Fix problem with ignored sensor events right after screen turns on.
Do not flash button backlights when device is booting.
Process the first light sensor change after waking the screen immediately rather than debouncing.
Cancel mAutoBrightnessTask when light sensor is disabled.
Change-Id: Iffc5e090b239432b7643812fa8ecb5f69da1679d
Signed-off-by: Mike Lockwood <lockwood@android.com>
Merge commit 'd7786b41b78ba8592daea708b024b5a75e441992' into eclair-plus-aosp
* commit 'd7786b41b78ba8592daea708b024b5a75e441992':
Power Manager support for light sensor backlight management.
Fiddle around with the offsets of wallpapers to have better defaults, and
update the offset when the currently wallpaper target is not setting an
offset itself.
Change-Id: I1864d098fb4813fb0c67857af8ebf398b35e6876
Merge commit 'f37447bad3773b62176baa837908daf6edb44273' into eclair-plus-aosp
* commit 'f37447bad3773b62176baa837908daf6edb44273':
Proper fix for zero signal strength and no_service. Fixes#2176141
Track phone service state changes and use a separate timer for out-of-service
since the hunting can timeout on some devices.
Store the timeout value in the config.xml, as it is device/network specific.
Settings App will also change to use the hunting duration to compute the cost
of zero signal.
* changes:
do not merge Return valid package info for packages that have been uninstalled with an option to retain data and resources using the flag GET_UNINSTALLED_PACKAGES These packages do not have a package setting. just check the flag and return the required info from PackageParser.generatePackageInfo
Merge commit '0b08abe1b8e4f49cfaefb8226696664ad3d5ca6a' into eclair-plus-aosp
* commit '0b08abe1b8e4f49cfaefb8226696664ad3d5ca6a':
Register for light sensor events if non-hardware based auto-brightnees is enabled
We will use the System.SCREEN_BRIGHTNESS_MODE Settings value instead.
Add SCREEN_BRIGHTNESS_MODE_MANUAL and SCREEN_BRIGHTNESS_MODE_AUTOMATIC constants.
Change-Id: I01935be3fcb48cf76392d2c594205cb47babc5b2
Signed-off-by: Mike Lockwood <lockwood@android.com>
Merge commit '034cd0be57d76b3bf5c7a3c118f6f10e67755772' into eclair-plus-aosp
* commit '034cd0be57d76b3bf5c7a3c118f6f10e67755772':
Fix bug 2183179 - Hitting the back key repeatedly makes the notification shade jump up and down
This thing needs to be rewritten. It's grown too complicated for what it's doing,
and I don't like the physics anyway.
Also, this leaves the bug where if you press back while it's animating down, the
animation is ignored. However it no longer jumps down all the way, it just
essentially ignores the back key.
Also, this makes the collapse get executed on the back key up event, so it works
with the swipe on the soft keys at the bottom of the screen.
Return valid package info for packages that have been uninstalled with
an option to retain data and resources using the flag GET_UNINSTALLED_PACKAGES
These packages do not have a package setting. just check the flag and return
the required info from PackageParser.generatePackageInfo
Merge commit '37a13208c93bbe00cf233baf1ebcd6e081972a27' into eclair-plus-aosp
* commit '37a13208c93bbe00cf233baf1ebcd6e081972a27':
Add separate configuration flag for hardware ALS support.
A new flag config_hardware_automatic_brightness_available indicates
that the device has hardware support for automatic screen brightness management,
while config_automatic_brightness_available now indicates that automatic
brightness mode is available in general.
If config_automatic_brightness_available is true but config_hardware_automatic_brightness_available is false,
then automatic brightness mode support in PowerManager support will be used.
Bug b/2015734 (Ambient light sensor support in power manager)
Change-Id: I6cd888252043dd63df3c25a1d14c21a04a91ad28
Signed-off-by: Mike Lockwood <lockwood@android.com>
Merge commit 'cbf77e9bef0db68c55b60994d93674bf6fd1ca13' into eclair-plus-aosp
* commit 'cbf77e9bef0db68c55b60994d93674bf6fd1ca13':
Another fix for #2186897: Cannot unlock the device by swiping
Merge commit 'b10e2f1a861933f50d9ad8ea24b5dfa5643a2c11' into eclair-plus-aosp
* commit 'b10e2f1a861933f50d9ad8ea24b5dfa5643a2c11':
Fix issue #2186709: Can't unlock the device for a while
Merge commit '2a21a77d5cf481b129a7cb4e3e00424e4d300e6d' into eclair-plus-aosp
* commit '2a21a77d5cf481b129a7cb4e3e00424e4d300e6d':
Work on issue #2144454: Inconsistent swipes...
This introduces some hacks in the framework to try to clean up the
data we are getting from the touch screen. There are two main things
being done here:
1. Look for changes in position that are unreasonably large, and
ignore them. This is intended to eliminate the spurious jumps that
often happen when releasing.
2. Add some simple adaptive averaging of the touch data. If the
difference between the last and next point is large enough, we
disable the averaging; otherwise we average up to the last 5 points.
The goal is to get rid of the noise of small movements so that things
like taps don't look like short flings, while still responding quickly
to rapid movement.
For averaging pressure, we also weight each averaged coordinate by
the reported pressure at that point. This is intended to keep the
coordinates closer together during a release, when the pressure is
going down and the accuracy decreasing. It may also result in some
other interesting artifacts, but hopefully nothing problematic.
Change-Id: I1369e9ab015c406946a45c2d72547da9c604178f
Merge commit '16cb04ab1cd88d917fdd34a9063fe4a9707aa5b1' into eclair-plus-aosp
* commit '16cb04ab1cd88d917fdd34a9063fe4a9707aa5b1':
Add a little logging to diagnose wifi cycle bug
Merge commit 'f836acf241f10d943d72d439fa425fda73a6d56b' into eclair-plus-aosp
* commit 'f836acf241f10d943d72d439fa425fda73a6d56b':
Fix issue #2179931: Power key to wake up frequently ignored when in dock app
TokenWatcher.acquire() synchronizes on mTokens, not this,
so we need to synchronize on mKeyguardDisabled in disableKeyguard()
to synchronize properly with reenableKeyguard().
This should fix b/2180142 (Stuck in enable keyguard when receiving phone call)
Change-Id: Iad66a2748c7fbf2c516fdb8a00988696719ea80c
Signed-off-by: Mike Lockwood <lockwood@android.com>
The dock app is forcing the screen to a particular brightness level. This
causes the window manager to often call into the power manager with the
new brightness. This causes us to go in to updateLightsLocked() to figure
out and apply the real brightness to use. When the screen is off the
real brightness always remains 0, but even if it didn't change from the
last one we would start an animation which would when done put the system
to sleep and fight with the user trying to turn the device on.
Now, if the new target brightness is the same as the last one, we leave the
animation as-is -- either running or not as appropriate.
Change-Id: I067d55ea2b39e294c5d5291587a4d8727c0b8083
Merge commit '98e0b146b80670b52805b4b210ef5582dad6bb68' into eclair-plus-aosp
* commit '98e0b146b80670b52805b4b210ef5582dad6bb68':
Make PhoneStateListeners not call TelephonyManager
Since the StatusBarPolicy is run in the System Process and shouldn't therefore call into
the Telephony process we decided to make sure all the needed info was passed along with the
original notifications.
bug: 2173053
Merge commit '2c6c5e6e49795e6e24cd089c9018377d837ba931' into eclair-plus-aosp
* commit '2c6c5e6e49795e6e24cd089c9018377d837ba931':
Fix issue #2176944: Need API so browser, others can determine memory size of device
- Don't crash if the service's app process doesn't have a thread (this
can happen if we are currently starting the process and then try to
start the service again).
- Be more robust about deciding to start a service's process: try each
time it is started; the startProcess call will take care of ignoring
it if the process is already started.
- Fix some issues where we would leave dead processes on the low memory
list.
Change-Id: I490e01ba7b45adc191bab7ace377b6873e284897
Merge commit '348b92bd513087369ac682e29620d7829fa1381b' into eclair-plus-aosp
* commit '348b92bd513087369ac682e29620d7829fa1381b':
GPS: Fix problem with SUPL when SUPL APN is already active.
Use ConnectivityManager.CONNECTIVITY_ACTION broadcast in LocationManagerService
to notify GPS when SUPL connection is ready instead of TelephonyIntents.ACTION_ANY_DATA_CONNECTION_STATE_CHANGED,
which is not sent in all cases.
Expand LocationProvider.updateNetworkState() to include NetworkInfo object.
Fixes bug b/2155661
Change-Id: Iee227ace7d536b36cf7973e3e6a8b7a621ce6565
Signed-off-by: Mike Lockwood <lockwood@android.com>
Merge commit '33e21fcc99dd91061ea245984c4e9a1544cb943f' into eclair-plus-aosp
* commit '33e21fcc99dd91061ea245984c4e9a1544cb943f':
Control H icon display in Status bar.
In LocationManagerService if a LocationListener is removed while it has
a pending broadcast the wake lock held while pending broadcasts are
outstanding do not get cleared properly.
There are 2 cases of this race that are fixed:
1. locationCallbackFinished was changed to check the mReceivers HashMap
directly instead of calling getReceiver. getReceiver would add the
ILocationListener as a new Receiver if it did not exist which caused
a receiver that was removed when it still had a broadcast pending to
be added back in a bad state when the pending broadcast completed.
2. removeUpdatesLocked was changed to decrement the pending broadcasts
when a Receiver is removed that has pending broadcasts.
Fixes bug b/2163871
Change-Id: I50a321c9b3359bf69845236dc4a4b9e38e847335
Signed-off-by: Mike Lockwood <lockwood@android.com>
Merge commit 'b134b2038ecabcbec3f9b657834d45de27707068' into eclair-plus-aosp
* commit 'b134b2038ecabcbec3f9b657834d45de27707068':
More fix#2163209: alarm clock rings but is hidden behind lock screen
There was another way we could ignore the application windows flags
while the lock screen was displayed. This is the infrastructure to
deal with that.
Change-Id: Id8c9cb2f7081df6757ccb797a7cde618e82f7b38
