Fix some race conditions (check isTeardownRequested).
Fix the passing of mInterfaceName to subtypes (mms, etc).
Fix the generation of CONNECTED message to already active subtypes.
Fix the enabling of Data in DataConnectionTracker.
bug: 2065037
Based on the VZW requirement, phone should be still in ECM mode in 2nd emergency call.
but in the current phone call, if a 2nd emergency call is originated, ECM mode will exit.
For fixing this problem, the coding design is as below:
1. In framework, canceling the first ECM timer immediately upon the origination of the
2nd E911 call, and restarting a new timer when the 2nd E911 ends.
2. Framework needs to syncronize the timer with phone app by sending notification to phone app to
inform timer is canceled or re-started, since phone app needs to show how much ECM time left
on the status bar.
3. In phone app's emergency callback mode service, the timer in this service will be canceled
when it receives the timer cancel notification from framework; the timer will be restarted
once it receives timer restart notification from framework.
Issues to be addressed:
The method setPowerStateToDesired() in CdmaServiceStateTracker class sends
a msg to CdmaDataConnectionTracker class to deactive data call, and then starts
a loop which calls SystemClock.sleep() to wait for several seconds.The purpose
of this is to wait for data-disconnection before sending RADIO_POWER off request.
However, the CdmaServiceStateTracker and CdmaDataConnectionTracker are running in
the same process so that the CdmaDataConnectionTracker is not able to process the
message to deactive data before the loop ends.
The patch includes the following changes:
1) In setPowerStateToDesired() in CdmaServiceStateTracker, replace implementation
of loop-delay by sending a delayed msg to set RADIO_POWER off.
2) In CdmaDataConnectionTracker, when getting EVENT_DISCONNECT_DONE, call a new
method in CdmaServiceStateTracker to process pending request to turn RADIO_POWER
off.
to retry a connection and possibly reconnect after a temporary data loss.
The root cause appears to be because DEACTIVATE and POWER_RADIO_OFF are
sent back to back and POWER_RADIO_OFF completes before DEACTIVATE.
When this happens CdmaDataConnectionTracker won't attempt to reestablish
a data connection until a voice call terminates.
At this time it appears the better solution is have CdmaDataConnectionTracker
wait for DEACTIVATE to complete before issuing POWER_RADIO_OFF, this fix
will be implemented in the near future.
and when data roaming is enabled reset the retry manager.
This change also refactors mRetryMgr to DataConnectionTracker
removing it from Cdma and Gsm data connection trackers child classes.
Setting max_retires to infinite sets mRetryForever to true and therefore
isRetryNeeded will always be true. This is better than an alternative
which is to set max_retires to a large value such as 2147483647.
Seperate dataRoaming from gsmRoaming. dataRoaming is based on +CGREG returns in GSM while gsmRoaming is based on +CREG returns. Previously, the status of dataRoaming is always treated the same as gsmRoaming. However there is a situation where +CREG returns 0 and +CGREG returns 5, i.e., gsmRoaming is off and dataRoaming is on. In such situation, the phone should setup data connection if the phone enables data service when roaming (for example, data only card). The phone shouldn't setup data connection if the phone disable data service when roaming (to prevent roaming data charge). So gsmDataConnectionTracker should use dataRoaming instead of gsmRoaming to decide if data service allowed.
modified: GsmDataConnectionTracker.java
modified: GsmServiceStateTracker.java
This also refactors ConnectivityService a bit towards supporting multiple simultaneous connections by making each a seem like a seperate Network with it's own stateTracker, etc.
Also adds tracking of process death to clean orphaned startUsingNetworkFeature features.
The issue is that the plus sign in a dial string is always converted
to the IDP (International Dial Prefix).
This fix implements a plus sign conversion mechanism based on the default
telephone numbering system that the phone is activated and the current telephone
number system that the phone is camped on. Currently, we only support the cases
where the default and current telephone numbering system are NANP.
This method is used by the Phone app to decode ACTION_CALL
Intents, resolving to a real phone number. Because the
columns are changing with the new provider, I added logic
to query using the correct columns for the authority of the
requested Uri.
Save the operator name during network selection. The name will be used by UI to provide network selection notification. See bug 1414247.
modified: java/com/android/internal/telephony/PhoneBase.java
modified: java/com/android/internal/telephony/gsm/GSMPhone.java
When ro.telephony.disable-call is set to true the phone disable actual calls. It provides a way to test in user-debug builds for stability runs. See bug 2031157.
modified: java/com/android/internal/telephony/TelephonyProperties.java
modified: java/com/android/internal/telephony/cdma/CdmaCallTracker.java
modified: java/com/android/internal/telephony/gsm/GsmCallTracker.java
modified: java/com/android/internal/telephony/TelephonyProperties.java
modified: java/com/android/internal/telephony/cdma/CdmaCallTracker.java
modified: java/com/android/internal/telephony/gsm/GsmCallTracker.java
1. Convert the voicemail count of a VM notification from
BCD to decimal. That way the user will not be notified
of 16 new VM when there are only 10.
Ref: 3GPP2 C.S0015-B / 4.5.12 Number of Messages.
2. Allow VMN-95 notifications without "User Data" to be
processed. Only mandatory items for VMN-95 are
"Message Identifier" and "Number of Messages".
Ref: 3GPP2 C.S0015-B / 4.3.5 Voice Mail Notification.
Temporary rollback of this change, for now the radio can prevent data traffic,
but that's not the desired long-term solution.
This reverts commit 79ef673d56e2599932b8b7f13695d23b4df54d09.
During the time of OTA activation screen startup, the app needs
to get MIN by calling getCdmaMin(). The issue in current code is that
OTA app calls getCdmaMin() before framework gets MIN data from lower
layer.
To fix this issue, framework will be providing the following new APIs
to applications for checking if MIN data is ready:
1. isMinInfoReady():
Check if mMin variable in getCdmaMin() has been assigned a non-null value.
2. registerForSubscriptionInfoReady():
Apps uses this API to register for notification.
3. unregisterForSubscriptionInfoReady():
This API is used by apps to unregister notification.
Framework will be sending out the notification in the following situations:
1. when mMin is assigned a non-null MIN value;
2. When app calls register API and MIN is ready.
This indicates to the UI that the hangup command has been received by the
Telephony layer and passed down to the RIL, but we have not yet been notified
of a successful DISCONNECT.
Addresses http://b/issue?id=1659876.
SetupDataCall needs radio technology parameter to identify CDMA and GSM type. 0 means CDMA and 1 means GSM. The values are different from GSM_PHONE and CDMA_PHONE. Add authType parameter to identify PAP/CHAP authentication. Currently the authType is set to use both PAP and CHAP in CDMA phone.
modified: telephony/java/com/android/internal/telephony/CommandsInterface.java
modified: telephony/java/com/android/internal/telephony/RIL.java
modified: telephony/java/com/android/internal/telephony/RILConstants.java
modified: telephony/java/com/android/internal/telephony/cdma/CdmaDataConnection.java
modified: telephony/java/com/android/internal/telephony/gsm/PdpConnection.java
modified: telephony/java/com/android/internal/telephony/test/SimulatedCommands.java
When SMS is sent from a email address, Email Gateway server sends a string
containing from address, message text. Current code is treating the first
word as from_address, second word as subject and rest of the string as message_body.
Because of this second word is getting stored in separate variable and not as part
of message text, so second word is always lost.
Merge commit '0da3bdb476086db02a1076780676b21e239c79d6'
* commit '0da3bdb476086db02a1076780676b21e239c79d6':
Fix public API caused due to CDMA changes.
GET_SIM_STATUS now returns structure RIL_CardStatus. So RIL_SIM_* status are obsoleted.
modified: java/com/android/internal/telephony/RILConstants.java
