The correct behavior for the light sensor is to immediately report a value
when it is enabled, so this change should not be necessary.
Bug: 5426212
This reverts commit 5dca30affc517879315b3a928c78756cbc9cf689.
...wallpaper first time IRK81.
We were monitoring for file creates when those are not needed, and
receiving the initial file create was causing us to be confused.
Change-Id: Iccd3b7492c82895dba87f25c4881c538f300d342
It is no longer sufficient to check the value of
internal.R.bool.config_showNavigationBar to determine if a
navigation bar (separate from the status bar) is shown on a
device, because the emulator needs to be able to override
this value (now possible by setting qemu.hw.mainkeys to "1"
or "0", for navbar or no navbar, respectively).
This logic is now contained in PhoneWindowManager, and any
clients wishing to know whether the system has a software
nav bar should consult the new hasNavigationBar() method.
Bug: 5404945
Change-Id: I119d32a8c84b88b2ef46f63244e7f11dc5de0359
A LayerScreenshot is a special type of layer that contains a screenshot of
the screen acquired when its created. It works just like LayerDim.
Make sure to call compositionComplete() after rendering into a FBO.
Bug: 5446982, 5467587, 5466259
Change-Id: I5d8a1b4c327f9973d950cd4f4c0bca7f62825cd4
The basic problem was that at some points during setup wizard, this would
happen:
1. The app's process is killed.
2. The app's process is restarted, but not to actually resume the
setup wizard activity, just to put it in the stopped state.
When doing this, the saved state is cleared but the app will
never provide a new one.
3. The app's process is killed again. At this point, because the
saved state is cleared, the activity is completely removed.
4. Eventually the entire activity stack becomes empty, and a new
setup wizard activity needs to be created as the home app.
There is a combination of bad stuff going on here.
First, why is the process being killed? At this point the setup
wizard is the home app, so it shouldn't be killed. There were two
reasons why this was happening:
- CryptKeeper still was not completely cleanly going away. To fix
this, I removed the check in the activity manager to not allow
an activity to finish if it is the only activity on the stack and
maybe-kindof looks like the home app. This really wasn't necessary
(we always take care of starting a new home activity if we find the
stack is empty), and outright dangerous with all of these things
purporting to be home but not.
- There was an issue in computing the oom_adj where the home app
would not be marked as "not hidden", and if we had to re-compute
its oom adj in the current sequence would then give it an
adjustment as a background process... and with all the processes
we spin through during boot, it quickly got down to background
#16 and killed.
Second, what is going on with the state? This is easier, the code
in the activity manager to create a new activity but put it in the
stopped state was still clearing the saved state. The saved state
should only be cleared when going in to the resumed state. When
going in to the stopped state, we can just keep holding the same
saved state.
Change-Id: I7d21cdcfa082d98ca70c79d9923e29605ee4353e
The TouchExplorer was not taking into account the case with incative
pointers while dragging. If one puts a finger down and then perfroms
a dragging gestore the explorer tries to inject UP event for the end
of the gesture upon every of the two dragging pointers going up instead
only for one the first went up.
bug:5476098
Change-Id: I20d2dd7bde7e016b0678a35d14cd068d9ff37023
The DPM seemed to always go through ExternalStorageFormatter to wipe the
device and SD card. For SD cards emulated on a fuse filesystem, this
seems to fail unless the device is wholly encrypted. Bypass
ExternalStorageFormatter in those cases and just wipe as normal.
Bug: 5458396
Change-Id: Iec759ef894c6bd3863cb4e7329f4de4584c60c1a
Only unbind once.
Also protection from removing a SpellCheckerBindGroup from mSpellCheckerBindGroups
if it is no longer the current entry there.
Change-Id: Ic585295dfae77eae101a611afbf116bc681290ad
A LayerScreenshot is a special type of layer that contains a screenshot of
the screen acquired when its created. It works just like LayerDim.
Bug: 5446982
Change-Id: I7814aff2380e7e146937f2b641907be2a30c76cc
This supersedes any backup-password that the user might supply. Per
design, the device encryption password is also always used to encrypt
the backup archive.
The CL introduces two new strings, used for prompting the user for
their device encryption password rather than their settings-defined
"backup password" when confirming a full backup or restore operation.
Bug 5382487
Change-Id: I278737927a4ecbb765bfb5ecfd28a4cb8dae52ef
...dev.bootcomplete flags is set before boot animation is out
Also:
- Fix crash in recent apps if the intent for an old app didn't
happen to have the new task flag set.
- Fix issue where a crash in system UI would cause the crash
dialog to be displayed below it, effectively locking the UI. Now
the crash dialog for persistent processes is shown above everything
else.
Change-Id: I0312001a92beeae5f644c7c3e5c5e19f6716df36
The window manager now uses the app screen dimensions to compute
the various configuration properties, as it should.
This means that prime is official a "not long" device. Poor prime.
It probably feels inadequate now.
Because it is.
Oh and all that other stuff? Debugging logs. Turned off. And
why the heck not, debugging logs are great.
Change-Id: Iaaf8ef270d986d34fd046d699ef4c0ecea1981fc
Bug: 5011907
Introduce a 150ms delay in handling volume down keys
while waiting to see if a power key will follow.
Don't trigger the screenshot chord if both volume up and
volume down are pressed together.
Don't trigger the long-press power menu if volume keys are
also pressed.
Require the user to press both keys in the chord within
the debounce time and continue long-pressing them in order
to trigger the screenshot action.
Change-Id: I248968d37b73c09d6d08e7f62667c443eba32da0
In touch exploration two fingers in the same direction drag and if one of them
goes up the other starts to touch explore. This however causes inadvertent touch
exploring to happen on almost every scroll causing confusion. Now two finger
drag and they should both go up to allow exploring. This way the inadvertent
exploring is gone and user experience is much better.
bug:5440411
Change-Id: Id8aaece92e5dea1fc740400d2adc9dd63a1674e4
This change merges the ISurfaceComposer::setOrientation functionality
into ISurfaceComposer::setTransactionState. It enables the window
manager to atomically update both the display orientation and the
position and size of the windows in a single transaction with
SurfaceFlinger.
Bug: 5439574
Change-Id: I18a8ccc564d7d760ef8afb2d015ccdb7a7963900
Consider a network over-limit when it's measured usage is within a
handful of MTU's, since kernel completely drops packets that trigger
limit alert.
Update notification drawables.
Bug: 5433359, 5224629
Change-Id: I10b19cc34c34b47775904229829a25208cd85d25
Although it's typical for a backup transport to report that it
needs an explicit initialization opportunity when the backup is
initiated, it can sometimes come to pass that the "needs init"
error condition is reported at backup *finish*. In this case the
framework side was failing to properly reset all of the relevant
state. The end result was to spin hard forever, holding wakelocks
and continually failing to actually perform the necessary init
operation, possibly continuing even after a reboot. Fixed.
Bug 5434579
Change-Id: If1d72c338526e4019ea524c48a11e71e44e77f71
...the "Complete action using" dialog
When an application goes idle, it sends back to the activity manager
the configuration it last used, to make sure the two don't get out
of sync. Fix a bunch of edge cases here in dealing with that, and
be sure to also send the current configuration when launching an
activity so the client is always up-to-date when launching.
Also a small fix to not show the upgrading dialog during first boot.
Change-Id: I14ed366a87cd689d1c78787369e052422290ac6f
Replace TrafficStats calls by reading values from xt_qtaguid kernel
module. To keep BatteryStatsImpl changes lightweight, cache recently
parsed stats. Tracks mobile ifaces from ConnectivityService.
Refactor xt_qtaguid parsing into factory outside of NMS. Add stats
grouping based on UID, and total based on limiting filters like iface
prefix and UID.
Bug: 4902271
Change-Id: I533f116c434b77f93355bf95b839e7478528505b
The PhoneWindowManager is now responsible for hiding and showing
the nav bar.
For hiding, it just moves it off the screen (easy way to get a
nice slide animation on and off). At the same time, we use a
new WM facility to put up a fake input window to capture all
touch events.
When a touch event is received, we force the system UI to clear
the navigation hiding bit so it will be shown again.
This removes a bunch of code from the system UI for hiding and
showing the nav bar. Also removes the code calling from userActivity()
to the system UI, which was bad. (Also no longer using userActivity()
fixes bugs around re-showing the nav bar due to key presses and
other wrong things.)
Change-Id: I8c3174873b5bcaa36a92322a51e8f7993e88e551
