The the android.telecom.Call.Details class provides its own equals
implementation. Recently added in M is to also check if the mExtras
and mIntentExtras are different. Unfortunately, Bundles do not implement
equals. As a result when Telecom calls are parceled and sent to the
InCallServices, this means that the internalUpdate method will always
assume that the Details of a call have changed, even if they have not.
This was causing a LOT of extra calls to onUpdate in the InCall UI (2x the
amount). Although there is still room for improvement in the number of
callbacks from Telecom, this fix prevents a pretty significant regression
on that front.
Bug: 23218195
Change-Id: I128e996faf60376ed3df1dc848a97c4a7b0482ee
Since the Call API's callbacks are now fired from handlers, they end up
changing the order in which the callbacks from the Phone and Call API's
are fired. To preserve the below ordering, we move the call removal from
Phone's db to after all the onCallDestoryedcallbacks have executed.
1. Call->onStateChanged
2. Call->onDetailsChanged
3. Call->onCallDestroyed
4. Phone->onCallRemoved
BUG: 22127504
Change-Id: Ice17f727decb516baabbe69adae598ebdf370094
Two major changes:
1) Add the notion of extras to a Connection. These extras will be
parceled through to InCallService as Call.getExtras()
2) The previously existing Call.getExtras() has been renamed to
getIntentExtras(). This name better describes the fact that these
particular extras are from the original CALL or INCOMING_CALL intents.
Change-Id: I08c1baf4f08d54757f98012f0c08b423a707c53d
Including a fromProfile in addition to the requestedProfile.
- Changed VideoCallImpl to generate the fromVideoProfile based on the
call's current videoState. This ensures the InCall UI only needs to
pass in the new video profile; the VideoCall Impl already has enough
knowledge to generate the fromProfile.
- Changed VideoCallImpl to track the current videoQuality, which forms
a part of the fromVideoProfile.
Bug: 20704229
Change-Id: I89f293f03a2b13fc8c1dcfd8a07ab8640d3950e0
Deprecate the existing Listener methods and interfaces so that they
can be replaced.
Bug: 20160491
Change-Id: I11c104c625b03751f3792fc4367883c18c6e2d54
The current code assumes that only a single instance of VideoCall will be
provided to the default system InCall UI. Ideally multiple
InCallService implementations should be able to use the VideoCall APIs.
Note: it only really makes sense for a single InCallService to get/set
the video surfaces.
- Fixed bug in ParcelableCall which would cause a new instance of
VideoCallImpl to be created every time a call is updated from Telecom.
Added a flag to ParcelableCall to indicate whether the parcel includes a
change to the video provider information, which is used when unparceling
to determine whether to set/create the video call impl.
- Renamed "setVideoCallback" to "addVideocallback".
- Modified Connection.VideoProvider code to keep a list of Video callbacks
and fire off all of them when Video Provider changes occur.
Bug: 20092420
Change-Id: Ic16b6afe1b7532cc64d006c133adbae57946d97d
557d2f5 Merge "Add ConnectivityManager.reportNetworkConnectivity() API" into m-wireless-dev
ab5267a Fix onLost/onFound logic in isSettingsAndFilterComboAllowed
bfd17b7 Add ConnectivityManager.reportNetworkConnectivity() API
238e0f9 OBEX Over L2CAP + SDP search API for BT profiles
31a94f4 Add ConnectivityManager.getActiveNetwork(). Rework NetID allocation in ConnectivityService so registerNetworkAgent() can return the allocated NetID.
bf18bed Merge "Non-functional code cleanup of ConnectivityService." into m-wireless-dev
db8784e Merge "Cleanup of Video Call pause functionality." into m-wireless-dev
e75b9e3 Non-functional code cleanup of ConnectivityService.
e593d0a Onfound onlost feature.
0326f58 Merge "API for config app." into m-wireless-dev
e9b056f API for config app.
d5351e7 RTT framework interface update
582b868 Unhide Network.openConnection(URL, Proxy).
0d719ca Fix typos in ConnectivityManager documentation.
Change-Id: Ib4c88f6d7ad1b24227b032555c62a5804194384b
Whether the paused videoState is available is dependent on the carrier's
implementation of the VT spec. The original VT implementation assumed
that this was stored in a system property accessed via InCall; these CLs
move this to a Call/Connection capability which will ultimately support
multisim video capable devices.
- Added new connection/call capabilities.
Bug: 16680364
Bug: 19820114
Change-Id: I3840f92270100811161120dffcfe297bef7c4ea2
-Add isVideo API to VideoProfile.VideoState
IMS-VT: Fix propagation of device orientation.
Orientation received at VT Service is incorrect.
Fixed propagation of device orientation to VT service.
IMS-VT: Upgrade fix
-Add session modify call timed out constant
Notify listeners of video quality changed event
- Propagate the video quality changed message to the UI.
IMS: Add support for video quality
- Add Config interface to get/set video quality
IMS-VT: Multitasking feature
-Support for video multitasking
IMS-VT: Modification of data usage aidl
Change data usage aidl interface to take parameter type long
instead of int
Change-Id: I7cda2a689edb86d025dfe8efc8f573918c4bd6bc
Propagate the call substate changed message to the UI
IMS-VT: Add call modifiable capability
PhoneCapababilities call type modifiable constant added
IMS-VT: Add a bit mask CALL_SUBSTATE_ALL with all call substate bits set
IMS-VT: Enable Video conferencing.
Enable Video conferencing.
Change-Id: I4240aa6f32c75d6eea8a41da3c87bca651f0901b
IMS-VT: Add hide for setVideoProvider API
Observed compilation error for SDK generation due to setVideoProvider
API. Marking setVideoProvider as hide inorder to resolve the
compilation error.
IMS-VT: Add persist.radio.ims.audio.output for VT calls
-- Add persist.radio.ims.audio.output to set the default speaker
for VT calls.
-- Add required constants
IMS-VT: Add additional error codes for upgrade downgrade
-Add support to send additional error codes to UI during
upgrade downgrade.
Change-Id: Id452d225098fe3bccdcd37d242985c5c761144c1
- Adding new Connection/Call capability: CAPABILITY_SHOW_CALLBACK_NUMBER.
- Used in Telephony to indicate on an incoming call that the callback
number should be shown.
Bug: 18689292
Change-Id: I1ab3baf9f0d5a22c4b01e6504e88d496182e01c7
This provides more granular API support for representing the mix of
state and capabilities of local and remote video clients. For our
implementation, we are primarily concerned with bidirectional video
calling. But, this provides support for representing certain error
scenarios, and flexibility for other parties which may desire to
implement one-way video calling.
Change-Id: I0373ffd377c3547fa8dd98ab5fde4f8d616a1d2f
This is a more specific and less technology-specific title for
communicating this to Dialer/InCall.
Bug: 18103173
Change-Id: I70ad50bb09eb807a621259976bb9fb7953a9a8aa
Modify the phoneAccountSelected method to support the option to set the
selected phone account as the default for outgoing phone calls.
Bug: 18078232
Change-Id: I2689bc9611366d521dfd3dc2086fd31eb6393876
- Adding disconnecting state to telecom used to communicate that a call is
being disconnected to InCall UI (rather than it existing only as a state
in the InCall UI).
Bug: 17821930
Change-Id: I6c2d9521915ba154c0468eea62c12c30060edd2e
In order to create a DisconnectCause with a label/description that does
not require specifying a tone.
Bug: 17486242
Change-Id: If82605ff20fc9f53ed41b49e12575424c6efc2b6
Hide getCallCapablePhoneAccounts and getPhoneAccountsSupportingScheme
because a third party app should not be able to see all phone accounts
registered. Replace instead with getPhoneAccountsForPackage(Context)
which will only return the phone accounts registered by a particular package.
Bug: 17510811
Change-Id: I8465ef4f13b62fe83f51835cfffe1656298041a8
+ Add a hidden "UNKNOWN" default type to ToneGenerator.
- Hide the Telephony DisconnectCause from the public API.
+ Add a Telecomm DisconnectCause. This is parcelable, and contains
information (code, user facing message, non-user facing reason,
and tone) to help describe the disconnect state and what behaviors
an application can implement for the user experience. This reduces
the causes for a disconnect to a more generic set.
+ Lots of work to pipe this through. DisconnectCause replaces the
code and message which were formerly passed around.
Bug: 17241433
Bug: 17329632
Change-Id: I9d337e478a8784bcc0ade02267c2df52cac9bf17
- Changing package from android.telecomm to android.telecom
- Changing package from com.android.telecomm to
com.android.server.telecomm.
- Renaming TelecommManager to TelecomManager.
Bug: 17364651
Change-Id: I192cb5d189f55db012ea72ee82ccc5aedbc21638
