- Change onCreateIncomingConnectionFailed/onCreateOutgoingConnectionFailed
to accept the connection mgr phone account as the first parameter.
- For the video APIs, pass the target SDK of the caller into along so
that the Telecom permission check can have fallback behavior for older API
versions.
- Add guidance for how UX should be shown in onShowIncomingCallUi API.
API guidance follows how the Dialer app shows its notification and full
screen UX.
Test: Manual, CTS.
Bug: 35767711
Bug: 35767096
Change-Id: Ib343f0eda1a4d067a38c553f33f140b4efcf3e48
Add methods and callbacks to facilitate local and remote RTT initiation
and termination in the middle of a call. Adds @hide Connection-side APIs
to communicate with the ConnectionService, as well as plumbing for
RemoteConnections.
Test: manual, through telecom testapps
Change-Id: Ia80604b7dff8586ff222dbccdbe55e91aab02178
Add signaling methods and data pipes for handling real-time text during
a call.
Change-Id: I876827c448252c5f786d7a4919c47891acb03877
Test: manual, through telecom testapps
When a calling InCallService attempts to use the setCamera API on the
VideoCall, Telecom will perform a permission check to ensure that the
caller has the correct camera permission and passes the app-ops camera
check. A failure to set the camera will result in a callback via the
call session event API.
This got a little messy as the app ops package name needs to come from the
InCallService, and handler usage in the VideoProvider API means we had to
pass around the uid/pid of the caller, obtained before we trampoline onto
the handler.
Test: Unit tests added, manual testing performed.
Bug: 32747443
Change-Id: I555a04f9c3fb45e60bb811f64ba855ccf2e3b0e2
Fixing some issues with the addExistingConnection and addConference APIs
on ConnectionService. When a connection manager relays the addition of
an existing connection or a conference to Telecom, it will assign a new
ID to the new connection/conference. Due to how RemoteCSes work, the
Connection/Conf will be added directly via TelephonyConnectionService and
also via the connection manager's connection service. Because the ID
changes, we ended up adding these twice. Conferences weren't a problem in
the GSM conference case because the TElephonyConnectionService's
ConnectionServiceWrapper didn't know of the IDs for the children of the
conference. However, due to how the existing connections work its not the
case for VoLTE conferences. To mitigate this, I'm passing the original
connection/conference ID to the connection manager via extras (ugh) and
using this to ensure that when the new existing connection/conference is
added to telecom that the same ID is used. This ensures that we can
properly de-dupe the requests from TelephonyConnectionService and the
connection manager.
Also, there was some missing code in RemoteConnectionService which would
cause it to not properly track existing connections.
Bug: 31464792
Change-Id: I436f4438fd000ea48ebea7ceb75105bd3f456e46
1. Adding new APIs for self-managed connection services.
2. Adding Telecom package-level documentation.
Test: Manual (unit, cts pending; this is just scaffolding for now)
Bug: 34159263
Change-Id: Ic226ec8bfcb2fbcc02fe802b47499e47aab17d0a
Modifies the ConnectionServiceAdapter to include Session Information in
the AIDL interface so that external Sessions can be started in Telecom
from Telephony.
Test: Manual testing and Unit Tests pass
Bug: 26571395
Change-Id: I31bbfe433dd062a50bd05083e1a639dd4cd03403
Modifies the IConnectionService.aidl file to include Session.Info
information to pass from Telecom to Telephony, which is used to start
external Sessions in Telephony from Telecom.
Test: Manual testing and Unit Tests pass
Bug: 26571395
Change-Id: Ia09a0abfa13d5167542d4c67465ea9aa1930b58b
When creating a new remote conference, there was a missing call to
"setConnectionProperties". This would prevent remote conferences from
being created with the correct properties as defined in the actual
conference.
Bug: 30383741
Change-Id: I335e35c222ae18b0d6ea7e750b91bcc36aa40ece
1) Finish plumbing of PULLING_CALL state.
2) Add new disconnect cause used when maximum number of calls across
all devices has been reached.
3) Add PII mask for toString of ImsExternalCallState.
Bug: 29522023
Change-Id: I78a0a9f3c3d846cfc58a1c5bcc6f105027602cbc
- Per suggestion of API council, moving properties of a Connection from
CAPABILITIES_* to PROPERTIES_*.
Bug: 27458894
Change-Id: Icce921b03cda514a991646ed39a26559c7e91230
Currently, connection extras are propagated up to Telecom as an
entire bundle. This is not ideal, as any time a change is made to
the extras, the bundle needs to be fetched, changed, and then re-set on
the connection, where it is parceled to Telecom as a whole.
Using how extras on an Intent as inspiration, this CL adds separate
putExtras, putExtra, and removeExtra methods to allow manipulation of
the extras bundle without operating on it in its entirety.
This Cl also adds support for Calls modifying the extras bundle, with
changes propagated back down to ConnectionServices.
Bug: 27458894
Change-Id: I152340a3bca2dc03f170b06b172a6823410fb961
This CL includes changes required to support multi-endpoint (see the
design doc linked off the bug).
Main changes include:
- support for indicating if a call/connection is "external" to the device.
- support for indicating if an external call can be pulled from the
remote device to the local device.
- API used to initiate a pull of a call external to the current device to
the current device.
- Made the "connection event" API public (was previously @hide); this will
be used to support passing some error events involving pulling calls to
the incall ui.
- Added new InCallService metadata which will be used to determine if an
InCallService wants to be informed of external calls.
- New disconnect causes which will be used to expose the fact that a
multi-endpoint call was answered elsewhere and that a call ended because
it was pulled to another device.
- New call log call types to indicate if calls were answered elsewhere
or pulled to another device.
Bug: 27458894
Change-Id: I423f64ff965b5e50194635a51868c327782db2a1
Connection event used to inform Telecom that it should play or stop
the on hold tone. This is used to play or stop a tone when the peer
puts the current call on hold.
BUG=25357778
Change-Id: I2669f8f5062449784a712b9dd28e576326fcc679
Two major changes:
1) Add the notion of extras to a Connection. These extras will be
parceled through to InCallService as Call.getExtras()
2) The previously existing Call.getExtras() has been renamed to
getIntentExtras(). This name better describes the fact that these
particular extras are from the original CALL or INCOMING_CALL intents.
Change-Id: I08c1baf4f08d54757f98012f0c08b423a707c53d
The merge failure is not plumbed up through any layer that
can trap the callback and act on it. The first part of this
fix is to create that plumbing. Then we need to reenable the
merge button. At this point in time, we leverage the fact
that forcing the call to reassess its capabilities will poke
the InCallUI to reenable the merge button. In the future, we
should plumb the merge failure all the way to InCallUI and
not only handle the button but display UI to the user. The UI
is currently being displayed by CallNotifier which is the wrong
place. See b/20530631 for more details.
Bug: 20229905
Change-Id: I0355ada46b484c6db4bee656c77386dd61be5e1f
-Add isVideo API to VideoProfile.VideoState
IMS-VT: Fix propagation of device orientation.
Orientation received at VT Service is incorrect.
Fixed propagation of device orientation to VT service.
IMS-VT: Upgrade fix
-Add session modify call timed out constant
Notify listeners of video quality changed event
- Propagate the video quality changed message to the UI.
IMS: Add support for video quality
- Add Config interface to get/set video quality
IMS-VT: Multitasking feature
-Support for video multitasking
IMS-VT: Modification of data usage aidl
Change data usage aidl interface to take parameter type long
instead of int
Change-Id: I7cda2a689edb86d025dfe8efc8f573918c4bd6bc
Propagate the call substate changed message to the UI
IMS-VT: Add call modifiable capability
PhoneCapababilities call type modifiable constant added
IMS-VT: Add a bit mask CALL_SUBSTATE_ALL with all call substate bits set
IMS-VT: Enable Video conferencing.
Enable Video conferencing.
Change-Id: I4240aa6f32c75d6eea8a41da3c87bca651f0901b
IMS-VT: Add hide for setVideoProvider API
Observed compilation error for SDK generation due to setVideoProvider
API. Marking setVideoProvider as hide inorder to resolve the
compilation error.
IMS-VT: Add persist.radio.ims.audio.output for VT calls
-- Add persist.radio.ims.audio.output to set the default speaker
for VT calls.
-- Add required constants
IMS-VT: Add additional error codes for upgrade downgrade
-Add support to send additional error codes to UI during
upgrade downgrade.
Change-Id: Id452d225098fe3bccdcd37d242985c5c761144c1
We created failed connections we no address attached.
When the connection is sent to RemoteConnectionService
the null address is translated to a setAddress() call.
This causes all failed connections to show up as "unknown".
Fix is to only call setAddress if creating the connection
succeeded.
BUG: 18830726
Change-Id: I680e2fa4c69157a9fdbfa348c6af1f2f87aafd48
When making an emergency call the fallback connection
manager would crash. The problem was that the connection
manager would get a setVideoProvider() call even though
it wasn't routing calls.
The root cause of this crash is b/19185063. As a short term
work around I'm adding a null check to avoid the crash.
BUG: 19020123
Change-Id: Ibe4a791882c9b5e21ae629a63f8d89cd3deba828
Add plumbing to alert Telecom every time a character is processed after
the post dial wait state (the processing happens in Telephony).
Bug: 18644688
Change-Id: I487d76aa9c959ca528c6377374aa35c2d0b4a803
- Add "addExistingConnection" method to connection service which provides
a way for a connection service to notify telecom of a pre-existing
connection (connections are normally created through telecom).
- Modify TelephonyConferenceController to retrieve its state from a
multiparty connection in the conference (in the case of IMS calls, this
would be the ImsCall that manages the conference) instead of just taking
the first one.
Bug: 18057361
Change-Id: I26993aec54ecb0ce90ae6983fd3eed9d8d0a5773
Add supporting (hidden) APIs to TelecomManager to add the ability to
add a previous unknown call to Telecom
Bug: 17787391
Change-Id: Ibdfaee81a55e11451c146751cf970980dccad435
If a remote connection fails to create call setDisconnected
instead of setState. This allows us to pass the disconnect
reason.
Note, this CL is very low risk since it only impacts remote
connections.
Bug: 17594857
Change-Id: Id296f3f5a4bb9168b358d3bfda94e04623a6b99c
+ Add a hidden "UNKNOWN" default type to ToneGenerator.
- Hide the Telephony DisconnectCause from the public API.
+ Add a Telecomm DisconnectCause. This is parcelable, and contains
information (code, user facing message, non-user facing reason,
and tone) to help describe the disconnect state and what behaviors
an application can implement for the user experience. This reduces
the causes for a disconnect to a more generic set.
+ Lots of work to pipe this through. DisconnectCause replaces the
code and message which were formerly passed around.
Bug: 17241433
Bug: 17329632
Change-Id: I9d337e478a8784bcc0ade02267c2df52cac9bf17
- Changing package from android.telecomm to android.telecom
- Changing package from com.android.telecomm to
com.android.server.telecomm.
- Renaming TelecommManager to TelecomManager.
Bug: 17364651
Change-Id: I192cb5d189f55db012ea72ee82ccc5aedbc21638
