We set the system_server classpath in the environment
(like we do with BOOTCLASSPATH). After the zygote forks
the system_server, we dexopt the classpath (if needed)
and then launch the system server with the correct
PathClassLoader. This needed several small / medium
refactorings :
- The logic for connecting to installd is now in a separate
class and belongs in the system_server.
- SystemService / SystemServiceManager have now moved to
classes.jar. They are only used from there, and since they
use Class.forName, we want them to be loaded by the
system_server classloader, and not the bootclassloader.
- BootReceiver now moves to frameworks.jar, because it is
used by ActivityThread and friends.
bug: 16555230
Change-Id: Ic84f0b2baf611eeedff6d123cb7191bb0259e600
This reverts commit 87efe74e092236c372d3b6909009641123aa416a.
This should be fine now with all the dependency CLs +2-ed
Change-Id: I96ad14ad5ff81e6b5391035cb6c5a62339c6cc40
- Get rid of ActivityManager.dismissKeyguardOnNextActivity, which was
used for two different things: Dismiss keyguard from somewhere else
(not really necessary anymore), wait to actually dismiss keyguard
after the window behind is drawn. Instead, introduce
keyguardWaitingForActivityDrawn(), and change the semantics where
necessary.
- Make wallpaper_close_enter consistent with task_open_enter and the
Keyguard launch animation.
- Close the panel even on lockscreen when launching a notification.
- Block notification shade updates during the collapsing motion so
notification don't play the disappear animation immediately after
having launched a notification.
Bug: 15991916
Change-Id: I133c177b84e926c87c1a404ba93d633593fec3ab
Some devices use clatd for catching raw IPv4 traffic when running on
a pure-IPv6 carrier network. In those situations, the per-UID
stats are accounted against the clat iface, so framework users need
to combine both the "base" and "stacked" iface usage together.
This also means that policy rules (like restricting background data
or battery saver) need to apply to the stacked ifaces.
Finally, we need to massage stats data slightly:
-- Currently xt_qtaguid double-counts the clatd traffic *leaving*
the device; both against the original UID on the clat iface, and
against UID 0 on the final egress interface.
-- All clatd traffic *arriving* at the device is missing the extra
IPv6 packet header overhead when accounted against the final UID.
Bug: 12249687, 15459248, 16296564
Change-Id: I0ee59d96831f52782de7a980e4cce9b061902fff
The power manager disables the power button until boot completed
occurs. If there are many pending broadcasts in the queue, it
may be possible for BOOT_COMPLETED to be delayed for several
seconds after boot.
To avoid the delay, introduced a new boot phase which is
sent to system services immediately when boot completed happens.
Bug: 13398280
Change-Id: I1833d2ffb20305009dd76363b43e534034f1d0a2
Based on feedback from API council, updated the API.
Also added support for querying the event log.
Change-Id: Ibaa008b9e5bd145acdfe8e20c25c2ed2d96be123
Issue #16655104: Android system used 21% of battery
We weren't clearing the current process state when we now retain
process objects across resets.
Issue #16875776: abnormal outliers in screen-off battery life in go/batterystats
The checkin data since charged was using the since unplugged data
for the amount of drain with the screen on/off.
Also added a new version tag in the checkin output containing
the platform build number and internal version format number, to
start moving away from the wasteful version code on every line.
And fixed a bug in figuring out when things have changed over
discharge levels.
Change-Id: I89b89513a748016aacc848f14bbbc8b2400d92ca
- No longer track process starts/stops normally.
- Increase buffer size to 256KB.
- Buffer size increase requires reworking how battery stats
are retrieved, since it is going to be hitting IPC limits.
- Also, store the last full stats after a reset, to be reported
at the next checkin.
- Also, discharge and charge times are tagged with the screen
and battery save state during that time.
Change-Id: Ie108ac9b626846108a9bb858101ac2b93276ac16
When using ToolbarActionBar simply fall through to the default window
decor behavior for showing action modes.
Bug 16660506
Change-Id: Ib90282287b2af48f39f9d9ace296581565431eed
The goal of this change is to enable support for appwidget from
user profiles to the user main profile. A user profile is a user
which is associated as a child of the main user profile. For example,
a user may have a personal (parent) and corporate (child) profile.
The device policy should be able to control whether adding a widget
from a child profile and given packages is allowed. This change
assumes that all packages from managed profiles are white listed.
Another change will add the device policy changes.
Change-Id: I267260b55d74c48b112a29979a9f59eef7a8194e
The ResolverActivity method getCount() returns the number of
entries below the default entry, not the total number of entries.
But the onCreate() method expected the getCount() method to
return the total number of entries. This change provides the total
to onCreate().
Fixes bug 16800358.
Change-Id: I3915c3d5ad642e31d7248226fc91bd4047f16b2d
- Send the notification light info up to SystemUI from NoMan.
- Doze mode will now periodically pulse the display (once)
if the notification light is active.
- Change "tease" terminology to "pulse", which is the singular.
Maintain the multi-pulse on buzz-beep-blink for now as extra
emphasis.
- Scrim controller now always takes number of pulses as an arg,
to support a single pulse (used for notification light, and
eventually pickup once available).
- Dial down the display brightness when pulsing.
Bug:15863249
Change-Id: Ifb208a27e82b66cff1d0c04e5b7f758098ea29cf
Trusted credentials for both the primary user and its managed profiles are shown
on the Trusted Credentials fragment. All functionalities (e.g. disabling/enabling
of certificates) remain available.
Bug: 16029580
Change-Id: Ia92ae02d8c572bf4a3be172f6c255726cefc0fa1
bug:16140822
bug:16566746
This allows background drawables to alter the opacity of a shadow
being cast with their own alpha values.
Change-Id: I49698cc7c1bf4b2b55ffe2f82899543ca62bc61c
To resume install sessions across device boots, persist session
details and read at boot. Drop sessions older than 3 days, since
they're probably buggy installers.
Add session callback lifecycle around open/close to give home apps
details about active installs. Also give them a well-known intent
to show session details.
Extend Session to list staged APKs and open them read-only, giving
installers a mechanism to verify delivered bits, for example using
MessageDigest, before committing.
Switch to generating random session IDs instead of sequential.
Defensively resize app icons if too large. Reject runaway
installers when they have too many active sessions.
Bug: 16514389
Change-Id: I66c2266cb82fc72b1eb980a615566773f4290498
In IntentFowarderActivity, if the selector of an intent is defined,
use it to check if the intent can be forwarded.
Change-Id: Ic77f70bca5596e0a5fb0fec9b7a693afaa649089
For launcher that do not support managed profiles.
Also, ignore the intent after click on those launchers.
Change-Id: I3d5691952a9409755b7cde68a3caba98a3772665
This change includes various fixes to first RTT implementation and
enables RTT APIs end-to-end. Fixes include proper marshalling of
objects across API and service and JNI fixes.
Change-Id: Ie4ba1ffc6c5b42593e931438b3f03e201ff6be71
- Tie the sound model and keyphrase for simplicity
We won't support multiple keyphrases in a single model out of the box.
The db schema will need to be changed by the OEM wishing to add multiple hotwords.
This is because we currently have no way to test the flow and make sure that things work well with multiple keyphrases
and also the framework only reads the metadata for one keyphrase.
- Make the delete/update operations atomic
- Make the flow of data from Enrollment -> VIMS; the large sound model doesn't cross the process boundary any other time.
This is achieved by passing they key around, instead of the model themselves.
- Add a specific delete operation in DatabaseHelper rather than relying on emptying the keyphrases to delete.
Bug: 16555803
Bug: 16516353
Change-Id: I1e0cce137517502a669e431ca7e9f9f755598328
Bypassable VPNs grab all traffic by default (just like secure VPNs), but:
+ They allow all apps to choose other networks using the multinetwork APIs.
If these other networks are insecure ("untrusted"), they will enforce that the
app holds the necessary permissions, such as CHANGE_NETWORK_STATE.
+ They support consistent routing. If an app has an existing connection over
some other network when the bypassable VPN comes up, it's not interrupted.
Bug: 15347374
Change-Id: Iaee9c6f6fa8103215738570d2b65d3fcf10343f3
Also moves the setNavigationIcon(int) method closer to the one that
takes a Drawable.
BUG: 16491458
Change-Id: Ia02f05e6270c9d420f61f7ab34117b4c7e6548ec
The intents ACTION_IMAGE_CAPTURE, ACTION_IMAGE_CAPTURE_SECURE and ACTION_VIDEO_CAPTURE are now handled in a way
similar to ACTION_SEND and ACTION_SEND_MULTIPLE.
Migrate the uri in the EXTRA_OUTPUT extra to clipData, and add the flag GRANT_WRITE_URI_PERMISSION.
The userIds are now added to extra uris in the process receiving the intent, (not in the system process), because the
system process may not be able to parcel/unparcel the extras.
BUG: 15534203
Change-Id: I8f79666b726bc6d7745bf777ad3c7518945c5cc3
With this CL, InputMethodSubtypeSwitchingController stop
assuming that language part in locale string is up to 2-letter.
this CL is not so risky because
InputMethodSubtypeSwitchingController have used language part for
nothing but sorting subtypes to determine the initial rotation
order of IME switching.
BUG: 16502987
Change-Id: Ib159ece0b7aa04f8fd7abc96c9a6e0832a4b7cd2
