being used (the same as for the
play icon) is valid as it correctly describes the action the
button performs.
Change-Id: I59aadab3fe5bcc09a2f7be0b9e4cffb0c500e865
