Make the force close dialogs consistent with both the new rules for
wizardy-button bar UI flows and the previous arrangement that people
are used to. Force close = negative/back/cancel, Report =
positive/next/ok.
Change-Id: I212ba172f8076238a1833100b025b6e25a538a65
This should help third-party developers debug their apps.
Tested by adding logging to dalvik and launching a debuggable app.
Change-Id: Icec66825709e399e238b4ff00f2bc596485a3a60
When animating away a fragment, we were not putting it through
the last part of its lifecycle (onDestroy() etc).
Also, retained fragments that have a target were broken. Oops.
Change-Id: I5a669b77a2f24b581cde2a0959acf62edb65e326
...will only launch when held in portrait mode.
There was a bug in the window manager that caused all of the careful code to
update the configuration in sync with movements between activities to break.
Now it is fixed, so this app works, and we no longer see the bad slow orientation
changes when switching between activities that want to be in different
orientations.
Change-Id: I5d93f99649849bdaca2e8bebade6b91b8b6cf645
Usage: adb restore [tarfilename]
Restores app data [and installs the apps if necessary from the backup
file] captured in a previous invocation of 'adb backup'. The user
must explicitly acknowledge the action on-device before it is allowed
to proceed; this prevents any "invisible" pushes of content from the
host to the device.
Known issues:
* The settings databases and wallpaper are saved/restored, but lots
of other system state is not yet captured in the full backup. This
means that for practical purposes this is usable for 3rd party
apps at present but not for full-system cloning/imaging.
Change-Id: I0c748b645845e7c9178e30bf142857861a64efd3
There was a race in the system process between applying the initial
configuration and executing code in higher-level system services
like the app widget service that relies on the config. For some
reason it starting showing up more after my code changes; it should
now be completely fixed.
Also fix the activity starting window to run in compatibility mode
if its application is going to be in compatibility mode.
And some various cleanup and small fixes.
Change-Id: I0566933bf1bbb4259c1d99a60c0a3c19af1542e5
No longer accidentally puts an app into compatibility mode.
Also various cleanup, freezing screen while switching between modes.
Change-Id: Ic1b3958be7800189a93f68e9dee3c5adfc45fe57
Change-Id: I40d57e4354e48accc1027c9f90916ea73eb5190d
android:requiresSmallestWidthDp provides the smallest supported width.
android:compatibleWidthLimitDp provides the largest compatible width.
The POLICY_REJECT_BACKGROUND policy requires that network traffic be
blocked when a UID goes into the background. Even if the UID has an
activity in the foreground, it's considered "background" if the screen
is turned off.
This changes watches for SCREEN_ON/OFF broadcasts, and rule generation
now observes screen state. It also introduces an observer pattern so
that ActivityManager doesn't directly know about NetworkPolicy, and
moves the service management into SystemServer.
Change-Id: Ie7a84929d3ca60ae4578d47e19d5a8da10fd8d58
Activity manager now does all dump requests into apps
asynchronously, so it can nicely timeout if there is an
app problem. Also lots of general cleanup of the am
dump output.
Change-Id: I99447b87f77a701af52aeca984d93dfe931f065d
New system service that maintains low-level network policy rules and
collects statistics to drive those rules. Will eventually connect to
netfilter kernel module through NetworkManagementService and "netd".
Begin tracking foreground activities in ActivityManagerService, which
is updated as part of OOM adjustment. Eventually a network policy of
POLICY_REJECT_BACKGROUND will reject network traffic from background
processes.
Change-Id: I5ffbbaee1b9628e9c3eff6b9cb2145fc5316e64d
Adds a really crappy UI for toggling compat mode.
Persists compat mode selection across boots.
Turns on compat mode by default for newly installed apps.
Change-Id: Idc83494397bd17c41450bc9e9a05e4386c509399
This is the basic infrastructure for pulling a full(*) backup of the
device's data over an adb(**) connection to the local device. The
basic process consists of these interacting pieces:
1. The framework's BackupManagerService, which coordinates the
collection of app data and routing to the destination.
2. A new framework-provided BackupAgent implementation called
FullBackupAgent, which is instantiated in the target applications'
processes in turn, and knows how to emit a datastream that contains
all of the app's saved data files.
3. A new shell-level program called "bu" that is used to bridge from
adb to the framework's Backup Manager.
4. adb itself, which now knows how to use 'bu' to kick off a backup
operation and pull the resulting data stream to the desktop host.
5. A system-provided application that verifies with the user that
an attempted backup/restore operation is in fact expected and to
be allowed.
The full agent implementation is not used during normal operation of
the delta-based app-customized remote backup process. Instead it's
used during user-confirmed *full* backup of applications and all their
data to a local destination, e.g. via the adb connection.
The output format is 'tar'. This makes it very easy for the end
user to examine the resulting dataset, e.g. for purpose of extracting
files for debug purposes; as well as making it easy to contemplate
adding things like a direct gzip stage to the data pipeline during
backup/restore. It also makes it convenient to construct and maintain
synthetic backup datasets for testing purposes.
Within the tar format, certain artificial conventions are used.
All files are stored within top-level directories according to
their semantic origin:
apps/pkgname/a/ : Application .apk file itself
apps/pkgname/obb/: The application's associated .obb containers
apps/pkgname/f/ : The subtree rooted at the getFilesDir() location
apps/pkgname/db/ : The subtree rooted at the getDatabasePath() parent
apps/pkgname/sp/ : The subtree rooted at the getSharedPrefsFile() parent
apps/pkgname/r/ : Files stored relative to the root of the app's file tree
apps/pkgname/c/ : Reserved for the app's getCacheDir() tree; not stored.
For each package, the first entry in the tar stream is a file called
"_manifest", nominally rooted at apps/pkgname. This file contains some
metadata about the package whose data is stored in the archive.
The contents of shared storage can optionally be included in the tar
stream. It is placed in the synthetic location:
shared/...
uid/gid are ignored; app uids are assigned at install time, and the
app's data is handled from within its own execution environment, so
will automatically have the app's correct uid.
Forward-locked .apk files are never backed up. System-partition
.apk files are not backed up unless they have been overridden by a
post-factory upgrade, in which case the current .apk *is* backed up --
i.e. the .apk that matches the on-disk data. The manifest preceding
each application's portion of the tar stream provides version numbers
and signature blocks for version checking, as well as an indication
of whether the restore logic should expect to install the .apk before
extracting the data.
System packages can designate their own full backup agents. This is
to manage things like the settings provider which (a) cannot be shut
down on the fly in order to do a clean snapshot of their file trees,
and (b) manage data that is not only irrelevant but actively hostile
to non-identical devices -- CDMA telephony settings would seriously
mess up a GSM device if emplaced there blind, for example.
When a full backup or restore is initiated from adb, the system will
present a confirmation UI that the user must explicitly respond to
within a short [~ 30 seconds] timeout. This is to avoid the
possibility of malicious desktop-side software secretly grabbing a copy
of all the user's data for nefarious purposes.
(*) The backup is not strictly a full mirror. In particular, the
settings database is not cloned; it is handled the same way that
it is in cloud backup/restore. This is because some settings
are actively destructive if cloned onto a different (or
especially a different-model) device: telephony settings and
AndroidID are good examples of this.
(**) On the framework side it doesn't care that it's adb; it just
sends the tar stream to a file descriptor. This can easily be
retargeted around whatever transport we might decide to use
in the future.
KNOWN ISSUES:
* the security UI is desperately ugly; no proper designs have yet
been done for it
* restore is not yet implemented
* shared storage backup is not yet implemented
* symlinks aren't yet handled, though some infrastructure for
dealing with them has been put in place.
Change-Id: Ia8347611e23b398af36ea22c36dff0a276b1ce91
First step of improving app screen size compatibility mode. When
running in compat mode, an application's windows are scaled up on
the screen rather than being small with 1:1 pixels.
Currently we scale the application to fill the entire screen, so
don't use an even pixel scaling. Though this may have some
negative impact on the appearance (it looks okay to me), it has a
big benefit of allowing us to now treat these apps as normal
full-screens apps and do the normal transition animations as you
move in and out and around in them.
This introduces fun stuff in the input system to take care of
modifying pointer coordinates to account for the app window
surface scaling. The input dispatcher is told about the scale
that is being applied to each window and, when there is one,
adjusts pointer events appropriately as they are being sent
to the transport.
Also modified is CompatibilityInfo, which has been greatly
simplified to not be so insane and incomprehendible. It is
now simple -- when constructed it determines if the given app
is compatible with the current screen size and density, and
that is that.
There are new APIs on ActivityManagerService to put applications
that we would traditionally consider compatible with larger screens
in compatibility mode. This is the start of a facility to have
a UI affordance for a user to switch apps in and out of
compatibility.
To test switching of modes, there is a new variation of the "am"
command to do this: am screen-compat [on|off] [package]
This mode switching has the fundamentals of restarting activities
when it is changed, though the state still needs to be persisted
and the overall mode switch cleaned up.
For the few small apps I have tested, things mostly seem to be
working well. I know of one problem with the text selection
handles being drawn at the wrong position because at some point
the window offset is being scaled incorrectly. There are
probably other similar issues around the interaction between
two windows because the different window coordinate spaces are
done in a hacky way instead of being formally integrated into
the window manager layout process.
Change-Id: Ie038e3746b448135117bd860859d74e360938557
