Add a new hidden method to recovery system to trigger a factory reset
followed by a shutdown, rather than a reboot back to the regular
system. Use this flag when the MASTER_CLEAR intent is broadcast with
a boolean extra "shutdown" set to true.
Change-Id: I2ceb25b715d9f0ef492a75b3d287d1e17cec89ef
This is a start and two tests succeed:
Tested expired AT&T SIM and waiting 15min for alarm to fire.
Tested a provisioned Verizon SIM and works normally.
I've NOT tested AT&T where I've properly completed the provisioning.
I've NOT tested T-Mobile SIM either provisioned or not-provisioned.
I've NOT tested provisioning over WiFi.
I've NOT tested that WiFi <-> Mobile works
I've NOT tested voice calls, SMS, MMS
...
The current bug is below, but it is poorly named either it should be
renamed or a new bug created.
Bug: 13190133
Change-Id: I0a09f642614cd27a8655e9dae764b8999ce485b8
Adapted from change I44ce250e, "Maintain binding to crashed
listeners from NotificationManagerService.":
> This fixes the logic on the death handlers for notification
> listeners, and doesn't unbind from the listener services so
> that the system will bring them back up again.
Bug: 12587702
Change-Id: I41d0c6733046ee9760bcfae4407e754592b805ea
A VPN can once again bring up a new tun interface while the old tun is
running. Once the new tun is set up the routing rules will be removed from the
old tun. It is up to the application to drain the old tun of traffic and
close it.
If the new tun fails to come up the old tun will remain untouched and
can still be used.
To prevent leakage the new rules are added before the old tun is
shutdown. Netd/Dns has been changed to allow multiple rules to exist
at once with the most recently added rule taking priority.
Bug: 12134439
Change-Id: I7e00c7c68cc339d81f09b3d2a33276ffc76985f5
With netd allowing overlapping rules for uid range rules the interface
name is needed to make sure only the correct rule is removed.
Bug: 12134439
Change-Id: I94f77f154f49ca8d5f6cf49683a4473cc92c3eb7
When Intent.FLAG_ACTIVITY_REORDER_TO_FRONT was set the TaskRecord
member frontOfTask was being set true incorrectly for the top
activity. It should only be true for the bottom activity. This fix
ensures that frontOfTask is always set correctly for all activities by
consoldating it into one method.
Fixes bug 12171535.
Change-Id: If982dad3c81b2b816adc5d89e7e0496923098a70
For managing the ui mode, consider the device to be a television if it
has either the FEATURE_TELEVISION or FEATURE_LEANBACK system features.
When leanback is available for non-television devices, we need to
reconsider the use of these features for setting the television ui mode.
Change-Id: I7b82372ce19067e010be9b42111816bab186f95b
The value for the TCP initial receive window comes from,
in order,
kernel
/proc/sys/net/ipv4/tcp_default_init_rwnd
init.rc (via properties)
net.tcp.default_init_rwnd
properties
net.tcp.default_init_rwnd
gservices
Settings.Global.TCP_DEFAULT_INIT_RWND
Bug: 12020135
Change-Id: I0e271be19472900fa9f3bab037d53383ec014a9e
This is a cherry-pick of https://googleplex-android-review.git.corp.google.com/#/c/399886/
Instead of storing a kb layout per device descriptor (which is expected
to be unique), store it for each vendor/product. This way we can keep
a consistent layout between identical but physically different keyboards.
There are some corner cases this is expected to fail on, namely devices
that incorrectly have the same vendor/product id. Devices that don't
define a vendor/product id will continue to use the descriptor to store
layout files.
Change-Id: I1f2508561992080459310d5a644dad65a9c24f1a
The activity manager needs to set launchedFromPackage to be that of
the previous package in the case where flow has been redirected
through an intermediate activity.
Change-Id: I678fc2e7d984991ac715251a784ba7d7ccbf9fca
Under certain circumstances, the power manager might continue to
hold the display wakelock long after the display had been turned
off due to the mDisplayReady flag having an incorrect value.
1. An inverted conditional caused DisplayPowerState to incorrectly
signal the screen on ready state.
2. The DisplayPowerController failed to clear the block screen on
flag in the case where the screen was turned off before it became
unblocked from turning on. This could happen when the display was
rapidly turned on-off-on-off.
Bug: 13248135
Change-Id: I8faa3034695c83c8cd35613d81acccf40d22128d
Under certain circumstances, the power manager might continue to
hold the display wakelock long after the display had been turned
off due to the mDisplayReady flag having an incorrect value.
1. An inverted conditional caused DisplayPowerState to incorrectly
signal the screen on ready state.
2. The DisplayPowerController failed to clear the block screen on
flag in the case where the screen was turned off before it became
unblocked from turning on. This could happen when the display was
rapidly turned on-off-on-off.
Bug: 13248135
Change-Id: I8faa3034695c83c8cd35613d81acccf40d22128d
The window manager and view hierarchy currently disable all drawing
when PowerManager.isScreenOn() returns false so no drawing occurs
while dozing. This will be fixed in a future patch to take the
display blanking state into account correctly.
This patch is a workaround to unblock development in the meantime.
Bug: 13133142
Change-Id: I2dc0b422c77285e657d73adca2606aa68264d987
We'd otherwise leave the data dirs & native libraries
lying around. This will leave the app permanently broken
because the next install of the app will fail with
INSTALL_FAILED_UID_CHANGED.
Also remove an unnecessary instance variable.
Cherry-pick from master
Bug 13416059
Change-Id: I1e644aab74d5ea519231800915b39c2f55d043ae
Since Kitkat, an app pre-loaded under /system/priv-app/ has
FLAG_PRIVILEGED. However, if the app updated and the device
rebooted, privileged flag is unset from pkgFlags. This patch
fix issue to assign privileged flag when scanning the updated
packages.
Bug: 12640283
Cherrypick from master.
Change-Id: I833d94cd911693c9291e8204f63bd8de945dbba6
SO_BINDTODEVICE is not needed with policy routing.
SO_BINDTODEVICE was also used on the default iface which causes problems
when the default iface is IPv6 only and the socket tries to connect to a
IPv4 address.
Bug: 12940882
Change-Id: I5b2bde0ac5459433fc5749f509072a548532f730
We're getting signals from the radio and it sometimes drops out for
a while. This change will delay applying an empty country code
for 15sec but apply non-empty country codes immediately. It uses a
sequence number so we only apply the most recent change, even if
it's delayed.
Also secures the wifi call to set the country code as we can't
allow apps to set it willy-nilly.
bug:11062898
Change-Id: I610039a833e26d4c5c8b7b9ac1b7546f3c83446a
...broadcasted repeatedly at every boot time
Remember the last done pre-boot receivers, so that if we have
a new pre boot receiver appearing (without the platform version
changing), when we re-write the file of done receivers it will
contain all of them, not just the new one.
Change-Id: I4ed3478edc549d4b023ec4b3719111bc4d970ae4
Permission denied when trying to launch an activity from a notification
We don't remove pending intents when updating an app, which is necessary
to keep app widgets and other things working. However, when uninstalling
an app, we should clear out all of its pending intents.
Change-Id: I95067b31098115b5a7b127766fd093750063bbb8
This change fixes two problems - first, if you rebooted phone after
turning on Airplane mode, Wifi controller goes to ScanOnly mode which
may end up in Wifi radio transmissions. Secondly, because of this
incorrect state, the state machine doesn't turn on Wifi once Airplane
mode is turned off.
bug: 11409692
Change-Id: I55b4a5352a72a9c783e1b9891dd5363434585fb0
