This is consistent with the existing getCallCapablePhoneAccounts API
which is used to get the phone accounts capable of placing phone calls.
Test: CTS
Bug: 34159263
Merged-In: I1396c63a6882947cd66721528e53b6964a9091e0
Change-Id: I1396c63a6882947cd66721528e53b6964a9091e0
Add methods and callbacks to facilitate local and remote RTT initiation
and termination in the middle of a call. Adds @hide Connection-side APIs
to communicate with the ConnectionService, as well as plumbing for
RemoteConnections.
Test: manual, through telecom testapps
Merged-In: Ia80604b7dff8586ff222dbccdbe55e91aab02178
Change-Id: Ia80604b7dff8586ff222dbccdbe55e91aab02178
- Change onCreateIncomingConnectionFailed/onCreateOutgoingConnectionFailed
to accept the connection mgr phone account as the first parameter.
- For the video APIs, pass the target SDK of the caller into along so
that the Telecom permission check can have fallback behavior for older API
versions.
- Add guidance for how UX should be shown in onShowIncomingCallUi API.
API guidance follows how the Dialer app shows its notification and full
screen UX.
Test: Manual, CTS.
Bug: 35767711
Bug: 35767096
Change-Id: Ib343f0eda1a4d067a38c553f33f140b4efcf3e48
Add methods and callbacks to facilitate local and remote RTT initiation
and termination in the middle of a call. Adds @hide Connection-side APIs
to communicate with the ConnectionService, as well as plumbing for
RemoteConnections.
Test: manual, through telecom testapps
Change-Id: Ia80604b7dff8586ff222dbccdbe55e91aab02178
This exposes an API to answer a ringing call, as well as a corresponding
runtime permission and appop
Test: Grant the permission and ensure the call gets answered.
Deny the permission, and ensure that the API call throws an exception.
Bug: 30932767
Change-Id: I4c33fcea6b95a30469fa6c0c37090be32b0ad52e
Add signaling methods and data pipes for handling real-time text during
a call.
Change-Id: I876827c448252c5f786d7a4919c47891acb03877
Test: manual, through telecom testapps
Also added new isInManagedCall TelecomManager API, used to determine if
there are ongoing managed calls only.
Test: Manual, cts
Bug: 34159263
Change-Id: Ib8020617607ccb433c2eee9b9d5a2c929665214b
Add support for wait on handlers adb telecom command. Used in CTS
tests to ensure work is completed once all Telecom handlers have finished
their current work.
Test: CTS, Manual
Bug: 34159263
Change-Id: I14acc0a04710b445c172629c2327813ee73a5a55
When a calling InCallService attempts to use the setCamera API on the
VideoCall, Telecom will perform a permission check to ensure that the
caller has the correct camera permission and passes the app-ops camera
check. A failure to set the camera will result in a callback via the
call session event API.
This got a little messy as the app ops package name needs to come from the
InCallService, and handler usage in the VideoProvider API means we had to
pass around the uid/pid of the caller, obtained before we trampoline onto
the handler.
Test: Unit tests added, manual testing performed.
Bug: 32747443
Change-Id: I555a04f9c3fb45e60bb811f64ba855ccf2e3b0e2
1. Adding new APIs for self-managed connection services.
2. Adding Telecom package-level documentation.
Test: Manual (unit, cts pending; this is just scaffolding for now)
Bug: 34159263
Change-Id: Ic226ec8bfcb2fbcc02fe802b47499e47aab17d0a
Modifies the ConnectionServiceAdapter to include Session Information in
the AIDL interface so that external Sessions can be started in Telecom
from Telephony.
Test: Manual testing and Unit Tests pass
Bug: 26571395
Change-Id: I31bbfe433dd062a50bd05083e1a639dd4cd03403
Modifies the IConnectionService.aidl file to include Session.Info
information to pass from Telecom to Telephony, which is used to start
external Sessions in Telephony from Telecom.
Test: Manual testing and Unit Tests pass
Bug: 26571395
Change-Id: Ia09a0abfa13d5167542d4c67465ea9aa1930b58b
1) Finish plumbing of PULLING_CALL state.
2) Add new disconnect cause used when maximum number of calls across
all devices has been reached.
3) Add PII mask for toString of ImsExternalCallState.
Bug: 29522023
Change-Id: I78a0a9f3c3d846cfc58a1c5bcc6f105027602cbc
Add classes for call events and a field for them in
ParcelableCallAnalytics.
Add classes for timing information on user-visible operations.
Add the TelecomAnalytics class as the top-level object for analytics.
Add log session timing information to the TelecomAnalytics class,
independent of individual calls.
Bug: 28623064
Change-Id: Ifee5fdf6b6b341869ff0ff26c4388d357e3d9922
- Per suggestion of API council, moving properties of a Connection from
CAPABILITIES_* to PROPERTIES_*.
Bug: 27458894
Change-Id: Icce921b03cda514a991646ed39a26559c7e91230
Currently, connection extras are propagated up to Telecom as an
entire bundle. This is not ideal, as any time a change is made to
the extras, the bundle needs to be fetched, changed, and then re-set on
the connection, where it is parceled to Telecom as a whole.
Using how extras on an Intent as inspiration, this CL adds separate
putExtras, putExtra, and removeExtra methods to allow manipulation of
the extras bundle without operating on it in its entirety.
This Cl also adds support for Calls modifying the extras bundle, with
changes propagated back down to ConnectionServices.
Bug: 27458894
Change-Id: I152340a3bca2dc03f170b06b172a6823410fb961
This CL includes changes required to support multi-endpoint (see the
design doc linked off the bug).
Main changes include:
- support for indicating if a call/connection is "external" to the device.
- support for indicating if an external call can be pulled from the
remote device to the local device.
- API used to initiate a pull of a call external to the current device to
the current device.
- Made the "connection event" API public (was previously @hide); this will
be used to support passing some error events involving pulling calls to
the incall ui.
- Added new InCallService metadata which will be used to determine if an
InCallService wants to be informed of external calls.
- New disconnect causes which will be used to expose the fact that a
multi-endpoint call was answered elsewhere and that a call ended because
it was pulled to another device.
- New call log call types to indicate if calls were answered elsewhere
or pulled to another device.
Bug: 27458894
Change-Id: I423f64ff965b5e50194635a51868c327782db2a1
Connection event used to inform Telecom that it should play or stop
the on hold tone. This is used to play or stop a tone when the peer
puts the current call on hold.
BUG=25357778
Change-Id: I2669f8f5062449784a712b9dd28e576326fcc679
This CL adds a new service that the default dialer can implement to
screen incoming calls.
If the service is implemented then Telecom uses it to decide if a call
should be shown to the user or rejected.
Note, I initially tried to simply extend InCallService instead of
creating a whole new service. The problem with this approach is that:
- this breaks some in call services which show UI as soon as they are
bound to
- the in call service lifecycle is tightly coupled to adding and
removing calls. Call screening happens before a call is added which
makes it a bad fit to in call service
- call screening is a function of only the default dialer's in call
service but the existing code also binds to "controller" call
services
For these reasons it seemed simpler to just create a new optional
service.
BUG: 22857261
Change-Id: I53f2ef93360e0af19b6ce45af21026be6cf3a7f3
This CL exposes a new meta-data, IN_CALL_SERVICE_RINGING. If this is set
to true then ringing is played by the dialer instead of Telecom.
This CL also adds a new silenceRinger() API to InCallService. This is
needed to implement ringer silence on volume key down.
BUG: 22857261
Change-Id: I498538282eddbb727104f5b879f25adbef4e6cf6
Add dumpAnalytics in TelecomManager to allow the connectivity stats
service to access Telecom analytics for uploading.
Change-Id: I197d6af340fac7f38b28bb44a476b5e694db4dba
- Added acceptRingingCall API which accepts a videostate to complement the
existing API.
Bug: 20159300
Change-Id: I2a9d53fd4dbbb0be49d95416f7e26d3ec61774cd
This CL adds the following permissions by default to the
SIM call manager:
- microphone
- phone
BUG: 22790160
Change-Id: Icaf1db6c6943b3ddbd16a946a81d1bfb734d761f
Add commands accessible via adb shell that can be used for CTS tests
without the need for adb root
*set-phone-account-enabled
*set-phone-account-disabled
*set-default-dialer
*get-default-dialer
Modify enablePhoneAccount/setDefaultDialer to indicate success.
Remove now unused functionality in ProtectedEnableAccountPreferenceActivity
and ProtectedChangeDefaultDialerActivity.
Bug: 21583012
Change-Id: I542d145cc969334c004b8344fbbb01f278256f9d
Two major changes:
1) Add the notion of extras to a Connection. These extras will be
parceled through to InCallService as Call.getExtras()
2) The previously existing Call.getExtras() has been renamed to
getIntentExtras(). This name better describes the fact that these
particular extras are from the original CALL or INCOMING_CALL intents.
Change-Id: I08c1baf4f08d54757f98012f0c08b423a707c53d
Deprecate AudioState class and make methods @SystemApi where
necessary to minimize impact to SystemApi
Replace usages of AudioState inside Telecom sub-systems
Fire both onCallAudioStateChanged and onAudioStateChanged callbacks
for backward compatibility
Support both setAudioState and setCallAudioState for all classes
Bug: 21040387
Bug: 21088300
Change-Id: I3ec7b3afdaa344c6d639d1c421f1842d67f7d0f7
Move CameraCapabilities into VideoProfile
Make PhoneAccount and PhoneAccountHandle final
Bug: 21040387
Bug: 21066505
Change-Id: I72453c89ae3765f9b9cf263938fce96d5978d2e0
Including a fromProfile in addition to the requestedProfile.
- Changed VideoCallImpl to generate the fromVideoProfile based on the
call's current videoState. This ensures the InCall UI only needs to
pass in the new video profile; the VideoCall Impl already has enough
knowledge to generate the fromProfile.
- Changed VideoCallImpl to track the current videoQuality, which forms
a part of the fromVideoProfile.
Bug: 20704229
Change-Id: I89f293f03a2b13fc8c1dcfd8a07ab8640d3950e0
Check for the default dialer or the modify phone state permission
for various TelecomManager/TelephonyManager methods.
Make sure to check the user-selected default rather than the
hardcoded package name.
Exercise this code in TestDialerActivity.
Bug: 20304458
Change-Id: Ic04cd8f2ba98e1d54c39549ae89d3e11cd5cdafb
The merge failure is not plumbed up through any layer that
can trap the callback and act on it. The first part of this
fix is to create that plumbing. Then we need to reenable the
merge button. At this point in time, we leverage the fact
that forcing the call to reassess its capabilities will poke
the InCallUI to reenable the merge button. In the future, we
should plumb the merge failure all the way to InCallUI and
not only handle the button but display UI to the user. The UI
is currently being displayed by CallNotifier which is the wrong
place. See b/20530631 for more details.
Bug: 20229905
Change-Id: I0355ada46b484c6db4bee656c77386dd61be5e1f
* changes:
Rename removeVideoCallListener to unregisterCallback
Bluetooth document fix: remove reference from open API to hidden entities
Fix build due to merge of 7595842 and renaming due to 8eb87f0
Merge commit '052a0da' into merge2
Merge commit 'db1dbb8' into merge2
Merge commit '7e5e791' into merge2
Merge commit '170102d' into merge2
Merge commit '4cb5d80' into merge2
Merge commit '83cda00' into merge2
Merge commit 'c91bc62' into merge2
Merge commit 'cffc360' into merge2
Merge commit '7f61051' into merge2
Merge commit '167c3a7' into merge2
Merge commit '4467b98' into merge2
Merge commit '25a217c' into merge2
Merge commit '04b18ec' into merge2
Merge commit '7595842' into merge2
Merge commit '2bbd2b6' into merge2
Merge commit '4890351' into merge2
Merge commit 'cd405fe' into merge2
Merge commit '6ddbb5e' into merge2
Merge commit 'de93575' into merge2
Merge commit '9561e74' into merge2
