Status bar uses the SINK_STATE_CHANGE intent to determine the icon.
This intent also has the device. Thus, we can get this intent for any
device and we update the icon wrongly. The same problem is with Wifi.
This was not commonly observed till now, but with the car dock changes
its easy to reproduce as we can get an incoming connection from the
car's bluetooth system. For Wifi, this will cause coexistance issues
especially with desk docks.
Dr No: Eastham
Bug: 2133530
Follow up to bug 2195678. This was one of the reprocussions that
I was worried about with respect to that bug, so I'm counting
Dr. No on that change as the one for this one.
Bug 2195678
We had all this stuff there to keep the notification view
around so it doesn't need to be reconstructed each time,
and we weren't using it. This fixes that, and it looks
much better now.
This thing needs to be rewritten. It's grown too complicated for what it's doing,
and I don't like the physics anyway.
Also, this leaves the bug where if you press back while it's animating down, the
animation is ignored. However it no longer jumps down all the way, it just
essentially ignores the back key.
Also, this makes the collapse get executed on the back key up event, so it works
with the swipe on the soft keys at the bottom of the screen.
Since the StatusBarPolicy is run in the System Process and shouldn't therefore call into
the Telephony process we decided to make sure all the needed info was passed along with the
original notifications.
bug: 2173053
This is the main entry point to the Bluetooth APIs, and returns the default
local Bluetooth adapter.
It replaces context.getSystemService(Context.BLUETOOTH_SERVICE). This was
never in a public SDK release.
DrNo: eastham
Bug: 2158765
Joke: Why can't you play cards in the jungle? Because there's too many cheetas!
Change-Id: Ieed8be009ee5aba621cb69090ee8c8a9c19c840d
Also trigger low battery when battery reaches the specified level
rather than when it drops below the level.
Fixes bug b/1788656
Change-Id: I81f5cbb9892fc6574320d92e153211f83c69f415
Signed-off-by: Mike Lockwood <lockwood@android.com>
This is a large batch, and covers:
-- Bluetooth Device Discovery --
BluetoothAdapter.ACTION_DISCOVERY_STARTED
BluetoothAdapter.ACTION_DISCOVERY_FINISHED
BluetoothAdapter.startDiscovery()
BluetoothAdapter.cancelDiscovery()
BluetoothAdapter.isDiscovering()
-- Bluetooth bonding (pairing) --
BluetoothAdapter.getBondedDevices()
BluetoothDevice.ACTION_BOND_STATE_CHANGED
BluetoothDevice.EXTRA_BOND_STATE
BluetoothDevice.EXTRA_PREVIOUS_BOND_STATE
BluetoothDevice.BOND_NONE
BluetoothDevice.BOND_BONDING
BluetoothDevice.BOND_BONDED
BluetoothDevice.getBondState()
BluetoothDevice.createBond()
BluetoothDevice.cancelBondProcess()
BluetoothDevice.removeBond()
-- BluetoothClass --
BluetoothDevice.ACTION_CLASS_CHANGED
BluetoothDevice.EXTRA_CLASS
BluetoothDevice.getBluetoothClass()
BluetoothClass.Service.*
BluetoothClass.Device.Major.*
BluetoothClass.Device.*
BluetoothClass.getDeviceClass()
BluetoothClass.getMajorDeviceClass()
BluetoothClass.hasService()
-- Misc BluetoothDevice --
BluetoothDevice.ACTION_ACL_CONNECTED
BluetoothDevice.ACTION_ACL_DISCONNECTED_REQUESTED
BluetoothDevice.ACTION_ACL_DISCONNECTED
BluetoothDevice.ACTION_DISCOVERED
BluetoothDevice.ACTION_NAME_CHANGED
BluetoothDevice.EXTRA_DEVICE
BluetoothDevice.EXTRA_NAME
BluetoothDevice.EXTRA_RSSI
-- Misc BluetoothAdapter --
BluetoothAdapter.ACTION_LOCAL_NAME_CHANGED
BluetoothAdapter.EXTRA_LOCAL_NAME
BluetoothAdapter.checkBluetoothAddress()
I deprecated BluetoothIntent and moved each intent into the class it relates
to.
Change-Id: I877b1280428ab46278b2bc25668bb44cda22dc36
Deprecate BluetoothError.java.
I spent a lot of time experimenting with a class BluetoothError to enumerate
the many error codes returned by the Bluetooth API. But at the end of the day
they were never used. The vast majority of method calls only really need a
true/false error value, and often not even that.
Methods which do need more detailed error enumeration (for example, bonding
failures) can have there own enumerated error codes. But there is no need
for a common set of error codes.
Also change the IPC failed warnings in BluetoothA2dp to Log.e. These indicate
a very serious error.
Introduce BluetoothAdapter.ERROR and BluetoothDevice.ERROR as helper sentinel
values.
Update the RSSI display policy in CDMA.
1. Use single RSSI icon instead of two icons
2. If 3G(EV) and 1x network are available than 3G should be displayed, Displayed RSSI should be from the EV side.
3. If a voice call is made then RSSI should switch to 1x.
HSDPA: High-Speed Downlink Packet Access
HSUPA: High-Speend Uplink Packet Access
HSPA: High-Speed Packet Access
Add support for HSDPA/HSUPA/HSPA:
1) extend TelephonyManager.NETWORK_TYPE for HSDPA/HSUPA/HSPA
2) extend ServiceState.RADIO_TECHNOLOGY for HSDPA/HSUPA/HSPA
3) set radioTechnology into ServiceState in GsmServiceStateTracker
4) change the implementation of TelephonyManager.getNetworkType to
solve the competition timing issue between the time of setting
system property and the time of receiving notification through
PhoneStateListener
4.1) add a getNetworkType interface in ITelephony.aidl
5) add icons resources for HSDPA/HSUPA/HSPA
6) make use of HSDPA/HSUPA/HSPA icons in StatusBarPolicy
Split BluetoothDevice into BluetoothDevice and BluetoothAdapter.
BluetoothAdapter: Represents the local BT adapter. Operations on the local
adapter (start a scan, etc).
BluetoothDevice: Represents a remote BT device. Operations on remote devices
(pair, connect, etc).
IBluetoothDevice.aidl -> Bluetooth.aidl
BluetoothDeviceService.java -> BluetoothDeviceService.java
TODO:
Javadoc
The issue this change fixes is that phone status bar shows full
signal strength bar even when phone is in bad signal area. The
root cause is that the signal strenth is incorrectly interpreted.
- Update according to comments
- Add aidl support in frameworks for Settings to retrieve current
PBAP transaction status.
- Add status bar support for PBAP
This is a little hacky -- we just assume that if adb is enabled and power
is connected through usb, then it is active.
The icons and text are temporary until final design is provided.
Merge commit '35feec46d90d434a2439765d127a9e8f68a52340'
* commit '35feec46d90d434a2439765d127a9e8f68a52340':
TODO's from Teleca with modifications from wink.
Merge commit '95fc68f24a2a93e5664e2234abcfe479d385cc05'
* commit '95fc68f24a2a93e5664e2234abcfe479d385cc05':
Fix issue where apps could prevent the user from going home.
Now we have a 5-second time after home is pressed, during which
only the home app (and the status bar) can switch to another app.
After that time, any start activity requests that occurred will
be executed, to allow things like alarms to be displayed. Also
if during that time the user launches another app, the pending
starts will be executed without resuming their activities and
the one they started placed at the top and executed.
Merge commit 'aa642c0cc20293137376d44f8221876c121e5be9'
* commit 'aa642c0cc20293137376d44f8221876c121e5be9':
Get the backup calling through to the file backup helper.
Fix typos.
Add a new feature to android.os.Debug to add the ability to inject only specific fields when calling setFieldsOn().
Fixes#1836075. Adds consistency checks for the View hierarchy. To enable them, you need a debug build and ViewDebug.sConsistencyCheckEnabled set to true in debug.prop. This change also lets you easily enable drawing and layout profiling in ViewRoot by setting ViewRoot.sProfileDrawing, ViewRoot.sProfileLayout and ViewRoot.sShowFps in debug.prop with a debug build.
Add Intent.ACTION_APP_ERROR
