Adds support for a String[] return type in ViewDebug; and in addition to that,
the hasAdjacentMapping method can use the String array as means to map a key to
its value.
Adds DEBUG_VIEW_ATTRIBUTES to Settings so that the heavy per-view
computations only affect those who opt in. This setting is used in
CoreSettingsObserver to avoid impacting start time.
Change-Id: I8f507e4e5361414c30d247e8d9815205feb5e91f
Since we don't support mapping between android key and parameterized
cec keycode, remove parameter fields in HdmiCecKeycode.
Bug: 17099253
Change-Id: I8b6b6b361f0c343b0a263240b49e41bf289d36ca
Add a new setting to persist whether to show the IME when a hard
keyboard is connected.
Bug: 14066881
Change-Id: I2237ded850a0d4ab43ca441d0b7df13e0958e630
Previously it implied that the hardware keyboard would be disabled,
but really the toggle would just enable showing the IME even if a
hardware keyboard was present. Changed the string and swapped the
semantics to be more clear about the behavior.
Bug: 14066881
Change-Id: I9c8a7eb98b5277f1d09cc19fa7402e9b4cf51d92
There is a bug in how we deal with name overflows combined with resetting
the battery stats data. If we do a reset while a wakelock is being
actively held that has been put into the overflow bucket, then we can
end up reducing the number of known wake locks in the list so when after
that it is released we try to release it under its real name rather than
the overflow name.
This means we need to keep track of which wake locks have been placed
in the overflow bucket while they are actively being used, so we can be
sure to properly handle it as part of that bucket until it is eventually
released.
This makes things... somewhat more complicated. So now we have a class
to take care of all these details, and also use it for other places where
we have the same overflow semantics sync and job stats.
Also fix potential deadlock -- BatteryStatsHelper needs to call on to
ConnectivityManager to find out of there is telepohny, however we use
that class when doing a dump while the battery stats lock is held. To
fix this, we check the connectivity state up in the battery stats service
before acquiring the lock and propagate that information through to the
dump code.
Change-Id: Ib452206af5c36f4b0f03cc94d2845d36613d1ba5
It was being given the argument and just... ignoring it.
But the bulk of this change is to make replacePreferredActivity
better about replacing -- it now detects if the request will not
make a change and, in that case, just do nothing.
The reason for this?
It turns out that each time you install an app, the telephony
system is calling this function over 20 times to set the default
SMS app. This is almost always doing nothing, but before this
change it means we would re-write packages.xml over 20 times...!
There are definitely more improvements that can be made here (delaying
write of packages.xml to allow them to batch together, reducing
the amount of calls being made), but until then this is a big
improvement.
Change-Id: I02c4235b8ecd5c13ef53e65d13c7dc2223719cec
During animations, the wallpaper crop is the
union of the start and end crop. This prevents
the system bars from jumping to black when an
activity with opaque bars is launched.
Bug: 16441036
Change-Id: Ic0f3bc2e83b9830514a3456a27ae6f23716f3240
Generate an Android key event when a UserControl message is received.
And report menu state active when a MenuRequest message is received to
notify sender can send a UserControl message.
Bug: 16938007
Change-Id: Id8f393dc254508b9e7a6fa203f8e817fbe807e38
This class introduces two classes, MhlSendKeyAction and
HdmiMhlKeycode.
- MhlSendKeyAction is a feature action that manages MHL message
for RCP, Remote Control Pass Through.
- HdmiMhlKeycode is a collection of MHL keycode including keycode
mapping between MHL and Android keycode.
Bug: 16966459
Change-Id: Ib3f7229c71b66837cd0d239e5af1940dfccee7df
...with grantUriPermissions (no user interaction required)
Add a new path in to the activity manager to start an activity as
if it was directy started by the original calling activity. This
is specifically for the resolver activity and chooser activity to
be able to safely launch its data after serving as an intermediary.
Access to the new method is highly restricted -- it can only be
called by an activity that is declared in the framework apk itself,
and the execute-as-the-caller behavior will only happen if the
code is running under the system uid. (This means we could still
have these run in the client's process in some cases and still work
correctly.)
Note there is some commented out code here half-done about trying
to propagate security exceptions back to the original calling
activity. This would be really nice, especially now with the
chooser activity running in a system process so any errors made
by the app (bad permission grants, bad intents, etc) no longer
actually appear in the app so are essentially invisible. I'd
really like to figure out a way to propagate these exceptions back
to the app, but this is hard since the app's process may no
longer even be running at this point.
Also tweak activity manager dump output to split the recents
dump out from activities, since recents can now be super large.
Change-Id: I50410c4783faf9302c69290589a068a846e0973a
Move location selection logic into shared PackageHelper location,
and share it between DCS and PackageInstaller. Fix bugs related to
installed footprint calculation; always count unpacked native libs.
Have PMS do its own threshold checking, since it's fine to stat
devices. PMS only ever deleted staging ASECs, so move that logic
into installer and nuke unclaimed staging ASECs. Allocate legacy
ASEC names using PackageInstaller to make sure they don't conflict
with sessions.
Start wiring up session to allocate ASEC and pass through staged
container for installation.
Fix bug to actually delete invalid cluster-style installs.
Bug: 16514385
Change-Id: I325e0c4422fc128398c921ba45fd73ecf05fc2a9
It is wrong to turn the token into a null appWindowToken; we
need to create a new top-level token as if they had passed in null.
Change-Id: I870d8167c6ed456ea8fd58b149809ec9e0103bce
Instrumented the basic power manager state transitions,
calling into the Power HAL, setting the display power mode,
and setting the backlight.
Bug: 17004602
Change-Id: I4e362162ddfd7292a7eea8b5d029ce3f6593c4a9
Switch to using IntentSender for results to give installers easier
lifecycle management. Move param and info objects to inner classes.
Bug: 17008440
Change-Id: I944cfc580325ccc07acf22e0c681a5542d6abc43
- Persist the entire exit condition instead of only the id.
- Make downtime a proper condition provider (similar to the
existing countdown provider for time-based conditions)
- Move all downtime-related items out of ZenModeHelper and
into the new condition provider.
- Reevaluate downtime more often, when any of its inputs change.
- Make sure downtime appears as an available condition in the
condition panel when applicable.
Bug:16296125
Bug:16211189
Bug:17031767
Change-Id: I1d8269a4e6fe170ce776bf932dbbdfb29dd25dd7
We set the system_server classpath in the environment
(like we do with BOOTCLASSPATH). After the zygote forks
the system_server, we dexopt the classpath (if needed)
and then launch the system server with the correct
PathClassLoader. This needed several small / medium
refactorings :
- The logic for connecting to installd is now in a separate
class and belongs in the system_server.
- SystemService / SystemServiceManager have now moved to
classes.jar. They are only used from there, and since they
use Class.forName, we want them to be loaded by the
system_server classloader, and not the bootclassloader.
- BootReceiver now moves to frameworks.jar, because it is
used by ActivityThread and friends.
bug: 16555230
Change-Id: Ic84f0b2baf611eeedff6d123cb7191bb0259e600
Add logic to obtain the mtu from the network PCO parameter and set it to kernel
when the mobile data connection is established. When there is no PCO mtu configured
from the network, the mtu size defined in the corresponding APN will be used. In case
no mtu size is defined for an APN used for data connection, the MCC/MNC based MTU
defined in the framework overaly will be applied.
bug:17046179
Change-Id: I6465d4b8f2076aaa380ae3617fb3f24adbe136d4
Use Settings.Global instead of SharedPreferences (which don't work) to
track whether we've run the one-time provisioning step of activating
the build-time configured default scorer.
Bug: 16980605
Change-Id: I093cdd6f4f1110960078a186191c4e02b5543d6a
