Add new RIL commands and generic code cleanups.
The only changes required for OMA DM support are the
addition of five new methods in ITelephony.aidl for
reading/writing NV items and performing NV config and
radio resets (requires MODIFY_PHONE_STATE), along with
the new RIL request IDs in RILConstants.java.
Bug: 12864208
Change-Id: I958d2571580d98a49936ef2e6822e5ac086acbe2
Expose the folowing commands in ITelephony.aidl and TelephonyManager:
- iccOpenLogicalChannel
- iccCloseLogicalChannel
- iccTransmitApduLogicalChannel
Also add a new SIM_COMMUNICATION permission (maked as dangerous) to control
access to the above commands.
Change-Id: I89c08adc6f9738907e3b547c749f3cc61f300710
These are APIs for the new ThirdPartyPhone feature.
Note, these APIs can't actually be used yet on master for two reasons:
- initiating a call from a 3rd party app isn't possible yet because
the TelephonyManager APIs aren't being added to master.
- the TeleService implementation of these APIs aren't being added to
master.
Also, these APIs will be removed and the final ones will be added
once they're ready to be merged into master.
Change-Id: Ie783290451da448a011f813983e55b12047b5d99
Add supplyPinReportResult & supplyPukReportResult that
returns the result code and attempts remaining.
Display "Attempts remaining" in Keyguard
Bug: 9928717
Change-Id: Ibad0635dd1375fabce11ba2b7b9f95f8868489e6
Fix CountryDetector NPE by calling CallerInfo.getCurrentCountryIso() which
checks for potential nulls.
Bug:11291034
Change-Id: I0a4412c432551c64ec30652d69636442653ee337
Add RIL_REQUEST_IMS_REGISTRATION_STATE, RIL_REQUEST_IMS_SEND_SMS, and
RIL_UNSOL_RESPONSE_IMS_NETWORK_STATE_CHANGED. Add FORMAT_UNKNOWN to
SmsConstants.
Bug: 9626411
Change-Id: I87ca9841b4ace931c55e2d379fe6d7589b2dc8a5
Signed-off-by: Ed Tam <etam@google.com>
Internal method CallerInfo.getCurrentCountryIso() can throw NPE
if the country detector's detectCountry() method returns null.
Add code to check that the Country is not null before calling
getCountryIso() on it. Change fallback logic to call
locale.getCountry() whenever countryIso was not assigned.
Bug: 10607906
Change-Id: I08fe3f4d942f67c37a2e6ff0b067fe32ad8a6fa5
When a sim is new or it has expired it needs to be provisioned
with the carrier. Basically provisioning is associating a sim with
a user account. When a sim isn't provisioned then operators will
restrict access to the network and only allow certain addresses
or services to be used.
This set of changes allows two types of provisioning networks to be
recognized. The first is a network that causes all DNS lookups to be
redirected to a different address than was intended. This is exemplified
by how T-Mobile works.
The second technique uses a special apn for provisioning. An example is
AT&T where lwaactivate is the provisioning apn and broadband is the
normal apn. We first try broadband and if we are unable to connect we
try lwaactivate. When we see the activate we identify it as special and
the ApnContext.isProvisioningApn will return true.
In the future our plan is to create a new network type that can be added
to the apn list, but for now it identified by name.
Here is a list of significant changes:
- CaptivePortalTracker now only test WiFi networks instead of all networks
- checkMobileProvisioning checks for provisioning networks and doesn't
try to ping.
- IConnectivityManager.aidl changes:
* getProvisioningOrActiveNetworkInfo was added to and used by Manage
mobile plan in WirelessSettings so even when there is no active
network it will still allow provisioning. Otherwise it would report
no internet connection.
* setSignInErrorNotificationVisible is used by both
CaptiviePortalTracker and checkMobileProvisioning so they use the
same code for the notifications.
* checkMobileProvisioning was simplified to have only a timeout as
returning the result is now harder as we abort simultaneous call
otherwise we'd could get into loops because we now check every time
we connect to mobile.
- Enhanced MDST to handle the provisioning network.
- Added CONNECTED_TO_PROVISIONING_NETWORK to NetworkInfo to make a new
state so we don't announce to the world we're connected.
- TelephonyIntents.ACTION_DATA_CONNECTION_CONNECTED_TO_PROVISIONING_APN
is sent by the low level data connection code to notify Connectivity
Service that a provisioning apn has connected. This allows CS to
handle the connection differently than a normal connection.
Bug: 10328264
Change-Id: I3925004011bb1243793c4c1b963d923dc2b00cb5
Add a network type for establishing connections to the apn used for
the initial connection.
Enable some debug for now.
Bug: 8733613
Change-Id: Ia627ac0cf5715660b6d02bb13a83d46ec1727b87
Add an intent to invoke a native carrier setup app. This is paired
with the INVOKE_CARRIER_SETUP permission, though it is up to the app
to enforce that callers hold this permission.
Change-Id: I317a40675de7e9587de23c028459be2331a2f8a2
Change call log so instead of overloading the phone number with special
strings "-1", "-2", etc to denote private phone numbers, payphones, etc,
put presentation type in its own column and expose in the public API these
type values.
Bug:6948882
Change-Id: I230c26aa0428d605a0e83169a635b5bbf1aa4e3f
Previously CarrierProvisioning toggle airplane mode, but now that's
available only by the system.
Bug: 9356811
Change-Id: I5167f8614c07bafb688983a360a008f76403b2b8
Allows the external BT stack the means to communicate with
ConnectivityService during reverse tethering.
bug:8445208
Change-Id: Ice7dfb0b50c9481d359aed14a51372878185171c
For mvno, user can add or edit mvno data field. To pre-provide
the mvno data of the edited apn when the user selects one of
the mvno types, need to support IMSI, SPN, and GID1 data.
To support GID1, make API to retrieve group identifier level1.
bug:6445254
Change-Id: I1bc280054cc7cd37e78a279866cefd62872a19fb
Add EVENT_DISCONNECT_DC_RETRYING, EVENT_SETUP_DATA_COMPLETE_ERROR
and State.RETRYING to DctContants.
Add MDC_INITIAL_MAX_RETRY to Settings.Global.
Bug: 4772191
Change-Id: Id54a20ab192783c63939158670faaf531a527640
Because ISms.aidl imports PendingIntent we couldn't easily
make opt/telephony part of the PDK. So this change moves
ISms.aidl and SmsRawData.*, which ISms.aidl also imports,
back to frameworks/base.
Change-Id: Ia64c6e771d5a292d9bfebb413a43f3745df55c85
Improve handling of vibration op, so that apps are
better blamed (there is now a hidden vibrator API that
supplies the app to blame, and the system now uses this
when vibrating on behalf of an app).
Add operation for retrieving neighboring cell information.
Add a new op for calling a phone number. This required
plumbing information about the launching package name through
the activity manager, which required changing the internal
startActivity class, which required hitting a ton of code that
uses those internal APIs.
Change-Id: I3f8015634fdb296558f07fe654fb8d53e5c94d07
Enable Turkish language encoding for SMS messages. Adds an
MCC-specific config.xml override to enable the Turkish
language tables for Turkish SIM cards. Also modifies
GsmAlphabet.java to load the config.xml values before use,
so the SMSDispatcher will get the current values instead of
caching the boot-time values before the MCC is loaded.
Bug: 7422368
Change-Id: I57cd5fcc1d04a2d0cba3e8b9022078679cf5d4c1
