Settings.Global namespace. Also run as a system app, since only system
apps can change airplane mode.
Change-Id: I317f9c94361cfca182356fd292e5b0b41553d1ab
When a user is removed, migrate all network stats belonging to that
user into special UID_REMOVED bucket. Also removes those stats from
kernel to avoid double-counting if another user is created.
Bug: 7194784
Change-Id: I03f1d660fe3754566326b7749cae8068fc224ea9
Callers with INTERACT_ACROSS_USERS_FULL permission can now observe content
for a given user's view (and can notify content uri changes targeted to a
specific user). An observer watching for UserHandle.USER_ALL will see all
notifications for the given uri across all users; similarly, a notifier
who specifies USER_ALL will broadcast the change to all observers across
all users.
The API handles both USER_ALL or USER_CURRENT, and explicitly forbids
any other "pseudouser" designations.
This CL also revs the Settings provider to notify with USER_ALL for
changes to global settings, and with only the affected user's handle
for all other changes.
Bug 7122169
Change-Id: I94248b11aa91d1beb0a36432e82fe5725bb1264f
Send package name, version code and the uid of the application requesting the
install to package verifiers.
Bug: 7164155
Change-Id: I2464dc5d4551f60b4f38f7982495a8920c83e1cd
Oops. Stacked bugs: first, the desired user handle was not properly
being passed from the call() entry point to the database operations;
then on top of that, the client-side cache management was still
looking in the local user's cache for the data, so a request to read
a different user's settings would return the local user's instead if
that key was already known to the local user's cache.
Reads and writes of a different user's settings are now uncached,
so they're relatively much slower. They're rare, however, so this
is not something to worry about unless we encounter a real world
case where it's a significant factor.
This CL also adds a bit of cross-user settings read/write testing
to the existing provider suite. These new tests caught both the
known wrong-user-write bug and discovered the client-side cache
bug, so yay.
Finally, the existing wholesale mutual-exclusion approach would
deadlock in certain circumstances due to the fact that the
settings database creation code might have to call out to the
Package Manager while populating the bookmark/shortcut table,
and the Package Manager would then call back into the settings
provider in the course of handling that request. The synchronization
regime has been significantly tightened up now: now the database
code [which is known to deal with concurrency itself] is allowed
to cope with multiple parallel openers of the same db; this
allows the settings provider to avoid calling out to other parts
of the system even implicitly while its internal lock is held.
Change-Id: Ib77d445b4a2ec658cc5c210830f6977c981f87ed
Quick Settings and global actions (aka longpress-Power) toggles are
included in this CL. The Settings app manipulations are updated in
a different CL because that's a different git package.
Bug 7132230
Change-Id: I50838f5e8d7b25a750d2bcae90bf384b09816dbb
Instead of unpacking libraries into /data/data/<appname>/lib, unpack
them into /data/app-lib so that multi-user applications can use the same
libraries.
Change-Id: I636dafb5a9eea8cf5a41f1360698e7695455f385
In order to make sure we have unpacking and deletion working, add a fake
JNI library to every APK.
This can be expanded in the future to make sure replacement is working
correctly as well.
Change-Id: I1ad04c61df9518429aa17795b8a9d3608791cd8e
Make sure that native library paths have the correct permissions and
owners. Also make it easier to do a "String#startsWith" test so we can
get better errors when it fails.
Change the observer to have more sane semantics with a CountDownLatch
instead of weird synchronization on a local variable.
Change-Id: I2437e5ea886d6e6cb8b4edeab80d6053b79857d4
Change all the test method headers to throw Exception so we don't have
to try to catch anything during the tests. Catching an exception might
mask an error during the tests.
Also fix a lot of formatting errors that have built up over the years.
This includes 3-space indentations instead of 4-space, missing spaces
between braces and parens, too-long lines, wrapping when it isn't
needed, etc.
Change-Id: Ifccea5f0706b6f9235f37974a5f80bee76c654dd
installd was not creating a compatibility symlink when
installing a forward locked application. Fix.
Bug: 7121527
Change-Id: Ied507ab2b759d8658af563e6ac8f0dbb0d286cce
Replaced all remaining places that used it with explicit user
specification.
While doing this, I ran into stuff that was creating PendingIntent
objects (that now need to specify the explicit user they are for),
which are also posting notifications... but have no way to specify
the user for the notification.
So the notification manager in the system process now also gets a
formal concept of a user associated with the notification, which
is passed in to all the necessary aidl calls. I also removed the
old deprecated aidl interface for posting/cancelling notifications,
since we now always need a user supplied.
There is more work that needs to be done here, though. For example
I think we need to be able to specify USER_ALL for a notification that
should be shown to all users (such as low storage or low battery).
Along with that, the PendingIntent creation needs to be tweaked to
be able to handle USER_CURRENT by evaluating the user at the point the
pending intent is sent.
That's for another change, however.
Change-Id: I468e14dce8def0e13e0870571e7c31ed32b6310c
You can now use ALL and CURRENT when sending broadcasts, to specify
where the broadcast goes.
Sticky broadcasts are now correctly separated per user, and registered
receivers are filtered based on the requested target user.
New Context APIs for more kinds of sending broadcasts as users.
Updating a bunch of system code that sends broadcasts to explicitly
specify which user the broadcast goes to.
Made a single version of the code for interpreting the requested
target user ID that all entries to activity manager (start activity,
send broadcast, start service) use.
Change-Id: Ie29f02dd5242ef8c8fa56c54593a315cd2574e1c
This add a new per-user state for an app, indicating whether
it is installed for that user.
All system apps are always installed for all users (we still
use disable to "uninstall" them).
Now when you call into the package manager to install an app,
it will only install the app for that user unless you supply
a flag saying to install for all users. Only being installed
for the user is just the normal install state, but all other
users have marked in their state for that app that it is not
installed.
When you call the package manager APIs for information about
apps, uninstalled apps are treated as really being not visible
(somewhat more-so than disabled apps), unless you use the
GET_UNINSTALLED_PACKAGES flag.
If another user calls to install an app that is already installed,
just not for them, then the normal install process takes place
but in addition that user's installed state is toggled on.
The package manager will not send PACKAGE_ADDED, PACKAGE_REMOVED,
PACKAGE_REPLACED etc broadcasts to users who don't have a package
installed or not being involved in a change in the install state.
There are a few things that are not quite right with this -- for
example if you go through a full install (with a new apk) of an
app for one user who doesn't have it already installed, you will
still get the PACKAGED_REPLACED messages even though this is
technically the first install for your user. I'm not sure how
much of an issue this is.
When you call the existing API to uninstall an app, this toggles
the installed state of the app for that user to be off. Only if
that is the last user user that has the app uinstalled will it
actually be removed from the device. Again there is a new flag
you can pass in to force the app to be uninstalled for all users.
Also fixed issues with cleaning external storage of apps, which
was not dealing with multiple users. We now keep track of cleaning
each user for each package.
Change-Id: I00e66452b149defc08c5e0183fa673f532465ed5
Introduce API to get per-user storage information, keep track
of services associated with users, and various small cleanup.
Change-Id: I5d4e784e7ff3cccfed627d66a090d2f464202634
This change passes the originating URL and accompanied referrer to
package verifiers, when available.
Bug: 6544677
Change-Id: I9ebc71bc13f549bd88267e444816151a99bda000
Remove the last user of FileUtils#getFileStatus and move it to
Libcore.os.stat instead. Then we can remove the JNI code that does the
equivalent of a stat.
Change-Id: Ieb566a2a8a17c2dd0150724b4eb3ac1cc41c823d
The major goal of this rewrite is to make it easier to implement
power management policies correctly. According, the new
implementation primarily uses state-based rather than event-based
triggers for applying changes to the current power state.
For example, when an application requests that the proximity
sensor be used to manage the screen state (by way of a wake lock),
the power manager makes note of the fact that the set of
wake locks changed. Then it executes a common update function
that recalculates the entire state, first looking at wake locks,
then considering user activity, and eventually determining whether
the screen should be turned on or off. At this point it may
make a request to a component called the DisplayPowerController
to asynchronously update the display's powe state. Likewise,
DisplayPowerController makes note of the updated power request
and schedules its own update function to figure out what needs
to be changed.
The big benefit of this approach is that it's easy to mutate
multiple properties of the power state simultaneously then
apply their joint effects together all at once. Transitions
between states are detected and resolved by the update in
a consistent manner.
The new power manager service has is implemented as a set of
loosely coupled components. For the most part, information
only flows one way through these components (by issuing a
request to that component) although some components support
sending a message back to indicate when the work has been
completed. For example, the DisplayPowerController posts
a callback runnable asynchronously to tell the PowerManagerService
when the display is ready. An important feature of this
approach is that each component neatly encapsulates its
state and maintains its own invariants. Moreover, we do
not need to worry about deadlocks or awkward mutual exclusion
semantics because most of the requests are asynchronous.
The benefits of this design are especially apparent in
the implementation of the screen on / off and brightness
control animations which are able to take advantage of
framework features like properties, ObjectAnimator
and Choreographer.
The screen on / off animation is now the responsibility
of the power manager (instead of surface flinger). This change
makes it much easier to ensure that the animation is properly
coordinated with other power state changes and eliminates
the cause of race conditions in the older implementation.
The because of the userActivity() function has been changed
so that it never wakes the device from sleep. This change
removes ambiguity around forcing or disabling user activity
for various purposes. To wake the device, use wakeUp().
To put it to sleep, use goToSleep(). Simple.
The power manager service interface and API has been significantly
simplified and consolidated. Also fixed some inconsistencies
related to how the minimum and maximum screen brightness setting
was presented in brightness control widgets and enforced behind
the scenes.
At present the following features are implemented:
- Wake locks.
- User activity.
- Wake up / go to sleep.
- Power state broadcasts.
- Battery stats and event log notifications.
- Dreams.
- Proximity screen off.
- Animated screen on / off transitions.
- Auto-dimming.
- Auto-brightness control for the screen backlight with
different timeouts for ramping up versus ramping down.
- Auto-on when plugged or unplugged.
- Stay on when plugged.
- Device administration maximum user activity timeout.
- Application controlled brightness via window manager.
The following features are not yet implemented:
- Reduced user activity timeout for the key guard.
- Reduced user activity timeout for the phone application.
- Coordinating screen on barriers with the window manager.
- Preventing auto-rotation during power state changes.
- Auto-brightness adjustment setting (feature was disabled
in previous version of the power manager service pending
an improved UI design so leaving it out for now).
- Interpolated brightness control (a proposed new scheme
for more compactly specifying auto-brightness levels
in config.xml).
- Button / keyboard backlight control.
- Change window manager to associated WorkSource with
KEEP_SCREEN_ON_FLAG wake lock instead of talking
directly to the battery stats service.
- Optionally support animating screen brightness when
turning on/off instead of playing electron beam animation
(config_animateScreenLights).
Change-Id: I1d7a52e98f0449f76d70bf421f6a7f245957d1d7
These have been created to reduce the size and complexity
of frameworks/base.
mms-common was created by moving all of
frameworks/base/core/java/com/google/android/mms
to:
frameworks/opt/mms
telephony-common was created by moving some of
frameworks/base/telephony
to:
frameworks/opt/telephony
Change-Id: If6cb3c6ff952767fc10210f923dc0e4b343cd4ad
These have been created to reduce the size and complexity
of frameworks/base.
mms-common was created by moving all of
frameworks/base/core/java/com/google/android/mms
to:
frameworks/opt/mms
telephony-common was created by moving some of
frameworks/base/telephony
to:
frameworks/opt/telephony
Change-Id: If6cb3c6ff952767fc10210f923dc0e4b343cd4ad
Make StateMachine#quit non-conditional and remove the need to
process the SM_QUIT_CMD it is now private.
Rename halting to onHalting.
Add onQuitting
Change the message specific logging to be more generic and change
the xxxProcessedMessagesYyy methods to xxxLogRecXyy names. Also add
addLogRec(String) and addLogRec(String, State) as the generic logging
methods.
bug: 5678189
Change-Id: I22f66d11828bfd70498db625fe1be728b90478b7
Conflicts:
services/java/com/android/server/NsdService.java
