Put enhancements on data stall polling logic in ICS so that
stall recovery can kick in earler while screen is on.
Bug: 5767897
Change-Id: I4683fc45c0161f4374749c8e5840261c19a48f77
Even if other people are sharing the connection (ie, carrier wants
default and tethered traffic on the same APN) stop using
a carrier-described APN when the tethering stops.
bug:5525764
Change-Id: I95ed2aaed4d79519d233a62cf2945edead8114bc
While BIP data call setup is still handled in RIL/Modem,
this patch is adding support of Alpha tag display on UI.
Alpha tag is optionally included in "OPEN Channel", "Close Channel",
"Send Data" or "Receive Data" command.
"Open channel" will be notified via RIL_UNSOL_STK_PROACTIVE_COMMAND
which requires TERMINAL RESPONSE based on user input.
"Close channel", "Send Data" and "Receive Data" commands
are send via RIL_UNSOL_STK_EVENT_NOTIFY just to display
transient notice.
Bug:5165510
Change-Id: I873e55274c860886bc816ce6fb07cb882d339214
Radio state reflects the state of the modem. SIM_READY, RUIM_READY,
NV_READY are subscription states and it is possible that the new cards
have multiple subscriptions. Remove the SIM states from Radio State and
introduce a new VOICE_RADIO_TECH message to identify the exact voice
technology. SIM states will continue to be identified from the
SIM_STATUS messages.
Change-Id: Ia67d54f43b6c3340d9cf5c27fcb6f7ef49ef4d40
Old code would detect we were in a retry loop and ignore other active
connections we could share. We really want live shared connections to
dominate over retrying disconnected ones.
bug:5525764
Change-Id: If93383c52024113eec595b31e46897d1fcabc44c
This looks to fix a problem where the nv_data.bin file
file gets corrupted. When greping a radio log for "md5" if something
like following is seen:
RIL(s) : load_md5_state: MD5 state 1
RIL(s) : check_md5:
RIL(s) : compute_md5: path /efs/nv_data.bin
RIL(s) : check_md5: MD5 fail. orignal md5 '628647a8e5c6cac2d586199417c0103c' computed md5 '58a635cbaf5fe4ffb2797aeaa2b32709' (rild)
RIL(s) : check_md5:
RIL(s) : compute_md5: path /efs/.nv_data.bak
It means that corruption was detected and a back version was used
which is ok. Apparently that backup version can have the default
network type revert to 2G only thus causing the symptoms reported
in b/5695729 where after taking an OTA 2G becomes the default.
By calling setCurrentPreferredNetworkType when the sim is ready we
can reset the the network type to 3G.
Note: I also tried calling setCurrentPreferredNetworkType in
EVENT_RADIO_AVAILABLE but that didn't work and we would see
the response to setPreferredNetworkType failing as the ril wasn't ready.
RILJ : setCurrentPreferredNetworkType: 0
RILJ : [0004]> REQUEST_SET_PREFERRED_NETWORK_TYPE : 0
RILJ : [0004]< REQUEST_SET_PREFERRED_NETWORK_TYPE error: com.android.internal.telephony.CommandException: RADIO_NOT_AVAILABLE
Bug: 5695729
Change-Id: Ibbd29cda0b201a8c08f4dcfa5cec211611e1d599
According to TS 22.030 6.5.2 "Structure of the MMI", the dialing number
can not end with #. The format is like *SC*SI#DN. Correct the mmi pattern
to exclude DN# case. With this fix, processCode() will tread *NNN#DN#,
e.g. *400#16 digit number# in bug 5622718, as USSD and send via
RIL_REQUEST_SEND_USSD.
bug:5622718
Change-Id: Ifc8d0edff4308602a5f3fc651cf116bf6bad3cbc
A request for a DUN connection should only use the carriers requested dun connection. Don't
share another connection unless it matches the carriers settings.
bug:5701374
Change-Id: I75a65fcfce1b218bd9ca4ce2ab85cbe850813321
Don't report that we're disconnected immediately if we're disconnecting when another
disconnect comes in. Remove this behavior from the default handler and add a catch
all "yeah, we're disconnected already" to the inactive state.
bug:5568633
Change-Id: Iff7ccde2069b47f8ad8255f3bca0292b80041388
Secondary nets sometimes come up with no routes, but parsing errors end up with null
routes getting added. Trim that away. Also added some dumpstate logging of the secondary
route tables and rules.
bug:5615697
Change-Id: I94c9d888bab958df44891b9117236436e046cc7f
CallerInfo.doSecondaryLookupIfNecessary() was assuming that SIP addresses
would always contain the character '@', but that's not always true since
the username/domainname delimiter can actually be "%40" (the URI-escaped
equivalent.)
This would cause the in-call UI to crash if you ever called a SIP address
like "xyz%40example.com".
TESTED:
- Make an outgoing call to the SIP address "xyz%40example.com"
==> The call ultimately fails, but the in-call UI no longer crashes when
it first comes up.
Bug: 5637074
Change-Id: I62d15a7ccd509924d38b780b92e657b9efa26125
Fix a NullPointerException when sending a single-part SMS containing
characters in one of the enabled national language tables.
Also added a few log messages for several error cases to help with
debugging any future problems in the SMS dispatcher.
Bug: 5553544
Change-Id: I61c1cbe297b2e222027f0db7c833df6a03c2974a
Initially set to 3 minutes this raised the standby current
by 12.5% so changing to 6 minutes.
Bug: 5534004
Change-Id: I602f5fe4de35d0db2dbacf0c615c300c57dd2d0d
1. Fix the ClassCastException while handling spec out 'Setup menu'
-Ghana MTN simcard and JDI simcard sends abnormal 'setup menu'cmd.
-Those 'setup menu' is spec out.
-At the end of the proactive cmd,extra bytes '0x00 0x00 0x00 0x00' is
followed.
- That cause ClassCastException and phone crash.
Bug: 5574160
Change-Id: Ieafb6c4efd94bb4e2a39a04612a6761c958654bb
Signed-off-by: dujin.cha <dujin.cha@samsung.com>
For devices with both CDMA and GSM stack, ConnectivityService only
connects with the GSM variant. Making this flag static communicates
the policy state between all DCT.
Bug: 5586935
Change-Id: Iff0384027303470dd382d5173558d2d091ce4bf6
- Precondition: config_sms_enabled_single_shift_tables is configured as
1 (Turkish) in frameworks/base/core/res/res/values/config.xml
- Cause: There is no consideration for National Language Shift Tables in
SmsMessage::fragmentText function.
- Solution: The header length is calculated properly according to
National Language Shift Table
- modified to add test cases and fix calculation bug (jhamby@google.com)
Bug: 5553544
Change-Id: I9eaefbbd6b3d75f8c41cbf9d0cb03a701cfa1cb3
While offhook, even the call is on hold, setAudioMode() remains in
MODE_IN_CALL (or MODE_IN_COMMUNICATION for SIP) rather than
switching back to NORMAL.
bug:5546901
Change-Id: I0189dc010d1109895cc38e17b1b80418445d514a
Also use the AlarmManager instead of messages so the delays
are consistent whether sleeping or not.
Bug: 5534004
Change-Id: I24118b30214dddf8183c1200a89555d6c528e606
When enabling/disabling SMS cell broadcast channels, we were not calling
setGsmBroadcastActivation() with the correct value after updating the
message IDs. It should be called with true if any message IDs are enabled,
or false if the list is empty.
Added an isEmpty() method to IntRangeManager, and moved the call to
setGsmBroadcastActivation() in SimSmsInterfaceManager to the end of the
enableCellBroadcastRange() and disableCellBroadcastRange() methods,
where it sets the correct value using the new isEmpty() method to test
if there are any message IDs enabled after updating the range list.
Bug: 5525441
Change-Id: I7d1ebd54dacf1de20910947efbf5e87e1957fd1a
To allow a operator test to pass we need to manually select
a network. Therefore getAvailableNetworks needs to be implemented
on CDMALTEPhone so that RIL_REQUEST_QUERY_AVAILABLE_NETWORKS is
sent to the RIL/radio.
Bug: 5420630
Change-Id: I8e138b211d42755399a9e30f3e45dde2f579401e
Devices supporting IMS may receive SMS-PP data download messages
which are normally handled in the radio baseband. Add support to
framework for these messages, passing the data to the UICC and
sending the response data as part of the SMS ACK.
Change-Id: I1da76982c6f8c402f82a6f535591e614f4e0de18
The USIM application on the UICC contains an EF for the USIM service table,
a byte array containing a bit field of available services on the USIM.
IccServiceTable is an abstract class to manage a byte array containing a
service table and map it to human-readable enum values defined in the
subclass, e.g. UsimServiceTable. The availability of a service can be
tested with isAvailable(), which is implemented in the subclass to take
an enum, e.g. UsimService, as a parameter, and passes the ordinal to the
generic isAvailable() in the parent. IccServiceTable also provides a
toString() method that returns a human-readable list of enabled services.
The ISIM application for IMS contains a similar ISIM service table.
This can be supported with a new IsimServiceTable class in the future.
Change-Id: I9c3134672ed306e297dd35d633235cffca510aad
On an LTE device where incoming SMS messages over IMS are sent to
the framework via RIL_UNSOL_RESPONSE_NEW_SMS responses sent to
the RIL, it may be necessary to process USIM data download SM's
(message class 2). This requires the RIL to implement two new requests.
1) RIL_REQUEST_STK_SEND_ENVELOPE_WITH_STATUS:
send an ENVELOPE command to the UICC, receiving the SW1 and SW2
status bytes in addition to the command response.
2) RIL_REQUEST_SMS_ACKNOWLEDGE_WITH_PDU:
send an RP-ACK or RP-ERROR acknowledgement to the incoming SM,
including an acknowledgement PDU containing the envelope response.
Change-Id: If597a14fa8c4780c75da84fa96c49abcb05960f2
Fixed onApnChanged method to handle multiple APN scenario.
Non-default links also needs to be cleaned up once telephony db
is updated.
Bug: 5333303
Change-Id: I6d8d2b4e2f5b07ebf0e22669c910e4ebaddfe392
Do not override CdamServiceStateTracker#getOtasp as we
should report the "real" status as OTASP can be needed
for LTE.
Bug: 5413788
Change-Id: Ia34c9e1169bfc9682f81f9c4935eb2853507bd04
