except in the control block, where we don't have room.
In AudioFlinger::ThreadBase::TrackBase::getBuffer,
read the frame size from control block only once.
Change-Id: Id6c4bccd4ed3e07d91df6bbea43bae45524f9f4e
At native level it was a mixture of audio_stream_type_t, int, uint32_t,
and uint8_t. Java is still int. Also fixed a couple of hard-coded -1
instead of AUDIO_STREAM_DEFAULT, and in startToneCommand a hard-coded 0
instead of AUDIO_STREAM_VOICE_CALL.
Change-Id: Ia33bfd70edca8c2daec9052984b369cd8eee2a83
Was int, uint32_t, uint16_t, and uint8_t with 2-bit bitfield.
Also replace 0 by AUDIO_FORMAT_DEFAULT and replace 1 by
AUDIO_FORMAT_PCM_16_BIT.
Change-Id: Ia8804f53f1725669e368857d5bb2044917e17975
mActive is protected by mLock; volatile is meaningless on SMP.
Fixed a couple of places where mActive was accessed without a lock:
- stopped()
- processAudioBuffer()
Added stopped_l() for cases where we already hold the lock.
Made mActive a bool not int.
Moved down a lock in setPosition that was being acquired too early.
Change-Id: I73ff368e991c0db9f9472df0b3f96fd33fcc7311
On AudioTrack and AudioRecord stop or failed start, restore the priority
and cgroup of the caller to their previous values, rather than forcing
to NORMAL. Dependent on new thread APIs.
Also fixes bug where priority was set to AUDIO but cgroup not set.
Change-Id: Ib83893918fb4fdf57c6b87884b51038997a631d8
Fixed problem in AudioTrack::restoreTrack_l() causing a permanent
failure if the IAudioTrack interface to AudioFlinger could not be
restored at the first attempt.
Change-Id: I039d4fe2dca8d3baf71f1a6c51119f27a67b6611
AudioTrack::stop() is not synchronous, so a stop() followed
by flush(), which is synchronous, will not always report
a playhead position of 0 after being called.
This CL adds a flag to mark a track as flushed, and report the
correct playhead position in this state.
Bug 5217011 has been created to address the real issue in the
future, where flush could be made synchronous, to properly
address bug 4364249.
Change-Id: Icf989d41a6bcd5985bb87764c287f3edb7e26d12
Record and playback objects (resp AudioRecord and AudioTrack)
are created using a channel mask, but this information is lost
in the mixer because only the channel count is known to
AudioFlinger. A channel count can always be derived from a
channel mask.
The change consists in:
- disambiguiting variable names for channel masks and counts
- passing the mask information from the client to AudioFlinger
and the mixer.
- when using the DIRECT ouput, only verifying the format of
the track is compatible with the output's for PCM.
Change-Id: I50d87bfb7d7afcabdf5f12d4ab75ef3a54132c0e
This change fixes the stability problems experienced when using
a bluetooth headset supporting both A2DP and SCO. Problems occur
when starting the video chat at which time the A2DP output is being
stopped to start SCO. At that time, active AudioTracks are invalidated
by AudioFlinger so that a new AudioTrack binder interface can be
recreated by the client process on the new mixer thread with correct parameters.
The problem was that the process to restore the binder interface was not
protected against concurrent requests which caused 2 binder interfaces
to be created sometimes. This could lead to permanent client deadlock
if one of the client threads was waiting for a condition of the first
created binder interface while the second one was created (as the AudioFlinger
would only signal conditions on the last one created).
This concurrent request situation is more likely to happen when a client
uses the JAVA AudioTrack as the JNI implementation uses simultaneously the
native AudioTrack callback and write push mechanisms. By doing so, the code
that checks if the binder interface should be restored (in obtainBuffer()) is
much more likely to be called concurrently from two different threads.
The fix consists in protecting the critical binder interface restore phase
with a flag in the AudioTrack control block. The first thread acting upon the binder
interface restore request will raise the flag and the second thread will just wait for
a condition to be signaled when the restore process is complete.
Also protected all accesses to the AudioTrack control block by a mutex to prevent
access while the track is being destroyed and restored. If a mutex cannot be held
(e.g because we call a callback function), acquire a strong reference on the IAudioTrack
to prevent its destruction while the cblk is being accessed.
Modified AudioTrack JNI to use GetByteArrayElements() instead of
GetPrimitiveArrayCritical() when writing audio buffers. Entering a critical section would
cause the JNI to abort if a mediaserver crash occurs during a write due to the AudioSystem
callback being called during the critical section when media server process restarts.
Anyway with current JNI implementation, either versions do not copy data most of the times
and the criticial version does not guaranty no data copy.
The same modifications have been made to AudioRecord.
Change-Id: Idc5aa711a04c3eee180cdd03f44fe17f3c4dcb52
Use a Mutex wherever atomic operations were used in AudioTrack,
AudioRecord, AudioFlinger and AudioEffect classes.
Change-Id: I6f55b2cabdcd93d64ef19446735b8f33720f8dbc
Added methods to AudioTrack and MediaPlayer java classes to enable use of
auxiliary audio effects. The effect can be attached and detached by specifying its
ID and the send level controlled.
Change-Id: Ie74ff54a453096a742688476f612ce355543b6f3
First drop of audio framework modifications for audio effects support.
- AudioTrack/AudioRecord:
Added support for auxiliary effects in AudioTrack
Added support for audio sessions
Fixed left right channel inversion in setVolume()
- IAudioFlinger:
Added interface methods for effect enumeraiton and instantiation
Added support for audio sessions.
- IAudioTrack:
Added method to attach auxiliary effect.
- AudioFlinger
Created new classes to control effect engines in effect library and manage effect connections to tracks or
output mix:
EffectModule: wrapper object controlling the effect engine implementation in the effect library. There
is one EffectModule per instance of an effect in a given audio session
EffectChain: group of effects associated to one audio session. There is one EffectChain per audio session.
EffectChain for session 0 is for output mix effects, other chains are attached to audio tracks
with same session ID. Each chain contains a variable number of EffectModules
EffectHandle: implements the IEffect interface. There is one EffectHandle object for each application
controlling (or using) an effect module. THe EffectModule maintians a list of EffectHandles.
Added support for effect modules and effect chains creation in PlaybackThread.
modified mixer thread loop to allow track volume control by effect modules and call effect processing.
-AudioMixer
Each track now specifies its output buffer used by mixer for accumulation
Modified mixer process functions to process tracks by groups of tracks with same buffer
Modified track process functions to support accumulation to auxiliary channel
Change-Id: I26d5f7c9e070a89bdd383e1a659f8b7ca150379c
The problem is due to a too big difference between the buffer size used at the hardware interface and at the A2DP interface.
When no resampling occurs we don't notice problems but the timing is very tight. As soon as resampling is activated, the AudioTrack underruns.
This is because the AudioTrack buffers are not resized when moving the AudioTrack from hardware to A2DP output.
The AudioTrack buffers are calculated based on a hardware output buffer size of 3072 bytes. Which is much less than the A2DP output buffer size (10240).
The solution consists in creating new tracks with new buffers in AudioFlinger when the A2DP output is opened
instead of just transfering active tracks from hardware output mixer thread to the new A2DP output mixer thread.
To avoid synchronization issues between mixer threads and client processes, this is done by invalidating tracks
by setting a flag in their control block and having AudioTrack release the handle on this track (IAudioTrack)
and create a new IAudioTrack when this flag is detected next time obtainBuffer() or start() is executed.
AudioFlinger modifications:
- invalidate the tracks when setStreamOutput() is called
- make sure that notifications of output opening/closing and change of stream type to output mapping are sent synchronously to client process.
This is necessary so that AudioSystem has the new stream to output mapping when the AudioTrack detects the invalidate flag in the client process.
Previously their were sent when the corresponding thread loop was executed.
AudioTrack modifications:
- move frame count calculation and verification from set() to createTrack() so that is is updated every time a new IAudioTrack is created.
- detect track invalidate flag in obtainBuffer() and start() and create a new IAudioTrack.
AudioTrackShared modifications
- group all flags (out, flowControlFlag, forceReady...) into a single bit filed to save space.
Change-Id: I9ac26b6192230627d35084e1449640caaf7d56ee
Create a new IAudioTrack interface to AudioFlinger when start() fails due to a broken pipe error.
Do the same if start fails due to the same error after time out in obtainBuffer().
Do not indicate that the AudioTrack is started to AudioPolicyManager if IAudioTrack start fails.
This avoids that an AudioTrack keeps a dead IAudioTrack after a media server crash.
Same modifications for AudioRecord.
Add a flag to ToneGenerator indicating that the callback thread can call Java. Without it, when the media server crashes and restarts, the AudioSystem error callback will crash in JNI if the IAudiotrack is created from AudioTrack callback thread.
Initial commit for review.
Integrated comments after patch set 1 review.
Fixed lockup in AudioFlinger::ThreadBase::exit()
Fixed lockup when playing tone with AudioPlocyService startTone()
Merge commit '88e209dcf8c2ebddda5c272f46d1bd5478bc639c'
* commit '88e209dcf8c2ebddda5c272f46d1bd5478bc639c':
Fix issue 1743700: AudioTrack: setPlaybackRate can not set the playback rate to twice of the ouputSR
Store sample rate on 32 bits instead of 16 bits in audio_track_cblk_t.
Removed sampleRate() methods from AudioTrack and AudioRecord: replaced by getSampleRate().
AudioTrack::setSampleRate() no returns a status.
AudioTrack, AudioRecord:
- remove useless mAudioFlinger member of AudioTrack and AudioRecord.
- signal cblk.cv condition in stop() method to speed up stop completion.
- extend wait condition timeout in obtainBuffer() when waitCount is -1 to avoid waking up callback thread unnecessarily
AudioFlinger:
- remove some warnings in AudioFlinger.cpp.
- remove function AudioFlinger::MixerThread::removetrack_l() as its content is never executed.
- remove useless call to setMasterVolume in AudioFlinger::handleForcedSpeakerRoute().
- Offset VOICE_CALL stream volume to reflect actual volume that is never 0 in hardware (this fix has been made in the open source): 0.01 + v * 0.99.
AudioSystem.java:
- correct typo in comment
IAudioflinger, IAudioFlingerClient:
- make AudioFlinger binder interfaces used for callbacks ONEWAY.
AudioHardwareInterface:
- correct routeStrings[] table in AudioHardwareInteface.cpp
