1. Now a user state has ins own spooler since the spooler app is
running per user. The user state registers an observer for the state
of the spooler to get information needed to orchestrate unbinding
from print serivces that have no work and eventually unbinding from
the spooler when all no service has any work.
2. Abstracted a remote print service from the perspective of the system
in a class that is transparently managing binding and unbinding to
the remote instance.
3. Abstracted the remote print spooler to transparently manage binding
and unbinding to the remote instance when there is work and when
there is no work, respectively.
4. Cleaned up the print document adapter (ex-PrintAdapter) APIs to
enable implementing the all callbacks on a thread of choice. If
the document is really small, using the main thread makes sense.
Now if an app that does not need the UI state to layout the printed
content, it can schedule all the work for allocating resources, laying
out, writing, and releasing resources on a dedicated thread.
5. Added info class for the printed document that is now propagated
the the print services. A print service gets an instance of a
new document class that encapsulates the document info and a method
to access the document's data.
6. Added APIs for describing the type of a document to the new document
info class. This allows a print service to do smarts based on the
doc type. For now we have only photo and document types.
7. Renamed the systemReady method for system services that implement
it with different semantics to systemRunning. Such methods assume
the the service can run third-party code which is not the same as
systemReady.
8. Cleaned up the print job configuration activity.
9. Sigh... code clean up here and there. Factoring out classes to
improve readability.
Change-Id: I637ba28412793166cbf519273fdf022241159a92
These new constants are a better mapping to the kind of
information that procstats is wanting to collect about
processes. In doing this, the process states are tweaked
to have a bit more information that we care about for
procstats.
This changes the format of the data printed by procstats,
so the checkin version is bumped to 2. The structure is
the same, however the codes for process states have all
changed. The new codes are, in order of precedence:
p -- persistent system process.
t -- top activity; actually any visible activity.
f -- important foreground process (ime, wallpaper, etc).
b -- important background process
u -- performing backup operation.
w -- heavy-weight process (currently not used).
s -- background process running a service.
r -- process running a receiver.
h -- process hosting home/launcher app when not on top.
l -- process hosting the last app the user was in.
a -- cached process hosting a previous activity.
c -- cached process hosting a client activity.
e -- cached process that is empty.
In addition, we are now collecting uss along with pss
data for each process, so the pss checkin entries now
have three new values at the end of the min/avg/max uss
values of that process.
With this switch to using process state constants more
fundamentally, I realized that they could actually be
used by the core oom adj code to make it a lot cleaner.
So that change has been made, that code has changed quite
radically, and lost a lot of its secondary states and flags
that it used to use in its computation, now relying on
primarily the oom_adj and proc state values for the process.
This also cleaned up a few problems -- for example for
purposes of determing the memory level of the device, if a
long-running service dropped into the cached oom_adj level,
it would start being counted as a cached process and thus
make us think that the memory state is better than it is.
Now we do this based on the proc state, which always stays
as a service regardless of what is happening like this, giving
as a more consistent view of the memory state of the device.
Making proc state a more fundamentally part of the oom adj
computation means that the values can also be more carefully
tuned in semantic meaning so the value assigned to a process
doesn't tend to change unless the semantics of the process
has really significantly changed.
For example, a process will be assigned the service state
regardless of whether that services is executing operations
in the foreground, running normally, or has been dropped to
the lru list for pruning. The top state is used for everything
related to activities visible to the user: when actually on
top, visible but not on top, currently pausing, etc.
There is a new Context.BIND_SHOWING_UI added for when system
services bind to apps, to explicitly indicate that the app
is showing UI for the system. This gives us a better metric
to determine when it is showing UI, and thus when it needs
to do a memory trim when it is no longer in that state. Without
this, services could get in bad states of continually trimming.
Finally, more HashSet containers have been changed to ArraySet,
reducing the temporary iterators created for iterating over
them.
Change-Id: I1724113f42abe7862e8aecb6faae5a7620245e89
This does some cleanup of the initial boot, especially when
booting in "no core apps" mode for encryption/decryption.
Change-Id: Ifb3949f580e52f54559e603c4b0b104f6bac2f6c
Sometimes on quickly stopping and starting a user, a race condition
causes the user entry to disappear, causing crashes in Launcher and
SystemUI. Removing this step, since it doesn't really leave much
residue behind.
Bug: 7434849
Change-Id: Ia188602f1a79f75d307397459c2a03fadee4c722
Mark user 0 as initialized, otherwise it will show up as
uninitialized when viewed from secondary user if never switched to user 0.
Bug: 7301595
Also clean up any users that were in the process of being removed, if device
crashes at a bad time.
Change-Id: Ic16a6c9ccb6a64b7463725f6cc279335a821fcd5
New APIs let you indicate what user(s) to monitor, and tell you
what user is changing when receiving a callback.
Fix package manager to only deliver package brpadcasts to the
running users. (This isn't really a change in behavior, since
the activity manager would not deliver to stopped users anyway).
Make sure all broadcasts that package monitor receives also include
user information for it to use.
Update wallpaper service to (hopefully) now Really Correctly
monitor package changes per user.
Change-Id: Idd952dd274abcaeab452277d9160d1ae62919aa0
- New public APIs to find out when a user goes to the foreground,
background, and is first initializing.
- New activity manager callback to be involved in the user switch
process, allowing other services to let it know when it is safe
to stop freezing the screen.
- Wallpaper service now implements this to handle its user switch,
telling the activity manager when it is done. (Currently this is
only handling the old wallpaper going away, we need a little more
work to correctly wait for the new wallpaper to get added.)
- Lock screen now implements the callback to do its user switch. It
also now locks itself when this happens, instead of relying on
some other entity making sure it is locked.
- Pre-boot broadcasts now go to all users.
- WallpaperManager now has an API to find out if a named wallpaper is
in use by any users.
Change-Id: I27877aef1d82126c0a1428c3d1861619ee5f8653
Environment.getUserSystemDirectory(int userId)
Use it all relevant places that was hardcoding it.
Also, wipe out the user's system directory when user is removed, otherwise old state
might be transferred to a new user.
Change-Id: I788ce9c4cf9624229e65efa7047bc0c019ccef0a
Replaced all remaining places that used it with explicit user
specification.
While doing this, I ran into stuff that was creating PendingIntent
objects (that now need to specify the explicit user they are for),
which are also posting notifications... but have no way to specify
the user for the notification.
So the notification manager in the system process now also gets a
formal concept of a user associated with the notification, which
is passed in to all the necessary aidl calls. I also removed the
old deprecated aidl interface for posting/cancelling notifications,
since we now always need a user supplied.
There is more work that needs to be done here, though. For example
I think we need to be able to specify USER_ALL for a notification that
should be shown to all users (such as low storage or low battery).
Along with that, the PendingIntent creation needs to be tweaked to
be able to handle USER_CURRENT by evaluating the user at the point the
pending intent is sent.
That's for another change, however.
Change-Id: I468e14dce8def0e13e0870571e7c31ed32b6310c
You can now use ALL and CURRENT when sending broadcasts, to specify
where the broadcast goes.
Sticky broadcasts are now correctly separated per user, and registered
receivers are filtered based on the requested target user.
New Context APIs for more kinds of sending broadcasts as users.
Updating a bunch of system code that sends broadcasts to explicitly
specify which user the broadcast goes to.
Made a single version of the code for interpreting the requested
target user ID that all entries to activity manager (start activity,
send broadcast, start service) use.
Change-Id: Ie29f02dd5242ef8c8fa56c54593a315cd2574e1c
When the second user downloads a new wallpaper service, Wallpaper
service needs to query the correct user's package state to figure
out if it is available and bind to it.
Change-Id: Ifb95db1c859887f996f5b2e821b4b46510ee7016
Earlier assumption that systemui was running in the system process
does not hold true, so running static wallpaper in its own user
sandbox.
Bug: 7008230
Change-Id: I32a128e6bbd8efa7006286330e970bafcf37f05a
Use AtomicFile for usermanager files.
Added a MANAGE_USERS permission that apps (signature permission) can use
to create/query/modify/remove users.
Change-Id: I5cf232232d0539e7508df8ec9b216e29c2351cd9
Label the vmdl.*\.tmp files and the final .apk file differently.
Modify the WallpaperManagerService to restorecon the wallpaper file.
Signed-off-by: rpcraig <rpcraig@tycho.ncsc.mil>
Change-Id: Idfc056e9ec0508d7e11100626a7114f341f1af70
Broadcast intents that get sent out when users are added/removed/switched.
More work on generating user-specific information in package manager queries.
APIs to update user name and query a user by id.
Removed Package.mSetStopped and mSetEnabled, since they're not user specific.
User removal:
- Cleanup ActivityManager, PackageManager, WallpaperManager, AppWidgetService
and AccountManager.
- Shutdown processes belonging to the user.
Don't show vibrate option in long-press power if there's no vibrator.
Lock the screen when switching users, to force unlocking.
Change-Id: Ib23a721cb75285eef5fd6ba8c7272462764038fa
- Allow each user to have their own wallpaper (live or static).
- Migrate old wallpaper on upgrade.
- Update SystemBackupAgent to backup/restore from primary user's
new wallpaper directory.
Reduce dependency on Binder.getOrigCallingUser() by passing the
userId for bindService.
Change-Id: I19c8c3296d3d2efa7f28f951d4b84407489e2166
...wallpaper first time IRK81.
We were monitoring for file creates when those are not needed, and
receiving the initial file create was causing us to be confused.
Change-Id: Iccd3b7492c82895dba87f25c4881c538f300d342
Following a restore of the wallpaper data files, the settingsRestored()
method was binding the new wallpaper by passing null as the component,
because once upon a time that meant just use the configuration that had
just been loaded from the [newly restored] settings filed. However, at
some point this broke when the load from settings was made a staging
operation, not also the commitment of the changes.
This CL passes the newly-determined component configuration explicitly
to the bind, overriding the product default that may already have been
emplaced by the time the restore happens.
It also turns off the (minor) debugging that had been enabled in
WallpaperBackupHelper while digging into the issue.
Bug 5416839
Change-Id: I963893c236e24c75d10dde75836805295ea42cbb
Take care of updating from old component name, and don't let this happen
again.
Also tweak how we switch between static wallpapers to avoid introducing
a 4MB allocation in the system UI process when this happens -- we now
stop the current wallpaper service and start a new one, so we get a
brand new surface that we can draw only one time in to.
Change-Id: I6fc8a42b8a46bba79759bd68fb7d0684b5d897b7
Nice to not load 4MB bitmaps in the system process.
Also, hey, with how we are now scrolling the surface instead of
the bitmap, there is no reason to keep that 4MB bitmap loaded in
to memory. So don't.
Unfortunately it looks like for some reason the VM is still
holding on to the bitmap. I'll need to figure out why. Later.
Change-Id: Ib3503756144502fc5c8d5e294248c2417c4fe8c8
Applications now get the display size from the window manager. No
behavior should be changed yet, this is just prep for some real
changes.
Change-Id: I2958a6660895c1cba2b670509600014e55ee9273
The service connection to the previous live wallpaper is unbound when
a new wallpaper is effective. Although the service connection is
unbound it is not disconnected and its reference to wallpaper's
service and engine is still effective. This adds up to the total
JNI references and causes dalvik (hosting system_server) to abort.
Fix is to release the references in clearWallpaperComponentLocked.
Change-Id: Idd2bab83a56d2e6c6dd7ab9be08d5e14887aa384
No steps to repro, but makes the code more robust by using the standard
JournaledFile class and doing sanity checks on the input it reads.
This required moving the JournaledFile class in to the framework (and
we really should get rid of either it or AtomicFile, but they have
different recovery semantics so that is tough). Also went through and
cleaned up the file management in various places.
Change-Id: Ieb7268d8435e77dff66b6e67bb63b62e5dea572e
This is the framework part, moving classes around so the framework
no longer needs to link to android-common. Makes some APIs public,
others that didn't need to be public are private in the framework,
some small things are copied.
I am getting tired of writing package monitor code, realized this is missing in
a number of places, and at this point it has gotten complicated enough that I
don't think anyone actually does it 100% right so:
Introducing PackageMonitor.
Yes there are no Java docs. I am still playing around with just what this
thing is to figure out what makes sense and how people will use it. It is
being used to fix this bug for monitoring voice recognizers (integrating the
code from the settings provider for setting an initial value), to replace
the existing code for monitoring input methods (and fix the bug where we
wouldn't remove an input method from the enabled list when it got
uninstalled), to now monitor live wallpaper package changes (now allowing
us to avoid reverting back to the default live wallpaper when the current
one is updated!), and to monitor device admin changes.
Also includes a fix so you can't uninstall an .apk that is currently enabled
as a device admin.
Also includes a fix where the default time zone was not initialized early
enough which should fix issue #2455507 (Observed Google services frame work crash).
In addition, this finally introduces a mechanism to determine if the
"force stop" button should be enabled, with convenience in PackageMonitor
for system services to handle it. All services have been updated to support
this. There is also new infrastructure for reporting battery usage as an
applicatin error report.
