Other:
- add a comment to nextUniqueId
- made ThreadBase::mId const, since it is only assigned in constructor.
Change-Id: I4e8b7bec4e45badcde6274d574b8a9aabd046837
Was a mix of audio_source_t, uint8_t, and int.
Related fixes:
- fix comments in MediaRecorder.java
- AudioPolicyService server side was not checking source parameter at
all, so if the client wrapper was bypassed, invalid values could be
passed into audio HAL
- JNI android_media_AudioRecord_setup was checking source for positive
values, but not negative values. This test is redundant, since already
checked at Java and now checked by AudioPolicyService also, but might
as well make it correct.
Change-Id: Ie5e25d646dcd59a86d7985aa46cfcb4a1ba64a4a
Was int or uint32_t.
When AudioFlinger::format can't determine the correct format,
return INVALID rather than DEFAULT.
Init mFormat to INVALID rather than DEFAULT in the constructor.
Subclass constructors will set mFormat to the correct value.
Change-Id: I9b62640aa107d24d2d27925f5563d0d7407d1b73
get() is almost always unnecessary, except in a LOG.
Also no need to check for != 0 before calling get().
Change-Id: Ib06e7a503f86cf102f09acc1ffb2ad085025516d
Improve volume management by keeping track of volume for each type
of device independently.
Volume for each stream (MUSIC, RINGTONE, VOICE_CALL...) is now maintained
per device.
The main changes are:
- AudioService now keeps tracks of stream volumes per device:
volume indexes are kept in a HashMap < device , index>.
active device is queried from policy manager when a volume change request
is received
initalization, mute and unmute happen on all device simultaneously
- Settings: suffixes is added to volume keys to store each device
volume independently.
- AudioSystem/AudioPolicyService/AudioPolicyInterface: added a device argument
to setStreamVolumeIndex() and getStreamVolumeIndex() to address each
device independently.
- AudioPolicyManagerBase: keep track of stream volumes for each device
and apply volume according to current device selection.
Change-Id: I61ef1c45caadca04d16363bca4140e0f81901b3f
At native level it was a mixture of audio_stream_type_t, int, uint32_t,
and uint8_t. Java is still int. Also fixed a couple of hard-coded -1
instead of AUDIO_STREAM_DEFAULT, and in startToneCommand a hard-coded 0
instead of AUDIO_STREAM_VOICE_CALL.
Change-Id: Ia33bfd70edca8c2daec9052984b369cd8eee2a83
AudioSystem::setMode previously allowed negative modes, but these were
then rejected by AudioFlinger.
Now negative modes (including AUDIO_MODE_INVALID and AUDIO_MODE_CURRENT)
are explicitly disallowed.
Change-Id: I0bac8fea737c8eb1f5b6afbb893e48739f88d745
When the A2DP headset is connected, there is a possible
race condition when the audio tracks are moved from
the mixer thread attached to the speaker output to the thread
attached to A2DP output.
As the request to clear the stream type to output mapping cache in
the client process is asynchronous, it is possible that the flag
indicating to the client audio track to re-create the IAudioTrack
on the new thread is processed before the cache is invalidated.
In this case, the track will be attached to the old thread and
music will continue playing over the device speaker instead of being
redirected to A2DP headset.
Change-Id: Ib2ce1eb5320eaff83287b93779061bf4e7a330df
Before this change, CPU and memory usage for an audio effect were
registered and checked against the limit by audio policy manager
upon effect instantiation. Even if an effect was not enabled
it would prevent another effect to be created if the CPU load budget
was exceeded, which was too restrictive.
This change adds a method to register/unregister CPU load only when
an effect is enabled or disabled.
It also adds a mechanism to place all effects on the global output mix
in suspend state (disabled) when an effect is enabled on a specific session.
This will allow applications using session effects to have the priority
over others using global effects.
Also fixes some issues with suspend/restore mechanism:
- avoid taking actions when an effect is disconnected and was not enabled.
- do not remove a session from the suspended sessions list when corresponding
effect chain is destroyed.
Change-Id: I5225278aba1ae13d0d0997bfe26a0c9fb46b17d3
Don't remove effects until the session they are in goes away or all
AudioEffects have been explicitly released. This allows the control
panel process to die without stopping the effects.
Change-Id: I4496e5df080230ca1af149dec95c1309ab8ea888
Audio effect framework is extended to suport effects on
output and input audio path.
AudioFlinger: Support for audio effects and effect chains is
moved from PlaybackThread class to ThreadBase class so that
RecordThread can manage effects.
Effects of type pre processing are allowed on record thread
only. When a pre processing is enabled, the effect interface handle is
passed down to the input stream so that the audio HAL can call the
process function. The record thread loop calls the effect chain process
function that will only manage the effect state and commands and skip the
process function.
AudioRecord: The audio session is allocated before calling getInput() into
audio policy serice so that the session is known before the input theead is
created and pre processings can be created on the correct session.
AudioPolicyService: default pre processing for a given input source are
loaded from audio_effects.conf file.
When an input is created, corresponding effects are created and enabled.
Change-Id: Id17119e0979b4dcf189b5c7957fec30dc3478790
Modified default volume control logic in AudioService:
1 IN_CALL volume if in video/audio chat
2 NOTIFICATION if notification is playing or was playing less than 5s ago.
3 MUSIC
Modified silent mode:
- now also affect MUSIC stream type
- entering silent mode when VOL- hard key is pressed once while selected
stream volume is already at 0 (except for VOICE_CALL stream).
- exiting silent mode when pressing VOL+ hard key while in silent mode
Play sound FX (audible selections, keyboard clicks) at a fixed volume.
Modified audio framework:
- isStreamActive() method now implemented in AudioPolicyManagerBase (previously AudioFlinger)
- iStreamActive() now specifies a time window during which the stream is considered
active after it actually stopped.
Change-Id: I7e5a0724099450b9fc90825224180ac97322785f
Update the platform-independent audio policy manager to pass the
nature of the audio recording source to the audio policy client
interface through the AudioPolicyClientInterface::setParameters()
method.
Change-Id: I6b4fd0f8a3acea0d7d30bbad98edd1977dc012bf
Added methods for audio effects management by audio policy manager.
- control of total CPU load and memory used by effect engines
- selection of output stream for global effects
- added audio session id in parameter list for startOutput() and stopOutput().
this is not used in default audio policy manager implementation.
Modifications of audio effect framework in AudioFlinger to allow moving and reconfiguring
effect engines from one output mixer thread to another when audio tracks in the same session
are moved or when requested by audio policy manager.
Also fixed mutex deadlock problem with effect chains locks.
Change-Id: Ida43484b06e9b890d6b9e53c13958d042720ebdb
First drop of audio framework modifications for audio effects support.
- AudioTrack/AudioRecord:
Added support for auxiliary effects in AudioTrack
Added support for audio sessions
Fixed left right channel inversion in setVolume()
- IAudioFlinger:
Added interface methods for effect enumeraiton and instantiation
Added support for audio sessions.
- IAudioTrack:
Added method to attach auxiliary effect.
- AudioFlinger
Created new classes to control effect engines in effect library and manage effect connections to tracks or
output mix:
EffectModule: wrapper object controlling the effect engine implementation in the effect library. There
is one EffectModule per instance of an effect in a given audio session
EffectChain: group of effects associated to one audio session. There is one EffectChain per audio session.
EffectChain for session 0 is for output mix effects, other chains are attached to audio tracks
with same session ID. Each chain contains a variable number of EffectModules
EffectHandle: implements the IEffect interface. There is one EffectHandle object for each application
controlling (or using) an effect module. THe EffectModule maintians a list of EffectHandles.
Added support for effect modules and effect chains creation in PlaybackThread.
modified mixer thread loop to allow track volume control by effect modules and call effect processing.
-AudioMixer
Each track now specifies its output buffer used by mixer for accumulation
Modified mixer process functions to process tracks by groups of tracks with same buffer
Modified track process functions to support accumulation to auxiliary channel
Change-Id: I26d5f7c9e070a89bdd383e1a659f8b7ca150379c
The problem is that when an input stream is opened for record over bluetooth SCO, the kernel
mono audio device should be opened in RW mode to allow further use of this same device by an output stream
also routed to bluetooth SCO.
This does not happen because of a bug in AudioSystem::isBluetoothScoDevice() that does not return true
when the device is DEVICE_IN_BLUETOOTH_SCO_HEADSET (input device for blurtooth SCO).
Change-Id: I9100e972931d8142295c7d64ec06e31304407586
- AudioPolicyManager: allow platform specific choice for opening a direct output.
Also fixed problems in direct output management.
- AudioFliinger: use shorter standby delay and track inactivity grace period for direct output
thread to free hardware resources as soon as possible.
- AudioSystem: do not use cached output selection in getOutput() when a direct output
can be selected.
Change-Id: If44b50d29237b8402ffd7a5ba1dc43c56f903e9b
This change fixes a problem where an unwanted tone is generated by audio policy manager when a MT call is answered.
This is because of a policy that replaces high visibility system sounds (ringtones, alarms...) by a beep when in call.
There is a transitory phase while the call is being answered where the phone state is changed to IN_CALL but the
ringtone is still playing. The audio policy manager then mutes the end of the ringtone and starts playing a beep
in replacement because the ringtone is categorized as high visibility.
The fix consists in changing the ringtone stream type from high visibility to low visibility. This is not a problem as
the only actual use case where a ringtone would be generated while in call is if another call is received.
But in this case, the phone system does not generate a ringtone but a call waiting tone instead.
It is therefore not required to handle a ringtone as a high visibiltiy tone that must be somehow signaled to the user
while in call.
Added getRenderPosition() API to IAudioFlinger to retreive number of audio frames
written by AudioFlinger to audio HAL and by DSP to DAC.
Added getRenderPosition() API to AudioHardwareInterface to retreive number of audio frames
written by DSP to DAC.
Exposed AudioTrack::getPosition() to AudioSink() to make it available to media player.
Removed excessive log in AudioHardwareGeneric.
Modified AudioService.getActiveStreamType() so that STREAM_VOICE_CALL is selected when a track using this stream
type is playing.
Chanded isMusicActive() for a more generic isStreamActive(stream) method in AudioSystem, IAudioFlinger and AudioFlinger.
The problem is that after a media_server crash, the value of the A2DP output handle can change.
As this value is cached in AudioSystem for all client processes there can be a mismatch between the cached
and actual value after a media_server restart.
The fix consists in clearing the cached output handles and output to stream map values cached
in AudioSystem in AudioFlingerClient::binderDied() which is called when the media_server crashes.
Added setVoiceVolume() method to AudioSystem, AudioFlinger, IAudioFlinger, AudioPolicyService.
Removed call to AudioHardwareInterface::setVoiceVolume() from AudioFlinger::setStreamVolume().
