In DrmManager, we currently lock both processDrmInfo() and onInfo() which is
ok for now since processDrmInfo() is async call, and it will return without
waiting for onInfo() call. However, if we send an event in processDrmInfo(),
we will got deadlock here because we need to invoke onInf() which will wait
for processDrmInfo() to release the lock. Use different lock for onInfo().
- Remove some redundent mutex lock.
Change-Id: I59c794f95ba1693425723224114fa975cf9b235f
Modifies Stagefright to verify that there is a hardware-protected path
to video sink for DRM content.
Change-Id: I18b8741390e803a05a88c7f180b860a24ba88a10
Associate each motion axis with the source from which it comes.
It is possible for multiple sources of the same device to define
the same axis. This fixes new API that was introduced in MR1.
(Bug: 4066146)
Fixed a bug that might cause a segfault when using a trackball.
Only fade out the mouse pointer when touching the touch screen,
ignore other touch pads.
Changed the plural "sources" to "source" in several places in
the InputReader where we intend to refer to a particular source
rather than to a combination of sources.
Improved the batching code to support batching events from different
sources of the same device in parallel. (Bug: 3391564)
Change-Id: I0189e18e464338f126f7bf94370b928e1b1695f2
This change adds a new 'method' to the ANativeWindow interface to check
whether buffers queued to the window will be sent directly to the system
window compositor.
Change-Id: I4d4b199e328c110b68b250029aea650f03c8724d
Bug: 3495535
This change fixes the stability problems experienced when using
a bluetooth headset supporting both A2DP and SCO. Problems occur
when starting the video chat at which time the A2DP output is being
stopped to start SCO. At that time, active AudioTracks are invalidated
by AudioFlinger so that a new AudioTrack binder interface can be
recreated by the client process on the new mixer thread with correct parameters.
The problem was that the process to restore the binder interface was not
protected against concurrent requests which caused 2 binder interfaces
to be created sometimes. This could lead to permanent client deadlock
if one of the client threads was waiting for a condition of the first
created binder interface while the second one was created (as the AudioFlinger
would only signal conditions on the last one created).
This concurrent request situation is more likely to happen when a client
uses the JAVA AudioTrack as the JNI implementation uses simultaneously the
native AudioTrack callback and write push mechanisms. By doing so, the code
that checks if the binder interface should be restored (in obtainBuffer()) is
much more likely to be called concurrently from two different threads.
The fix consists in protecting the critical binder interface restore phase
with a flag in the AudioTrack control block. The first thread acting upon the binder
interface restore request will raise the flag and the second thread will just wait for
a condition to be signaled when the restore process is complete.
Also protected all accesses to the AudioTrack control block by a mutex to prevent
access while the track is being destroyed and restored. If a mutex cannot be held
(e.g because we call a callback function), acquire a strong reference on the IAudioTrack
to prevent its destruction while the cblk is being accessed.
Modified AudioTrack JNI to use GetByteArrayElements() instead of
GetPrimitiveArrayCritical() when writing audio buffers. Entering a critical section would
cause the JNI to abort if a mediaserver crash occurs during a write due to the AudioSystem
callback being called during the critical section when media server process restarts.
Anyway with current JNI implementation, either versions do not copy data most of the times
and the criticial version does not guaranty no data copy.
The same modifications have been made to AudioRecord.
Change-Id: Idc5aa711a04c3eee180cdd03f44fe17f3c4dcb52
Bug #3461349
This change also fixes two bugs that prevented partial invalidates
from working with other views. Both bugs were in our EGL implementation:
they were preventing the caller from comparing the current context/surface
with another context/surface. This was causing HardwareRenderer to always
redraw the entire screen.
Change-Id: I33e096b304d4a0b7e6c8f92930f71d2ece9bebf5
Ensure that the joystick can always reach -1.0, 0.0 and 1.0 positions
even when noise filtering is applied. (Bug: 3514510)
Add support for a few more standard axes.
Add additional mapping modes for axes.
Some axes are inverted from standard interpretation
or are actually intended to be split into two distict axes
such as left/right trigger controls or accelerator/brake.
Add key layout file for a G25 racing wheel and XBox 360 controller
to tweak behavior. They work fine without them but the axis mappings
are not ideal.
Change-Id: I0fddd90309af4dc14d35f34fe99ed6e521c0b7c7
Added some plumbing to enable the policy to intercept motion
events when the screen is off to handle wakeup if needed.
Added a basic concept of an external device to limit the scope
of the wakeup policy to external devices only. The wakeup policy
for internal devices should be based on explicit rules such as
policy flags in key layout files.
Moved isTouchEvent to native.
Ensure the dispatcher sends the right event type to userActivity
for non-touch pointer events like HOVER_MOVE and SCROLL.
Bug: 3193114
Change-Id: I15dbd48a16810dfaf226ff7ad117d46908ca4f86
- To track the currently used audio device
- The devices are separated as speaker and other audio devices
- Provide the collected data to battery application through pullBatteryData()
Change-Id: I374c755266b5ac6b1c6c630400f4daf901ea8acc
Fades out the mouse pointer:
- after 15 seconds of inactivity normally
- after 3 seconds of inactivity in lights out mode
- after a non-modifier key down
- after a touch down
Extended the native Looper to support enqueuing time delayed
messages. This is used by the PointerController to control
pointer fade timing.
Change-Id: I87792fea7dbe2d9376c78cf354fe3189a484d9da
This change adds a new query to ANativeWindow for getting the minimum
number of buffers that must be left un-dequeued during the steady-state
operation of the ANativeWindow.
Change-Id: Ie8c461fc26b02ecde02ddb4f95bf763662cf1551
Related-Bug: 3356050
This change defines an OpenMAX IL API for querying from the IL component
the gralloc buffer usage flags that should be used to allocate the
buffers. It also adds the Stagefright plumbing for using the new OMX IL
API.
Change-Id: I046b5e7be70ce61e2a921dcdc6e3aa9324d19ea6
Related-Bug: 3479027
There are two areas that have changed to eliminate the assumption that
local jobject references are both canonical and persistent:
1. JavaBBinderHolder no longer holds onto and reuses it parent object
reference per se. Since the underlying JavaBBinder object holds a
real global ref, this was redundant anyway. Now, for purposes of its
transient need to perform JNI operations, it simply uses the current
jobject ref(s) passed during method invocation, and no longer attempts
to hold these refs beyond the scope of a single invocation.
2. Binder obituaries no longer assume that a jobject reference to a
recipient will always compare == as a 32-bit value with any future
reference to the same object. The implementation now asks Dalvik
whether object references match.
This amended patch fixes the earlier bug around races between
remote binder death cleanup and local explicit unregistration of
VM-side death recipients.
Bug 2090115
Change-Id: I70bd788a80ea953632b1f466f385ab6b78ef2913
some of the conversion operators were not using the proper
pointer type when calling incStrong/decStrong, usually it
has no bad consequences, but for some implementation
of the ref-counted object it could lead to recording the wrong
owner id.
Change-Id: If574b9069b8a4cf6e0911a992c8f095aba799995
this was introduced recently. we make sure to use
the correct owner id (the sp) instead of the wp.
Change-Id: I78fdc6ec0c2d3e687278b70442d74d1924b512a2
There are two areas that have changed to eliminate the assumption that
local jobject references are both canonical and persistent:
1. JavaBBinderHolder no longer holds onto and reuses it parent object
reference per se. Since the underlying JavaBBinder object holds a
real global ref, this was redundant anyway. Now, for purposes of its
transient need to perform JNI operations, it simply uses the current
jobject ref(s) passed during method invocation, and no longer attempts
to hold these refs beyond the scope of a single invocation.
2. Binder obituaries no longer assume that a jobject reference to a
recipient will always compare == as a 32-bit value with any future
reference to the same object. The implementation now asks Dalvik
whether object references match.
Bug 2090115
Change-Id: If62edd554d0a9fbb2d2977b0cbf8ad7cc8e2e68d
First slipt sp<> out of RefBase into StrongPointer.h so it can be reused
more easily and to make it clear that it doesn't require RefBase.
Note: the rest of the change only affects the system when DEBUG_REFS is enabled.
The main problem we fix here is that the owner id associated with each
reference could get out of date when a sp<> or wp<> was moved, for
instance when they're used in a Vector< >.
We fix this issue by calling into RefBase::moveReferences from
a template specialization for sp<TYPE> and wp<TYPE> of the
type helpers. RefBase::moveReferences() has then a chance to
update the owner ids.
There is a little bit of trickery to implement this generically in
RefBase, where we need to use a templatized functor that can turn
a sp<TYPE>* casted to a void* into a RefBase*.
Introduced a new debug option DEBUG_REFS_FATAL_SANITY_CHECKS
currently set to 0 by default as there seem to be an issue
with sp<ANativeWindow> which trips the sanity checks.
Change-Id: I4825b21c8ec47d4a0ef35d760760ae0c9cdfbd7f
This change enables the use of a SurfaceTexture in place of a Surface
as the video sink for an android.media.MediaPlayer. The new API
MediaPlayer.setTexture is currently hidden.
This includes:
- New Java and C++ interfaces
- C++ plumbing and implementation (JNI, Binder)
- Stagefright AwesomePlayer and NuPlayer use ANativeWindow
(either Surface or SurfaceTextureClient)
Change-Id: I2b568bee143d9eaf3dfc6cc4533c1bebbd5afc51
related-to-bug: 3474610
Change-Id: I6dab40e8b465922c62be9ee7f168718822c6caac
Now skipping extra header that the spec claimed shouldn't be present in LATM...
Added API on InputDevice to query the set of axes available.
Added API on KeyEvent and MotionEvent to convert keycodes and axes
to symbolic name strings for diagnostic purposes.
Added API on KeyEvent to query if a given key code is a gamepad button.
Added a new "axis" element to key layout files to specify the
mapping between raw absolute axis values and motion axis ids.
Expanded the axis bitfield to 64bits to allow for future growth.
Modified the Makefile for keyboard prebuilts to run the keymap
validation tool during the build.
Added layouts for two game controllers.
Added default actions for game pad button keys.
Added more tests.
Fixed a bunch of bugs.
Change-Id: I73f9166c3b3c5bcf4970845b58088ad467525525
o do not use edts/elst boxes since these optional boxes are ignored
o manipulate the first video/audio frame duration to make sure that the rest
of the audio/video is in sync (ideally, we should only manipulate
the vidoe frame duration, not the audio)
o reduce the initial audio mute/suppression period, which is used to
eliminate the "recording" sound.
bug - 3405882 and 3362703
Change-Id: Ib0acfb4f3843b365157288951dc122b006299c18
