This will allow us to inspect the paint for thing other than
color and xfermode, such as SkColorFilters and SkShaders.
bug: 10650594
Change-Id: I2c3ddd07a3966e1e77af34136307e2b59b2898c1
Move the projection surface to be a property of a DisplayList,
set to true for every background drawable.
Additionally, handle a projecting view background such that it doesn't
try to project onto itself (which is undesirable).
Change-Id: Ic70b17474bd87340e80767f8518f73b233419c7a
Somewhat unifies the ortho/perspecive paths - the property matrix
(translate/scale/rotate) is now always a Matrix4.
Change-Id: I36e4fe83d1150ee6e4be5f64f34d0fc8d6525cc6
IsContainedVolume -> hasIsolatedZVolume conveys that this affects Z
ordering of views
ProjectToContainedBackground -> ProjectBackwards, since it ended up
using its own projection target, separate from the 3d volume bit
Change-Id: Ia2cde838cc4da134366fe6ff623290fbd65e50c3
bug:12581401
Adds temporary logging which should log/crash earlier on incorrectly
reordering hierarchies.
Change-Id: Iee00940718c3cc868161e754aff93cd3b2747094
The ortho projection can't handle 3d translation, so skip that step if
perspective projection isn't enabled.
Change-Id: I231e6bcecc82e876b697e098e034f0fd3b06efde
For now, ancestor views signal the acceptance of projections with a
save(0x20)/restore pair.
During the order traversal, each view with the save(0x20) code will
collect descendent views with mProjectToContainedVolume (which still
needs to be renamed) so that they can be drawn out of order later.
- *Temporary* sample code added to HwAccelerationTest.
- Note that a projected displaylist must not be clipped.
Change-Id: I45c493e845961535b958d59c53e8aff3f8891d9f
This will eventually serve as a base class to allow
DisplayListRenderer to split off from OpenGLRenderer, and could
eventually support other rendering approaches, such as an
SkCanvas/SkPicture.
This will also be the main source of (implementation-independent)
documentation of the canvas/renderer methods.
Change-Id: I52047f338f5cf86a3b0b3002af7154bff5c3c227
True 3d transformations are now supported by DisplayLists and the
renderer, initially with the translationZ property on view.
Renderer operations used directly by DisplayList (formerly,
clip/save/restore/saveLayer) are now more simply managed by allocating
them temporarily on the handler's allocator, which exists for a single
frame. This is much simpler than continuing to expand the pool of
pre-allocated DisplayListOps now that more operations are called
directly by DisplayList, especially with z ordered drawing.
Still TODO:
-APIs for camera positioning, shadows
-Make Z apis public, and expose through XML
-Make invalidation / input 3d aware
Change-Id: I95fe6fa03f9b6ddd34a7e0c6ec8dd9fe47c6c6eb
bug:4351353
quickReject and quickRejectNoScissor have been renamed and refactored:
- to make the scissor side effect clear and explicit
- dangerous methods no longer public
- to make the simple quick reject check logic const
- simple quick reject is now conservative
This CL also fixes several issues with line and point quickRejection -
sub-pixel and hairline lines are much less likely to be incorrectly
rejected, especially at small canvas scale.
Additionally, alpha modulation for AA points < 1px in size is now
correct, dumplicating SW behavior (similar to lines and stroked
shapes work).
Change-Id: Ibb0710c721b9fb415d05acf54dd3d2b4d602156a
This change adds refcounting of Res_png_9patch instances, the native
data structure used to represent 9-patches. The Dalvik NinePatch class
now holds a native pointer instead of a Dalvik byte[]. This pointer
is used whenever we need to draw the 9-patch (software or hardware.)
Since we are now tracking garbage collection of NinePatch objects
libhwui's PatchCache must keep a list of free blocks in the VBO
used to store the meshes.
This change also removes unnecessary instances tracking from
GLES20DisplayList. Bitmaps and 9-patches are refcounted at the
native level and do not need to be tracked by the Dalvik layer.
Change-Id: Ib8682d573a538aaf1945f8ec5a9bd5da5d16f74b
bug:8965976
Also consolidates quickReject scissor-ing and scissor-less paths.
Renamed plain 'quickReject' method, as it has sideEffects beyond what
the java and skia canvases do.
Change-Id: I4bdf874d3c8f469d283eae1e71c5e7ea53d47016
Previously, when a DisplayList operation was rejected because it was not
in the clip bounds, the code would not properly restore the previous
state, leading to errors in alpha values of the noop'd op being applied
to unrelated operations later in the DisplayList.
Issue #9051935 Flash of grey background when transitioning to conversation view
Change-Id: I56645cc9ebf2e07be0228ca5e249213dbeb10d7d
bug:8875715
Additionally moves op logging before the op is executed, to print
correctly, in pre-order traversal
Change-Id: I4e9566261f8363c73739d183e6d82b854f72ffad
Sometimes views that are scaled leave behind rows/columns on the
screen as they move/scale around.
The problem was that the pivot point around which the scale takes place
(in the default case of scaling around the center of the view)
was getting truncated to integer coordinates in the display list.
Meanwhile, the pivot point at the Java level was using the true float
values, resulting in a mis-match between the invalidation rectangle
(computed at the Java level) and the drawing-operation rectangle (computed
at the native level).
This only occurred when views had odd bounds (thus the integer representation
of the center differed from the float representation of the center), and only
when some other drawing operation would expand the clip rect to allow the
incorrect drawing operation (using the wrong pivot point) to draw outside of
its clip boundaries.
Issue #8617023 7x7 screen not updated correctly
Change-Id: If88889b9450d34535df732b78077a29b1f24802d
The rendering code optimizes by rejecting drawing operations that
lie outside of the bounds of their views. This works in most
situations, but breaks down when containers have called
setClipChildren(false), because we reject drawing that is outside
of that container, but which should be drawn anyway.
Fix is to pass in the value of that flag to the DisplayList drawing
routines which take that flag into account when deciding whether
to quickReject any particular operation.
Issue #8659277 animation clipping
Change-Id: Ief568e4db01b533a97b3c5ea5ad777c03c0eea71
Merge simple bitmap draw operations and text operations to avoid
issuing individual gl draws for each operation. Merging other ops to
be done eventually.
The methods are different - the bitmap merging generates a single
mesh for reused, unclipped images (esp. repeated images in a listview)
The text approach queries just defers the normal font rendering until
the last drawText in the sequence that can share the same shader.
Patches are sorted and merged, but don't yet have a multiDraw
implementation. For now, the pretending-to-merge gives better sorting
behavior by keeping similar patches together.
Change-Id: Ic300cdab0a53814cf7b09c58bf54b1bf0f58ccd6
bug:8501661
Makes the performance issues and interaction with layer type/paint
more clear.
Additionally, corrects change from 47ab7d6612e2b5b8b66fb261dafef7c91264e173
to still allow displayList alpha to override layer paint
Change-Id: Ic94d75865700820489370461cd8ac9f9077a8d90
bug:8409891
Snapshots frequently have their clip overwritten due to applying
deferred state - now, store tiling clip information in a separate
rect, outside of the snapshot so it isn't overwritten.
Change-Id: I21ca4c45dcd802eae99e8de86f11525196777ccb
bug:8409891
In order to defer fbo-targetting saveLayer operations, it's necessary
to update the snapshot at defer time so that deferred display state
(namely, clip and transform) are fbo relative.
Re-enables deferring, as the issues with saveLayer are fixed.
Change-Id: I74b0779bc732675c747208f0757c3ea85f6dfbed
This change will greatly simplify the multi-threading of all
shape types.
This change also uses PathTessellator to render convex paths.
Change-Id: I4e65bc95c9d24ecae2183b72204de5c2dfb6ada4
Removes mMultipliedAlpha, using the snapshot alpha for all
non-overlapping display list alpha control.
Additionally, fixes opacity issues where children of
hasOverlappingRendering=false displaylists (both hw layer sublists and
other sublists with hasOverlappingRendering=false)
Change-Id: I6adc16da855835f9f518f8967628e5d0135c789b
bug:8037003
A recursive drawDisplayList call is now entirely deferred before
playing back to the screen and issuing GL commands. This way, the
entire stream can be inspected, optimized, and batch work (such as
uploading textures) before issuing commands.
Additionally, this fixes an issue where operations draw could move
across restores corresponding to saveLayer(alpha). Those and other
similar cases (such as complex clipping, requiring the stencil) are
now treated as batching barriers, with the operations that change
renderer state in a way that's difficult to defer are just re-issued
at flush time.
Change-Id: Ie7348166662a5ad89fb9b1e87558334fb826b01e
