The core logging in BackupManagerService and in the Google backup transport are
still enabled at this point.
Change-Id: I10abfa565bbd1097dd3631051b6aca163e4af33a
If not these system services will end up with inconsistent settings files
when the device runs out of storage.
Delete mangled settings file in PackageManager if the current write fails
so that we don't end up overwriting the backed up version with the
mangled version
Include null check when retrieving fwd locked resource for an existing package
I think when we were scanning the updated app in the system image,
from an older version on the data partition, we were not setting
the existing package to have the system flag, so not auto-granting
any new permissions.
This also includes some other cleanup in the package manager to
remove old files in various places, and tighten up logging.
Also similar logging cleanup elsewhere.
Change-Id: I6d113c7cf7e736ab9be512d6d7c94c806a24199a
* changes:
Only re-initialize backup state if @pm@ metadata is missing, to defensively work around a still-mysterious bug where the list of saved packages ends up being empty even though we still have state pending. If we do re-initialize, then wipe all state to make sure the right thing happens.
to defensively work around a still-mysterious bug where the
list of saved packages ends up being empty even though we still
have state pending. If we do re-initialize, then wipe all state
to make sure the right thing happens.
Don't keep open journal files -- close them after every update.
A bit less efficient, but possibly more reliable (again, this is
defensive programming here). Also change "rwd" to "rws" mode
for fully synchronous operation.
* changes:
- make SyncManager get the accounts list during the constructor, which will allow syncs to be scheduled during bootup. The providers need this so that they can potentially schedule syncs while they are starting up. - make the SyncManager message handler wait until boot has completed to start dispatching messages
which will allow syncs to be scheduled during bootup. The
providers need this so that they can potentially schedule
syncs while they are starting up.
- make the SyncManager message handler wait until boot
has completed to start dispatching messages
We already had a delay if we were associated, but we have some race conditions
we think will be masked if we delay the driver stop for the other cases
too. Don't wait as long (2 min instead of 15).
bug: 2147260
on success, record "backup_initialize" event; on failure,
record "backup_transport_failure" event (and add tags to
"backup_transport_failure" events that aren't associated
with a particular package -- namely "(initialize)" and
"(finish)").
Now that we can have a non-app-window cross-wallpaper animation,
we need to make sure to not access a null app token.
Change-Id: Ia00debd4b2b431d15bd074927a9035e1bc0a6445
The APIs for checking whether keys are held down now also look
at virtual keys.
However it turns out there is less than a second between the time we
start the input thread and check for safe mode, so there is not enough
time to actually open all of the devices and get the data from them
about the finger being down to determine if a virtual key is down.
So now you can also hold DPAD center, trackball center, or s to
enter safe mode. Also give some vibrator feedback.
Change-Id: I55edce63bc0c375813bd3751766b8070beeb0153
If a backup pass had been skipped (either because the transport was unavailable
or -- in a common case! -- because there was simply no work pending when the
periodic backup check fired), we were forgetting to reset the "backup currently
in progress" flag. Once we'd done that, the device would *NEVER* perform a
backup until it was rebooted, since it would forever think that there was one
currently in operation that must not be interfered with.
Change-Id: I0d6d7375dc6de99b599222a449934e70fe13ebb9
This was introduced when I did the fading of the lock screen,
which relies on setting the policy visibility of the windows behind
it to be hidden. As a result, when the orientation changed or
the activity was restarted, they wouldn't be resized or reported
as drawn, and the activity manager would wait until its timeout
before unfreezing the screen.
We now have a new method on WindowState to find out if a window
has drawn itself, which is used in the appropriate places.
Change-Id: If05f8b1947d3029917f62ad0f89b43544bd0a4dc
Also trigger low battery when battery reaches the specified level
rather than when it drops below the level.
Fixes bug b/1788656
Change-Id: I81f5cbb9892fc6574320d92e153211f83c69f415
Signed-off-by: Mike Lockwood <lockwood@android.com>
The TelephonyRegistry service crashed badly in the generic build, because
there is no system property to tell if the phone is GSM or CDMA. Adding a
simple null check solves the issue and allows the system to boot properly.
- The lock screen now fades in and out.
- Fixed a bug where we would accidentally freeze the screen when switching
to an activity with a different orientation than the current (but
the screen itself is in the current orientation). This would mess up
the animations on the car dock.
- New API to force a particular animation for an activity transition
(untested).
- New wallpaper animations.
- Resources now uses the next API version when in a development build,
to help applications being developed against such builds.
Change-Id: I2d9998f8400967ff09a04d693dc4ce55f0dbef5b
* changes:
Fix bug 2129190 The context used by the status bar (i.e., the system context) was not properly initialized to have the right ApplicationInfo inside its PackageInfo. This eventually caused it to believe that it was running at 160dpi.
The context used by the status bar (i.e., the system context) was
not properly initialized to have the right ApplicationInfo inside
its PackageInfo. This eventually caused it to believe that it
was running at 160dpi.
Kudos to Dianne for figuring this out.
* We now check for in-progress backups when asked to perform one, and don't
bother firing off another one concurrently (nor do we adjust the scheduling;
after all, someone asked to do a backup "now" and we're doing one, so we are
in line with expectations). We also defer backup passes while a restore is
in flight, and abort attempts to perform a restore during a backup pass.
* When a backup attempt fails, we now ask the transport how far in the future we
should put our retry. Previously we were simply not bothering to consult with
the transport, so we would wind up retrying backup while network connectivity
was known to be down, etc.
Change-Id: Ic7758010b74e06e90c50d46b7b0dd01b17af7c90
Turning off backup in the Settings UI constitutes an opt-out of the whole
mechanism. For privacy reasons we instruct the backend to wipe all of the data
belonging to this device when the user does this. If the attempt fails it is
rescheduled in the future based on the transport's requestBackupTime()
suggestion. If network connectivity changes prompt the transport to indicate a
backup pass is appropriate "now," any pending init operation is processed before
the backup schedule is resumed.
The broadcasts used internally to the backup manager are now fully protected;
third party apps can neither send nor receive them.
(Also a minor logging change; don't log 'appropriate' EOF encountered during
parsing of a backup data stream.)
Lot of infrastructure for more things to go away when "clear system dialogs"
happens, and now do this when we turn on the lock screen.
Change-Id: I567130296fe47ce82df065ed58ef21b37416ceaf
- New meta-data you can add to a dock activity to have it launched by the
home key when the device is in that dock.
- Fix a deadlock involving ActivityThread's internal content provider lock.
- New window flag to have a non-secure keyguard entirely dismissed when a
window is displayed.
- New WindowManagerPolicy APIs to allow the policy to tell the system when
a change it makes during layout may cause the wall paper or
overall configuration to change.
- Fix a bug where an application token removed while one of its windows is
animating could cause the animating window to get stuck on screen.
Change-Id: I6d33fd39edd796bb9bdfd9dd7e077b84ca62ea08
This allows us to support binary proximity sensors that only return 0.0 and 1.0
Change-Id: Ifaf3a4e6fc720cb246ac3558e3e733b4b612c95b
Signed-off-by: Mike Lockwood <lockwood@android.com>
* changes:
Make IBackupTransport.finishBackup() also return an int code, since it too can return TRANSPORT_NOT_INITIALIZED (in fact that's typically how it comes).
Add API to skip the animation for a particular start activity, so that
a latter better one can be used.
Fix Theme.NoDisplay to actually work.
Fiddle with various animations: don't do a different animation for task
switching, try a scale animation for switching in/out of the wallpaper.
Adjust the animation duration so that at normal speed we have something
more like the slower animation option (so slow is now the default).
Change-Id: Ieba9f3db0bd9a762a19b327a3ecccbc7b547893d
return TRANSPORT_NOT_INITIALIZED (in fact that's typically how it comes).
For consistency, make other IBackupTransport methods return int instead of
boolean, and handle accordingly.
Make initializeDevice() its own method instead of a flag on performBackup().
This will be needed when un-checking the settings box anyway, and is
conceptually unrelated to whatever happens to be the first post-initialization
backup we perform. (Note that even if the init is sent separately from the
backup operation, the server will remember that an init has been done and
will *not* return NOT_INITIALIZED for the subsequent backup.)
Fix LocalTransport accordingly (trivial changes).
Handle failures more robustly in BackupManagerService -- most notably,
doQueuedBackups() was ignoring the result code of processOneBackup(), so
a NOT_INITIALIZED error would go past unseen (at least until the next
backup pass). Keep track of error code returns more universally now.
(This includes finishBackup(), of course.)
