1. The NumberPicker was showing the IME if the input field
gets focus and hiding it when the the arrows are pressed.
The leads to a nasty behavior when the input is the first
focusable and the uses presser an arrow button. In such
a case the IME shows and hides on every arrow press pushing
the window content up and down - this looks pretty ugly.
Now the IME is show on double tap of the input field.
2. The NumberPicker input now by default has an IME action
done, hence after editing it the IME goes away.
3. The NumberPicker input now clears focus when it gets
IME action done, so the last picker in a sequence
does not show selection which is focus driven.
4. NumberPicker was incorrectly detecting double tap to
begin edit and it was possble to start edit on singe tap
if the user has double tapped before to start an edit.
Now double tap detection is using the double tap timeout
correctly.
bug:6071977
Change-Id: I0ff5a491064e51663b3abec675d839d0a65b986a
For kiosk-type devices that do not present any navigation UI. This allows
for clean selection of the implementation based on resource overlays,
without the need for the tablet or phone status bar implementations to
accomodate the desired behaviors.
Bug 5824373
Change-Id: Ia5aca7df70a11e632eaf9be6e67900ded8ea2f7d
This is a grotesque hack to avoid showing status bar controls. The real
solution will be coming via master but not extremely soon; stay tuned but
this gives the right presentation for now without affecting normal products.
Bug 5824373
Change-Id: Ib5348024853ad2e7715b824aba522d80b6a99048
Since CDMA doesn't use APN settings there was no place to say what a cdma
device's DUN connection would support, so by default normal device
originating traffic would be blocked on a tethering single-connection device.
With this change you can (via overlay) say that it supports everything
so mms and on-device browsing/email will still work even when on a dun connection.
The reason to allow both: some carriers will charge per byte for dun access
and so they don't want lots of non-tethering traffic used (costs the user alot)
but other carriers just use a dun connection to limit access to tethering, but
once there give unlimited data, so it makes sense to support everything there.
bug:5972599
Change-Id: I78fd7f3ac63c51a0560b659ed5ec219b10a93f8d
This patch is adding a capability so that OEM can override USB mode
in case the device is boot up with OEM specific mode. (i.e. modem
debug, factory test etc.)
Bug:5964042
Change-Id: Ic8e23d302563ce71eedb74ce94cca8c65838a4f7
* commit '0b2701b7344fb7b7b6f9a1c1c99c8ede81b49d2d':
docs: change that stated as a few doc fixes and turned into fully documenting the device default themes and fixing many more, including adding API level information for older themes to avoid confusion. Oh and fix an unclosed <em> tag causing a format bug.
fully documenting the device default themes and fixing many more,
including adding API level information for older themes to avoid confusion.
Oh and fix an unclosed <em> tag causing a format bug.
Change-Id: Ia4b33559bd5ad2cbae8b53966999cf7f5038b125
incorrectly specified.
This affected search bars and alert dialogs spawned from activities
using Theme.DeviceDefault.Light as a base.
Change-Id: I219d38d486498db5b4b283560256afd7d6051535
- cherry-picking framework CLs from master into ics-mr1 that are
needed for FU to work on tablets
- needed for OEM partners even FU isn't going on xoom
Squashed commit of the following:
commit 3258f2528f558efdaf34ae15c5425f2d879848fe
Author: Brian Colonna <bcolonna@google.com>
Date: Tue Dec 13 15:49:48 2011 -0500
Added Face Unlock to tablet lockscreen layouts
The Face Unlock Area was not part of the tablet layouts, so prior to
this change, Face Unlock would not show up on tablets when selected as
the unlock method. The backup unlock method would show up instead.
The goal here is for the pattern and PIN unlock layouts (in both
portrait and landscape mode) to look the same as before this change.
This was a little harder than it was with the phone layouts for two
reasons:
1) For the phones it was ok for Face Unlock to be sized such that it
just covers the backup method. For the tablets we want Face Unlock
to cover far more real estate.
2) The phones were based on a grid layout, whereas the tablet is a
linear layout.
Note that the diff makes the modifications look way more extensive
than they actually are. Basically, in most cases I am putting a
relative layout around some existing portion of the layout and
putting the Face Unlock Area area inside of the new relative layout.
Change-Id: I478becddf2a9ee9fe7b6d653e604fa3ad89b822f
commit 821cfe85cf2b3daf074d9749dbf6e0a5663af0de
Author: Brian Colonna <bcolonna@google.com>
Date: Mon Dec 19 15:51:10 2011 -0500
Unbinding from FU when going to backup
Lockscreen was stopping Face Unlock when going to the backup lock, but
not unbinding from the Face Unlock service until the device was
unlocked.
This caused a bug on the tablets where Face Unlock would reappear when
switching between portait and landscape orientations, even after the
backup lock was exposed. On an orientation change, Face Unlock is
restarted if the service is bound to during the orientation change.
Since it was bound to when it should not have been, Face Unlock was
restarting when it should not have been.
The wakelock is also now being poked on an orientation change because
on the tablet you can keep Face Unlock alive by switching the
orientation back and forth, but eventually the screen would go dark
with Face Unlock running.
Also, a conditional was moved in activateFaceLockIfAble() so the whole
section isn't executed if Face Unlock is not in use. Part of it was
being executed with only the inner-most part having the check. This
did not cause any issues that I am aware of.
Change-Id: Ib452b8ced28a507bf9272dbf5d3477a8abd1ba90
commit fa90bb76ac6b311d12b55d23df4ac44cec62c7b3
Author: Brian Colonna <bcolonna@google.com>
Date: Mon Dec 12 18:02:23 2011 -0500
Changed how Face Unlock coordinates are specified
Was using View.getLeft() and View.getTop() to specify the upper-left
corner of the Face Unlock area. That gives coordinates relative the
view, which was fine for the phones. For the tablet it needs
coordinates relative to the window (which still works for the phones).
Also fixed a 'bug' where h and w were swapped. However, it wasn't
causing a problem because it was swapped in two places.
Change-Id: I86c1f68439f1dcef826cfe6b8fb56c9a4a6b8dc3
Change-Id: I962c0486be85949e002b0a2701286a6a39251f36
The idea is that this is a device which is more-or-less headless. It
might have some limited interaction capabilities, but it's not something
that you want to rely on having.
Change-Id: Icc9f674299f8dbe2b736a5622a4965904d27e49c
The ICS navigation guidelines state that the OK action should be to the
right of the cancel action in UI dialogs. Update the SIM PIN unlock and
SIM PUK unlock layouts to swap the OK and Cancel buttons (for soft keypad)
and the OK and Emergency Call buttons for the physical keyboard landscape
layout.
Bug: 5730977
Change-Id: Iaf565bc2b584292a34f5a72a7a763003f9149f27
Fixed a problem where the key up for the ALT or META key was not
delivered to the task switcher dialog because it was deemed
to be inconsistent with the window's observed state. Consequently
the dialog would not be dismissed when the key was released.
Moved global hotkey handling for META+* shortcuts and ALT/META-TAB
into the window manager policy's interceptKeyBeforeDispatching
method. This change prevents applications from hijacking these
keys.
The original idea was that these shortcuts would be handled only
if the application did not handle them itself. That way certain
applications, such as remote desktop tools, could deliberately
override some of these less important system shortcuts.
Unfortunately, that does make the behavior inconsistent across
applications. What's more, bugs in the onKeyDown handler of
applications can cause the shortcuts to not work at all, for
no good reason.
Perhaps we can add an opt-in feature later to enable specific
applications to repurpose these keys when it makes sense.
Bug: 5720358
Change-Id: I22bf17606d12dbea6549c60d20763e6608576cf7
Bug: 5721663
Added content descriptions and made the listview allow navigation between nested
views.
Change-Id: I69d78d65e1bab829f63c2e6025051206e511f00f
HDMI audio hotplug is treated as a "headset" in the audio services. When a headset is unplugged,
WiredAccessoryObserver sends an AUDIO_BECOMING_NOISY broadcast so that applications can take
appropriate action (e.g. pausing audio if headphones were unplugged).
However, on Tungsten, when you unplug HDMI audio, the Music2 service was getting the NOISY intent
and pausing the transmitter media player. We could add Tungsten-specific code to Music2 to
disable this behavior, but it's probably better to disable this broadcast entirely because
applications on Tungsten probably shouldn't treat HDMI hotplug in the same way they treat
headphone hotplug on phones.
Change-Id: I2d2b913f74f51fb496bd2f00f32e109bbff01fa1
