AAPT fix printf %zd crash on Windows.
There's no printf %zd on Mingw/Cygwin so the verbose
printf crashes aapt.
SDK bugs: 20395, 20986
Change-Id: Ic201faffd871bd4c1b7d173d84b089e09750cd85
It is no longer sufficient to check the value of
internal.R.bool.config_showNavigationBar to determine if a
navigation bar (separate from the status bar) is shown on a
device, because the emulator needs to be able to override
this value (now possible by setting qemu.hw.mainkeys to "1"
or "0", for navbar or no navbar, respectively).
This logic is now contained in PhoneWindowManager, and any
clients wishing to know whether the system has a software
nav bar should consult the new hasNavigationBar() method.
Bug: 5404945
Change-Id: I119d32a8c84b88b2ef46f63244e7f11dc5de0359
This adds a --preferred-configurations flag that specifies the
specific configurations you would like to have.
It is smarter than "-c" because it will avoid stripping a
configuration if that would result in there being no value
for the resource.
It is dumber than "-c" because it can't process as many kinds
of resources. It is really only intended for bitmaps and use
with density configs.
This required re-arranging AaptAssets to group files together
by config again, like they used to be. I think this hasn't
broken anything. Hopefully.
Change-Id: I4e9d12ff6e6dbd1abb8fd4cb1814c6674b19d0e5
Bug: 5332296
Ensure that there is always an owner for each CursorWindow
and that references to each window are acquired/released
appropriately at all times.
Added synchronization to CursorToBulkCursorAdaptor to
prevent the underlying Cursor and CursorWindow from being
remotely accessed in ways that might violate invariants,
resulting in leaks or other problems.
Ensured that CursorToBulkCursorAdaptor promptly releases
its references to the Cursor and CursorWindow when closed
so they don't stick around longer than they should, even
if the remote end hangs onto the IBulkCursor for some reason.
CursorWindow respects Parcelable.FLAG_WRITE_RETURN_VALUE
as an indication that one reference to the CursorWindow is
being released. Correspondingly, CursorToBulkCursorAdaptor
acquires a reference to the CursorWindow before returning
it to the caller. This change also prevents races from
resulting in the transfer of an invalid CursorWindow over
the wire.
Ensured that BulkCursorToCursorAdaptor promptly releases
its reference to the IBulkCursor when closed and throws
on attempts to access the cursor while closed.
Modified ContentProviderNative to handle both parts of
the wrapping and unwrapping of Cursors into IBulkCursors.
This makes it a lot easier to ensure that the right
things happen on both ends. Also, it turns out that
the only caller of IContentProvider.bulkQuery was
ContentProviderNative itself so there was no need
to support bulkQuery on ContentProviderProxy and it was
just getting in the way.
Implement CloseGuard on CursorWindow.
Change-Id: Ib3c8305d3cc62322f38a06698d404a2989bb6ef9
This cleans up how ui flags are managed between the client and window manager.
It still reports the global UI mode state to the callback, but we now only clear
certain flags when the system goes out of a state (currently this just means the
hide nav bar mode), and don't corrupt other flags in the application when the
global state changes.
Also introduces a sequence number between the app and window manager, to avoid
using bad old data coming from the app during these transitions.
Change-Id: I40bbd12d9b7b69fc0ff1c7dc0cb58a933d4dfb23
Also parse fallback_fonts.
This lets layoutlib automatically use the same fonts as the base
platforms, for instance it now uses the new ICS fonts.
Change-Id: Id6e778dc0e3f2a9112601e0eaf8499a9713ec433
This include a fix in layoutlib_create to properly handle
delegating a static method of an inner class (was broken and
only worked on non static method).
Added a few comments here and there to *_Accessor classes so
that it's a bit more obvious what they are for and how they are
used.
Change-Id: Ifc31dd1a006393bb0c08e22b6a17f500dd62e090
Localized strings with product variants were not being included in the APK,
apparently because the check to ensure that a different variation of the
string had not already been included in the APK was matching the version
of it from the default, untranslated configuration.
Now check to make sure that the string not only exists but also exists in
the correct configuration.
Bug 5372711
Change-Id: I52975570b75e0f11827dc6bcf1cb4a987d0541aa
Bug: 4981385
Changed the orientation listener to notify the policy whenever
its proposed orientation changes, and changes the window manager
to notify the orientation listener when the actual orientation
changes. This allows us to better handle the case where the
policy has rejected a given proposal at one time (because the
current application forced orientation) but might choose
to accept the same proposal at another time.
It's important that the proposal always be up to date. A proposal
becomes irrelevant as soon as the phone posture changes such
that we can no longer determine the orientation with confidence
(such as when a device is placed flat on a table).
Simplified the orientation filtering. Now we just wait 200ms
for the device to be still before issuing a proposal. The idea
is that if the device is moving around a lot, we assume that
the device is being picked up or put down or otherwise in
the process of being moved. We don't want to change the rotation
until that's all settled down. However, we do want to tolerate
a certain amount of environmental noise.
(The previous confidence algorithm was also designed along
these lines but it was less direct about waiting for things
to settle. Instead it simply made orientation changes take
longer than usual while unsettled, but the extra delay was often
too much or too little. This one should be easier to tune.)
Change-Id: I09e6befea1f0994b6b15d424f3182859c0d9a530
...Should Skip Unsecure Lockscreen (ICS)
Also while I am in there, clean up logging of intent objects to include
even less sensitive information, while showing the true Intent in dump
output (since apps can't get to that).
Change-Id: I35fed714645b21e4304ba38a11ebb9c4c963538e
Bug: 4981385
Simplify the orientation changing code path in the
WindowManager. Instead of the policy calling setRotation()
when the sensor determined orientation changes, it calls
updateRotation(), which figures everything out. For the most
part, the rotation actually passed to setRotation() was
more or less ignored and just added confusion, particularly
when handling deferred orientation changes.
Ensure that 180 degree rotations are disallowed even when
the application specifies SCREEN_ORIENTATION_SENSOR_*.
These rotations are only enabled when docked upside-down for
some reason or when the application specifies
SCREEN_ORIENTATION_FULL_SENSOR.
Ensure that special modes like HDMI connected, lid switch,
dock and rotation lock all cause the sensor to be ignored
even when the application asks for sensor-based orientation
changes. The sensor is not relevant in these modes because
some external factor (or the user) is determining the
preferred rotation.
Currently, applications can still override the preferred
rotation even when there are special modes in play that
might say otherwise. We could tweak this so that some
special modes trump application choices completely
(resulting in a letter-boxed application, perhaps).
I tested this sort of tweak (not included in the patch)
and it seems to work fine, including transitions between
applications with varying orientation.
Delete dead code related to animFlags.
Handle pausing/resuming orientation changes more precisely.
Ensure that a deferred orientation change is performed when
a drag completes, even if endDragLw() is not called because the
drag was aborted before the drop happened. We pause
the orientation change in register() and resume in unregister()
because those methods appear to always be called as needed.
Change-Id: If0a31de3d057251e581fdee64819f2b19e676e9a
The SDK build system does not provide an output file
and instead uses the -o<FOLDER> option and lets aidl figure
out the intermediary folders that represents the packages,
and the filename based on the input file (and its package).
Because of this the -d<FILE> option to generate a dependency
file is not convenient.
Instead the new option, -a (no parameters), automatically generate
a dependency files next to the output file.
Also, when compiling parcelable aidl files, without the -b option,
a dependency file is still generated. This is used by the SDK build
system since it cannot parse the file separately and instead tries
to compile every .aidl file.
The generation of this dependency file (which shows no output) allows
to know when any type of aidl file has been compiled.
Change-Id: If81dc7e1e0a780592c94d1850a1d1b094d6e7908
...(when turning display on after recently turning it off)
Also clean up when we decide to turn the screen on to improve that
transition. There are still problems here with turning it on
before the wallpaper gets dispayed.
Change-Id: I2bc56c12e5ad75a1ce5a0546f43a845bf0823e66
This changes the name of the generated dependency files to R.java.d
and <ApkName>.ap_.d respectively.
Change-Id: I17e18770fc0d0a5d31c7b37b40ac1949f45ef13a
The new Holo-style overflow menu now appears from the edge of the screen
where the device's physical menu key can be found. The policy determining
this lives in getPreferredOptionsPanelGravity() in WindowManagerService.
Change-Id: I8851a2265547156591e82044e50b5cfc58d3eefa
This change removes debugging code from FileFinder.
This code was considered harmful because it uses the std::cout
from <iostream>.
Change-Id: Iad9b5e8a631883bd4854abdb29bc6df8a5b4a056
The input reader needs this information so that it knows how to
interpolate touches on an external touch screen.
Changed Display so that it asks the WindowManager what the real
display size is (as opposed to the raw display size). This means
it now takes into the forced display size set by
adb shell am display-size.
Replaced all calls to getRealWidth() / getRealHeight() /
getRealMetrics() in the WindowManager and replaced them with direct
usages of the mCurDisplayWidth / mCurDisplayHeight so that the WM
doesn't end up making a reentrant Binder call into itself.
Fixed the table status bar HeightReceiver so that it updates the
height on all configuration changes since it is possible that the
display size changed independently of an external HDMI display
being plugged / unplugged.
Improved the Display class documentation to make the distinctions
betweeen the various sizes clearer.
Change-Id: I3f75de559d3ebffed532ab46c4ae52c5e7f1da2b
The arguments that ZipFile takes were apparently meant to be a typed
enum, but the name of the type was taken out because it creates invalid
conversion warnings in C++ since this is an invalid use of enum.
Just change the typedef enum to an anonymous enum so we get rid of the
compiler warnings. It will be implicitly converted to int instead.
Change-Id: Ie72c4c235c8f9ee8fd1b795e1010b77c55e983de
