drgreen/android_frameworks_base
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
android_frameworks_base/services/input/InputDispatcher.h

1158 lines
44 KiB
C
Raw Normal View History

Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
/*
* Copyright (C) 2010 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef _UI_INPUT_DISPATCHER_H
#define _UI_INPUT_DISPATCHER_H
#include <ui/Input.h>
#include <ui/InputTransport.h>
#include <utils/KeyedVector.h>
#include <utils/Vector.h>
#include <utils/threads.h>
#include <utils/Timers.h>
#include <utils/RefBase.h>
#include <utils/String8.h>
Replace epoll() with poll() and rename PollLoop to Looper. As part of this change, consolidated and cleaned up the Looper API so that there are fewer distinctions between the NDK and non-NDK declarations (no need for two callback types, etc.). Removed the dependence on specific constants from sys/poll.h such as POLLIN. Instead looper.h defines events like LOOPER_EVENT_INPUT for the events that it supports. That should help make any future under-the-hood implementation changes easier. Fixed a couple of compiler warnings along the way. Change-Id: I449a7ec780bf061bdd325452f823673e2b39b6ae
2010-09-13 23:17:30 -07:00
#include <utils/Looper.h>
Add suuport for splitting touch events across windows. This feature is currently used to enable dragging the start and end selection handles of a TextView at the same time. Could be used for other things later. Deleted some dead code in ArrowKeyMovementMethod and CursorControllers. Change-Id: I930accd97ca1ca1917aab8a807db2c950fc7b409
2010-09-26 22:20:12 -07:00
#include <utils/BitSet.h>
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
#include <stddef.h>
#include <unistd.h>
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
#include <limits.h>
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
Prevent events from getting backlogged. This change implements two heuristics. 1. When events are older than 10 seconds, they are dropped. 2. If the application is currently busy processing an event and the user touches a window belonging to a different application then we drop the currently queued events so the other application can start processing the gesture immediately. Note that the system takes care of synthesizing cancelation events automatically for any events that it drops. Added some new handle types to allow the native dispatcher to indirectly refer to the WindowManager's window state and app window token. This was done to enable the dispatcher to identify the application to which each window belongs but it also eliminates some lookup tables and linear searches through the window list on each key press. Bug: 3224911 Change-Id: I9dae8dfe23d195d76865f97011fe2f1d351e2940
2011-01-10 11:17:36 -08:00
#include "InputWindow.h"
#include "InputApplication.h"
Refactor input reader to add stylus support. Bug: 5064702 Introduced the concept of an InputListener to further decouple the InputReader from the InputDispatcher. The InputListener exposes just the minimum interface that the InputReader needs to communicate with the outside world. The InputReader passes arguments to the InputListener by reference, which makes it easy to queue them up. Consolidated all of the InputReader locks into one simple global Mutex. The reason this wasn't done before was due to potential re-entrance in outbound calls to the InputDispatcher. To fix this, the InputReader now queues up all of the events it wants to send using a QueuedInputListener, then flushes them outside of the critical section after all of the event processing is finished. Removing all of the InputMapper locks greatly simplifies the implementation. Added tests for new stylus features such as buttons, tool types, and hovering. Added some helpers to BitSet32 to handle common code patterns like finding the first marked bit and clearing it. Fixed a bug in VelocityTracker where the wrong pointer trace could get cleared when handling ACTION_POINTER_DOWN. Oops. Changed PointerCoords so it no longer stores useless zero axis values. Removed editAxisValue because it is not very useful when all zero value axes are absent and therefore cannot be edited in place. Added dispatch of stylus hover events. Added support for distance and tool types. Change-Id: I4cf14d134fcb1db7d10be5f2af7b37deef8f8468
2011-07-27 16:04:54 -07:00
#include "InputListener.h"
Prevent events from getting backlogged. This change implements two heuristics. 1. When events are older than 10 seconds, they are dropped. 2. If the application is currently busy processing an event and the user touches a window belonging to a different application then we drop the currently queued events so the other application can start processing the gesture immediately. Note that the system takes care of synthesizing cancelation events automatically for any events that it drops. Added some new handle types to allow the native dispatcher to indirectly refer to the WindowManager's window state and app window token. This was done to enable the dispatcher to identify the application to which each window belongs but it also eliminates some lookup tables and linear searches through the window list on each key press. Bug: 3224911 Change-Id: I9dae8dfe23d195d76865f97011fe2f1d351e2940
2011-01-10 11:17:36 -08:00
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
namespace android {
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-17 20:52:56 -07:00
/*
* Constants used to report the outcome of input event injection.
*/
enum {
/* (INTERNAL USE ONLY) Specifies that injection is pending and its outcome is unknown. */
INPUT_EVENT_INJECTION_PENDING = -1,
/* Injection succeeded. */
INPUT_EVENT_INJECTION_SUCCEEDED = 0,
/* Injection failed because the injector did not have permission to inject
* into the application with input focus. */
INPUT_EVENT_INJECTION_PERMISSION_DENIED = 1,
/* Injection failed because there were no available input targets. */
INPUT_EVENT_INJECTION_FAILED = 2,
/* Injection failed due to a timeout. */
INPUT_EVENT_INJECTION_TIMED_OUT = 3
};
DO NOT MERGE: Fix input event injection ANRs on UI thread. Added a new asynchronous injection mode and made the existing synchronization mechanism more robust. Change-Id: Ia4aa04fd9b75ea2461a844c5b7933c831c1027e6
2010-07-28 15:48:59 -07:00
/*
* Constants used to determine the input event injection synchronization mode.
*/
enum {
/* Injection is asynchronous and is assumed always to be successful. */
INPUT_EVENT_INJECTION_SYNC_NONE = 0,
/* Waits for previous events to be dispatched so that the input dispatcher can determine
* whether input event injection willbe permitted based on the current input focus.
* Does not wait for the input event to finish processing. */
INPUT_EVENT_INJECTION_SYNC_WAIT_FOR_RESULT = 1,
/* Waits for the input event to be completely processed. */
INPUT_EVENT_INJECTION_SYNC_WAIT_FOR_FINISHED = 2,
};
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-17 20:52:56 -07:00
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 01:31:58 -07:00
/*
* An input target specifies how an input event is to be dispatched to a particular window
* including the window's input channel, control flags, a timeout, and an X / Y offset to
* be added to input event coordinates to compensate for the absolute position of the
* window area.
*/
struct InputTarget {
enum {
Make input dispatcher only ANR for foreground windows. Redesigned the input dispatcher's ANR timeout mechanism so it is much closer to Froyo's policy. ANR is only ever signalled if the dispatcher is waiting on a window to finish processing its previous event(s) and there is new pending input. In the old code, we tracked the dispatch timeout separately for each input channel. This was somewhat complicated and also resulted in the situation where applications could ANR long after the user had pushed them into the background. Change-Id: I666ecada0952d4b95f1d67b9f733842b745c7f4b
2010-09-15 15:18:56 -07:00
/* This flag indicates that the event is being delivered to a foreground application. */
Add MotionEvent.HOVER_ENTER and HOVER_EXIT. The input dispatcher sends a HOVER_ENTER to a window before dispatching it any HOVER_MOVE events. For compatibility reasons, the window will *also* receive the HOVER_MOVE. When the pointer moves into a different window or the pointer goes down or when events are canceled for some reason, the input dispatcher sends a HOVER_EXIT to the previously hovered window. The view hierarchy behavior is similar. All views under the pointer receive onHoverEvent with HOVER_ENTER followed by any number of HOVER_MOVE events. When the pointer leaves a view, the view receives HOVER_EXIT. Similarly, if a parent view decides to capture hover by returning true from onHoverEvent, the hovered descendants will receive HOVER_EXIT. The default behavior of onHoverEvent is to update the view's hovered state by calling setHovered(true/false). Views can query their current hovered state using isHovered(). For testing purposes, the hovered state is mapped to the pressed drawable state. This will change in a subsequent commit with the introduction of a new hovered drawable state. Change-Id: Ib76a7a90236c8f2c7336e55773acade6346cacbe
2011-03-07 16:56:21 -08:00
FLAG_FOREGROUND = 1 << 0,
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 01:31:58 -07:00
Add support for secure views. Added the MotionEvent.FLAG_WINDOW_IS_OBSCURED flag which is set by the input manager whenever another visible window is partly or wholly obscured the target of a touch event so that applications can filter touches accordingly. Added a "filterTouchesWhenObscured" attribute to View which can be used to enable filtering of touches when the view's window is obscured. Change-Id: I936d9c85013fd2d77fb296a600528d30a29027d2
2010-09-01 17:01:00 -07:00
/* This flag indicates that the target of a MotionEvent is partly or wholly
* obscured by another visible window above it. The motion event should be
* delivered with flag AMOTION_EVENT_FLAG_WINDOW_IS_OBSCURED. */
Add MotionEvent.HOVER_ENTER and HOVER_EXIT. The input dispatcher sends a HOVER_ENTER to a window before dispatching it any HOVER_MOVE events. For compatibility reasons, the window will *also* receive the HOVER_MOVE. When the pointer moves into a different window or the pointer goes down or when events are canceled for some reason, the input dispatcher sends a HOVER_EXIT to the previously hovered window. The view hierarchy behavior is similar. All views under the pointer receive onHoverEvent with HOVER_ENTER followed by any number of HOVER_MOVE events. When the pointer leaves a view, the view receives HOVER_EXIT. Similarly, if a parent view decides to capture hover by returning true from onHoverEvent, the hovered descendants will receive HOVER_EXIT. The default behavior of onHoverEvent is to update the view's hovered state by calling setHovered(true/false). Views can query their current hovered state using isHovered(). For testing purposes, the hovered state is mapped to the pressed drawable state. This will change in a subsequent commit with the introduction of a new hovered drawable state. Change-Id: Ib76a7a90236c8f2c7336e55773acade6346cacbe
2011-03-07 16:56:21 -08:00
FLAG_WINDOW_IS_OBSCURED = 1 << 1,
Add suuport for splitting touch events across windows. This feature is currently used to enable dragging the start and end selection handles of a TextView at the same time. Could be used for other things later. Deleted some dead code in ArrowKeyMovementMethod and CursorControllers. Change-Id: I930accd97ca1ca1917aab8a807db2c950fc7b409
2010-09-26 22:20:12 -07:00
/* This flag indicates that a motion event is being split across multiple windows. */
Add MotionEvent.HOVER_ENTER and HOVER_EXIT. The input dispatcher sends a HOVER_ENTER to a window before dispatching it any HOVER_MOVE events. For compatibility reasons, the window will *also* receive the HOVER_MOVE. When the pointer moves into a different window or the pointer goes down or when events are canceled for some reason, the input dispatcher sends a HOVER_EXIT to the previously hovered window. The view hierarchy behavior is similar. All views under the pointer receive onHoverEvent with HOVER_ENTER followed by any number of HOVER_MOVE events. When the pointer leaves a view, the view receives HOVER_EXIT. Similarly, if a parent view decides to capture hover by returning true from onHoverEvent, the hovered descendants will receive HOVER_EXIT. The default behavior of onHoverEvent is to update the view's hovered state by calling setHovered(true/false). Views can query their current hovered state using isHovered(). For testing purposes, the hovered state is mapped to the pressed drawable state. This will change in a subsequent commit with the introduction of a new hovered drawable state. Change-Id: Ib76a7a90236c8f2c7336e55773acade6346cacbe
2011-03-07 16:56:21 -08:00
FLAG_SPLIT = 1 << 2,
No position information for outside touches When a window registers to listen for outside touches, it doesn't need the position information for touches that land outside of its activity for normal use cases. This patch uses the foreground window's UID as a filter to determine whether to pass the position information. This will allow applications to continue to rely on touch information for inputs that were directed at one of its other windows. Bug: 4541250 Change-Id: If16eb1ec8404b797d991859eef55ac0a20a355a3
2011-06-02 15:16:05 -07:00
/* This flag indicates that the pointer coordinates dispatched to the application
* will be zeroed out to avoid revealing information to an application. This is
* used in conjunction with FLAG_DISPATCH_AS_OUTSIDE to prevent apps not sharing
* the same UID from watching all touches. */
FLAG_ZERO_COORDS = 1 << 3,
Add MotionEvent.HOVER_ENTER and HOVER_EXIT. The input dispatcher sends a HOVER_ENTER to a window before dispatching it any HOVER_MOVE events. For compatibility reasons, the window will *also* receive the HOVER_MOVE. When the pointer moves into a different window or the pointer goes down or when events are canceled for some reason, the input dispatcher sends a HOVER_EXIT to the previously hovered window. The view hierarchy behavior is similar. All views under the pointer receive onHoverEvent with HOVER_ENTER followed by any number of HOVER_MOVE events. When the pointer leaves a view, the view receives HOVER_EXIT. Similarly, if a parent view decides to capture hover by returning true from onHoverEvent, the hovered descendants will receive HOVER_EXIT. The default behavior of onHoverEvent is to update the view's hovered state by calling setHovered(true/false). Views can query their current hovered state using isHovered(). For testing purposes, the hovered state is mapped to the pressed drawable state. This will change in a subsequent commit with the introduction of a new hovered drawable state. Change-Id: Ib76a7a90236c8f2c7336e55773acade6346cacbe
2011-03-07 16:56:21 -08:00
/* This flag indicates that the event should be sent as is.
* Should always be set unless the event is to be transmuted. */
FLAG_DISPATCH_AS_IS = 1 << 8,
/* This flag indicates that a MotionEvent with AMOTION_EVENT_ACTION_DOWN falls outside
* of the area of this target and so should instead be delivered as an
* AMOTION_EVENT_ACTION_OUTSIDE to this target. */
FLAG_DISPATCH_AS_OUTSIDE = 1 << 9,
/* This flag indicates that a hover sequence is starting in the given window.
* The event is transmuted into ACTION_HOVER_ENTER. */
FLAG_DISPATCH_AS_HOVER_ENTER = 1 << 10,
/* This flag indicates that a hover event happened outside of a window which handled
* previous hover events, signifying the end of the current hover sequence for that
* window.
* The event is transmuted into ACTION_HOVER_ENTER. */
FLAG_DISPATCH_AS_HOVER_EXIT = 1 << 11,
Allow touches to slide out of the navigation bar. Change-Id: I73cabba3d62f47829bf6217700ace56a27c42b1d
2011-06-08 15:37:10 -07:00
/* This flag indicates that the event should be canceled.
* It is used to transmute ACTION_MOVE into ACTION_CANCEL when a touch slips
* outside of a window. */
FLAG_DISPATCH_AS_SLIPPERY_EXIT = 1 << 12,
/* This flag indicates that the event should be dispatched as an initial down.
* It is used to transmute ACTION_MOVE into ACTION_DOWN when a touch slips
* into a new window. */
FLAG_DISPATCH_AS_SLIPPERY_ENTER = 1 << 13,
Add MotionEvent.HOVER_ENTER and HOVER_EXIT. The input dispatcher sends a HOVER_ENTER to a window before dispatching it any HOVER_MOVE events. For compatibility reasons, the window will *also* receive the HOVER_MOVE. When the pointer moves into a different window or the pointer goes down or when events are canceled for some reason, the input dispatcher sends a HOVER_EXIT to the previously hovered window. The view hierarchy behavior is similar. All views under the pointer receive onHoverEvent with HOVER_ENTER followed by any number of HOVER_MOVE events. When the pointer leaves a view, the view receives HOVER_EXIT. Similarly, if a parent view decides to capture hover by returning true from onHoverEvent, the hovered descendants will receive HOVER_EXIT. The default behavior of onHoverEvent is to update the view's hovered state by calling setHovered(true/false). Views can query their current hovered state using isHovered(). For testing purposes, the hovered state is mapped to the pressed drawable state. This will change in a subsequent commit with the introduction of a new hovered drawable state. Change-Id: Ib76a7a90236c8f2c7336e55773acade6346cacbe
2011-03-07 16:56:21 -08:00
/* Mask for all dispatch modes. */
FLAG_DISPATCH_MASK = FLAG_DISPATCH_AS_IS
| FLAG_DISPATCH_AS_OUTSIDE
| FLAG_DISPATCH_AS_HOVER_ENTER
Allow touches to slide out of the navigation bar. Change-Id: I73cabba3d62f47829bf6217700ace56a27c42b1d
2011-06-08 15:37:10 -07:00
| FLAG_DISPATCH_AS_HOVER_EXIT
| FLAG_DISPATCH_AS_SLIPPERY_EXIT
| FLAG_DISPATCH_AS_SLIPPERY_ENTER,
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 01:31:58 -07:00
};
// The input channel to be targeted.
sp<InputChannel> inputChannel;
// Flags for the input target.
int32_t flags;
// The x and y offset to add to a MotionEvent as it is delivered.
// (ignored for KeyEvents)
float xOffset, yOffset;
Add suuport for splitting touch events across windows. This feature is currently used to enable dragging the start and end selection handles of a TextView at the same time. Could be used for other things later. Deleted some dead code in ArrowKeyMovementMethod and CursorControllers. Change-Id: I930accd97ca1ca1917aab8a807db2c950fc7b409
2010-09-26 22:20:12 -07:00
Better compat mode part one: start scaling windows. First step of improving app screen size compatibility mode. When running in compat mode, an application's windows are scaled up on the screen rather than being small with 1:1 pixels. Currently we scale the application to fill the entire screen, so don't use an even pixel scaling. Though this may have some negative impact on the appearance (it looks okay to me), it has a big benefit of allowing us to now treat these apps as normal full-screens apps and do the normal transition animations as you move in and out and around in them. This introduces fun stuff in the input system to take care of modifying pointer coordinates to account for the app window surface scaling. The input dispatcher is told about the scale that is being applied to each window and, when there is one, adjusts pointer events appropriately as they are being sent to the transport. Also modified is CompatibilityInfo, which has been greatly simplified to not be so insane and incomprehendible. It is now simple -- when constructed it determines if the given app is compatible with the current screen size and density, and that is that. There are new APIs on ActivityManagerService to put applications that we would traditionally consider compatible with larger screens in compatibility mode. This is the start of a facility to have a UI affordance for a user to switch apps in and out of compatibility. To test switching of modes, there is a new variation of the "am" command to do this: am screen-compat [on|off] [package] This mode switching has the fundamentals of restarting activities when it is changed, though the state still needs to be persisted and the overall mode switch cleaned up. For the few small apps I have tested, things mostly seem to be working well. I know of one problem with the text selection handles being drawn at the wrong position because at some point the window offset is being scaled incorrectly. There are probably other similar issues around the interaction between two windows because the different window coordinate spaces are done in a hacky way instead of being formally integrated into the window manager layout process. Change-Id: Ie038e3746b448135117bd860859d74e360938557
2011-04-27 18:52:56 -04:00
// Scaling factor to apply to MotionEvent as it is delivered.
// (ignored for KeyEvents)
float scaleFactor;
Add suuport for splitting touch events across windows. This feature is currently used to enable dragging the start and end selection handles of a TextView at the same time. Could be used for other things later. Deleted some dead code in ArrowKeyMovementMethod and CursorControllers. Change-Id: I930accd97ca1ca1917aab8a807db2c950fc7b409
2010-09-26 22:20:12 -07:00
// The subset of pointer ids to include in motion events dispatched to this input target
// if FLAG_SPLIT is set.
BitSet32 pointerIds;
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 01:31:58 -07:00
};
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-17 20:52:56 -07:00
Use ViewConfiguration to seed input system configuration. Fix bug where the pointer presentation would be updated on any input reader timeout rather than only when a pointer gesture is in progress. Bug: 4124987 Change-Id: Ie9bba4a0b3228d55e45e65fa2ede5cd6ba887a08
2011-05-26 19:17:02 -07:00
/*
* Input dispatcher configuration.
*
* Specifies various options that modify the behavior of the input dispatcher.
*/
struct InputDispatcherConfiguration {
// The key repeat initial timeout.
nsecs_t keyRepeatTimeout;
// The key repeat inter-key delay.
nsecs_t keyRepeatDelay;
// The maximum suggested event delivery rate per second.
// This value is used to throttle motion event movement actions on a per-device
// basis. It is not intended to be a hard limit.
int32_t maxEventsPerSecond;
InputDispatcherConfiguration() :
keyRepeatTimeout(500 * 1000000LL),
keyRepeatDelay(50 * 1000000LL),
maxEventsPerSecond(60) { }
};
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 01:31:58 -07:00
/*
* Input dispatcher policy interface.
*
* The input reader policy is used by the input reader to interact with the Window Manager
* and other system components.
*
* The actual implementation is partially supported by callbacks into the DVM
* via JNI. This interface is also mocked in the unit tests.
*/
class InputDispatcherPolicyInterface : public virtual RefBase {
protected:
InputDispatcherPolicyInterface() { }
virtual ~InputDispatcherPolicyInterface() { }
public:
/* Notifies the system that a configuration change has occurred. */
virtual void notifyConfigurationChanged(nsecs_t when) = 0;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
/* Notifies the system that an application is not responding.
* Returns a new timeout to continue waiting, or 0 to abort dispatch. */
Make input dispatcher only ANR for foreground windows. Redesigned the input dispatcher's ANR timeout mechanism so it is much closer to Froyo's policy. ANR is only ever signalled if the dispatcher is waiting on a window to finish processing its previous event(s) and there is new pending input. In the old code, we tracked the dispatch timeout separately for each input channel. This was somewhat complicated and also resulted in the situation where applications could ANR long after the user had pushed them into the background. Change-Id: I666ecada0952d4b95f1d67b9f733842b745c7f4b
2010-09-15 15:18:56 -07:00
virtual nsecs_t notifyANR(const sp<InputApplicationHandle>& inputApplicationHandle,
Prevent events from getting backlogged. This change implements two heuristics. 1. When events are older than 10 seconds, they are dropped. 2. If the application is currently busy processing an event and the user touches a window belonging to a different application then we drop the currently queued events so the other application can start processing the gesture immediately. Note that the system takes care of synthesizing cancelation events automatically for any events that it drops. Added some new handle types to allow the native dispatcher to indirectly refer to the WindowManager's window state and app window token. This was done to enable the dispatcher to identify the application to which each window belongs but it also eliminates some lookup tables and linear searches through the window list on each key press. Bug: 3224911 Change-Id: I9dae8dfe23d195d76865f97011fe2f1d351e2940
2011-01-10 11:17:36 -08:00
const sp<InputWindowHandle>& inputWindowHandle) = 0;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 01:31:58 -07:00
/* Notifies the system that an input channel is unrecoverably broken. */
Prevent events from getting backlogged. This change implements two heuristics. 1. When events are older than 10 seconds, they are dropped. 2. If the application is currently busy processing an event and the user touches a window belonging to a different application then we drop the currently queued events so the other application can start processing the gesture immediately. Note that the system takes care of synthesizing cancelation events automatically for any events that it drops. Added some new handle types to allow the native dispatcher to indirectly refer to the WindowManager's window state and app window token. This was done to enable the dispatcher to identify the application to which each window belongs but it also eliminates some lookup tables and linear searches through the window list on each key press. Bug: 3224911 Change-Id: I9dae8dfe23d195d76865f97011fe2f1d351e2940
2011-01-10 11:17:36 -08:00
virtual void notifyInputChannelBroken(const sp<InputWindowHandle>& inputWindowHandle) = 0;
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 01:31:58 -07:00
Use ViewConfiguration to seed input system configuration. Fix bug where the pointer presentation would be updated on any input reader timeout rather than only when a pointer gesture is in progress. Bug: 4124987 Change-Id: Ie9bba4a0b3228d55e45e65fa2ede5cd6ba887a08
2011-05-26 19:17:02 -07:00
/* Gets the input dispatcher configuration. */
virtual void getDispatcherConfiguration(InputDispatcherConfiguration* outConfig) = 0;
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 01:31:58 -07:00
Use ViewConfiguration to seed input system configuration. Fix bug where the pointer presentation would be updated on any input reader timeout rather than only when a pointer gesture is in progress. Bug: 4124987 Change-Id: Ie9bba4a0b3228d55e45e65fa2ede5cd6ba887a08
2011-05-26 19:17:02 -07:00
/* Returns true if automatic key repeating is enabled. */
virtual bool isKeyRepeatEnabled() = 0;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
Add input filter mechanism for accessibility. This patch adds a mechanism for capturing, filtering, transforming and injecting input events at a very low level before the input dispatcher attempts to deliver them to applications. At this time, the mechanism is only intended to be used by the accessibility system to implement built-in system-level accessibility affordances. The accessibility input filter is currently just a stub. It logs the input events receives and reinjects them unchanged, except that it transforms KEYCODE_Q into KEYCODE_Z. Currently, the accessibility input filter is installed whenever accessibility is enabled. We'll probably want to change that so it only enables the input filter when a screen reader is installed and we want touch exploration. Change-Id: I35764fdf75522b69d09ebd78c9766eb7593c1afe
2011-03-30 02:25:18 -07:00
/* Filters an input event.
* Return true to dispatch the event unmodified, false to consume the event.
* A filter can also transform and inject events later by passing POLICY_FLAG_FILTERED
* to injectInputEvent.
*/
virtual bool filterInputEvent(const InputEvent* inputEvent, uint32_t policyFlags) = 0;
Added more robust tracking and cancelation of events. This change fixes several issues where events would be dropped in the input dispatch pipeline in such a way that the dispatcher could not accurately track the state of the input device. Given more robust tracking, we can now also provide robust cancelation of input events in cases where an application might otherwise become out of sync with the event stream due to ANR, app switch, policy decisions, or forced focus transitions. Pruned some of the input dispatcher log output. Moved the responsibility for calling intercept*BeforeQueueing into the input dispatcher instead of the input reader and added support for early interception of injected events for events coming from trusted sources. This enables behaviors like injection of media keys while the screen is off, haptic feedback of injected virtual keys, so injected events become more "first class" in a way. Change-Id: Iec6ff1dd21e5f3c7feb80ea4feb5382bd090dbd9
2010-10-08 22:31:17 -07:00
/* Intercepts a key event immediately before queueing it.
* The policy can use this method as an opportunity to perform power management functions
* and early event preprocessing such as updating policy flags.
*
* This method is expected to set the POLICY_FLAG_PASS_TO_USER policy flag if the event
* should be dispatched to applications.
*/
Ensure the ShortcutManager uses the correct key character map. The ShortcutManager used to only receive the key code of the key event that triggered the shortcut. This change now provides the shortcut manager with the whole key event so it can look up the associated character using the correct key character map. To make this more efficient, added a mechanism for recycling key events. At the moment it is only used by key events owned by the system process, since clients of the existing API (such as Views) might continue to hold on to key events after dispatch has finished so they would break if the key event were recycled by the framework. Deprecated KeyCharacterMap.BUILT_IN_KEYBOARD. Change-Id: I4313725dd63f2be01c350c005a41c7fde9bc67e8
2010-11-18 20:53:46 -08:00
virtual void interceptKeyBeforeQueueing(const KeyEvent* keyEvent, uint32_t& policyFlags) = 0;
Added more robust tracking and cancelation of events. This change fixes several issues where events would be dropped in the input dispatch pipeline in such a way that the dispatcher could not accurately track the state of the input device. Given more robust tracking, we can now also provide robust cancelation of input events in cases where an application might otherwise become out of sync with the event stream due to ANR, app switch, policy decisions, or forced focus transitions. Pruned some of the input dispatcher log output. Moved the responsibility for calling intercept*BeforeQueueing into the input dispatcher instead of the input reader and added support for early interception of injected events for events coming from trusted sources. This enables behaviors like injection of media keys while the screen is off, haptic feedback of injected virtual keys, so injected events become more "first class" in a way. Change-Id: Iec6ff1dd21e5f3c7feb80ea4feb5382bd090dbd9
2010-10-08 22:31:17 -07:00
Wake screen from external HID peripherals. Added some plumbing to enable the policy to intercept motion events when the screen is off to handle wakeup if needed. Added a basic concept of an external device to limit the scope of the wakeup policy to external devices only. The wakeup policy for internal devices should be based on explicit rules such as policy flags in key layout files. Moved isTouchEvent to native. Ensure the dispatcher sends the right event type to userActivity for non-touch pointer events like HOVER_MOVE and SCROLL. Bug: 3193114 Change-Id: I15dbd48a16810dfaf226ff7ad117d46908ca4f86
2011-03-02 19:23:13 -08:00
/* Intercepts a touch, trackball or other motion event before queueing it.
Added more robust tracking and cancelation of events. This change fixes several issues where events would be dropped in the input dispatch pipeline in such a way that the dispatcher could not accurately track the state of the input device. Given more robust tracking, we can now also provide robust cancelation of input events in cases where an application might otherwise become out of sync with the event stream due to ANR, app switch, policy decisions, or forced focus transitions. Pruned some of the input dispatcher log output. Moved the responsibility for calling intercept*BeforeQueueing into the input dispatcher instead of the input reader and added support for early interception of injected events for events coming from trusted sources. This enables behaviors like injection of media keys while the screen is off, haptic feedback of injected virtual keys, so injected events become more "first class" in a way. Change-Id: Iec6ff1dd21e5f3c7feb80ea4feb5382bd090dbd9
2010-10-08 22:31:17 -07:00
* The policy can use this method as an opportunity to perform power management functions
* and early event preprocessing such as updating policy flags.
*
* This method is expected to set the POLICY_FLAG_PASS_TO_USER policy flag if the event
* should be dispatched to applications.
*/
Wake screen from external HID peripherals. Added some plumbing to enable the policy to intercept motion events when the screen is off to handle wakeup if needed. Added a basic concept of an external device to limit the scope of the wakeup policy to external devices only. The wakeup policy for internal devices should be based on explicit rules such as policy flags in key layout files. Moved isTouchEvent to native. Ensure the dispatcher sends the right event type to userActivity for non-touch pointer events like HOVER_MOVE and SCROLL. Bug: 3193114 Change-Id: I15dbd48a16810dfaf226ff7ad117d46908ca4f86
2011-03-02 19:23:13 -08:00
virtual void interceptMotionBeforeQueueing(nsecs_t when, uint32_t& policyFlags) = 0;
Added more robust tracking and cancelation of events. This change fixes several issues where events would be dropped in the input dispatch pipeline in such a way that the dispatcher could not accurately track the state of the input device. Given more robust tracking, we can now also provide robust cancelation of input events in cases where an application might otherwise become out of sync with the event stream due to ANR, app switch, policy decisions, or forced focus transitions. Pruned some of the input dispatcher log output. Moved the responsibility for calling intercept*BeforeQueueing into the input dispatcher instead of the input reader and added support for early interception of injected events for events coming from trusted sources. This enables behaviors like injection of media keys while the screen is off, haptic feedback of injected virtual keys, so injected events become more "first class" in a way. Change-Id: Iec6ff1dd21e5f3c7feb80ea4feb5382bd090dbd9
2010-10-08 22:31:17 -07:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
/* Allows the policy a chance to intercept a key before dispatching. */
Improve screenshot chord debouncing. Bug: 5011907 Introduce a 150ms delay in handling volume down keys while waiting to see if a power key will follow. Don't trigger the screenshot chord if both volume up and volume down are pressed together. Don't trigger the long-press power menu if volume keys are also pressed. Require the user to press both keys in the chord within the debounce time and continue long-pressing them in order to trigger the screenshot action. Change-Id: I248968d37b73c09d6d08e7f62667c443eba32da0
2011-10-12 13:57:59 -07:00
virtual nsecs_t interceptKeyBeforeDispatching(const sp<InputWindowHandle>& inputWindowHandle,
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
const KeyEvent* keyEvent, uint32_t policyFlags) = 0;
Add support for fallback keycodes. This change enables the framework to synthesize key events to implement default behavior when an application does not handle a key. For example, this change enables numeric keypad keys to perform their associated special function when numlock is off. The application is informed that it is processing a fallback keypress so it can choose to ignore it. Added a new keycode for switching applications. Added ALT key deadkeys. New default key mappings: - ESC -> BACK - Meta+ESC -> HOME - Alt+ESC -> MENU - Meta+Space -> SEARCH - Meta+Tab -> APP_SWITCH Fixed some comments. Fixed some tests. Change-Id: Id7f3b6645f3a350275e624547822f72652f3defe
2010-12-06 17:13:33 -08:00
/* Allows the policy a chance to perform default processing for an unhandled key.
* Returns an alternate keycode to redispatch as a fallback, or 0 to give up. */
Prevent events from getting backlogged. This change implements two heuristics. 1. When events are older than 10 seconds, they are dropped. 2. If the application is currently busy processing an event and the user touches a window belonging to a different application then we drop the currently queued events so the other application can start processing the gesture immediately. Note that the system takes care of synthesizing cancelation events automatically for any events that it drops. Added some new handle types to allow the native dispatcher to indirectly refer to the WindowManager's window state and app window token. This was done to enable the dispatcher to identify the application to which each window belongs but it also eliminates some lookup tables and linear searches through the window list on each key press. Bug: 3224911 Change-Id: I9dae8dfe23d195d76865f97011fe2f1d351e2940
2011-01-10 11:17:36 -08:00
virtual bool dispatchUnhandledKey(const sp<InputWindowHandle>& inputWindowHandle,
Add support for fallback keycodes. This change enables the framework to synthesize key events to implement default behavior when an application does not handle a key. For example, this change enables numeric keypad keys to perform their associated special function when numlock is off. The application is informed that it is processing a fallback keypress so it can choose to ignore it. Added a new keycode for switching applications. Added ALT key deadkeys. New default key mappings: - ESC -> BACK - Meta+ESC -> HOME - Alt+ESC -> MENU - Meta+Space -> SEARCH - Meta+Tab -> APP_SWITCH Fixed some comments. Fixed some tests. Change-Id: Id7f3b6645f3a350275e624547822f72652f3defe
2010-12-06 17:13:33 -08:00
const KeyEvent* keyEvent, uint32_t policyFlags, KeyEvent* outFallbackKeyEvent) = 0;
Tell system server whether the app handled input events. Refactored ViewRoot, NativeActivity and related classes to tell the dispatcher whether an input event was actually handled by the application. This will be used to move more of the global default key processing into the system server instead of the application. Change-Id: If06b98b6f45c543e5ac5b1eae2b3baf9371fba28
2010-11-05 15:02:16 -07:00
Added more robust tracking and cancelation of events. This change fixes several issues where events would be dropped in the input dispatch pipeline in such a way that the dispatcher could not accurately track the state of the input device. Given more robust tracking, we can now also provide robust cancelation of input events in cases where an application might otherwise become out of sync with the event stream due to ANR, app switch, policy decisions, or forced focus transitions. Pruned some of the input dispatcher log output. Moved the responsibility for calling intercept*BeforeQueueing into the input dispatcher instead of the input reader and added support for early interception of injected events for events coming from trusted sources. This enables behaviors like injection of media keys while the screen is off, haptic feedback of injected virtual keys, so injected events become more "first class" in a way. Change-Id: Iec6ff1dd21e5f3c7feb80ea4feb5382bd090dbd9
2010-10-08 22:31:17 -07:00
/* Notifies the policy about switch events.
*/
virtual void notifySwitch(nsecs_t when,
int32_t switchCode, int32_t switchValue, uint32_t policyFlags) = 0;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
/* Poke user activity for an event dispatched to a window. */
Add suuport for splitting touch events across windows. This feature is currently used to enable dragging the start and end selection handles of a TextView at the same time. Could be used for other things later. Deleted some dead code in ArrowKeyMovementMethod and CursorControllers. Change-Id: I930accd97ca1ca1917aab8a807db2c950fc7b409
2010-09-26 22:20:12 -07:00
virtual void pokeUserActivity(nsecs_t eventTime, int32_t eventType) = 0;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
/* Checks whether a given application pid/uid has permission to inject input events
* into other applications.
*
* This method is special in that its implementation promises to be non-reentrant and
* is safe to call while holding other locks. (Most other methods make no such guarantees!)
*/
virtual bool checkInjectEventsPermissionNonReentrant(
int32_t injectorPid, int32_t injectorUid) = 0;
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 01:31:58 -07:00
};
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
/* Notifies the system about input events generated by the input reader.
* The dispatcher is expected to be mostly asynchronous. */
Refactor input reader to add stylus support. Bug: 5064702 Introduced the concept of an InputListener to further decouple the InputReader from the InputDispatcher. The InputListener exposes just the minimum interface that the InputReader needs to communicate with the outside world. The InputReader passes arguments to the InputListener by reference, which makes it easy to queue them up. Consolidated all of the InputReader locks into one simple global Mutex. The reason this wasn't done before was due to potential re-entrance in outbound calls to the InputDispatcher. To fix this, the InputReader now queues up all of the events it wants to send using a QueuedInputListener, then flushes them outside of the critical section after all of the event processing is finished. Removing all of the InputMapper locks greatly simplifies the implementation. Added tests for new stylus features such as buttons, tool types, and hovering. Added some helpers to BitSet32 to handle common code patterns like finding the first marked bit and clearing it. Fixed a bug in VelocityTracker where the wrong pointer trace could get cleared when handling ACTION_POINTER_DOWN. Oops. Changed PointerCoords so it no longer stores useless zero axis values. Removed editAxisValue because it is not very useful when all zero value axes are absent and therefore cannot be edited in place. Added dispatch of stylus hover events. Added support for distance and tool types. Change-Id: I4cf14d134fcb1db7d10be5f2af7b37deef8f8468
2011-07-27 16:04:54 -07:00
class InputDispatcherInterface : public virtual RefBase, public InputListenerInterface {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
protected:
InputDispatcherInterface() { }
virtual ~InputDispatcherInterface() { }
public:
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
/* Dumps the state of the input dispatcher.
*
* This method may be called on any thread (usually by the input manager). */
virtual void dump(String8& dump) = 0;
Add input system to Watchdog. Bug: 5094994 Change-Id: I153866958efc64ac19bda8b997c1c9f6ad425ec4
2011-08-10 16:25:21 -07:00
/* Called by the heatbeat to ensures that the dispatcher has not deadlocked. */
virtual void monitor() = 0;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
/* Runs a single iteration of the dispatch loop.
* Nominally processes one queued event, a timeout, or a response from an input consumer.
*
* This method should only be called on the input dispatcher thread.
*/
virtual void dispatchOnce() = 0;
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-17 20:52:56 -07:00
/* Injects an input event and optionally waits for sync.
DO NOT MERGE: Fix input event injection ANRs on UI thread. Added a new asynchronous injection mode and made the existing synchronization mechanism more robust. Change-Id: Ia4aa04fd9b75ea2461a844c5b7933c831c1027e6
2010-07-28 15:48:59 -07:00
* The synchronization mode determines whether the method blocks while waiting for
* input injection to proceed.
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-17 20:52:56 -07:00
* Returns one of the INPUT_EVENT_INJECTION_XXX constants.
*
* This method may be called on any thread (usually by the input manager).
*/
virtual int32_t injectInputEvent(const InputEvent* event,
Add input filter mechanism for accessibility. This patch adds a mechanism for capturing, filtering, transforming and injecting input events at a very low level before the input dispatcher attempts to deliver them to applications. At this time, the mechanism is only intended to be used by the accessibility system to implement built-in system-level accessibility affordances. The accessibility input filter is currently just a stub. It logs the input events receives and reinjects them unchanged, except that it transforms KEYCODE_Q into KEYCODE_Z. Currently, the accessibility input filter is installed whenever accessibility is enabled. We'll probably want to change that so it only enables the input filter when a screen reader is installed and we want touch exploration. Change-Id: I35764fdf75522b69d09ebd78c9766eb7593c1afe
2011-03-30 02:25:18 -07:00
int32_t injectorPid, int32_t injectorUid, int32_t syncMode, int32_t timeoutMillis,
uint32_t policyFlags) = 0;
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-17 20:52:56 -07:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
/* Sets the list of input windows.
*
* This method may be called on any thread (usually by the input manager).
*/
Refactor input dispatcher use of window/app handles. This change moves the cached window and application input state into the handle objects themselves. It simplifies the dispatcher somewhat because it no longer needs to fix up references to transient InputWindow objects each time the window list is updated. This change will also make it easier to optimize setInputWindows to avoid doing a lot of redundant data copying. In principle, only the modified fields need to be updated. However, for now we continue to update all fields in unison as before. It turns out that the input dispatcher was inappropriately retaining pointers to InputWindow objects within the mWindows InputWindow vector. This vector is copy-on-write so it is possible and the item pointers to change if an editing operation is performed on the vector when it does not exclusively own the underlying SharedBuffer. This bug was uncovered by a previous change that replaced calls to clear() and appendVector() with a simple use of operator= which caused the buffer to be shared. Consequently after editItemAt was called (which it shouldn't have, actually) the buffer was copied and the cached InputWindow pointers became invalid. Oops. This change fixes the problem. Change-Id: I0a259339a6015fcf9113dc4081a6875e047fd425
2011-07-13 22:51:29 -07:00
virtual void setInputWindows(const Vector<sp<InputWindowHandle> >& inputWindowHandles) = 0;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
/* Sets the focused application.
*
* This method may be called on any thread (usually by the input manager).
*/
Refactor input dispatcher use of window/app handles. This change moves the cached window and application input state into the handle objects themselves. It simplifies the dispatcher somewhat because it no longer needs to fix up references to transient InputWindow objects each time the window list is updated. This change will also make it easier to optimize setInputWindows to avoid doing a lot of redundant data copying. In principle, only the modified fields need to be updated. However, for now we continue to update all fields in unison as before. It turns out that the input dispatcher was inappropriately retaining pointers to InputWindow objects within the mWindows InputWindow vector. This vector is copy-on-write so it is possible and the item pointers to change if an editing operation is performed on the vector when it does not exclusively own the underlying SharedBuffer. This bug was uncovered by a previous change that replaced calls to clear() and appendVector() with a simple use of operator= which caused the buffer to be shared. Consequently after editItemAt was called (which it shouldn't have, actually) the buffer was copied and the cached InputWindow pointers became invalid. Oops. This change fixes the problem. Change-Id: I0a259339a6015fcf9113dc4081a6875e047fd425
2011-07-13 22:51:29 -07:00
virtual void setFocusedApplication(
const sp<InputApplicationHandle>& inputApplicationHandle) = 0;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
/* Sets the input dispatching mode.
*
* This method may be called on any thread (usually by the input manager).
*/
virtual void setInputDispatchMode(bool enabled, bool frozen) = 0;
Add input filter mechanism for accessibility. This patch adds a mechanism for capturing, filtering, transforming and injecting input events at a very low level before the input dispatcher attempts to deliver them to applications. At this time, the mechanism is only intended to be used by the accessibility system to implement built-in system-level accessibility affordances. The accessibility input filter is currently just a stub. It logs the input events receives and reinjects them unchanged, except that it transforms KEYCODE_Q into KEYCODE_Z. Currently, the accessibility input filter is installed whenever accessibility is enabled. We'll probably want to change that so it only enables the input filter when a screen reader is installed and we want touch exploration. Change-Id: I35764fdf75522b69d09ebd78c9766eb7593c1afe
2011-03-30 02:25:18 -07:00
/* Sets whether input event filtering is enabled.
* When enabled, incoming input events are sent to the policy's filterInputEvent
* method instead of being dispatched. The filter is expected to use
* injectInputEvent to inject the events it would like to have dispatched.
* It should include POLICY_FLAG_FILTERED in the policy flags during injection.
*/
virtual void setInputFilterEnabled(bool enabled) = 0;
Add support for transferring touch focus. Prerequisite for drag and drop. Change-Id: Iedbe93ed0f3e1c4083130fe66b4ba06d416afce0
2010-09-27 14:52:15 -07:00
/* Transfers touch focus from the window associated with one channel to the
* window associated with the other channel.
*
* Returns true on success. False if the window did not actually have touch focus.
*/
virtual bool transferTouchFocus(const sp<InputChannel>& fromChannel,
const sp<InputChannel>& toChannel) = 0;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
/* Registers or unregister input channels that may be used as targets for input events.
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
* If monitor is true, the channel will receive a copy of all input events.
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
*
* These methods may be called on any thread (usually by the input manager).
*/
Prevent events from getting backlogged. This change implements two heuristics. 1. When events are older than 10 seconds, they are dropped. 2. If the application is currently busy processing an event and the user touches a window belonging to a different application then we drop the currently queued events so the other application can start processing the gesture immediately. Note that the system takes care of synthesizing cancelation events automatically for any events that it drops. Added some new handle types to allow the native dispatcher to indirectly refer to the WindowManager's window state and app window token. This was done to enable the dispatcher to identify the application to which each window belongs but it also eliminates some lookup tables and linear searches through the window list on each key press. Bug: 3224911 Change-Id: I9dae8dfe23d195d76865f97011fe2f1d351e2940
2011-01-10 11:17:36 -08:00
virtual status_t registerInputChannel(const sp<InputChannel>& inputChannel,
const sp<InputWindowHandle>& inputWindowHandle, bool monitor) = 0;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
virtual status_t unregisterInputChannel(const sp<InputChannel>& inputChannel) = 0;
};
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 01:31:58 -07:00
/* Dispatches events to input targets. Some functions of the input dispatcher, such as
* identifying input targets, are controlled by a separate policy object.
*
* IMPORTANT INVARIANT:
* Because the policy can potentially block or cause re-entrance into the input dispatcher,
* the input dispatcher never calls into the policy while holding its internal locks.
* The implementation is also carefully designed to recover from scenarios such as an
* input channel becoming unregistered while identifying input targets or processing timeouts.
*
* Methods marked 'Locked' must be called with the lock acquired.
*
* Methods marked 'LockedInterruptible' must be called with the lock acquired but
* may during the course of their execution release the lock, call into the policy, and
* then reacquire the lock. The caller is responsible for recovering gracefully.
*
* A 'LockedInterruptible' method may called a 'Locked' method, but NOT vice-versa.
*/
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
class InputDispatcher : public InputDispatcherInterface {
protected:
virtual ~InputDispatcher();
public:
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 01:31:58 -07:00
explicit InputDispatcher(const sp<InputDispatcherPolicyInterface>& policy);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
virtual void dump(String8& dump);
Add input system to Watchdog. Bug: 5094994 Change-Id: I153866958efc64ac19bda8b997c1c9f6ad425ec4
2011-08-10 16:25:21 -07:00
virtual void monitor();
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
virtual void dispatchOnce();
Refactor input reader to add stylus support. Bug: 5064702 Introduced the concept of an InputListener to further decouple the InputReader from the InputDispatcher. The InputListener exposes just the minimum interface that the InputReader needs to communicate with the outside world. The InputReader passes arguments to the InputListener by reference, which makes it easy to queue them up. Consolidated all of the InputReader locks into one simple global Mutex. The reason this wasn't done before was due to potential re-entrance in outbound calls to the InputDispatcher. To fix this, the InputReader now queues up all of the events it wants to send using a QueuedInputListener, then flushes them outside of the critical section after all of the event processing is finished. Removing all of the InputMapper locks greatly simplifies the implementation. Added tests for new stylus features such as buttons, tool types, and hovering. Added some helpers to BitSet32 to handle common code patterns like finding the first marked bit and clearing it. Fixed a bug in VelocityTracker where the wrong pointer trace could get cleared when handling ACTION_POINTER_DOWN. Oops. Changed PointerCoords so it no longer stores useless zero axis values. Removed editAxisValue because it is not very useful when all zero value axes are absent and therefore cannot be edited in place. Added dispatch of stylus hover events. Added support for distance and tool types. Change-Id: I4cf14d134fcb1db7d10be5f2af7b37deef8f8468
2011-07-27 16:04:54 -07:00
virtual void notifyConfigurationChanged(const NotifyConfigurationChangedArgs* args);
virtual void notifyKey(const NotifyKeyArgs* args);
virtual void notifyMotion(const NotifyMotionArgs* args);
virtual void notifySwitch(const NotifySwitchArgs* args);
Input system bug fixes, particularly for stylus. Bug: 5049148 Finished stylus support, including support for indirect stylus and mouse tools. Added TILT axis. When stylus tilt X/Y is available, it is transformed into an orientation and tilt inclination which is a more convenient representation and a simpler extension to the exiting API. Touch devices now only report touch data using a single input source. Previously touch devices in pointer mode would report both absolute touch pad data and cooked pointer gestures. Now we just pick one. The touch device switches modes as needed when the focused application enables/disables pointer gestures. This change greatly simplifies the code and reduces the load on the input dispatcher. Fixed an incorrect assumption that the value of ABS_(MT_)DISTANCE would be zero whenever the stylus was in direct contact. It appears that the correct way to determine whether the stylus is in direct contact (rather than hovering) is by checking for a non-zero reported pressure. Added code to read the initial state of tool buttons and axis values when the input devices are initialized or reset. This fixes problems where the input mapper state might have the wrong initial state. Moved responsibility for cancelling pending inputs (keys down, touches, etc.) to the InputDispatcher by sending it a device reset notification. This frees the InputReader from having to synthesize events during reset, which was cumbersome and somewhat brittle to begin with. Consolidated more of the common accumulator logic from SingleTouchInputMapper and MultiTouchInputMapper into TouchInputMapper. Improved the PointerLocation output. Change-Id: I595d3647f7fd7cb1e3eff8b3c76b85043b5fe2f0
2011-08-18 11:20:58 -07:00
virtual void notifyDeviceReset(const NotifyDeviceResetArgs* args);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-17 20:52:56 -07:00
virtual int32_t injectInputEvent(const InputEvent* event,
Add input filter mechanism for accessibility. This patch adds a mechanism for capturing, filtering, transforming and injecting input events at a very low level before the input dispatcher attempts to deliver them to applications. At this time, the mechanism is only intended to be used by the accessibility system to implement built-in system-level accessibility affordances. The accessibility input filter is currently just a stub. It logs the input events receives and reinjects them unchanged, except that it transforms KEYCODE_Q into KEYCODE_Z. Currently, the accessibility input filter is installed whenever accessibility is enabled. We'll probably want to change that so it only enables the input filter when a screen reader is installed and we want touch exploration. Change-Id: I35764fdf75522b69d09ebd78c9766eb7593c1afe
2011-03-30 02:25:18 -07:00
int32_t injectorPid, int32_t injectorUid, int32_t syncMode, int32_t timeoutMillis,
uint32_t policyFlags);
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-17 20:52:56 -07:00
Refactor input dispatcher use of window/app handles. This change moves the cached window and application input state into the handle objects themselves. It simplifies the dispatcher somewhat because it no longer needs to fix up references to transient InputWindow objects each time the window list is updated. This change will also make it easier to optimize setInputWindows to avoid doing a lot of redundant data copying. In principle, only the modified fields need to be updated. However, for now we continue to update all fields in unison as before. It turns out that the input dispatcher was inappropriately retaining pointers to InputWindow objects within the mWindows InputWindow vector. This vector is copy-on-write so it is possible and the item pointers to change if an editing operation is performed on the vector when it does not exclusively own the underlying SharedBuffer. This bug was uncovered by a previous change that replaced calls to clear() and appendVector() with a simple use of operator= which caused the buffer to be shared. Consequently after editItemAt was called (which it shouldn't have, actually) the buffer was copied and the cached InputWindow pointers became invalid. Oops. This change fixes the problem. Change-Id: I0a259339a6015fcf9113dc4081a6875e047fd425
2011-07-13 22:51:29 -07:00
virtual void setInputWindows(const Vector<sp<InputWindowHandle> >& inputWindowHandles);
virtual void setFocusedApplication(const sp<InputApplicationHandle>& inputApplicationHandle);
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
virtual void setInputDispatchMode(bool enabled, bool frozen);
Add input filter mechanism for accessibility. This patch adds a mechanism for capturing, filtering, transforming and injecting input events at a very low level before the input dispatcher attempts to deliver them to applications. At this time, the mechanism is only intended to be used by the accessibility system to implement built-in system-level accessibility affordances. The accessibility input filter is currently just a stub. It logs the input events receives and reinjects them unchanged, except that it transforms KEYCODE_Q into KEYCODE_Z. Currently, the accessibility input filter is installed whenever accessibility is enabled. We'll probably want to change that so it only enables the input filter when a screen reader is installed and we want touch exploration. Change-Id: I35764fdf75522b69d09ebd78c9766eb7593c1afe
2011-03-30 02:25:18 -07:00
virtual void setInputFilterEnabled(bool enabled);
Native input event dispatching. Target identification is now fully native. Fixed a couple of minor issues related to input injection. Native input enabled by default, can be disabled by setting WindowManagerPolicy.ENABLE_NATIVE_INPUT_DISPATCH to false. Change-Id: I7edf66ed3e987cc9306ad4743ac57a116af452ff
2010-06-22 01:27:15 -07:00
Add support for transferring touch focus. Prerequisite for drag and drop. Change-Id: Iedbe93ed0f3e1c4083130fe66b4ba06d416afce0
2010-09-27 14:52:15 -07:00
virtual bool transferTouchFocus(const sp<InputChannel>& fromChannel,
const sp<InputChannel>& toChannel);
Prevent events from getting backlogged. This change implements two heuristics. 1. When events are older than 10 seconds, they are dropped. 2. If the application is currently busy processing an event and the user touches a window belonging to a different application then we drop the currently queued events so the other application can start processing the gesture immediately. Note that the system takes care of synthesizing cancelation events automatically for any events that it drops. Added some new handle types to allow the native dispatcher to indirectly refer to the WindowManager's window state and app window token. This was done to enable the dispatcher to identify the application to which each window belongs but it also eliminates some lookup tables and linear searches through the window list on each key press. Bug: 3224911 Change-Id: I9dae8dfe23d195d76865f97011fe2f1d351e2940
2011-01-10 11:17:36 -08:00
virtual status_t registerInputChannel(const sp<InputChannel>& inputChannel,
const sp<InputWindowHandle>& inputWindowHandle, bool monitor);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
virtual status_t unregisterInputChannel(const sp<InputChannel>& inputChannel);
private:
template <typename T>
struct Link {
T* next;
T* prev;
};
Add suuport for splitting touch events across windows. This feature is currently used to enable dragging the start and end selection handles of a TextView at the same time. Could be used for other things later. Deleted some dead code in ArrowKeyMovementMethod and CursorControllers. Change-Id: I930accd97ca1ca1917aab8a807db2c950fc7b409
2010-09-26 22:20:12 -07:00
struct InjectionState {
mutable int32_t refCount;
int32_t injectorPid;
int32_t injectorUid;
int32_t injectionResult; // initially INPUT_EVENT_INJECTION_PENDING
bool injectionIsAsync; // set to true if injection is not waiting for the result
int32_t pendingForegroundDispatches; // the number of foreground dispatches in progress
Remove unimplemented memory pool. dlmalloc does such a great job that we don't need a pool anyways. Change-Id: I105b28c4a5c491543959190c7c0a9de75a5b8052
2011-07-20 15:19:50 -07:00
InjectionState(int32_t injectorPid, int32_t injectorUid);
void release();
private:
~InjectionState();
Add suuport for splitting touch events across windows. This feature is currently used to enable dragging the start and end selection handles of a TextView at the same time. Could be used for other things later. Deleted some dead code in ArrowKeyMovementMethod and CursorControllers. Change-Id: I930accd97ca1ca1917aab8a807db2c950fc7b409
2010-09-26 22:20:12 -07:00
};
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
struct EventEntry : Link<EventEntry> {
enum {
TYPE_CONFIGURATION_CHANGED,
Input system bug fixes, particularly for stylus. Bug: 5049148 Finished stylus support, including support for indirect stylus and mouse tools. Added TILT axis. When stylus tilt X/Y is available, it is transformed into an orientation and tilt inclination which is a more convenient representation and a simpler extension to the exiting API. Touch devices now only report touch data using a single input source. Previously touch devices in pointer mode would report both absolute touch pad data and cooked pointer gestures. Now we just pick one. The touch device switches modes as needed when the focused application enables/disables pointer gestures. This change greatly simplifies the code and reduces the load on the input dispatcher. Fixed an incorrect assumption that the value of ABS_(MT_)DISTANCE would be zero whenever the stylus was in direct contact. It appears that the correct way to determine whether the stylus is in direct contact (rather than hovering) is by checking for a non-zero reported pressure. Added code to read the initial state of tool buttons and axis values when the input devices are initialized or reset. This fixes problems where the input mapper state might have the wrong initial state. Moved responsibility for cancelling pending inputs (keys down, touches, etc.) to the InputDispatcher by sending it a device reset notification. This frees the InputReader from having to synthesize events during reset, which was cumbersome and somewhat brittle to begin with. Consolidated more of the common accumulator logic from SingleTouchInputMapper and MultiTouchInputMapper into TouchInputMapper. Improved the PointerLocation output. Change-Id: I595d3647f7fd7cb1e3eff8b3c76b85043b5fe2f0
2011-08-18 11:20:58 -07:00
TYPE_DEVICE_RESET,
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
TYPE_KEY,
TYPE_MOTION
};
Add suuport for splitting touch events across windows. This feature is currently used to enable dragging the start and end selection handles of a TextView at the same time. Could be used for other things later. Deleted some dead code in ArrowKeyMovementMethod and CursorControllers. Change-Id: I930accd97ca1ca1917aab8a807db2c950fc7b409
2010-09-26 22:20:12 -07:00
mutable int32_t refCount;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
int32_t type;
nsecs_t eventTime;
Added more robust tracking and cancelation of events. This change fixes several issues where events would be dropped in the input dispatch pipeline in such a way that the dispatcher could not accurately track the state of the input device. Given more robust tracking, we can now also provide robust cancelation of input events in cases where an application might otherwise become out of sync with the event stream due to ANR, app switch, policy decisions, or forced focus transitions. Pruned some of the input dispatcher log output. Moved the responsibility for calling intercept*BeforeQueueing into the input dispatcher instead of the input reader and added support for early interception of injected events for events coming from trusted sources. This enables behaviors like injection of media keys while the screen is off, haptic feedback of injected virtual keys, so injected events become more "first class" in a way. Change-Id: Iec6ff1dd21e5f3c7feb80ea4feb5382bd090dbd9
2010-10-08 22:31:17 -07:00
uint32_t policyFlags;
Add suuport for splitting touch events across windows. This feature is currently used to enable dragging the start and end selection handles of a TextView at the same time. Could be used for other things later. Deleted some dead code in ArrowKeyMovementMethod and CursorControllers. Change-Id: I930accd97ca1ca1917aab8a807db2c950fc7b409
2010-09-26 22:20:12 -07:00
InjectionState* injectionState;
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-17 20:52:56 -07:00
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 01:31:58 -07:00
bool dispatchInProgress; // initially false, set to true while dispatching
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
Coalesce input events that arrive faster than 333Hz. Some drivers report individual finger updates one at a time instead of all at once. When 10 fingers are down, this can cause the framework to have to handle 10 times as many events each with 10 times as much data. Applications like PointerLocation would get significantly bogged down by all of the redundant samples. This change coalesces samples that are closely spaced in time, before they are dispatched, as part of the motion event batching protocol. Increased the size of the InputChannel shared memory buffer so that applications can catch up faster if they accumulate a backlog of samples. Added logging code to help measure input dispatch and drawing latency issues in the view hierarchy. See ViewDebug.DEBUG_LATENCY. Change-Id: Ia5898f781f19901d2225c529a910c32bdf4f504f
2011-04-07 11:38:09 -07:00
inline bool isInjected() const { return injectionState != NULL; }
Remove unimplemented memory pool. dlmalloc does such a great job that we don't need a pool anyways. Change-Id: I105b28c4a5c491543959190c7c0a9de75a5b8052
2011-07-20 15:19:50 -07:00
void release();
protected:
EventEntry(int32_t type, nsecs_t eventTime, uint32_t policyFlags);
virtual ~EventEntry();
void releaseInjectionState();
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
};
struct ConfigurationChangedEntry : EventEntry {
Remove unimplemented memory pool. dlmalloc does such a great job that we don't need a pool anyways. Change-Id: I105b28c4a5c491543959190c7c0a9de75a5b8052
2011-07-20 15:19:50 -07:00
ConfigurationChangedEntry(nsecs_t eventTime);
protected:
virtual ~ConfigurationChangedEntry();
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
};
Input system bug fixes, particularly for stylus. Bug: 5049148 Finished stylus support, including support for indirect stylus and mouse tools. Added TILT axis. When stylus tilt X/Y is available, it is transformed into an orientation and tilt inclination which is a more convenient representation and a simpler extension to the exiting API. Touch devices now only report touch data using a single input source. Previously touch devices in pointer mode would report both absolute touch pad data and cooked pointer gestures. Now we just pick one. The touch device switches modes as needed when the focused application enables/disables pointer gestures. This change greatly simplifies the code and reduces the load on the input dispatcher. Fixed an incorrect assumption that the value of ABS_(MT_)DISTANCE would be zero whenever the stylus was in direct contact. It appears that the correct way to determine whether the stylus is in direct contact (rather than hovering) is by checking for a non-zero reported pressure. Added code to read the initial state of tool buttons and axis values when the input devices are initialized or reset. This fixes problems where the input mapper state might have the wrong initial state. Moved responsibility for cancelling pending inputs (keys down, touches, etc.) to the InputDispatcher by sending it a device reset notification. This frees the InputReader from having to synthesize events during reset, which was cumbersome and somewhat brittle to begin with. Consolidated more of the common accumulator logic from SingleTouchInputMapper and MultiTouchInputMapper into TouchInputMapper. Improved the PointerLocation output. Change-Id: I595d3647f7fd7cb1e3eff8b3c76b85043b5fe2f0
2011-08-18 11:20:58 -07:00
struct DeviceResetEntry : EventEntry {
int32_t deviceId;
DeviceResetEntry(nsecs_t eventTime, int32_t deviceId);
protected:
virtual ~DeviceResetEntry();
};
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
struct KeyEntry : EventEntry {
int32_t deviceId;
Fix crashes caused by some input devices. The touch screen sometimes reports more than 10 pointers even though that's all we asked for. When this happens, we start dropping events with more than 10 pointers. This confuses applications and causes them to crash. Raised the limit to 16 pointers. Bug: 3331247 The default behavior was to identify all touch devices as touch screens. External devices that are plugged in are more likely to be touch pads not attached to a screen. Changed the default to be a touch pad and renamed some internal constants to avoid confusion. A certain mouse happens to also behave like a touch pad. That caused problems because we would see multiple concurrent traces of motion events coming from the same input device so we would batch them up. Added code to ensure that we don't batch events unless they come from the same *source* in addition to coming from the same *device*. Due to batching or misbehaving drivers, it's possible for the set of pointer ids to be different from what we expect when it comes time to split motion events across windows. As a result, we can generate motion events with 0 pointers. When we try to deliver those events, we cause an error in the InputTransport so we tear down the InputChannel and kill the application. Added code to check out assumption about pointer ids and drop the event gracefully instead. Patched up the tests to take into account the change in default behavior for identifying touch screens and touch pads. Change-Id: Ic364bd4cb4cc6335d4a1213a26d6bdadc7e33505
2011-01-25 16:02:22 -08:00
uint32_t source;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
int32_t action;
int32_t flags;
int32_t keyCode;
int32_t scanCode;
int32_t metaState;
int32_t repeatCount;
nsecs_t downTime;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
bool syntheticRepeat; // set to true for synthetic key repeats
enum InterceptKeyResult {
INTERCEPT_KEY_RESULT_UNKNOWN,
INTERCEPT_KEY_RESULT_SKIP,
INTERCEPT_KEY_RESULT_CONTINUE,
Improve screenshot chord debouncing. Bug: 5011907 Introduce a 150ms delay in handling volume down keys while waiting to see if a power key will follow. Don't trigger the screenshot chord if both volume up and volume down are pressed together. Don't trigger the long-press power menu if volume keys are also pressed. Require the user to press both keys in the chord within the debounce time and continue long-pressing them in order to trigger the screenshot action. Change-Id: I248968d37b73c09d6d08e7f62667c443eba32da0
2011-10-12 13:57:59 -07:00
INTERCEPT_KEY_RESULT_TRY_AGAIN_LATER,
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
};
InterceptKeyResult interceptKeyResult; // set based on the interception result
Improve screenshot chord debouncing. Bug: 5011907 Introduce a 150ms delay in handling volume down keys while waiting to see if a power key will follow. Don't trigger the screenshot chord if both volume up and volume down are pressed together. Don't trigger the long-press power menu if volume keys are also pressed. Require the user to press both keys in the chord within the debounce time and continue long-pressing them in order to trigger the screenshot action. Change-Id: I248968d37b73c09d6d08e7f62667c443eba32da0
2011-10-12 13:57:59 -07:00
nsecs_t interceptKeyWakeupTime; // used with INTERCEPT_KEY_RESULT_TRY_AGAIN_LATER
Remove unimplemented memory pool. dlmalloc does such a great job that we don't need a pool anyways. Change-Id: I105b28c4a5c491543959190c7c0a9de75a5b8052
2011-07-20 15:19:50 -07:00
KeyEntry(nsecs_t eventTime,
int32_t deviceId, uint32_t source, uint32_t policyFlags, int32_t action,
int32_t flags, int32_t keyCode, int32_t scanCode, int32_t metaState,
int32_t repeatCount, nsecs_t downTime);
void recycle();
protected:
virtual ~KeyEntry();
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
};
struct MotionSample {
MotionSample* next;
Coalesce input events that arrive faster than 333Hz. Some drivers report individual finger updates one at a time instead of all at once. When 10 fingers are down, this can cause the framework to have to handle 10 times as many events each with 10 times as much data. Applications like PointerLocation would get significantly bogged down by all of the redundant samples. This change coalesces samples that are closely spaced in time, before they are dispatched, as part of the motion event batching protocol. Increased the size of the InputChannel shared memory buffer so that applications can catch up faster if they accumulate a backlog of samples. Added logging code to help measure input dispatch and drawing latency issues in the view hierarchy. See ViewDebug.DEBUG_LATENCY. Change-Id: Ia5898f781f19901d2225c529a910c32bdf4f504f
2011-04-07 11:38:09 -07:00
nsecs_t eventTime; // may be updated during coalescing
nsecs_t eventTimeBeforeCoalescing; // not updated during coalescing
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
PointerCoords pointerCoords[MAX_POINTERS];
Remove unimplemented memory pool. dlmalloc does such a great job that we don't need a pool anyways. Change-Id: I105b28c4a5c491543959190c7c0a9de75a5b8052
2011-07-20 15:19:50 -07:00
MotionSample(nsecs_t eventTime, const PointerCoords* pointerCoords,
uint32_t pointerCount);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
};
struct MotionEntry : EventEntry {
int32_t deviceId;
Fix crashes caused by some input devices. The touch screen sometimes reports more than 10 pointers even though that's all we asked for. When this happens, we start dropping events with more than 10 pointers. This confuses applications and causes them to crash. Raised the limit to 16 pointers. Bug: 3331247 The default behavior was to identify all touch devices as touch screens. External devices that are plugged in are more likely to be touch pads not attached to a screen. Changed the default to be a touch pad and renamed some internal constants to avoid confusion. A certain mouse happens to also behave like a touch pad. That caused problems because we would see multiple concurrent traces of motion events coming from the same input device so we would batch them up. Added code to ensure that we don't batch events unless they come from the same *source* in addition to coming from the same *device*. Due to batching or misbehaving drivers, it's possible for the set of pointer ids to be different from what we expect when it comes time to split motion events across windows. As a result, we can generate motion events with 0 pointers. When we try to deliver those events, we cause an error in the InputTransport so we tear down the InputChannel and kill the application. Added code to check out assumption about pointer ids and drop the event gracefully instead. Patched up the tests to take into account the change in default behavior for identifying touch screens and touch pads. Change-Id: Ic364bd4cb4cc6335d4a1213a26d6bdadc7e33505
2011-01-25 16:02:22 -08:00
uint32_t source;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
int32_t action;
Add support for secure views. Added the MotionEvent.FLAG_WINDOW_IS_OBSCURED flag which is set by the input manager whenever another visible window is partly or wholly obscured the target of a touch event so that applications can filter touches accordingly. Added a "filterTouchesWhenObscured" attribute to View which can be used to enable filtering of touches when the view's window is obscured. Change-Id: I936d9c85013fd2d77fb296a600528d30a29027d2
2010-09-01 17:01:00 -07:00
int32_t flags;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
int32_t metaState;
Add initial API for stylus and mouse buttons. Added the concept of pointer properties in a MotionEvent. This is currently used to track the pointer tool type to enable applications to distinguish finger touches from a stylus. Button states are also reported to application as part of touch events. There are no new actions for detecting changes in button states. The application should instead query the button state from the MotionEvent and take appropriate action as needed. A good time to check the button state is on ACTION_DOWN. As a side-effect, applications that do not support multiple buttons will treat primary, secondary and tertiary buttons identically for all touch events. The back button on the mouse is mapped to KEYCODE_BACK and the forward button is mapped to KEYCODE_FORWARD. Added basic plumbing for the secondary mouse button to invoke the context menu, particularly in lists. Added clamp and split methods on MotionEvent to take care of common filtering operations so we don't have them scattered in multiple places across the framework. Bug: 4260011 Change-Id: Ie992b4d4e00c8f2e76b961da0a902145b27f6d83
2011-05-06 18:20:01 -07:00
int32_t buttonState;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
int32_t edgeFlags;
float xPrecision;
float yPrecision;
nsecs_t downTime;
uint32_t pointerCount;
Add initial API for stylus and mouse buttons. Added the concept of pointer properties in a MotionEvent. This is currently used to track the pointer tool type to enable applications to distinguish finger touches from a stylus. Button states are also reported to application as part of touch events. There are no new actions for detecting changes in button states. The application should instead query the button state from the MotionEvent and take appropriate action as needed. A good time to check the button state is on ACTION_DOWN. As a side-effect, applications that do not support multiple buttons will treat primary, secondary and tertiary buttons identically for all touch events. The back button on the mouse is mapped to KEYCODE_BACK and the forward button is mapped to KEYCODE_FORWARD. Added basic plumbing for the secondary mouse button to invoke the context menu, particularly in lists. Added clamp and split methods on MotionEvent to take care of common filtering operations so we don't have them scattered in multiple places across the framework. Bug: 4260011 Change-Id: Ie992b4d4e00c8f2e76b961da0a902145b27f6d83
2011-05-06 18:20:01 -07:00
PointerProperties pointerProperties[MAX_POINTERS];
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
// Linked list of motion samples associated with this motion event.
MotionSample firstSample;
MotionSample* lastSample;
Add support for throttling motion events. Change-Id: I24b3a17753e91ecda60a60fe5cd2e6b3260e033d
2010-08-18 15:51:08 -07:00
Remove unimplemented memory pool. dlmalloc does such a great job that we don't need a pool anyways. Change-Id: I105b28c4a5c491543959190c7c0a9de75a5b8052
2011-07-20 15:19:50 -07:00
MotionEntry(nsecs_t eventTime,
int32_t deviceId, uint32_t source, uint32_t policyFlags, int32_t action,
int32_t flags, int32_t metaState, int32_t buttonState, int32_t edgeFlags,
float xPrecision, float yPrecision,
nsecs_t downTime, uint32_t pointerCount,
const PointerProperties* pointerProperties, const PointerCoords* pointerCoords);
Add support for throttling motion events. Change-Id: I24b3a17753e91ecda60a60fe5cd2e6b3260e033d
2010-08-18 15:51:08 -07:00
uint32_t countSamples() const;
Coalesce input events that arrive faster than 333Hz. Some drivers report individual finger updates one at a time instead of all at once. When 10 fingers are down, this can cause the framework to have to handle 10 times as many events each with 10 times as much data. Applications like PointerLocation would get significantly bogged down by all of the redundant samples. This change coalesces samples that are closely spaced in time, before they are dispatched, as part of the motion event batching protocol. Increased the size of the InputChannel shared memory buffer so that applications can catch up faster if they accumulate a backlog of samples. Added logging code to help measure input dispatch and drawing latency issues in the view hierarchy. See ViewDebug.DEBUG_LATENCY. Change-Id: Ia5898f781f19901d2225c529a910c32bdf4f504f
2011-04-07 11:38:09 -07:00
// Checks whether we can append samples, assuming the device id and source are the same.
bool canAppendSamples(int32_t action, uint32_t pointerCount,
Add initial API for stylus and mouse buttons. Added the concept of pointer properties in a MotionEvent. This is currently used to track the pointer tool type to enable applications to distinguish finger touches from a stylus. Button states are also reported to application as part of touch events. There are no new actions for detecting changes in button states. The application should instead query the button state from the MotionEvent and take appropriate action as needed. A good time to check the button state is on ACTION_DOWN. As a side-effect, applications that do not support multiple buttons will treat primary, secondary and tertiary buttons identically for all touch events. The back button on the mouse is mapped to KEYCODE_BACK and the forward button is mapped to KEYCODE_FORWARD. Added basic plumbing for the secondary mouse button to invoke the context menu, particularly in lists. Added clamp and split methods on MotionEvent to take care of common filtering operations so we don't have them scattered in multiple places across the framework. Bug: 4260011 Change-Id: Ie992b4d4e00c8f2e76b961da0a902145b27f6d83
2011-05-06 18:20:01 -07:00
const PointerProperties* pointerProperties) const;
Remove unimplemented memory pool. dlmalloc does such a great job that we don't need a pool anyways. Change-Id: I105b28c4a5c491543959190c7c0a9de75a5b8052
2011-07-20 15:19:50 -07:00
void appendSample(nsecs_t eventTime, const PointerCoords* pointerCoords);
protected:
virtual ~MotionEntry();
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
};
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 01:31:58 -07:00
// Tracks the progress of dispatching a particular event to a particular connection.
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
struct DispatchEntry : Link<DispatchEntry> {
EventEntry* eventEntry; // the event to dispatch
int32_t targetFlags;
float xOffset;
float yOffset;
Better compat mode part one: start scaling windows. First step of improving app screen size compatibility mode. When running in compat mode, an application's windows are scaled up on the screen rather than being small with 1:1 pixels. Currently we scale the application to fill the entire screen, so don't use an even pixel scaling. Though this may have some negative impact on the appearance (it looks okay to me), it has a big benefit of allowing us to now treat these apps as normal full-screens apps and do the normal transition animations as you move in and out and around in them. This introduces fun stuff in the input system to take care of modifying pointer coordinates to account for the app window surface scaling. The input dispatcher is told about the scale that is being applied to each window and, when there is one, adjusts pointer events appropriately as they are being sent to the transport. Also modified is CompatibilityInfo, which has been greatly simplified to not be so insane and incomprehendible. It is now simple -- when constructed it determines if the given app is compatible with the current screen size and density, and that is that. There are new APIs on ActivityManagerService to put applications that we would traditionally consider compatible with larger screens in compatibility mode. This is the start of a facility to have a UI affordance for a user to switch apps in and out of compatibility. To test switching of modes, there is a new variation of the "am" command to do this: am screen-compat [on|off] [package] This mode switching has the fundamentals of restarting activities when it is changed, though the state still needs to be persisted and the overall mode switch cleaned up. For the few small apps I have tested, things mostly seem to be working well. I know of one problem with the text selection handles being drawn at the wrong position because at some point the window offset is being scaled incorrectly. There are probably other similar issues around the interaction between two windows because the different window coordinate spaces are done in a hacky way instead of being formally integrated into the window manager layout process. Change-Id: Ie038e3746b448135117bd860859d74e360938557
2011-04-27 18:52:56 -04:00
float scaleFactor;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
// True if dispatch has started.
bool inProgress;
Improve input event consistency invariants. Fixed some issues where inconsistent streams of events could be generated by the dispatcher, particularly when switching from hovering with one device to hovering with another. Fixed a bug where the touch pad would fail to generate a new HOVER_MOVE following a tap event. As a result, the hover event stream would not resume until the user touched the touch pad again. Change-Id: I444dce84641fb12e56a0af84c931520771d6c493
2011-06-28 20:08:48 -07:00
// Set to the resolved action and flags when the event is enqueued.
int32_t resolvedAction;
int32_t resolvedFlags;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
// For motion events:
// Pointer to the first motion sample to dispatch in this cycle.
// Usually NULL to indicate that the list of motion samples begins at
// MotionEntry::firstSample. Otherwise, some samples were dispatched in a previous
// cycle and this pointer indicates the location of the first remainining sample
// to dispatch during the current cycle.
MotionSample* headMotionSample;
// Pointer to a motion sample to dispatch in the next cycle if the dispatcher was
// unable to send all motion samples during this cycle. On the next cycle,
// headMotionSample will be initialized to tailMotionSample and tailMotionSample
// will be set to NULL.
MotionSample* tailMotionSample;
DO NOT MERGE: Fix input event injection ANRs on UI thread. Added a new asynchronous injection mode and made the existing synchronization mechanism more robust. Change-Id: Ia4aa04fd9b75ea2461a844c5b7933c831c1027e6
2010-07-28 15:48:59 -07:00
Remove unimplemented memory pool. dlmalloc does such a great job that we don't need a pool anyways. Change-Id: I105b28c4a5c491543959190c7c0a9de75a5b8052
2011-07-20 15:19:50 -07:00
DispatchEntry(EventEntry* eventEntry,
int32_t targetFlags, float xOffset, float yOffset, float scaleFactor);
~DispatchEntry();
Make input dispatcher only ANR for foreground windows. Redesigned the input dispatcher's ANR timeout mechanism so it is much closer to Froyo's policy. ANR is only ever signalled if the dispatcher is waiting on a window to finish processing its previous event(s) and there is new pending input. In the old code, we tracked the dispatch timeout separately for each input channel. This was somewhat complicated and also resulted in the situation where applications could ANR long after the user had pushed them into the background. Change-Id: I666ecada0952d4b95f1d67b9f733842b745c7f4b
2010-09-15 15:18:56 -07:00
inline bool hasForegroundTarget() const {
return targetFlags & InputTarget::FLAG_FOREGROUND;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
}
Add suuport for splitting touch events across windows. This feature is currently used to enable dragging the start and end selection handles of a TextView at the same time. Could be used for other things later. Deleted some dead code in ArrowKeyMovementMethod and CursorControllers. Change-Id: I930accd97ca1ca1917aab8a807db2c950fc7b409
2010-09-26 22:20:12 -07:00
inline bool isSplit() const {
return targetFlags & InputTarget::FLAG_SPLIT;
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
};
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 01:31:58 -07:00
// A command entry captures state and behavior for an action to be performed in the
// dispatch loop after the initial processing has taken place. It is essentially
// a kind of continuation used to postpone sensitive policy interactions to a point
// in the dispatch loop where it is safe to release the lock (generally after finishing
// the critical parts of the dispatch cycle).
//
// The special thing about commands is that they can voluntarily release and reacquire
// the dispatcher lock at will. Initially when the command starts running, the
// dispatcher lock is held. However, if the command needs to call into the policy to
// do some work, it can release the lock, do the work, then reacquire the lock again
// before returning.
//
// This mechanism is a bit clunky but it helps to preserve the invariant that the dispatch
// never calls into the policy while holding its lock.
//
// Commands are implicitly 'LockedInterruptible'.
struct CommandEntry;
typedef void (InputDispatcher::*Command)(CommandEntry* commandEntry);
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-17 20:52:56 -07:00
class Connection;
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 01:31:58 -07:00
struct CommandEntry : Link<CommandEntry> {
Remove unimplemented memory pool. dlmalloc does such a great job that we don't need a pool anyways. Change-Id: I105b28c4a5c491543959190c7c0a9de75a5b8052
2011-07-20 15:19:50 -07:00
CommandEntry(Command command);
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 01:31:58 -07:00
~CommandEntry();
Command command;
// parameters for the command (usage varies by command)
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-17 20:52:56 -07:00
sp<Connection> connection;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
nsecs_t eventTime;
KeyEntry* keyEntry;
sp<InputApplicationHandle> inputApplicationHandle;
Prevent events from getting backlogged. This change implements two heuristics. 1. When events are older than 10 seconds, they are dropped. 2. If the application is currently busy processing an event and the user touches a window belonging to a different application then we drop the currently queued events so the other application can start processing the gesture immediately. Note that the system takes care of synthesizing cancelation events automatically for any events that it drops. Added some new handle types to allow the native dispatcher to indirectly refer to the WindowManager's window state and app window token. This was done to enable the dispatcher to identify the application to which each window belongs but it also eliminates some lookup tables and linear searches through the window list on each key press. Bug: 3224911 Change-Id: I9dae8dfe23d195d76865f97011fe2f1d351e2940
2011-01-10 11:17:36 -08:00
sp<InputWindowHandle> inputWindowHandle;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
int32_t userActivityEventType;
Tell system server whether the app handled input events. Refactored ViewRoot, NativeActivity and related classes to tell the dispatcher whether an input event was actually handled by the application. This will be used to move more of the global default key processing into the system server instead of the application. Change-Id: If06b98b6f45c543e5ac5b1eae2b3baf9371fba28
2010-11-05 15:02:16 -07:00
bool handled;
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 01:31:58 -07:00
};
// Generic queue implementation.
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
template <typename T>
struct Queue {
Remove unimplemented memory pool. dlmalloc does such a great job that we don't need a pool anyways. Change-Id: I105b28c4a5c491543959190c7c0a9de75a5b8052
2011-07-20 15:19:50 -07:00
T* head;
T* tail;
inline Queue() : head(NULL), tail(NULL) {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
inline bool isEmpty() const {
Remove unimplemented memory pool. dlmalloc does such a great job that we don't need a pool anyways. Change-Id: I105b28c4a5c491543959190c7c0a9de75a5b8052
2011-07-20 15:19:50 -07:00
return !head;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
}
inline void enqueueAtTail(T* entry) {
Remove unimplemented memory pool. dlmalloc does such a great job that we don't need a pool anyways. Change-Id: I105b28c4a5c491543959190c7c0a9de75a5b8052
2011-07-20 15:19:50 -07:00
entry->prev = tail;
if (tail) {
tail->next = entry;
} else {
head = entry;
}
entry->next = NULL;
tail = entry;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
}
inline void enqueueAtHead(T* entry) {
Remove unimplemented memory pool. dlmalloc does such a great job that we don't need a pool anyways. Change-Id: I105b28c4a5c491543959190c7c0a9de75a5b8052
2011-07-20 15:19:50 -07:00
entry->next = head;
if (head) {
head->prev = entry;
} else {
tail = entry;
}
entry->prev = NULL;
head = entry;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
}
inline void dequeue(T* entry) {
Remove unimplemented memory pool. dlmalloc does such a great job that we don't need a pool anyways. Change-Id: I105b28c4a5c491543959190c7c0a9de75a5b8052
2011-07-20 15:19:50 -07:00
if (entry->prev) {
entry->prev->next = entry->next;
} else {
head = entry->next;
}
if (entry->next) {
entry->next->prev = entry->prev;
} else {
tail = entry->prev;
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
}
inline T* dequeueAtHead() {
Remove unimplemented memory pool. dlmalloc does such a great job that we don't need a pool anyways. Change-Id: I105b28c4a5c491543959190c7c0a9de75a5b8052
2011-07-20 15:19:50 -07:00
T* entry = head;
head = entry->next;
if (head) {
head->prev = NULL;
} else {
tail = NULL;
}
return entry;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
}
Make input dispatcher only ANR for foreground windows. Redesigned the input dispatcher's ANR timeout mechanism so it is much closer to Froyo's policy. ANR is only ever signalled if the dispatcher is waiting on a window to finish processing its previous event(s) and there is new pending input. In the old code, we tracked the dispatch timeout separately for each input channel. This was somewhat complicated and also resulted in the situation where applications could ANR long after the user had pushed them into the background. Change-Id: I666ecada0952d4b95f1d67b9f733842b745c7f4b
2010-09-15 15:18:56 -07:00
uint32_t count() const;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
};
Support chorded fallback keys. Also be more careful about canceling fallback keys during focus transitions, when the application handles the key, or when the policy decides to do something different. Fixed a crash due to JNI CallObjectMethod returning an undefined value (not null) when an exception is thrown. Fixed a crash due to the policy trying to create a Dialog for recent apps on the dispatcher thread. It should happen on the policy's Looper instead. Bug: 4187302 Change-Id: I659a3fd1bd2325ed36d965f9beb75dacb89790c9
2011-03-29 15:11:34 -07:00
/* Specifies which events are to be canceled and why. */
struct CancelationOptions {
enum Mode {
Added more robust tracking and cancelation of events. This change fixes several issues where events would be dropped in the input dispatch pipeline in such a way that the dispatcher could not accurately track the state of the input device. Given more robust tracking, we can now also provide robust cancelation of input events in cases where an application might otherwise become out of sync with the event stream due to ANR, app switch, policy decisions, or forced focus transitions. Pruned some of the input dispatcher log output. Moved the responsibility for calling intercept*BeforeQueueing into the input dispatcher instead of the input reader and added support for early interception of injected events for events coming from trusted sources. This enables behaviors like injection of media keys while the screen is off, haptic feedback of injected virtual keys, so injected events become more "first class" in a way. Change-Id: Iec6ff1dd21e5f3c7feb80ea4feb5382bd090dbd9
2010-10-08 22:31:17 -07:00
CANCEL_ALL_EVENTS = 0,
CANCEL_POINTER_EVENTS = 1,
CANCEL_NON_POINTER_EVENTS = 2,
Add support for fallback keycodes. This change enables the framework to synthesize key events to implement default behavior when an application does not handle a key. For example, this change enables numeric keypad keys to perform their associated special function when numlock is off. The application is informed that it is processing a fallback keypress so it can choose to ignore it. Added a new keycode for switching applications. Added ALT key deadkeys. New default key mappings: - ESC -> BACK - Meta+ESC -> HOME - Alt+ESC -> MENU - Meta+Space -> SEARCH - Meta+Tab -> APP_SWITCH Fixed some comments. Fixed some tests. Change-Id: Id7f3b6645f3a350275e624547822f72652f3defe
2010-12-06 17:13:33 -08:00
CANCEL_FALLBACK_EVENTS = 3,
Added more robust tracking and cancelation of events. This change fixes several issues where events would be dropped in the input dispatch pipeline in such a way that the dispatcher could not accurately track the state of the input device. Given more robust tracking, we can now also provide robust cancelation of input events in cases where an application might otherwise become out of sync with the event stream due to ANR, app switch, policy decisions, or forced focus transitions. Pruned some of the input dispatcher log output. Moved the responsibility for calling intercept*BeforeQueueing into the input dispatcher instead of the input reader and added support for early interception of injected events for events coming from trusted sources. This enables behaviors like injection of media keys while the screen is off, haptic feedback of injected virtual keys, so injected events become more "first class" in a way. Change-Id: Iec6ff1dd21e5f3c7feb80ea4feb5382bd090dbd9
2010-10-08 22:31:17 -07:00
};
Support chorded fallback keys. Also be more careful about canceling fallback keys during focus transitions, when the application handles the key, or when the policy decides to do something different. Fixed a crash due to JNI CallObjectMethod returning an undefined value (not null) when an exception is thrown. Fixed a crash due to the policy trying to create a Dialog for recent apps on the dispatcher thread. It should happen on the policy's Looper instead. Bug: 4187302 Change-Id: I659a3fd1bd2325ed36d965f9beb75dacb89790c9
2011-03-29 15:11:34 -07:00
// The criterion to use to determine which events should be canceled.
Mode mode;
// Descriptive reason for the cancelation.
const char* reason;
// The specific keycode of the key event to cancel, or -1 to cancel any key event.
int32_t keyCode;
Input system bug fixes, particularly for stylus. Bug: 5049148 Finished stylus support, including support for indirect stylus and mouse tools. Added TILT axis. When stylus tilt X/Y is available, it is transformed into an orientation and tilt inclination which is a more convenient representation and a simpler extension to the exiting API. Touch devices now only report touch data using a single input source. Previously touch devices in pointer mode would report both absolute touch pad data and cooked pointer gestures. Now we just pick one. The touch device switches modes as needed when the focused application enables/disables pointer gestures. This change greatly simplifies the code and reduces the load on the input dispatcher. Fixed an incorrect assumption that the value of ABS_(MT_)DISTANCE would be zero whenever the stylus was in direct contact. It appears that the correct way to determine whether the stylus is in direct contact (rather than hovering) is by checking for a non-zero reported pressure. Added code to read the initial state of tool buttons and axis values when the input devices are initialized or reset. This fixes problems where the input mapper state might have the wrong initial state. Moved responsibility for cancelling pending inputs (keys down, touches, etc.) to the InputDispatcher by sending it a device reset notification. This frees the InputReader from having to synthesize events during reset, which was cumbersome and somewhat brittle to begin with. Consolidated more of the common accumulator logic from SingleTouchInputMapper and MultiTouchInputMapper into TouchInputMapper. Improved the PointerLocation output. Change-Id: I595d3647f7fd7cb1e3eff8b3c76b85043b5fe2f0
2011-08-18 11:20:58 -07:00
// The specific device id of events to cancel, or -1 to cancel events from any device.
int32_t deviceId;
Support chorded fallback keys. Also be more careful about canceling fallback keys during focus transitions, when the application handles the key, or when the policy decides to do something different. Fixed a crash due to JNI CallObjectMethod returning an undefined value (not null) when an exception is thrown. Fixed a crash due to the policy trying to create a Dialog for recent apps on the dispatcher thread. It should happen on the policy's Looper instead. Bug: 4187302 Change-Id: I659a3fd1bd2325ed36d965f9beb75dacb89790c9
2011-03-29 15:11:34 -07:00
CancelationOptions(Mode mode, const char* reason) :
Input system bug fixes, particularly for stylus. Bug: 5049148 Finished stylus support, including support for indirect stylus and mouse tools. Added TILT axis. When stylus tilt X/Y is available, it is transformed into an orientation and tilt inclination which is a more convenient representation and a simpler extension to the exiting API. Touch devices now only report touch data using a single input source. Previously touch devices in pointer mode would report both absolute touch pad data and cooked pointer gestures. Now we just pick one. The touch device switches modes as needed when the focused application enables/disables pointer gestures. This change greatly simplifies the code and reduces the load on the input dispatcher. Fixed an incorrect assumption that the value of ABS_(MT_)DISTANCE would be zero whenever the stylus was in direct contact. It appears that the correct way to determine whether the stylus is in direct contact (rather than hovering) is by checking for a non-zero reported pressure. Added code to read the initial state of tool buttons and axis values when the input devices are initialized or reset. This fixes problems where the input mapper state might have the wrong initial state. Moved responsibility for cancelling pending inputs (keys down, touches, etc.) to the InputDispatcher by sending it a device reset notification. This frees the InputReader from having to synthesize events during reset, which was cumbersome and somewhat brittle to begin with. Consolidated more of the common accumulator logic from SingleTouchInputMapper and MultiTouchInputMapper into TouchInputMapper. Improved the PointerLocation output. Change-Id: I595d3647f7fd7cb1e3eff8b3c76b85043b5fe2f0
2011-08-18 11:20:58 -07:00
mode(mode), reason(reason), keyCode(-1), deviceId(-1) { }
Support chorded fallback keys. Also be more careful about canceling fallback keys during focus transitions, when the application handles the key, or when the policy decides to do something different. Fixed a crash due to JNI CallObjectMethod returning an undefined value (not null) when an exception is thrown. Fixed a crash due to the policy trying to create a Dialog for recent apps on the dispatcher thread. It should happen on the policy's Looper instead. Bug: 4187302 Change-Id: I659a3fd1bd2325ed36d965f9beb75dacb89790c9
2011-03-29 15:11:34 -07:00
};
/* Tracks dispatched key and motion event state so that cancelation events can be
* synthesized when events are dropped. */
class InputState {
public:
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
InputState();
~InputState();
// Returns true if there is no state to be canceled.
bool isNeutral() const;
Improve input event consistency invariants. Fixed some issues where inconsistent streams of events could be generated by the dispatcher, particularly when switching from hovering with one device to hovering with another. Fixed a bug where the touch pad would fail to generate a new HOVER_MOVE following a tap event. As a result, the hover event stream would not resume until the user touched the touch pad again. Change-Id: I444dce84641fb12e56a0af84c931520771d6c493
2011-06-28 20:08:48 -07:00
// Returns true if the specified source is known to have received a hover enter
// motion event.
bool isHovering(int32_t deviceId, uint32_t source) const;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
// Records tracking information for a key event that has just been published.
Improve input event consistency invariants. Fixed some issues where inconsistent streams of events could be generated by the dispatcher, particularly when switching from hovering with one device to hovering with another. Fixed a bug where the touch pad would fail to generate a new HOVER_MOVE following a tap event. As a result, the hover event stream would not resume until the user touched the touch pad again. Change-Id: I444dce84641fb12e56a0af84c931520771d6c493
2011-06-28 20:08:48 -07:00
// Returns true if the event should be delivered, false if it is inconsistent
// and should be skipped.
bool trackKey(const KeyEntry* entry, int32_t action, int32_t flags);
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
// Records tracking information for a motion event that has just been published.
Improve input event consistency invariants. Fixed some issues where inconsistent streams of events could be generated by the dispatcher, particularly when switching from hovering with one device to hovering with another. Fixed a bug where the touch pad would fail to generate a new HOVER_MOVE following a tap event. As a result, the hover event stream would not resume until the user touched the touch pad again. Change-Id: I444dce84641fb12e56a0af84c931520771d6c493
2011-06-28 20:08:48 -07:00
// Returns true if the event should be delivered, false if it is inconsistent
// and should be skipped.
bool trackMotion(const MotionEntry* entry, int32_t action, int32_t flags);
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
Added more robust tracking and cancelation of events. This change fixes several issues where events would be dropped in the input dispatch pipeline in such a way that the dispatcher could not accurately track the state of the input device. Given more robust tracking, we can now also provide robust cancelation of input events in cases where an application might otherwise become out of sync with the event stream due to ANR, app switch, policy decisions, or forced focus transitions. Pruned some of the input dispatcher log output. Moved the responsibility for calling intercept*BeforeQueueing into the input dispatcher instead of the input reader and added support for early interception of injected events for events coming from trusted sources. This enables behaviors like injection of media keys while the screen is off, haptic feedback of injected virtual keys, so injected events become more "first class" in a way. Change-Id: Iec6ff1dd21e5f3c7feb80ea4feb5382bd090dbd9
2010-10-08 22:31:17 -07:00
// Synthesizes cancelation events for the current state and resets the tracked state.
Remove unimplemented memory pool. dlmalloc does such a great job that we don't need a pool anyways. Change-Id: I105b28c4a5c491543959190c7c0a9de75a5b8052
2011-07-20 15:19:50 -07:00
void synthesizeCancelationEvents(nsecs_t currentTime,
Support chorded fallback keys. Also be more careful about canceling fallback keys during focus transitions, when the application handles the key, or when the policy decides to do something different. Fixed a crash due to JNI CallObjectMethod returning an undefined value (not null) when an exception is thrown. Fixed a crash due to the policy trying to create a Dialog for recent apps on the dispatcher thread. It should happen on the policy's Looper instead. Bug: 4187302 Change-Id: I659a3fd1bd2325ed36d965f9beb75dacb89790c9
2011-03-29 15:11:34 -07:00
Vector<EventEntry*>& outEvents, const CancelationOptions& options);
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
// Clears the current state.
void clear();
Track input state when transferring touch focus. Copies the input state to the destination window and sends synthesic cancelation events to the source window. Change-Id: Ia75820b0d756ed5d6cd22dce7830251ac85141ed
2010-10-11 18:32:20 -07:00
// Copies pointer-related parts of the input state to another instance.
void copyPointerStateTo(InputState& other) const;
Support chorded fallback keys. Also be more careful about canceling fallback keys during focus transitions, when the application handles the key, or when the policy decides to do something different. Fixed a crash due to JNI CallObjectMethod returning an undefined value (not null) when an exception is thrown. Fixed a crash due to the policy trying to create a Dialog for recent apps on the dispatcher thread. It should happen on the policy's Looper instead. Bug: 4187302 Change-Id: I659a3fd1bd2325ed36d965f9beb75dacb89790c9
2011-03-29 15:11:34 -07:00
// Gets the fallback key associated with a keycode.
// Returns -1 if none.
// Returns AKEYCODE_UNKNOWN if we are only dispatching the unhandled key to the policy.
int32_t getFallbackKey(int32_t originalKeyCode);
// Sets the fallback key for a particular keycode.
void setFallbackKey(int32_t originalKeyCode, int32_t fallbackKeyCode);
// Removes the fallback key for a particular keycode.
void removeFallbackKey(int32_t originalKeyCode);
inline const KeyedVector<int32_t, int32_t>& getFallbackKeys() const {
return mFallbackKeys;
}
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
private:
struct KeyMemento {
int32_t deviceId;
Fix crashes caused by some input devices. The touch screen sometimes reports more than 10 pointers even though that's all we asked for. When this happens, we start dropping events with more than 10 pointers. This confuses applications and causes them to crash. Raised the limit to 16 pointers. Bug: 3331247 The default behavior was to identify all touch devices as touch screens. External devices that are plugged in are more likely to be touch pads not attached to a screen. Changed the default to be a touch pad and renamed some internal constants to avoid confusion. A certain mouse happens to also behave like a touch pad. That caused problems because we would see multiple concurrent traces of motion events coming from the same input device so we would batch them up. Added code to ensure that we don't batch events unless they come from the same *source* in addition to coming from the same *device*. Due to batching or misbehaving drivers, it's possible for the set of pointer ids to be different from what we expect when it comes time to split motion events across windows. As a result, we can generate motion events with 0 pointers. When we try to deliver those events, we cause an error in the InputTransport so we tear down the InputChannel and kill the application. Added code to check out assumption about pointer ids and drop the event gracefully instead. Patched up the tests to take into account the change in default behavior for identifying touch screens and touch pads. Change-Id: Ic364bd4cb4cc6335d4a1213a26d6bdadc7e33505
2011-01-25 16:02:22 -08:00
uint32_t source;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
int32_t keyCode;
int32_t scanCode;
Add support for fallback keycodes. This change enables the framework to synthesize key events to implement default behavior when an application does not handle a key. For example, this change enables numeric keypad keys to perform their associated special function when numlock is off. The application is informed that it is processing a fallback keypress so it can choose to ignore it. Added a new keycode for switching applications. Added ALT key deadkeys. New default key mappings: - ESC -> BACK - Meta+ESC -> HOME - Alt+ESC -> MENU - Meta+Space -> SEARCH - Meta+Tab -> APP_SWITCH Fixed some comments. Fixed some tests. Change-Id: Id7f3b6645f3a350275e624547822f72652f3defe
2010-12-06 17:13:33 -08:00
int32_t flags;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
nsecs_t downTime;
};
struct MotionMemento {
int32_t deviceId;
Fix crashes caused by some input devices. The touch screen sometimes reports more than 10 pointers even though that's all we asked for. When this happens, we start dropping events with more than 10 pointers. This confuses applications and causes them to crash. Raised the limit to 16 pointers. Bug: 3331247 The default behavior was to identify all touch devices as touch screens. External devices that are plugged in are more likely to be touch pads not attached to a screen. Changed the default to be a touch pad and renamed some internal constants to avoid confusion. A certain mouse happens to also behave like a touch pad. That caused problems because we would see multiple concurrent traces of motion events coming from the same input device so we would batch them up. Added code to ensure that we don't batch events unless they come from the same *source* in addition to coming from the same *device*. Due to batching or misbehaving drivers, it's possible for the set of pointer ids to be different from what we expect when it comes time to split motion events across windows. As a result, we can generate motion events with 0 pointers. When we try to deliver those events, we cause an error in the InputTransport so we tear down the InputChannel and kill the application. Added code to check out assumption about pointer ids and drop the event gracefully instead. Patched up the tests to take into account the change in default behavior for identifying touch screens and touch pads. Change-Id: Ic364bd4cb4cc6335d4a1213a26d6bdadc7e33505
2011-01-25 16:02:22 -08:00
uint32_t source;
Improve input event consistency invariants. Fixed some issues where inconsistent streams of events could be generated by the dispatcher, particularly when switching from hovering with one device to hovering with another. Fixed a bug where the touch pad would fail to generate a new HOVER_MOVE following a tap event. As a result, the hover event stream would not resume until the user touched the touch pad again. Change-Id: I444dce84641fb12e56a0af84c931520771d6c493
2011-06-28 20:08:48 -07:00
int32_t flags;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
float xPrecision;
float yPrecision;
nsecs_t downTime;
uint32_t pointerCount;
Add initial API for stylus and mouse buttons. Added the concept of pointer properties in a MotionEvent. This is currently used to track the pointer tool type to enable applications to distinguish finger touches from a stylus. Button states are also reported to application as part of touch events. There are no new actions for detecting changes in button states. The application should instead query the button state from the MotionEvent and take appropriate action as needed. A good time to check the button state is on ACTION_DOWN. As a side-effect, applications that do not support multiple buttons will treat primary, secondary and tertiary buttons identically for all touch events. The back button on the mouse is mapped to KEYCODE_BACK and the forward button is mapped to KEYCODE_FORWARD. Added basic plumbing for the secondary mouse button to invoke the context menu, particularly in lists. Added clamp and split methods on MotionEvent to take care of common filtering operations so we don't have them scattered in multiple places across the framework. Bug: 4260011 Change-Id: Ie992b4d4e00c8f2e76b961da0a902145b27f6d83
2011-05-06 18:20:01 -07:00
PointerProperties pointerProperties[MAX_POINTERS];
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
PointerCoords pointerCoords[MAX_POINTERS];
Add MotionEvent.HOVER_ENTER and HOVER_EXIT. The input dispatcher sends a HOVER_ENTER to a window before dispatching it any HOVER_MOVE events. For compatibility reasons, the window will *also* receive the HOVER_MOVE. When the pointer moves into a different window or the pointer goes down or when events are canceled for some reason, the input dispatcher sends a HOVER_EXIT to the previously hovered window. The view hierarchy behavior is similar. All views under the pointer receive onHoverEvent with HOVER_ENTER followed by any number of HOVER_MOVE events. When the pointer leaves a view, the view receives HOVER_EXIT. Similarly, if a parent view decides to capture hover by returning true from onHoverEvent, the hovered descendants will receive HOVER_EXIT. The default behavior of onHoverEvent is to update the view's hovered state by calling setHovered(true/false). Views can query their current hovered state using isHovered(). For testing purposes, the hovered state is mapped to the pressed drawable state. This will change in a subsequent commit with the introduction of a new hovered drawable state. Change-Id: Ib76a7a90236c8f2c7336e55773acade6346cacbe
2011-03-07 16:56:21 -08:00
bool hovering;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
void setPointers(const MotionEntry* entry);
};
Vector<KeyMemento> mKeyMementos;
Vector<MotionMemento> mMotionMementos;
Support chorded fallback keys. Also be more careful about canceling fallback keys during focus transitions, when the application handles the key, or when the policy decides to do something different. Fixed a crash due to JNI CallObjectMethod returning an undefined value (not null) when an exception is thrown. Fixed a crash due to the policy trying to create a Dialog for recent apps on the dispatcher thread. It should happen on the policy's Looper instead. Bug: 4187302 Change-Id: I659a3fd1bd2325ed36d965f9beb75dacb89790c9
2011-03-29 15:11:34 -07:00
KeyedVector<int32_t, int32_t> mFallbackKeys;
Added more robust tracking and cancelation of events. This change fixes several issues where events would be dropped in the input dispatch pipeline in such a way that the dispatcher could not accurately track the state of the input device. Given more robust tracking, we can now also provide robust cancelation of input events in cases where an application might otherwise become out of sync with the event stream due to ANR, app switch, policy decisions, or forced focus transitions. Pruned some of the input dispatcher log output. Moved the responsibility for calling intercept*BeforeQueueing into the input dispatcher instead of the input reader and added support for early interception of injected events for events coming from trusted sources. This enables behaviors like injection of media keys while the screen is off, haptic feedback of injected virtual keys, so injected events become more "first class" in a way. Change-Id: Iec6ff1dd21e5f3c7feb80ea4feb5382bd090dbd9
2010-10-08 22:31:17 -07:00
Improve input event consistency invariants. Fixed some issues where inconsistent streams of events could be generated by the dispatcher, particularly when switching from hovering with one device to hovering with another. Fixed a bug where the touch pad would fail to generate a new HOVER_MOVE following a tap event. As a result, the hover event stream would not resume until the user touched the touch pad again. Change-Id: I444dce84641fb12e56a0af84c931520771d6c493
2011-06-28 20:08:48 -07:00
ssize_t findKeyMemento(const KeyEntry* entry) const;
ssize_t findMotionMemento(const MotionEntry* entry, bool hovering) const;
void addKeyMemento(const KeyEntry* entry, int32_t flags);
void addMotionMemento(const MotionEntry* entry, int32_t flags, bool hovering);
Add support for fallback keycodes. This change enables the framework to synthesize key events to implement default behavior when an application does not handle a key. For example, this change enables numeric keypad keys to perform their associated special function when numlock is off. The application is informed that it is processing a fallback keypress so it can choose to ignore it. Added a new keycode for switching applications. Added ALT key deadkeys. New default key mappings: - ESC -> BACK - Meta+ESC -> HOME - Alt+ESC -> MENU - Meta+Space -> SEARCH - Meta+Tab -> APP_SWITCH Fixed some comments. Fixed some tests. Change-Id: Id7f3b6645f3a350275e624547822f72652f3defe
2010-12-06 17:13:33 -08:00
static bool shouldCancelKey(const KeyMemento& memento,
Support chorded fallback keys. Also be more careful about canceling fallback keys during focus transitions, when the application handles the key, or when the policy decides to do something different. Fixed a crash due to JNI CallObjectMethod returning an undefined value (not null) when an exception is thrown. Fixed a crash due to the policy trying to create a Dialog for recent apps on the dispatcher thread. It should happen on the policy's Looper instead. Bug: 4187302 Change-Id: I659a3fd1bd2325ed36d965f9beb75dacb89790c9
2011-03-29 15:11:34 -07:00
const CancelationOptions& options);
Add support for fallback keycodes. This change enables the framework to synthesize key events to implement default behavior when an application does not handle a key. For example, this change enables numeric keypad keys to perform their associated special function when numlock is off. The application is informed that it is processing a fallback keypress so it can choose to ignore it. Added a new keycode for switching applications. Added ALT key deadkeys. New default key mappings: - ESC -> BACK - Meta+ESC -> HOME - Alt+ESC -> MENU - Meta+Space -> SEARCH - Meta+Tab -> APP_SWITCH Fixed some comments. Fixed some tests. Change-Id: Id7f3b6645f3a350275e624547822f72652f3defe
2010-12-06 17:13:33 -08:00
static bool shouldCancelMotion(const MotionMemento& memento,
Support chorded fallback keys. Also be more careful about canceling fallback keys during focus transitions, when the application handles the key, or when the policy decides to do something different. Fixed a crash due to JNI CallObjectMethod returning an undefined value (not null) when an exception is thrown. Fixed a crash due to the policy trying to create a Dialog for recent apps on the dispatcher thread. It should happen on the policy's Looper instead. Bug: 4187302 Change-Id: I659a3fd1bd2325ed36d965f9beb75dacb89790c9
2011-03-29 15:11:34 -07:00
const CancelationOptions& options);
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
};
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
/* Manages the dispatch state associated with a single input channel. */
class Connection : public RefBase {
protected:
virtual ~Connection();
public:
enum Status {
// Everything is peachy.
STATUS_NORMAL,
// An unrecoverable communication error has occurred.
STATUS_BROKEN,
// The input channel has been unregistered.
STATUS_ZOMBIE
};
Status status;
Prevent events from getting backlogged. This change implements two heuristics. 1. When events are older than 10 seconds, they are dropped. 2. If the application is currently busy processing an event and the user touches a window belonging to a different application then we drop the currently queued events so the other application can start processing the gesture immediately. Note that the system takes care of synthesizing cancelation events automatically for any events that it drops. Added some new handle types to allow the native dispatcher to indirectly refer to the WindowManager's window state and app window token. This was done to enable the dispatcher to identify the application to which each window belongs but it also eliminates some lookup tables and linear searches through the window list on each key press. Bug: 3224911 Change-Id: I9dae8dfe23d195d76865f97011fe2f1d351e2940
2011-01-10 11:17:36 -08:00
sp<InputChannel> inputChannel; // never null
sp<InputWindowHandle> inputWindowHandle; // may be null
Fix input channel leak. Bug: 5156144 Input channels could leak or simply live longer than they should in some cases. 1. Monitor channels (used by the pointer location overlay) are never unregistered, so they would leak. Added code to handle failures in the receive callback by closing the input channel. 2. The DragState held onto its input window and application handles even after the input channel was disposed. Added code to null these handles out when they are no longer needed. 3. Input channels previously used as input event targets would stick around until the targets were cleared (usually on the next event). Added code to detect when the input dispatcher is in an idle state and to proactively clear the targets then to ensure that resources are released promptly. 4. Native input window handles held onto the input channel even after the input window was removed from the input dispatcher. Consequently, the input channel would not be disposed until the input window handle itself was freed. Since the input window handle is held from managed code, this meant that the window's input channel could stick around until the next GC. Refactored the input window handle to separate the properties (info) and identify (handle) state into different objects. Then modified the dispatcher to release the properties (info) when no longer needed, including the input channel. 7. The pointer location overlay does not actually use its standard input channel, only the monitor input channel. Added INPUT_FEATURE_NO_INPUT_CHANNEL to allow windows to request that they not be provided with an input channel at all. Improved some of the error handling logic to emit the status code as part of the exception message. Change-Id: I01988d4391a70c6678c8b0e936ca051af680b1a5
2011-08-30 20:34:48 -07:00
bool monitor;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
InputPublisher inputPublisher;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
InputState inputState;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
Queue<DispatchEntry> outboundQueue;
nsecs_t lastEventTime; // the time when the event was originally captured
nsecs_t lastDispatchTime; // the time when the last event was dispatched
Prevent events from getting backlogged. This change implements two heuristics. 1. When events are older than 10 seconds, they are dropped. 2. If the application is currently busy processing an event and the user touches a window belonging to a different application then we drop the currently queued events so the other application can start processing the gesture immediately. Note that the system takes care of synthesizing cancelation events automatically for any events that it drops. Added some new handle types to allow the native dispatcher to indirectly refer to the WindowManager's window state and app window token. This was done to enable the dispatcher to identify the application to which each window belongs but it also eliminates some lookup tables and linear searches through the window list on each key press. Bug: 3224911 Change-Id: I9dae8dfe23d195d76865f97011fe2f1d351e2940
2011-01-10 11:17:36 -08:00
explicit Connection(const sp<InputChannel>& inputChannel,
Fix input channel leak. Bug: 5156144 Input channels could leak or simply live longer than they should in some cases. 1. Monitor channels (used by the pointer location overlay) are never unregistered, so they would leak. Added code to handle failures in the receive callback by closing the input channel. 2. The DragState held onto its input window and application handles even after the input channel was disposed. Added code to null these handles out when they are no longer needed. 3. Input channels previously used as input event targets would stick around until the targets were cleared (usually on the next event). Added code to detect when the input dispatcher is in an idle state and to proactively clear the targets then to ensure that resources are released promptly. 4. Native input window handles held onto the input channel even after the input window was removed from the input dispatcher. Consequently, the input channel would not be disposed until the input window handle itself was freed. Since the input window handle is held from managed code, this meant that the window's input channel could stick around until the next GC. Refactored the input window handle to separate the properties (info) and identify (handle) state into different objects. Then modified the dispatcher to release the properties (info) when no longer needed, including the input channel. 7. The pointer location overlay does not actually use its standard input channel, only the monitor input channel. Added INPUT_FEATURE_NO_INPUT_CHANNEL to allow windows to request that they not be provided with an input channel at all. Improved some of the error handling logic to emit the status code as part of the exception message. Change-Id: I01988d4391a70c6678c8b0e936ca051af680b1a5
2011-08-30 20:34:48 -07:00
const sp<InputWindowHandle>& inputWindowHandle, bool monitor);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 01:31:58 -07:00
inline const char* getInputChannelName() const { return inputChannel->getName().string(); }
const char* getStatusLabel() const;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
// Finds a DispatchEntry in the outbound queue associated with the specified event.
// Returns NULL if not found.
DispatchEntry* findQueuedDispatchEntryForEvent(const EventEntry* eventEntry) const;
// Gets the time since the current event was originally obtained from the input driver.
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
inline double getEventLatencyMillis(nsecs_t currentTime) const {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
return (currentTime - lastEventTime) / 1000000.0;
}
// Gets the time since the current event entered the outbound dispatch queue.
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
inline double getDispatchLatencyMillis(nsecs_t currentTime) const {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
return (currentTime - lastDispatchTime) / 1000000.0;
}
status_t initialize();
};
Added more robust tracking and cancelation of events. This change fixes several issues where events would be dropped in the input dispatch pipeline in such a way that the dispatcher could not accurately track the state of the input device. Given more robust tracking, we can now also provide robust cancelation of input events in cases where an application might otherwise become out of sync with the event stream due to ANR, app switch, policy decisions, or forced focus transitions. Pruned some of the input dispatcher log output. Moved the responsibility for calling intercept*BeforeQueueing into the input dispatcher instead of the input reader and added support for early interception of injected events for events coming from trusted sources. This enables behaviors like injection of media keys while the screen is off, haptic feedback of injected virtual keys, so injected events become more "first class" in a way. Change-Id: Iec6ff1dd21e5f3c7feb80ea4feb5382bd090dbd9
2010-10-08 22:31:17 -07:00
enum DropReason {
DROP_REASON_NOT_DROPPED = 0,
DROP_REASON_POLICY = 1,
DROP_REASON_APP_SWITCH = 2,
DROP_REASON_DISABLED = 3,
Prevent events from getting backlogged. This change implements two heuristics. 1. When events are older than 10 seconds, they are dropped. 2. If the application is currently busy processing an event and the user touches a window belonging to a different application then we drop the currently queued events so the other application can start processing the gesture immediately. Note that the system takes care of synthesizing cancelation events automatically for any events that it drops. Added some new handle types to allow the native dispatcher to indirectly refer to the WindowManager's window state and app window token. This was done to enable the dispatcher to identify the application to which each window belongs but it also eliminates some lookup tables and linear searches through the window list on each key press. Bug: 3224911 Change-Id: I9dae8dfe23d195d76865f97011fe2f1d351e2940
2011-01-10 11:17:36 -08:00
DROP_REASON_BLOCKED = 4,
DROP_REASON_STALE = 5,
Added more robust tracking and cancelation of events. This change fixes several issues where events would be dropped in the input dispatch pipeline in such a way that the dispatcher could not accurately track the state of the input device. Given more robust tracking, we can now also provide robust cancelation of input events in cases where an application might otherwise become out of sync with the event stream due to ANR, app switch, policy decisions, or forced focus transitions. Pruned some of the input dispatcher log output. Moved the responsibility for calling intercept*BeforeQueueing into the input dispatcher instead of the input reader and added support for early interception of injected events for events coming from trusted sources. This enables behaviors like injection of media keys while the screen is off, haptic feedback of injected virtual keys, so injected events become more "first class" in a way. Change-Id: Iec6ff1dd21e5f3c7feb80ea4feb5382bd090dbd9
2010-10-08 22:31:17 -07:00
};
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 01:31:58 -07:00
sp<InputDispatcherPolicyInterface> mPolicy;
Use ViewConfiguration to seed input system configuration. Fix bug where the pointer presentation would be updated on any input reader timeout rather than only when a pointer gesture is in progress. Bug: 4124987 Change-Id: Ie9bba4a0b3228d55e45e65fa2ede5cd6ba887a08
2011-05-26 19:17:02 -07:00
InputDispatcherConfiguration mConfig;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
Mutex mLock;
Replace epoll() with poll() and rename PollLoop to Looper. As part of this change, consolidated and cleaned up the Looper API so that there are fewer distinctions between the NDK and non-NDK declarations (no need for two callback types, etc.). Removed the dependence on specific constants from sys/poll.h such as POLLIN. Instead looper.h defines events like LOOPER_EVENT_INPUT for the events that it supports. That should help make any future under-the-hood implementation changes easier. Fixed a couple of compiler warnings along the way. Change-Id: I449a7ec780bf061bdd325452f823673e2b39b6ae
2010-09-13 23:17:30 -07:00
sp<Looper> mLooper;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
EventEntry* mPendingEvent;
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 01:31:58 -07:00
Queue<EventEntry> mInboundQueue;
Queue<CommandEntry> mCommandQueue;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
Vector<EventEntry*> mTempCancelationEvents;
Use ViewConfiguration to seed input system configuration. Fix bug where the pointer presentation would be updated on any input reader timeout rather than only when a pointer gesture is in progress. Bug: 4124987 Change-Id: Ie9bba4a0b3228d55e45e65fa2ede5cd6ba887a08
2011-05-26 19:17:02 -07:00
void dispatchOnceInnerLocked(nsecs_t* nextWakeupTime);
Fix input channel leak. Bug: 5156144 Input channels could leak or simply live longer than they should in some cases. 1. Monitor channels (used by the pointer location overlay) are never unregistered, so they would leak. Added code to handle failures in the receive callback by closing the input channel. 2. The DragState held onto its input window and application handles even after the input channel was disposed. Added code to null these handles out when they are no longer needed. 3. Input channels previously used as input event targets would stick around until the targets were cleared (usually on the next event). Added code to detect when the input dispatcher is in an idle state and to proactively clear the targets then to ensure that resources are released promptly. 4. Native input window handles held onto the input channel even after the input window was removed from the input dispatcher. Consequently, the input channel would not be disposed until the input window handle itself was freed. Since the input window handle is held from managed code, this meant that the window's input channel could stick around until the next GC. Refactored the input window handle to separate the properties (info) and identify (handle) state into different objects. Then modified the dispatcher to release the properties (info) when no longer needed, including the input channel. 7. The pointer location overlay does not actually use its standard input channel, only the monitor input channel. Added INPUT_FEATURE_NO_INPUT_CHANNEL to allow windows to request that they not be provided with an input channel at all. Improved some of the error handling logic to emit the status code as part of the exception message. Change-Id: I01988d4391a70c6678c8b0e936ca051af680b1a5
2011-08-30 20:34:48 -07:00
void dispatchIdleLocked();
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
Coalesce input events that arrive faster than 333Hz. Some drivers report individual finger updates one at a time instead of all at once. When 10 fingers are down, this can cause the framework to have to handle 10 times as many events each with 10 times as much data. Applications like PointerLocation would get significantly bogged down by all of the redundant samples. This change coalesces samples that are closely spaced in time, before they are dispatched, as part of the motion event batching protocol. Increased the size of the InputChannel shared memory buffer so that applications can catch up faster if they accumulate a backlog of samples. Added logging code to help measure input dispatch and drawing latency issues in the view hierarchy. See ViewDebug.DEBUG_LATENCY. Change-Id: Ia5898f781f19901d2225c529a910c32bdf4f504f
2011-04-07 11:38:09 -07:00
// Batches a new sample onto a motion entry.
// Assumes that the we have already checked that we can append samples.
void batchMotionLocked(MotionEntry* entry, nsecs_t eventTime, int32_t metaState,
const PointerCoords* pointerCoords, const char* eventDescription);
Replace epoll() with poll() and rename PollLoop to Looper. As part of this change, consolidated and cleaned up the Looper API so that there are fewer distinctions between the NDK and non-NDK declarations (no need for two callback types, etc.). Removed the dependence on specific constants from sys/poll.h such as POLLIN. Instead looper.h defines events like LOOPER_EVENT_INPUT for the events that it supports. That should help make any future under-the-hood implementation changes easier. Fixed a couple of compiler warnings along the way. Change-Id: I449a7ec780bf061bdd325452f823673e2b39b6ae
2010-09-13 23:17:30 -07:00
// Enqueues an inbound event. Returns true if mLooper->wake() should be called.
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
bool enqueueInboundEventLocked(EventEntry* entry);
Added more robust tracking and cancelation of events. This change fixes several issues where events would be dropped in the input dispatch pipeline in such a way that the dispatcher could not accurately track the state of the input device. Given more robust tracking, we can now also provide robust cancelation of input events in cases where an application might otherwise become out of sync with the event stream due to ANR, app switch, policy decisions, or forced focus transitions. Pruned some of the input dispatcher log output. Moved the responsibility for calling intercept*BeforeQueueing into the input dispatcher instead of the input reader and added support for early interception of injected events for events coming from trusted sources. This enables behaviors like injection of media keys while the screen is off, haptic feedback of injected virtual keys, so injected events become more "first class" in a way. Change-Id: Iec6ff1dd21e5f3c7feb80ea4feb5382bd090dbd9
2010-10-08 22:31:17 -07:00
// Cleans up input state when dropping an inbound event.
void dropInboundEventLocked(EventEntry* entry, DropReason dropReason);
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
// App switch latency optimization.
Added more robust tracking and cancelation of events. This change fixes several issues where events would be dropped in the input dispatch pipeline in such a way that the dispatcher could not accurately track the state of the input device. Given more robust tracking, we can now also provide robust cancelation of input events in cases where an application might otherwise become out of sync with the event stream due to ANR, app switch, policy decisions, or forced focus transitions. Pruned some of the input dispatcher log output. Moved the responsibility for calling intercept*BeforeQueueing into the input dispatcher instead of the input reader and added support for early interception of injected events for events coming from trusted sources. This enables behaviors like injection of media keys while the screen is off, haptic feedback of injected virtual keys, so injected events become more "first class" in a way. Change-Id: Iec6ff1dd21e5f3c7feb80ea4feb5382bd090dbd9
2010-10-08 22:31:17 -07:00
bool mAppSwitchSawKeyDown;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
nsecs_t mAppSwitchDueTime;
Added more robust tracking and cancelation of events. This change fixes several issues where events would be dropped in the input dispatch pipeline in such a way that the dispatcher could not accurately track the state of the input device. Given more robust tracking, we can now also provide robust cancelation of input events in cases where an application might otherwise become out of sync with the event stream due to ANR, app switch, policy decisions, or forced focus transitions. Pruned some of the input dispatcher log output. Moved the responsibility for calling intercept*BeforeQueueing into the input dispatcher instead of the input reader and added support for early interception of injected events for events coming from trusted sources. This enables behaviors like injection of media keys while the screen is off, haptic feedback of injected virtual keys, so injected events become more "first class" in a way. Change-Id: Iec6ff1dd21e5f3c7feb80ea4feb5382bd090dbd9
2010-10-08 22:31:17 -07:00
static bool isAppSwitchKeyCode(int32_t keyCode);
bool isAppSwitchKeyEventLocked(KeyEntry* keyEntry);
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
bool isAppSwitchPendingLocked();
void resetPendingAppSwitchLocked(bool handled);
Prevent events from getting backlogged. This change implements two heuristics. 1. When events are older than 10 seconds, they are dropped. 2. If the application is currently busy processing an event and the user touches a window belonging to a different application then we drop the currently queued events so the other application can start processing the gesture immediately. Note that the system takes care of synthesizing cancelation events automatically for any events that it drops. Added some new handle types to allow the native dispatcher to indirectly refer to the WindowManager's window state and app window token. This was done to enable the dispatcher to identify the application to which each window belongs but it also eliminates some lookup tables and linear searches through the window list on each key press. Bug: 3224911 Change-Id: I9dae8dfe23d195d76865f97011fe2f1d351e2940
2011-01-10 11:17:36 -08:00
// Stale event latency optimization.
static bool isStaleEventLocked(nsecs_t currentTime, EventEntry* entry);
// Blocked event latency optimization. Drops old events when the user intends
// to transfer focus to a new application.
EventEntry* mNextUnblockedEvent;
Refactor input dispatcher use of window/app handles. This change moves the cached window and application input state into the handle objects themselves. It simplifies the dispatcher somewhat because it no longer needs to fix up references to transient InputWindow objects each time the window list is updated. This change will also make it easier to optimize setInputWindows to avoid doing a lot of redundant data copying. In principle, only the modified fields need to be updated. However, for now we continue to update all fields in unison as before. It turns out that the input dispatcher was inappropriately retaining pointers to InputWindow objects within the mWindows InputWindow vector. This vector is copy-on-write so it is possible and the item pointers to change if an editing operation is performed on the vector when it does not exclusively own the underlying SharedBuffer. This bug was uncovered by a previous change that replaced calls to clear() and appendVector() with a simple use of operator= which caused the buffer to be shared. Consequently after editItemAt was called (which it shouldn't have, actually) the buffer was copied and the cached InputWindow pointers became invalid. Oops. This change fixes the problem. Change-Id: I0a259339a6015fcf9113dc4081a6875e047fd425
2011-07-13 22:51:29 -07:00
sp<InputWindowHandle> findTouchedWindowAtLocked(int32_t x, int32_t y);
Prevent events from getting backlogged. This change implements two heuristics. 1. When events are older than 10 seconds, they are dropped. 2. If the application is currently busy processing an event and the user touches a window belonging to a different application then we drop the currently queued events so the other application can start processing the gesture immediately. Note that the system takes care of synthesizing cancelation events automatically for any events that it drops. Added some new handle types to allow the native dispatcher to indirectly refer to the WindowManager's window state and app window token. This was done to enable the dispatcher to identify the application to which each window belongs but it also eliminates some lookup tables and linear searches through the window list on each key press. Bug: 3224911 Change-Id: I9dae8dfe23d195d76865f97011fe2f1d351e2940
2011-01-10 11:17:36 -08:00
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
// All registered connections mapped by receive pipe file descriptor.
KeyedVector<int, sp<Connection> > mConnectionsByReceiveFd;
Make input dispatcher only ANR for foreground windows. Redesigned the input dispatcher's ANR timeout mechanism so it is much closer to Froyo's policy. ANR is only ever signalled if the dispatcher is waiting on a window to finish processing its previous event(s) and there is new pending input. In the old code, we tracked the dispatch timeout separately for each input channel. This was somewhat complicated and also resulted in the situation where applications could ANR long after the user had pushed them into the background. Change-Id: I666ecada0952d4b95f1d67b9f733842b745c7f4b
2010-09-15 15:18:56 -07:00
ssize_t getConnectionIndexLocked(const sp<InputChannel>& inputChannel);
Fix possible race conditions during channel unregistration. Previously, the input dispatcher assumed that the input channel's receive pipe file descriptor was a sufficiently unique identifier for looking up input channels in its various tables. However, it can happen that an input channel is disposed and then a new input channel is immediately created that reuses the same file descriptor. Ordinarily this is not a problem, however there is a small opportunity for a race to arise in InputQueue. When InputQueue receives an input event from the dispatcher, it generates a finishedToken that encodes the channel's receive pipe fd, and a sequence number. The finishedToken is used by the ViewRoot as a handle for the event so that it can tell the InputQueue when the event has finished being processed. Here is the race: 1. InputQueue receives an input event, assigns a new finishedToken. 2. ViewRoot begins processing the input event. 3. During processing, ViewRoot unregisters the InputChannel. 4. A new InputChannel is created and is registered with the Input Queue. This InputChannel happens to have the same receive pipe fd as the one previously registered. 5. ViewRoot tells the InputQueue that it has finished processing the input event, passing along the original finishedToken. 6. InputQueue throws an exception because the finishedToken's receive pipe fd is registered but the sequence number is incorrect so it assumes that the client has called finish spuriously. The fix is to include a unique connection id within the finishedToken so that the InputQueue can accurately confirm that the token belongs to the currently registered InputChannel rather than to an old one that happened to have the same receive pipe fd. When it notices this, it ignores the spurious finish. I've also made a couple of other small changes to avoid similar races elsewhere. This patch set also includes a fix to synthesize a finished signal when the input channel is unregistered on the client side to help keep the server and client in sync. Bug: 2834068 Change-Id: I1de34a36249ab74c359c2c67a57e333543400f7b
2010-08-17 15:59:26 -07:00
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
// Active connections are connections that have a non-empty outbound queue.
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-17 20:52:56 -07:00
// We don't use a ref-counted pointer here because we explicitly abort connections
// during unregistration which causes the connection's outbound queue to be cleared
// and the connection itself to be deactivated.
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
Vector<Connection*> mActiveConnections;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
// Input channels that will receive a copy of all input events.
Vector<sp<InputChannel> > mMonitoringChannels;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-17 20:52:56 -07:00
// Event injection and synchronization.
Condition mInjectionResultAvailableCondition;
Added more robust tracking and cancelation of events. This change fixes several issues where events would be dropped in the input dispatch pipeline in such a way that the dispatcher could not accurately track the state of the input device. Given more robust tracking, we can now also provide robust cancelation of input events in cases where an application might otherwise become out of sync with the event stream due to ANR, app switch, policy decisions, or forced focus transitions. Pruned some of the input dispatcher log output. Moved the responsibility for calling intercept*BeforeQueueing into the input dispatcher instead of the input reader and added support for early interception of injected events for events coming from trusted sources. This enables behaviors like injection of media keys while the screen is off, haptic feedback of injected virtual keys, so injected events become more "first class" in a way. Change-Id: Iec6ff1dd21e5f3c7feb80ea4feb5382bd090dbd9
2010-10-08 22:31:17 -07:00
bool hasInjectionPermission(int32_t injectorPid, int32_t injectorUid);
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-17 20:52:56 -07:00
void setInjectionResultLocked(EventEntry* entry, int32_t injectionResult);
DO NOT MERGE: Fix input event injection ANRs on UI thread. Added a new asynchronous injection mode and made the existing synchronization mechanism more robust. Change-Id: Ia4aa04fd9b75ea2461a844c5b7933c831c1027e6
2010-07-28 15:48:59 -07:00
Condition mInjectionSyncFinishedCondition;
Add suuport for splitting touch events across windows. This feature is currently used to enable dragging the start and end selection handles of a TextView at the same time. Could be used for other things later. Deleted some dead code in ArrowKeyMovementMethod and CursorControllers. Change-Id: I930accd97ca1ca1917aab8a807db2c950fc7b409
2010-09-26 22:20:12 -07:00
void incrementPendingForegroundDispatchesLocked(EventEntry* entry);
Make input dispatcher only ANR for foreground windows. Redesigned the input dispatcher's ANR timeout mechanism so it is much closer to Froyo's policy. ANR is only ever signalled if the dispatcher is waiting on a window to finish processing its previous event(s) and there is new pending input. In the old code, we tracked the dispatch timeout separately for each input channel. This was somewhat complicated and also resulted in the situation where applications could ANR long after the user had pushed them into the background. Change-Id: I666ecada0952d4b95f1d67b9f733842b745c7f4b
2010-09-15 15:18:56 -07:00
void decrementPendingForegroundDispatchesLocked(EventEntry* entry);
DO NOT MERGE: Fix input event injection ANRs on UI thread. Added a new asynchronous injection mode and made the existing synchronization mechanism more robust. Change-Id: Ia4aa04fd9b75ea2461a844c5b7933c831c1027e6
2010-07-28 15:48:59 -07:00
Add support for throttling motion events. Change-Id: I24b3a17753e91ecda60a60fe5cd2e6b3260e033d
2010-08-18 15:51:08 -07:00
// Throttling state.
struct ThrottleState {
nsecs_t minTimeBetweenEvents;
nsecs_t lastEventTime;
int32_t lastDeviceId;
uint32_t lastSource;
uint32_t originalSampleCount; // only collected during debugging
} mThrottleState;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
// Key repeat tracking.
struct KeyRepeatState {
KeyEntry* lastKeyEntry; // or null if no repeat
nsecs_t nextRepeatTime;
} mKeyRepeatState;
void resetKeyRepeatLocked();
Use ViewConfiguration to seed input system configuration. Fix bug where the pointer presentation would be updated on any input reader timeout rather than only when a pointer gesture is in progress. Bug: 4124987 Change-Id: Ie9bba4a0b3228d55e45e65fa2ede5cd6ba887a08
2011-05-26 19:17:02 -07:00
KeyEntry* synthesizeKeyRepeatLocked(nsecs_t currentTime);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 01:31:58 -07:00
// Deferred command processing.
bool runCommandsLockedInterruptible();
CommandEntry* postCommandLocked(Command command);
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
// Inbound event processing.
void drainInboundQueueLocked();
Fix app switch latency optimization. This optimization was broken due to recent changes in how ANRs are handled. Change-Id: Ic99248a12755fadac8d4893e7d305b773e038d3d
2010-09-16 14:07:33 -07:00
void releasePendingEventLocked();
void releaseInboundEventLocked(EventEntry* entry);
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
// Dispatch state.
bool mDispatchEnabled;
bool mDispatchFrozen;
Add input filter mechanism for accessibility. This patch adds a mechanism for capturing, filtering, transforming and injecting input events at a very low level before the input dispatcher attempts to deliver them to applications. At this time, the mechanism is only intended to be used by the accessibility system to implement built-in system-level accessibility affordances. The accessibility input filter is currently just a stub. It logs the input events receives and reinjects them unchanged, except that it transforms KEYCODE_Q into KEYCODE_Z. Currently, the accessibility input filter is installed whenever accessibility is enabled. We'll probably want to change that so it only enables the input filter when a screen reader is installed and we want touch exploration. Change-Id: I35764fdf75522b69d09ebd78c9766eb7593c1afe
2011-03-30 02:25:18 -07:00
bool mInputFilterEnabled;
Add suuport for splitting touch events across windows. This feature is currently used to enable dragging the start and end selection handles of a TextView at the same time. Could be used for other things later. Deleted some dead code in ArrowKeyMovementMethod and CursorControllers. Change-Id: I930accd97ca1ca1917aab8a807db2c950fc7b409
2010-09-26 22:20:12 -07:00
Refactor input dispatcher use of window/app handles. This change moves the cached window and application input state into the handle objects themselves. It simplifies the dispatcher somewhat because it no longer needs to fix up references to transient InputWindow objects each time the window list is updated. This change will also make it easier to optimize setInputWindows to avoid doing a lot of redundant data copying. In principle, only the modified fields need to be updated. However, for now we continue to update all fields in unison as before. It turns out that the input dispatcher was inappropriately retaining pointers to InputWindow objects within the mWindows InputWindow vector. This vector is copy-on-write so it is possible and the item pointers to change if an editing operation is performed on the vector when it does not exclusively own the underlying SharedBuffer. This bug was uncovered by a previous change that replaced calls to clear() and appendVector() with a simple use of operator= which caused the buffer to be shared. Consequently after editItemAt was called (which it shouldn't have, actually) the buffer was copied and the cached InputWindow pointers became invalid. Oops. This change fixes the problem. Change-Id: I0a259339a6015fcf9113dc4081a6875e047fd425
2011-07-13 22:51:29 -07:00
Vector<sp<InputWindowHandle> > mWindowHandles;
Add suuport for splitting touch events across windows. This feature is currently used to enable dragging the start and end selection handles of a TextView at the same time. Could be used for other things later. Deleted some dead code in ArrowKeyMovementMethod and CursorControllers. Change-Id: I930accd97ca1ca1917aab8a807db2c950fc7b409
2010-09-26 22:20:12 -07:00
Refactor input dispatcher use of window/app handles. This change moves the cached window and application input state into the handle objects themselves. It simplifies the dispatcher somewhat because it no longer needs to fix up references to transient InputWindow objects each time the window list is updated. This change will also make it easier to optimize setInputWindows to avoid doing a lot of redundant data copying. In principle, only the modified fields need to be updated. However, for now we continue to update all fields in unison as before. It turns out that the input dispatcher was inappropriately retaining pointers to InputWindow objects within the mWindows InputWindow vector. This vector is copy-on-write so it is possible and the item pointers to change if an editing operation is performed on the vector when it does not exclusively own the underlying SharedBuffer. This bug was uncovered by a previous change that replaced calls to clear() and appendVector() with a simple use of operator= which caused the buffer to be shared. Consequently after editItemAt was called (which it shouldn't have, actually) the buffer was copied and the cached InputWindow pointers became invalid. Oops. This change fixes the problem. Change-Id: I0a259339a6015fcf9113dc4081a6875e047fd425
2011-07-13 22:51:29 -07:00
sp<InputWindowHandle> getWindowHandleLocked(const sp<InputChannel>& inputChannel) const;
bool hasWindowHandleLocked(const sp<InputWindowHandle>& windowHandle) const;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
// Focus tracking for keys, trackball, etc.
Refactor input dispatcher use of window/app handles. This change moves the cached window and application input state into the handle objects themselves. It simplifies the dispatcher somewhat because it no longer needs to fix up references to transient InputWindow objects each time the window list is updated. This change will also make it easier to optimize setInputWindows to avoid doing a lot of redundant data copying. In principle, only the modified fields need to be updated. However, for now we continue to update all fields in unison as before. It turns out that the input dispatcher was inappropriately retaining pointers to InputWindow objects within the mWindows InputWindow vector. This vector is copy-on-write so it is possible and the item pointers to change if an editing operation is performed on the vector when it does not exclusively own the underlying SharedBuffer. This bug was uncovered by a previous change that replaced calls to clear() and appendVector() with a simple use of operator= which caused the buffer to be shared. Consequently after editItemAt was called (which it shouldn't have, actually) the buffer was copied and the cached InputWindow pointers became invalid. Oops. This change fixes the problem. Change-Id: I0a259339a6015fcf9113dc4081a6875e047fd425
2011-07-13 22:51:29 -07:00
sp<InputWindowHandle> mFocusedWindowHandle;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
// Focus tracking for touch.
Add suuport for splitting touch events across windows. This feature is currently used to enable dragging the start and end selection handles of a TextView at the same time. Could be used for other things later. Deleted some dead code in ArrowKeyMovementMethod and CursorControllers. Change-Id: I930accd97ca1ca1917aab8a807db2c950fc7b409
2010-09-26 22:20:12 -07:00
struct TouchedWindow {
Refactor input dispatcher use of window/app handles. This change moves the cached window and application input state into the handle objects themselves. It simplifies the dispatcher somewhat because it no longer needs to fix up references to transient InputWindow objects each time the window list is updated. This change will also make it easier to optimize setInputWindows to avoid doing a lot of redundant data copying. In principle, only the modified fields need to be updated. However, for now we continue to update all fields in unison as before. It turns out that the input dispatcher was inappropriately retaining pointers to InputWindow objects within the mWindows InputWindow vector. This vector is copy-on-write so it is possible and the item pointers to change if an editing operation is performed on the vector when it does not exclusively own the underlying SharedBuffer. This bug was uncovered by a previous change that replaced calls to clear() and appendVector() with a simple use of operator= which caused the buffer to be shared. Consequently after editItemAt was called (which it shouldn't have, actually) the buffer was copied and the cached InputWindow pointers became invalid. Oops. This change fixes the problem. Change-Id: I0a259339a6015fcf9113dc4081a6875e047fd425
2011-07-13 22:51:29 -07:00
sp<InputWindowHandle> windowHandle;
Add suuport for splitting touch events across windows. This feature is currently used to enable dragging the start and end selection handles of a TextView at the same time. Could be used for other things later. Deleted some dead code in ArrowKeyMovementMethod and CursorControllers. Change-Id: I930accd97ca1ca1917aab8a807db2c950fc7b409
2010-09-26 22:20:12 -07:00
int32_t targetFlags;
Enable touch splitting for all windows by default. New default only applies to applications with targetSdkVersion >= HONEYCOMB. Old applications default to no touch splitting for their windows. In addition, enabled split touch for various system windows. Bug: 3049580 Change-Id: Idc8da9baa2cd8e1e4e76af8967d7b6a5ccb94427
2010-11-10 16:53:45 -08:00
BitSet32 pointerIds; // zero unless target flag FLAG_SPLIT is set
Add suuport for splitting touch events across windows. This feature is currently used to enable dragging the start and end selection handles of a TextView at the same time. Could be used for other things later. Deleted some dead code in ArrowKeyMovementMethod and CursorControllers. Change-Id: I930accd97ca1ca1917aab8a807db2c950fc7b409
2010-09-26 22:20:12 -07:00
};
struct TouchState {
bool down;
bool split;
Only allow touch events from one device at a time. Reject movements from other devices when one device is already down. This fixes jittery behavior when the user moves the mouse and touches the screen at the same time. Change-Id: I99151c8f2596a3139720f776bcbc559d4b314878
2011-01-04 19:41:59 -08:00
int32_t deviceId; // id of the device that is currently down, others are rejected
Fix crashes caused by some input devices. The touch screen sometimes reports more than 10 pointers even though that's all we asked for. When this happens, we start dropping events with more than 10 pointers. This confuses applications and causes them to crash. Raised the limit to 16 pointers. Bug: 3331247 The default behavior was to identify all touch devices as touch screens. External devices that are plugged in are more likely to be touch pads not attached to a screen. Changed the default to be a touch pad and renamed some internal constants to avoid confusion. A certain mouse happens to also behave like a touch pad. That caused problems because we would see multiple concurrent traces of motion events coming from the same input device so we would batch them up. Added code to ensure that we don't batch events unless they come from the same *source* in addition to coming from the same *device*. Due to batching or misbehaving drivers, it's possible for the set of pointer ids to be different from what we expect when it comes time to split motion events across windows. As a result, we can generate motion events with 0 pointers. When we try to deliver those events, we cause an error in the InputTransport so we tear down the InputChannel and kill the application. Added code to check out assumption about pointer ids and drop the event gracefully instead. Patched up the tests to take into account the change in default behavior for identifying touch screens and touch pads. Change-Id: Ic364bd4cb4cc6335d4a1213a26d6bdadc7e33505
2011-01-25 16:02:22 -08:00
uint32_t source; // source of the device that is current down, others are rejected
Add suuport for splitting touch events across windows. This feature is currently used to enable dragging the start and end selection handles of a TextView at the same time. Could be used for other things later. Deleted some dead code in ArrowKeyMovementMethod and CursorControllers. Change-Id: I930accd97ca1ca1917aab8a807db2c950fc7b409
2010-09-26 22:20:12 -07:00
Vector<TouchedWindow> windows;
TouchState();
~TouchState();
void reset();
void copyFrom(const TouchState& other);
Refactor input dispatcher use of window/app handles. This change moves the cached window and application input state into the handle objects themselves. It simplifies the dispatcher somewhat because it no longer needs to fix up references to transient InputWindow objects each time the window list is updated. This change will also make it easier to optimize setInputWindows to avoid doing a lot of redundant data copying. In principle, only the modified fields need to be updated. However, for now we continue to update all fields in unison as before. It turns out that the input dispatcher was inappropriately retaining pointers to InputWindow objects within the mWindows InputWindow vector. This vector is copy-on-write so it is possible and the item pointers to change if an editing operation is performed on the vector when it does not exclusively own the underlying SharedBuffer. This bug was uncovered by a previous change that replaced calls to clear() and appendVector() with a simple use of operator= which caused the buffer to be shared. Consequently after editItemAt was called (which it shouldn't have, actually) the buffer was copied and the cached InputWindow pointers became invalid. Oops. This change fixes the problem. Change-Id: I0a259339a6015fcf9113dc4081a6875e047fd425
2011-07-13 22:51:29 -07:00
void addOrUpdateWindow(const sp<InputWindowHandle>& windowHandle,
int32_t targetFlags, BitSet32 pointerIds);
Add MotionEvent.HOVER_ENTER and HOVER_EXIT. The input dispatcher sends a HOVER_ENTER to a window before dispatching it any HOVER_MOVE events. For compatibility reasons, the window will *also* receive the HOVER_MOVE. When the pointer moves into a different window or the pointer goes down or when events are canceled for some reason, the input dispatcher sends a HOVER_EXIT to the previously hovered window. The view hierarchy behavior is similar. All views under the pointer receive onHoverEvent with HOVER_ENTER followed by any number of HOVER_MOVE events. When the pointer leaves a view, the view receives HOVER_EXIT. Similarly, if a parent view decides to capture hover by returning true from onHoverEvent, the hovered descendants will receive HOVER_EXIT. The default behavior of onHoverEvent is to update the view's hovered state by calling setHovered(true/false). Views can query their current hovered state using isHovered(). For testing purposes, the hovered state is mapped to the pressed drawable state. This will change in a subsequent commit with the introduction of a new hovered drawable state. Change-Id: Ib76a7a90236c8f2c7336e55773acade6346cacbe
2011-03-07 16:56:21 -08:00
void filterNonAsIsTouchWindows();
Refactor input dispatcher use of window/app handles. This change moves the cached window and application input state into the handle objects themselves. It simplifies the dispatcher somewhat because it no longer needs to fix up references to transient InputWindow objects each time the window list is updated. This change will also make it easier to optimize setInputWindows to avoid doing a lot of redundant data copying. In principle, only the modified fields need to be updated. However, for now we continue to update all fields in unison as before. It turns out that the input dispatcher was inappropriately retaining pointers to InputWindow objects within the mWindows InputWindow vector. This vector is copy-on-write so it is possible and the item pointers to change if an editing operation is performed on the vector when it does not exclusively own the underlying SharedBuffer. This bug was uncovered by a previous change that replaced calls to clear() and appendVector() with a simple use of operator= which caused the buffer to be shared. Consequently after editItemAt was called (which it shouldn't have, actually) the buffer was copied and the cached InputWindow pointers became invalid. Oops. This change fixes the problem. Change-Id: I0a259339a6015fcf9113dc4081a6875e047fd425
2011-07-13 22:51:29 -07:00
sp<InputWindowHandle> getFirstForegroundWindowHandle() const;
Allow touches to slide out of the navigation bar. Change-Id: I73cabba3d62f47829bf6217700ace56a27c42b1d
2011-06-08 15:37:10 -07:00
bool isSlippery() const;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
};
Add suuport for splitting touch events across windows. This feature is currently used to enable dragging the start and end selection handles of a TextView at the same time. Could be used for other things later. Deleted some dead code in ArrowKeyMovementMethod and CursorControllers. Change-Id: I930accd97ca1ca1917aab8a807db2c950fc7b409
2010-09-26 22:20:12 -07:00
TouchState mTouchState;
TouchState mTempTouchState;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
// Focused application.
Refactor input dispatcher use of window/app handles. This change moves the cached window and application input state into the handle objects themselves. It simplifies the dispatcher somewhat because it no longer needs to fix up references to transient InputWindow objects each time the window list is updated. This change will also make it easier to optimize setInputWindows to avoid doing a lot of redundant data copying. In principle, only the modified fields need to be updated. However, for now we continue to update all fields in unison as before. It turns out that the input dispatcher was inappropriately retaining pointers to InputWindow objects within the mWindows InputWindow vector. This vector is copy-on-write so it is possible and the item pointers to change if an editing operation is performed on the vector when it does not exclusively own the underlying SharedBuffer. This bug was uncovered by a previous change that replaced calls to clear() and appendVector() with a simple use of operator= which caused the buffer to be shared. Consequently after editItemAt was called (which it shouldn't have, actually) the buffer was copied and the cached InputWindow pointers became invalid. Oops. This change fixes the problem. Change-Id: I0a259339a6015fcf9113dc4081a6875e047fd425
2011-07-13 22:51:29 -07:00
sp<InputApplicationHandle> mFocusedApplicationHandle;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
// Dispatch inbound events.
bool dispatchConfigurationChangedLocked(
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 01:31:58 -07:00
nsecs_t currentTime, ConfigurationChangedEntry* entry);
Input system bug fixes, particularly for stylus. Bug: 5049148 Finished stylus support, including support for indirect stylus and mouse tools. Added TILT axis. When stylus tilt X/Y is available, it is transformed into an orientation and tilt inclination which is a more convenient representation and a simpler extension to the exiting API. Touch devices now only report touch data using a single input source. Previously touch devices in pointer mode would report both absolute touch pad data and cooked pointer gestures. Now we just pick one. The touch device switches modes as needed when the focused application enables/disables pointer gestures. This change greatly simplifies the code and reduces the load on the input dispatcher. Fixed an incorrect assumption that the value of ABS_(MT_)DISTANCE would be zero whenever the stylus was in direct contact. It appears that the correct way to determine whether the stylus is in direct contact (rather than hovering) is by checking for a non-zero reported pressure. Added code to read the initial state of tool buttons and axis values when the input devices are initialized or reset. This fixes problems where the input mapper state might have the wrong initial state. Moved responsibility for cancelling pending inputs (keys down, touches, etc.) to the InputDispatcher by sending it a device reset notification. This frees the InputReader from having to synthesize events during reset, which was cumbersome and somewhat brittle to begin with. Consolidated more of the common accumulator logic from SingleTouchInputMapper and MultiTouchInputMapper into TouchInputMapper. Improved the PointerLocation output. Change-Id: I595d3647f7fd7cb1e3eff8b3c76b85043b5fe2f0
2011-08-18 11:20:58 -07:00
bool dispatchDeviceResetLocked(
nsecs_t currentTime, DeviceResetEntry* entry);
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
bool dispatchKeyLocked(
Use ViewConfiguration to seed input system configuration. Fix bug where the pointer presentation would be updated on any input reader timeout rather than only when a pointer gesture is in progress. Bug: 4124987 Change-Id: Ie9bba4a0b3228d55e45e65fa2ede5cd6ba887a08
2011-05-26 19:17:02 -07:00
nsecs_t currentTime, KeyEntry* entry,
Fix an event injection bug when the policy is bypassed. Added the concept of a "trusted" event to distinguish between events from attached input devices or trusted injectors vs. other applications. This change enables us to move certain policy decisions out of the dispatcher and into the policy itself where they can be handled more systematically. Cherry pick of b931a1b4 from gingerbread into master. Change-Id: I700a5f07b8b227878cea9437a289a45a245c0424
2010-10-11 14:20:19 -07:00
DropReason* dropReason, nsecs_t* nextWakeupTime);
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
bool dispatchMotionLocked(
nsecs_t currentTime, MotionEntry* entry,
Fix an event injection bug when the policy is bypassed. Added the concept of a "trusted" event to distinguish between events from attached input devices or trusted injectors vs. other applications. This change enables us to move certain policy decisions out of the dispatcher and into the policy itself where they can be handled more systematically. Cherry pick of b931a1b4 from gingerbread into master. Change-Id: I700a5f07b8b227878cea9437a289a45a245c0424
2010-10-11 14:20:19 -07:00
DropReason* dropReason, nsecs_t* nextWakeupTime);
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 01:31:58 -07:00
void dispatchEventToCurrentInputTargetsLocked(
nsecs_t currentTime, EventEntry* entry, bool resumeWithAppendedMotionSample);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
void logOutboundKeyDetailsLocked(const char* prefix, const KeyEntry* entry);
void logOutboundMotionDetailsLocked(const char* prefix, const MotionEntry* entry);
// The input targets that were most recently identified for dispatch.
bool mCurrentInputTargetsValid; // false while targets are being recomputed
Vector<InputTarget> mCurrentInputTargets;
enum InputTargetWaitCause {
INPUT_TARGET_WAIT_CAUSE_NONE,
INPUT_TARGET_WAIT_CAUSE_SYSTEM_NOT_READY,
INPUT_TARGET_WAIT_CAUSE_APPLICATION_NOT_READY,
};
InputTargetWaitCause mInputTargetWaitCause;
nsecs_t mInputTargetWaitStartTime;
nsecs_t mInputTargetWaitTimeoutTime;
bool mInputTargetWaitTimeoutExpired;
Refactor input dispatcher use of window/app handles. This change moves the cached window and application input state into the handle objects themselves. It simplifies the dispatcher somewhat because it no longer needs to fix up references to transient InputWindow objects each time the window list is updated. This change will also make it easier to optimize setInputWindows to avoid doing a lot of redundant data copying. In principle, only the modified fields need to be updated. However, for now we continue to update all fields in unison as before. It turns out that the input dispatcher was inappropriately retaining pointers to InputWindow objects within the mWindows InputWindow vector. This vector is copy-on-write so it is possible and the item pointers to change if an editing operation is performed on the vector when it does not exclusively own the underlying SharedBuffer. This bug was uncovered by a previous change that replaced calls to clear() and appendVector() with a simple use of operator= which caused the buffer to be shared. Consequently after editItemAt was called (which it shouldn't have, actually) the buffer was copied and the cached InputWindow pointers became invalid. Oops. This change fixes the problem. Change-Id: I0a259339a6015fcf9113dc4081a6875e047fd425
2011-07-13 22:51:29 -07:00
sp<InputApplicationHandle> mInputTargetWaitApplicationHandle;
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
Add MotionEvent.HOVER_ENTER and HOVER_EXIT. The input dispatcher sends a HOVER_ENTER to a window before dispatching it any HOVER_MOVE events. For compatibility reasons, the window will *also* receive the HOVER_MOVE. When the pointer moves into a different window or the pointer goes down or when events are canceled for some reason, the input dispatcher sends a HOVER_EXIT to the previously hovered window. The view hierarchy behavior is similar. All views under the pointer receive onHoverEvent with HOVER_ENTER followed by any number of HOVER_MOVE events. When the pointer leaves a view, the view receives HOVER_EXIT. Similarly, if a parent view decides to capture hover by returning true from onHoverEvent, the hovered descendants will receive HOVER_EXIT. The default behavior of onHoverEvent is to update the view's hovered state by calling setHovered(true/false). Views can query their current hovered state using isHovered(). For testing purposes, the hovered state is mapped to the pressed drawable state. This will change in a subsequent commit with the introduction of a new hovered drawable state. Change-Id: Ib76a7a90236c8f2c7336e55773acade6346cacbe
2011-03-07 16:56:21 -08:00
// Contains the last window which received a hover event.
Refactor input dispatcher use of window/app handles. This change moves the cached window and application input state into the handle objects themselves. It simplifies the dispatcher somewhat because it no longer needs to fix up references to transient InputWindow objects each time the window list is updated. This change will also make it easier to optimize setInputWindows to avoid doing a lot of redundant data copying. In principle, only the modified fields need to be updated. However, for now we continue to update all fields in unison as before. It turns out that the input dispatcher was inappropriately retaining pointers to InputWindow objects within the mWindows InputWindow vector. This vector is copy-on-write so it is possible and the item pointers to change if an editing operation is performed on the vector when it does not exclusively own the underlying SharedBuffer. This bug was uncovered by a previous change that replaced calls to clear() and appendVector() with a simple use of operator= which caused the buffer to be shared. Consequently after editItemAt was called (which it shouldn't have, actually) the buffer was copied and the cached InputWindow pointers became invalid. Oops. This change fixes the problem. Change-Id: I0a259339a6015fcf9113dc4081a6875e047fd425
2011-07-13 22:51:29 -07:00
sp<InputWindowHandle> mLastHoverWindowHandle;
Add MotionEvent.HOVER_ENTER and HOVER_EXIT. The input dispatcher sends a HOVER_ENTER to a window before dispatching it any HOVER_MOVE events. For compatibility reasons, the window will *also* receive the HOVER_MOVE. When the pointer moves into a different window or the pointer goes down or when events are canceled for some reason, the input dispatcher sends a HOVER_EXIT to the previously hovered window. The view hierarchy behavior is similar. All views under the pointer receive onHoverEvent with HOVER_ENTER followed by any number of HOVER_MOVE events. When the pointer leaves a view, the view receives HOVER_EXIT. Similarly, if a parent view decides to capture hover by returning true from onHoverEvent, the hovered descendants will receive HOVER_EXIT. The default behavior of onHoverEvent is to update the view's hovered state by calling setHovered(true/false). Views can query their current hovered state using isHovered(). For testing purposes, the hovered state is mapped to the pressed drawable state. This will change in a subsequent commit with the introduction of a new hovered drawable state. Change-Id: Ib76a7a90236c8f2c7336e55773acade6346cacbe
2011-03-07 16:56:21 -08:00
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
// Finding targets for input events.
Fix app switch latency optimization. This optimization was broken due to recent changes in how ANRs are handled. Change-Id: Ic99248a12755fadac8d4893e7d305b773e038d3d
2010-09-16 14:07:33 -07:00
void resetTargetsLocked();
Add suuport for splitting touch events across windows. This feature is currently used to enable dragging the start and end selection handles of a TextView at the same time. Could be used for other things later. Deleted some dead code in ArrowKeyMovementMethod and CursorControllers. Change-Id: I930accd97ca1ca1917aab8a807db2c950fc7b409
2010-09-26 22:20:12 -07:00
void commitTargetsLocked();
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
int32_t handleTargetsNotReadyLocked(nsecs_t currentTime, const EventEntry* entry,
Refactor input dispatcher use of window/app handles. This change moves the cached window and application input state into the handle objects themselves. It simplifies the dispatcher somewhat because it no longer needs to fix up references to transient InputWindow objects each time the window list is updated. This change will also make it easier to optimize setInputWindows to avoid doing a lot of redundant data copying. In principle, only the modified fields need to be updated. However, for now we continue to update all fields in unison as before. It turns out that the input dispatcher was inappropriately retaining pointers to InputWindow objects within the mWindows InputWindow vector. This vector is copy-on-write so it is possible and the item pointers to change if an editing operation is performed on the vector when it does not exclusively own the underlying SharedBuffer. This bug was uncovered by a previous change that replaced calls to clear() and appendVector() with a simple use of operator= which caused the buffer to be shared. Consequently after editItemAt was called (which it shouldn't have, actually) the buffer was copied and the cached InputWindow pointers became invalid. Oops. This change fixes the problem. Change-Id: I0a259339a6015fcf9113dc4081a6875e047fd425
2011-07-13 22:51:29 -07:00
const sp<InputApplicationHandle>& applicationHandle,
const sp<InputWindowHandle>& windowHandle,
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
nsecs_t* nextWakeupTime);
Make input dispatcher only ANR for foreground windows. Redesigned the input dispatcher's ANR timeout mechanism so it is much closer to Froyo's policy. ANR is only ever signalled if the dispatcher is waiting on a window to finish processing its previous event(s) and there is new pending input. In the old code, we tracked the dispatch timeout separately for each input channel. This was somewhat complicated and also resulted in the situation where applications could ANR long after the user had pushed them into the background. Change-Id: I666ecada0952d4b95f1d67b9f733842b745c7f4b
2010-09-15 15:18:56 -07:00
void resumeAfterTargetsNotReadyTimeoutLocked(nsecs_t newTimeout,
const sp<InputChannel>& inputChannel);
nsecs_t getTimeSpentWaitingForApplicationLocked(nsecs_t currentTime);
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
void resetANRTimeoutsLocked();
Add suuport for splitting touch events across windows. This feature is currently used to enable dragging the start and end selection handles of a TextView at the same time. Could be used for other things later. Deleted some dead code in ArrowKeyMovementMethod and CursorControllers. Change-Id: I930accd97ca1ca1917aab8a807db2c950fc7b409
2010-09-26 22:20:12 -07:00
int32_t findFocusedWindowTargetsLocked(nsecs_t currentTime, const EventEntry* entry,
nsecs_t* nextWakeupTime);
int32_t findTouchedWindowTargetsLocked(nsecs_t currentTime, const MotionEntry* entry,
Add MotionEvent.HOVER_ENTER and HOVER_EXIT. The input dispatcher sends a HOVER_ENTER to a window before dispatching it any HOVER_MOVE events. For compatibility reasons, the window will *also* receive the HOVER_MOVE. When the pointer moves into a different window or the pointer goes down or when events are canceled for some reason, the input dispatcher sends a HOVER_EXIT to the previously hovered window. The view hierarchy behavior is similar. All views under the pointer receive onHoverEvent with HOVER_ENTER followed by any number of HOVER_MOVE events. When the pointer leaves a view, the view receives HOVER_EXIT. Similarly, if a parent view decides to capture hover by returning true from onHoverEvent, the hovered descendants will receive HOVER_EXIT. The default behavior of onHoverEvent is to update the view's hovered state by calling setHovered(true/false). Views can query their current hovered state using isHovered(). For testing purposes, the hovered state is mapped to the pressed drawable state. This will change in a subsequent commit with the introduction of a new hovered drawable state. Change-Id: Ib76a7a90236c8f2c7336e55773acade6346cacbe
2011-03-07 16:56:21 -08:00
nsecs_t* nextWakeupTime, bool* outConflictingPointerActions,
const MotionSample** outSplitBatchAfterSample);
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
Refactor input dispatcher use of window/app handles. This change moves the cached window and application input state into the handle objects themselves. It simplifies the dispatcher somewhat because it no longer needs to fix up references to transient InputWindow objects each time the window list is updated. This change will also make it easier to optimize setInputWindows to avoid doing a lot of redundant data copying. In principle, only the modified fields need to be updated. However, for now we continue to update all fields in unison as before. It turns out that the input dispatcher was inappropriately retaining pointers to InputWindow objects within the mWindows InputWindow vector. This vector is copy-on-write so it is possible and the item pointers to change if an editing operation is performed on the vector when it does not exclusively own the underlying SharedBuffer. This bug was uncovered by a previous change that replaced calls to clear() and appendVector() with a simple use of operator= which caused the buffer to be shared. Consequently after editItemAt was called (which it shouldn't have, actually) the buffer was copied and the cached InputWindow pointers became invalid. Oops. This change fixes the problem. Change-Id: I0a259339a6015fcf9113dc4081a6875e047fd425
2011-07-13 22:51:29 -07:00
void addWindowTargetLocked(const sp<InputWindowHandle>& windowHandle,
int32_t targetFlags, BitSet32 pointerIds);
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
void addMonitoringTargetsLocked();
Fix bug where home presses were not poking user activity. We now poke user activity twice: once upon dequeueing an event for dispatch and then again just before we dispatch it. The second poke is to compensate for the fact that it can take a few seconds to identify the dispatch target (if the application is responding slowly) but we want to keep the display from going to sleep for X amount of time after the app gets a chance to actually receive the event. This mirrors pre-Gingerbread behavior. Removed some unnecessary code that filters user activity pokes when sending events to KeyGuard. We don't need this because KeyGuard already tells the power manager to disable user activity. Bug: 3101397 Change-Id: I8c3a77601fdef8f584e84cfdd11aa79da0ff51db
2010-10-18 13:21:23 -07:00
void pokeUserActivityLocked(const EventEntry* eventEntry);
Refactor input dispatcher use of window/app handles. This change moves the cached window and application input state into the handle objects themselves. It simplifies the dispatcher somewhat because it no longer needs to fix up references to transient InputWindow objects each time the window list is updated. This change will also make it easier to optimize setInputWindows to avoid doing a lot of redundant data copying. In principle, only the modified fields need to be updated. However, for now we continue to update all fields in unison as before. It turns out that the input dispatcher was inappropriately retaining pointers to InputWindow objects within the mWindows InputWindow vector. This vector is copy-on-write so it is possible and the item pointers to change if an editing operation is performed on the vector when it does not exclusively own the underlying SharedBuffer. This bug was uncovered by a previous change that replaced calls to clear() and appendVector() with a simple use of operator= which caused the buffer to be shared. Consequently after editItemAt was called (which it shouldn't have, actually) the buffer was copied and the cached InputWindow pointers became invalid. Oops. This change fixes the problem. Change-Id: I0a259339a6015fcf9113dc4081a6875e047fd425
2011-07-13 22:51:29 -07:00
bool checkInjectionPermission(const sp<InputWindowHandle>& windowHandle,
const InjectionState* injectionState);
bool isWindowObscuredAtPointLocked(const sp<InputWindowHandle>& windowHandle,
int32_t x, int32_t y) const;
bool isWindowFinishedWithPreviousInputLocked(const sp<InputWindowHandle>& windowHandle);
String8 getApplicationWindowLabelLocked(const sp<InputApplicationHandle>& applicationHandle,
const sp<InputWindowHandle>& windowHandle);
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
// Manage the dispatch cycle for a single connection.
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-17 20:52:56 -07:00
// These methods are deliberately not Interruptible because doing all of the work
// with the mutex held makes it easier to ensure that connection invariants are maintained.
// If needed, the methods post commands to run later once the critical bits are done.
void prepareDispatchCycleLocked(nsecs_t currentTime, const sp<Connection>& connection,
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
EventEntry* eventEntry, const InputTarget* inputTarget,
Fix a few memory leaks in the input dispatcher. Bug: 5862398 Change-Id: Iae3284a223b8307f541a7987f90f5b28e70b9244
2012-01-12 18:30:12 -08:00
bool resumeWithAppendedMotionSample);
void enqueueDispatchEntriesLocked(nsecs_t currentTime, const sp<Connection>& connection,
EventEntry* eventEntry, const InputTarget* inputTarget,
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
bool resumeWithAppendedMotionSample);
Add MotionEvent.HOVER_ENTER and HOVER_EXIT. The input dispatcher sends a HOVER_ENTER to a window before dispatching it any HOVER_MOVE events. For compatibility reasons, the window will *also* receive the HOVER_MOVE. When the pointer moves into a different window or the pointer goes down or when events are canceled for some reason, the input dispatcher sends a HOVER_EXIT to the previously hovered window. The view hierarchy behavior is similar. All views under the pointer receive onHoverEvent with HOVER_ENTER followed by any number of HOVER_MOVE events. When the pointer leaves a view, the view receives HOVER_EXIT. Similarly, if a parent view decides to capture hover by returning true from onHoverEvent, the hovered descendants will receive HOVER_EXIT. The default behavior of onHoverEvent is to update the view's hovered state by calling setHovered(true/false). Views can query their current hovered state using isHovered(). For testing purposes, the hovered state is mapped to the pressed drawable state. This will change in a subsequent commit with the introduction of a new hovered drawable state. Change-Id: Ib76a7a90236c8f2c7336e55773acade6346cacbe
2011-03-07 16:56:21 -08:00
void enqueueDispatchEntryLocked(const sp<Connection>& connection,
EventEntry* eventEntry, const InputTarget* inputTarget,
bool resumeWithAppendedMotionSample, int32_t dispatchMode);
Make input dispatcher only ANR for foreground windows. Redesigned the input dispatcher's ANR timeout mechanism so it is much closer to Froyo's policy. ANR is only ever signalled if the dispatcher is waiting on a window to finish processing its previous event(s) and there is new pending input. In the old code, we tracked the dispatch timeout separately for each input channel. This was somewhat complicated and also resulted in the situation where applications could ANR long after the user had pushed them into the background. Change-Id: I666ecada0952d4b95f1d67b9f733842b745c7f4b
2010-09-15 15:18:56 -07:00
void startDispatchCycleLocked(nsecs_t currentTime, const sp<Connection>& connection);
Tell system server whether the app handled input events. Refactored ViewRoot, NativeActivity and related classes to tell the dispatcher whether an input event was actually handled by the application. This will be used to move more of the global default key processing into the system server instead of the application. Change-Id: If06b98b6f45c543e5ac5b1eae2b3baf9371fba28
2010-11-05 15:02:16 -07:00
void finishDispatchCycleLocked(nsecs_t currentTime, const sp<Connection>& connection,
bool handled);
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
void startNextDispatchCycleLocked(nsecs_t currentTime, const sp<Connection>& connection);
Fix input channel leak. Bug: 5156144 Input channels could leak or simply live longer than they should in some cases. 1. Monitor channels (used by the pointer location overlay) are never unregistered, so they would leak. Added code to handle failures in the receive callback by closing the input channel. 2. The DragState held onto its input window and application handles even after the input channel was disposed. Added code to null these handles out when they are no longer needed. 3. Input channels previously used as input event targets would stick around until the targets were cleared (usually on the next event). Added code to detect when the input dispatcher is in an idle state and to proactively clear the targets then to ensure that resources are released promptly. 4. Native input window handles held onto the input channel even after the input window was removed from the input dispatcher. Consequently, the input channel would not be disposed until the input window handle itself was freed. Since the input window handle is held from managed code, this meant that the window's input channel could stick around until the next GC. Refactored the input window handle to separate the properties (info) and identify (handle) state into different objects. Then modified the dispatcher to release the properties (info) when no longer needed, including the input channel. 7. The pointer location overlay does not actually use its standard input channel, only the monitor input channel. Added INPUT_FEATURE_NO_INPUT_CHANNEL to allow windows to request that they not be provided with an input channel at all. Improved some of the error handling logic to emit the status code as part of the exception message. Change-Id: I01988d4391a70c6678c8b0e936ca051af680b1a5
2011-08-30 20:34:48 -07:00
void abortBrokenDispatchCycleLocked(nsecs_t currentTime, const sp<Connection>& connection,
bool notify);
Make input dispatcher only ANR for foreground windows. Redesigned the input dispatcher's ANR timeout mechanism so it is much closer to Froyo's policy. ANR is only ever signalled if the dispatcher is waiting on a window to finish processing its previous event(s) and there is new pending input. In the old code, we tracked the dispatch timeout separately for each input channel. This was somewhat complicated and also resulted in the situation where applications could ANR long after the user had pushed them into the background. Change-Id: I666ecada0952d4b95f1d67b9f733842b745c7f4b
2010-09-15 15:18:56 -07:00
void drainOutboundQueueLocked(Connection* connection);
Replace epoll() with poll() and rename PollLoop to Looper. As part of this change, consolidated and cleaned up the Looper API so that there are fewer distinctions between the NDK and non-NDK declarations (no need for two callback types, etc.). Removed the dependence on specific constants from sys/poll.h such as POLLIN. Instead looper.h defines events like LOOPER_EVENT_INPUT for the events that it supports. That should help make any future under-the-hood implementation changes easier. Fixed a couple of compiler warnings along the way. Change-Id: I449a7ec780bf061bdd325452f823673e2b39b6ae
2010-09-13 23:17:30 -07:00
static int handleReceiveCallback(int receiveFd, int events, void* data);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
Added more robust tracking and cancelation of events. This change fixes several issues where events would be dropped in the input dispatch pipeline in such a way that the dispatcher could not accurately track the state of the input device. Given more robust tracking, we can now also provide robust cancelation of input events in cases where an application might otherwise become out of sync with the event stream due to ANR, app switch, policy decisions, or forced focus transitions. Pruned some of the input dispatcher log output. Moved the responsibility for calling intercept*BeforeQueueing into the input dispatcher instead of the input reader and added support for early interception of injected events for events coming from trusted sources. This enables behaviors like injection of media keys while the screen is off, haptic feedback of injected virtual keys, so injected events become more "first class" in a way. Change-Id: Iec6ff1dd21e5f3c7feb80ea4feb5382bd090dbd9
2010-10-08 22:31:17 -07:00
void synthesizeCancelationEventsForAllConnectionsLocked(
Support chorded fallback keys. Also be more careful about canceling fallback keys during focus transitions, when the application handles the key, or when the policy decides to do something different. Fixed a crash due to JNI CallObjectMethod returning an undefined value (not null) when an exception is thrown. Fixed a crash due to the policy trying to create a Dialog for recent apps on the dispatcher thread. It should happen on the policy's Looper instead. Bug: 4187302 Change-Id: I659a3fd1bd2325ed36d965f9beb75dacb89790c9
2011-03-29 15:11:34 -07:00
const CancelationOptions& options);
Added more robust tracking and cancelation of events. This change fixes several issues where events would be dropped in the input dispatch pipeline in such a way that the dispatcher could not accurately track the state of the input device. Given more robust tracking, we can now also provide robust cancelation of input events in cases where an application might otherwise become out of sync with the event stream due to ANR, app switch, policy decisions, or forced focus transitions. Pruned some of the input dispatcher log output. Moved the responsibility for calling intercept*BeforeQueueing into the input dispatcher instead of the input reader and added support for early interception of injected events for events coming from trusted sources. This enables behaviors like injection of media keys while the screen is off, haptic feedback of injected virtual keys, so injected events become more "first class" in a way. Change-Id: Iec6ff1dd21e5f3c7feb80ea4feb5382bd090dbd9
2010-10-08 22:31:17 -07:00
void synthesizeCancelationEventsForInputChannelLocked(const sp<InputChannel>& channel,
Support chorded fallback keys. Also be more careful about canceling fallback keys during focus transitions, when the application handles the key, or when the policy decides to do something different. Fixed a crash due to JNI CallObjectMethod returning an undefined value (not null) when an exception is thrown. Fixed a crash due to the policy trying to create a Dialog for recent apps on the dispatcher thread. It should happen on the policy's Looper instead. Bug: 4187302 Change-Id: I659a3fd1bd2325ed36d965f9beb75dacb89790c9
2011-03-29 15:11:34 -07:00
const CancelationOptions& options);
Added more robust tracking and cancelation of events. This change fixes several issues where events would be dropped in the input dispatch pipeline in such a way that the dispatcher could not accurately track the state of the input device. Given more robust tracking, we can now also provide robust cancelation of input events in cases where an application might otherwise become out of sync with the event stream due to ANR, app switch, policy decisions, or forced focus transitions. Pruned some of the input dispatcher log output. Moved the responsibility for calling intercept*BeforeQueueing into the input dispatcher instead of the input reader and added support for early interception of injected events for events coming from trusted sources. This enables behaviors like injection of media keys while the screen is off, haptic feedback of injected virtual keys, so injected events become more "first class" in a way. Change-Id: Iec6ff1dd21e5f3c7feb80ea4feb5382bd090dbd9
2010-10-08 22:31:17 -07:00
void synthesizeCancelationEventsForConnectionLocked(const sp<Connection>& connection,
Support chorded fallback keys. Also be more careful about canceling fallback keys during focus transitions, when the application handles the key, or when the policy decides to do something different. Fixed a crash due to JNI CallObjectMethod returning an undefined value (not null) when an exception is thrown. Fixed a crash due to the policy trying to create a Dialog for recent apps on the dispatcher thread. It should happen on the policy's Looper instead. Bug: 4187302 Change-Id: I659a3fd1bd2325ed36d965f9beb75dacb89790c9
2011-03-29 15:11:34 -07:00
const CancelationOptions& options);
Added more robust tracking and cancelation of events. This change fixes several issues where events would be dropped in the input dispatch pipeline in such a way that the dispatcher could not accurately track the state of the input device. Given more robust tracking, we can now also provide robust cancelation of input events in cases where an application might otherwise become out of sync with the event stream due to ANR, app switch, policy decisions, or forced focus transitions. Pruned some of the input dispatcher log output. Moved the responsibility for calling intercept*BeforeQueueing into the input dispatcher instead of the input reader and added support for early interception of injected events for events coming from trusted sources. This enables behaviors like injection of media keys while the screen is off, haptic feedback of injected virtual keys, so injected events become more "first class" in a way. Change-Id: Iec6ff1dd21e5f3c7feb80ea4feb5382bd090dbd9
2010-10-08 22:31:17 -07:00
Add suuport for splitting touch events across windows. This feature is currently used to enable dragging the start and end selection handles of a TextView at the same time. Could be used for other things later. Deleted some dead code in ArrowKeyMovementMethod and CursorControllers. Change-Id: I930accd97ca1ca1917aab8a807db2c950fc7b409
2010-09-26 22:20:12 -07:00
// Splitting motion events across windows.
MotionEntry* splitMotionEvent(const MotionEntry* originalMotionEntry, BitSet32 pointerIds);
Drop all dispatcher state when dispatcher is disabled. This patch makes the dispatcher drop all of its state when it is disabled (when the screen turns off). This ensures that the dispatcher does not get stuck thinking a pointer is still down if the screen turned off while the user was touching the display (such as a fat touch while hitting the power button). Bug: 3098344 Change-Id: If50ef5804870aa1acd3179fd4b40e3cda58dd39d
2010-10-27 18:43:51 -07:00
// Reset and drop everything the dispatcher is doing.
void resetAndDropEverythingLocked(const char* reason);
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
// Dump state.
void dumpDispatchStateLocked(String8& dump);
void logDispatchStateLocked();
Fix input channel leak. Bug: 5156144 Input channels could leak or simply live longer than they should in some cases. 1. Monitor channels (used by the pointer location overlay) are never unregistered, so they would leak. Added code to handle failures in the receive callback by closing the input channel. 2. The DragState held onto its input window and application handles even after the input channel was disposed. Added code to null these handles out when they are no longer needed. 3. Input channels previously used as input event targets would stick around until the targets were cleared (usually on the next event). Added code to detect when the input dispatcher is in an idle state and to proactively clear the targets then to ensure that resources are released promptly. 4. Native input window handles held onto the input channel even after the input window was removed from the input dispatcher. Consequently, the input channel would not be disposed until the input window handle itself was freed. Since the input window handle is held from managed code, this meant that the window's input channel could stick around until the next GC. Refactored the input window handle to separate the properties (info) and identify (handle) state into different objects. Then modified the dispatcher to release the properties (info) when no longer needed, including the input channel. 7. The pointer location overlay does not actually use its standard input channel, only the monitor input channel. Added INPUT_FEATURE_NO_INPUT_CHANNEL to allow windows to request that they not be provided with an input channel at all. Improved some of the error handling logic to emit the status code as part of the exception message. Change-Id: I01988d4391a70c6678c8b0e936ca051af680b1a5
2011-08-30 20:34:48 -07:00
// Registration.
void removeMonitorChannelLocked(const sp<InputChannel>& inputChannel);
status_t unregisterInputChannelLocked(const sp<InputChannel>& inputChannel, bool notify);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
// Add or remove a connection to the mActiveConnections vector.
void activateConnectionLocked(Connection* connection);
void deactivateConnectionLocked(Connection* connection);
// Interesting events that we might like to log or tell the framework about.
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 01:31:58 -07:00
void onDispatchCycleStartedLocked(
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-17 20:52:56 -07:00
nsecs_t currentTime, const sp<Connection>& connection);
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 01:31:58 -07:00
void onDispatchCycleFinishedLocked(
Tell system server whether the app handled input events. Refactored ViewRoot, NativeActivity and related classes to tell the dispatcher whether an input event was actually handled by the application. This will be used to move more of the global default key processing into the system server instead of the application. Change-Id: If06b98b6f45c543e5ac5b1eae2b3baf9371fba28
2010-11-05 15:02:16 -07:00
nsecs_t currentTime, const sp<Connection>& connection, bool handled);
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 01:31:58 -07:00
void onDispatchCycleBrokenLocked(
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-17 20:52:56 -07:00
nsecs_t currentTime, const sp<Connection>& connection);
Make input dispatcher only ANR for foreground windows. Redesigned the input dispatcher's ANR timeout mechanism so it is much closer to Froyo's policy. ANR is only ever signalled if the dispatcher is waiting on a window to finish processing its previous event(s) and there is new pending input. In the old code, we tracked the dispatch timeout separately for each input channel. This was somewhat complicated and also resulted in the situation where applications could ANR long after the user had pushed them into the background. Change-Id: I666ecada0952d4b95f1d67b9f733842b745c7f4b
2010-09-15 15:18:56 -07:00
void onANRLocked(
Refactor input dispatcher use of window/app handles. This change moves the cached window and application input state into the handle objects themselves. It simplifies the dispatcher somewhat because it no longer needs to fix up references to transient InputWindow objects each time the window list is updated. This change will also make it easier to optimize setInputWindows to avoid doing a lot of redundant data copying. In principle, only the modified fields need to be updated. However, for now we continue to update all fields in unison as before. It turns out that the input dispatcher was inappropriately retaining pointers to InputWindow objects within the mWindows InputWindow vector. This vector is copy-on-write so it is possible and the item pointers to change if an editing operation is performed on the vector when it does not exclusively own the underlying SharedBuffer. This bug was uncovered by a previous change that replaced calls to clear() and appendVector() with a simple use of operator= which caused the buffer to be shared. Consequently after editItemAt was called (which it shouldn't have, actually) the buffer was copied and the cached InputWindow pointers became invalid. Oops. This change fixes the problem. Change-Id: I0a259339a6015fcf9113dc4081a6875e047fd425
2011-07-13 22:51:29 -07:00
nsecs_t currentTime, const sp<InputApplicationHandle>& applicationHandle,
const sp<InputWindowHandle>& windowHandle,
Make input dispatcher only ANR for foreground windows. Redesigned the input dispatcher's ANR timeout mechanism so it is much closer to Froyo's policy. ANR is only ever signalled if the dispatcher is waiting on a window to finish processing its previous event(s) and there is new pending input. In the old code, we tracked the dispatch timeout separately for each input channel. This was somewhat complicated and also resulted in the situation where applications could ANR long after the user had pushed them into the background. Change-Id: I666ecada0952d4b95f1d67b9f733842b745c7f4b
2010-09-15 15:18:56 -07:00
nsecs_t eventTime, nsecs_t waitStartTime);
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 01:31:58 -07:00
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-17 20:52:56 -07:00
// Outbound policy interactions.
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
void doNotifyConfigurationChangedInterruptible(CommandEntry* commandEntry);
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 01:31:58 -07:00
void doNotifyInputChannelBrokenLockedInterruptible(CommandEntry* commandEntry);
Make input dispatcher only ANR for foreground windows. Redesigned the input dispatcher's ANR timeout mechanism so it is much closer to Froyo's policy. ANR is only ever signalled if the dispatcher is waiting on a window to finish processing its previous event(s) and there is new pending input. In the old code, we tracked the dispatch timeout separately for each input channel. This was somewhat complicated and also resulted in the situation where applications could ANR long after the user had pushed them into the background. Change-Id: I666ecada0952d4b95f1d67b9f733842b745c7f4b
2010-09-15 15:18:56 -07:00
void doNotifyANRLockedInterruptible(CommandEntry* commandEntry);
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
void doInterceptKeyBeforeDispatchingLockedInterruptible(CommandEntry* commandEntry);
Tell system server whether the app handled input events. Refactored ViewRoot, NativeActivity and related classes to tell the dispatcher whether an input event was actually handled by the application. This will be used to move more of the global default key processing into the system server instead of the application. Change-Id: If06b98b6f45c543e5ac5b1eae2b3baf9371fba28
2010-11-05 15:02:16 -07:00
void doDispatchCycleFinishedLockedInterruptible(CommandEntry* commandEntry);
Add initial API for stylus and mouse buttons. Added the concept of pointer properties in a MotionEvent. This is currently used to track the pointer tool type to enable applications to distinguish finger touches from a stylus. Button states are also reported to application as part of touch events. There are no new actions for detecting changes in button states. The application should instead query the button state from the MotionEvent and take appropriate action as needed. A good time to check the button state is on ACTION_DOWN. As a side-effect, applications that do not support multiple buttons will treat primary, secondary and tertiary buttons identically for all touch events. The back button on the mouse is mapped to KEYCODE_BACK and the forward button is mapped to KEYCODE_FORWARD. Added basic plumbing for the secondary mouse button to invoke the context menu, particularly in lists. Added clamp and split methods on MotionEvent to take care of common filtering operations so we don't have them scattered in multiple places across the framework. Bug: 4260011 Change-Id: Ie992b4d4e00c8f2e76b961da0a902145b27f6d83
2011-05-06 18:20:01 -07:00
bool afterKeyEventLockedInterruptible(const sp<Connection>& connection,
DispatchEntry* dispatchEntry, KeyEntry* keyEntry, bool handled);
bool afterMotionEventLockedInterruptible(const sp<Connection>& connection,
DispatchEntry* dispatchEntry, MotionEntry* motionEntry, bool handled);
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
void doPokeUserActivityLockedInterruptible(CommandEntry* commandEntry);
Tell system server whether the app handled input events. Refactored ViewRoot, NativeActivity and related classes to tell the dispatcher whether an input event was actually handled by the application. This will be used to move more of the global default key processing into the system server instead of the application. Change-Id: If06b98b6f45c543e5ac5b1eae2b3baf9371fba28
2010-11-05 15:02:16 -07:00
void initializeKeyEvent(KeyEvent* event, const KeyEntry* entry);
Make input dispatcher only ANR for foreground windows. Redesigned the input dispatcher's ANR timeout mechanism so it is much closer to Froyo's policy. ANR is only ever signalled if the dispatcher is waiting on a window to finish processing its previous event(s) and there is new pending input. In the old code, we tracked the dispatch timeout separately for each input channel. This was somewhat complicated and also resulted in the situation where applications could ANR long after the user had pushed them into the background. Change-Id: I666ecada0952d4b95f1d67b9f733842b745c7f4b
2010-09-15 15:18:56 -07:00
// Statistics gathering.
void updateDispatchStatisticsLocked(nsecs_t currentTime, const EventEntry* entry,
int32_t injectionResult, nsecs_t timeSpentWaitingForApplication);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-22 18:58:52 -07:00
};
/* Enqueues and dispatches input events, endlessly. */
class InputDispatcherThread : public Thread {
public:
explicit InputDispatcherThread(const sp<InputDispatcherInterface>& dispatcher);
~InputDispatcherThread();
private:
virtual bool threadLoop();
sp<InputDispatcherInterface> mDispatcher;
};
} // namespace android
Input dispatcher ANR handling enhancements. This change is essentially a rewrite of the main input dispatcher loop with the target identification folded in. Since the input dispatcher now has all of the window state, it can make better decisions about when to ANR. Added a .5 second deadline for processing app switch keys. This behavior predates Gingerbread but had not previously been ported. Fixed some timing inaccuracies in the ANR accounting that could cause applications to ANR sooner than they should have. Added a mechanism for tracking key and motion events that have been dispatched to a window so that appropriate cancelation events can be synthesized when recovering from ANR. This change helps to keep applications in sync so they don't end up with stuck buttons upon recovery from ANRs. Added more comments to describe the tricky parts of PollLoop. Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
2010-09-08 11:49:43 -07:00
#endif // _UI_INPUT_DISPATCHER_H
Reference in New Issue Copy Permalink